20.4.1 List of environment setting parameters for the scheduler service environment

To set up the scheduler service environment, perform the necessary setup operations in the manager environment (JP1/AJS3 - Manager). Nothing is required in the agent environment (JP1/AJS3 - Agent).

The table below describes the environment setting parameters to be used to set the scheduler service environment in the manager environment (JP1/AJS3 - Manager).

To determine whether an environment setting parameter is to be set in Windows or UNIX, see the Applicable OS column.

Table 20‒2: Environment setting parameters (scheduler service environment setup)
No.	Definition key	Environment setting parameter	Definition	Applicable OS	Applicable product
1	`[JP1_DEFAULT\JP1AJSMANAGER]`	`"DEFAULTSERVICENAME"=`^#1	The name of the default scheduler service	Windows UNIX	M
2		`"REMNETSERVICENAME"=`^#1	The name of the scheduler service that executes a remote jobnet	Windows UNIX	M
3		`"TRACELOGFILE"=`^#1	The name of the scheduler trace log file	Windows UNIX	M
4		`"TRACELOGDIV"=`	Specifies the method to output a scheduler trace log (whether to output a trace log per scheduler service).	Windows UNIX	M
5		`"VRSHIFT_IMMINT"=`^#1	Whether a jobnet stops immediately when it is interrupted or killed	Windows UNIX	M
6		`"VRSHIFT_INTRERUN"=`^#1	Whether succeeding units are rerun when a jobnet is interrupted	Windows UNIX	M
7		`"IPC_TIMEOUT"=`^#1	Remote communication timeout	Windows UNIX	M
8		`"IPC_LOCALTIMEOUT"=`^#1	Local communication timeout	Windows UNIX	M
9		`"IPCRETRYINTERVAL"=`^#1	Retry interval	Windows UNIX	M
10		`"IPCRETRYCOUNT"=`^#1	Retry count	Windows UNIX	M
11		`"EVENTRETRY"=`^#1	The action to be taken for an event service connection failure	Windows UNIX	M
12		`"REUSELOGON"=`^#1	The method used to start the logon-session process	Windows	M
13		`"LOGONSHMAX"=`^#1	The number of sessions that can share logon resources	Windows	M
14	`[{JP1_DEFAULT\|logical-host-name}\JP1AJSMANAGER]`^#2	`"MAXSESSION"=`	The maximum number of simultaneous sessions	Windows UNIX	M
15		`"AJSINETDLOGSIZE"=`	The size of the ajsinetd internal log	Windows UNIX	M
16		`"MONLOG"=`^#1	Whether messages related to the connection and disconnection of JP1/AJS3 - View and JP1/AJS3 - Web Console to and from the scheduler service are to be output to the scheduler log	Windows UNIX	M
17		`"MONSYSLOG"=`	In Windows: Whether messages related to starting and terminating the `ajsinetd` processes, and connecting and disconnecting JP1/AJS3 - View are to be output to the Windows event log and integrated trace log In UNIX: Whether messages related to starting and terminating the `ajsinetd` processes, and connecting and disconnecting JP1/AJS3 - View are to be output to the syslog and integrated trace log	Windows UNIX	M
18		`"AUTHLOG"=`	Whether messages related to user authentication are to be output to the scheduler log	Windows UNIX	M
19		`"AUTHSYSLOG"=`	In Windows: Whether messages related to user authentication are to be output to the Windows event log and integrated trace log In UNIX: Whether messages related to user authentication are to be output to the syslog and integrated trace log	Windows UNIX	M
20		`"HIDEOTHERLHOST"=`	The scheduler services to be displayed for a login to JP1/AJS3 - View	Windows UNIX	M
21		`"CDMAXSESSION"=`	Maximum number of allowed concurrent sessions for JP1/AJS3 - Web Console	Windows UNIX	M
22		`"AJSCDINETDLOGSIZE"=`	The size of the ajscdinetd internal log	Windows UNIX	M
23		`"CONRESTRICTLOG"=`	Whether messages related to restricting connection sources are to be output to the scheduler log	Windows UNIX	M
24		`"CONRESTRICTSYSLOG"=`	In Windows: Whether messages related to restricting connection sources are to be output to the Windows event log In UNIX: Whether messages related to restricting connection sources are to be output to the syslog	Windows UNIX	M
25		`"HIDEOTHERSERVICE"=`	Whether to prevent the display of a scheduler service without access permissions in JP1/AJS3 - View	Windows UNIX	M
26		`"CHANGEPASSWORD"=`	Whether changing of the JP1 user password is to be permitted in JP1/AJS3 - View	Windows UNIX	M
27		`"CHANGEPWDLOG"=`	Whether messages related to changing of the password are to be output if the JP1 user password change function is enabled in JP1/AJS3 - View	Windows UNIX	M
28	`[{JP1_DEFAULT\|logical-host-name}\JP1AJSMANAGER\scheduler-service-name]`^#2	`"AJSLOGOUTPUTDEST"=`	The output-destination setting for the scheduler log file	Windows UNIX	M
29		`"LOGSIZE"=`	The size of the scheduler log file (when the file is output by a scheduler service)	Windows UNIX	M
30		`"AJSLOGFILE1"=`	The name of scheduler log file 1	Windows UNIX	M
31		`"AJSLOGFILE2"=`	The name of scheduler log file 2	Windows UNIX	M
32		`"LOGDLOG"=`	Whether log data about starting and terminating the scheduler log output process (`ajslogd.exe` for Windows and `ajslogd` for UNIX) is to be output to the scheduler log	Windows UNIX	M
33		`"LOGDSYSLOG"=`	In Windows: Whether log data about starting and terminating the scheduler log output process (`ajslogd.exe`) is to be output to the Windows event log and the integrated trace log In UNIX: Whether log data about starting and terminating the scheduler log output process (`ajslogd`) is to be output to syslog and the integrated trace log	Windows UNIX	M
34		`"AJSLOGOUTPUTYEAR"=`	Whether the year in a scheduler log date is to be output	Windows UNIX	M
35		`"AJSLOGOUTPUTEXTEND"=`	The setting for extended output of a scheduler log	Windows UNIX	M
36		`"AUTOSTART"=`	Whether a scheduler service is to be started automatically	Windows UNIX	M
37		`"SESSIONTIMEOUT"=`	The connection timeout period	Windows UNIX	M
38		`"AJSSERVICEID"=`	The scheduler service identification number	Windows UNIX	M
39		`"ISAMWRITEMODE"=`	The write mode for updating an ISAM file	Windows UNIX	M
40		`"TABLENAMEPREFIX"=`	The table name prefix	Windows UNIX	M
41		`"TABLENAMEPOSTFIX"=`	The table ID	Windows UNIX	M
42		`"RDBAUTHID"=`	The RDB permission identifier	Windows UNIX	M
43		`"RDBUSER"=`	The RDB access user name	Windows UNIX	M
44		`"RDBPASSWORD"=`	The RDB user password	Windows UNIX	M
45		`"RDBCHECKINTERVAL"=`	The RDB server disconnection detection interval	Windows UNIX	M
46		`"RDBHOST"=`	The name of the host at the RDB connection destination	Windows UNIX	M
47		`"RDBPORT"=`	RDB port number	Windows UNIX	M
48		`"RDBIPC"=`	The method used to communicate with the RDB server	Windows UNIX	M
49		`"RDBSENDMEMSIZE"=`	The size of send-data memory for RDB interprocess memory communication	Windows UNIX	M
50		`"RDBRECVMEMSIZE"=`	The size of receive-data memory for RDB interprocess memory communication	Windows UNIX	M
51		`"RDBCONNECTWAITTIME"=`	The maximum wait time for connection to RDB	Windows UNIX	M
52		`"AJSCHARCODE"=`	Character set	Windows UNIX	M
53		`"AJSTMPDIR"=`	The name of the directory for temporary files	Windows UNIX	M
54		`"JOBINFDIR"=`	The name of the directory for job error information	Windows UNIX	M
55		`"AJSBKUROOT"=`	The name of the directory for backup information	Windows UNIX	M
56		`"HNTRLOGLEVEL"=`	The level of the messages to be output to the integrated trace log file	Windows UNIX	M
57		`"SYSLOGCODE"=`	The character set for outputting a log file	UNIX	M
58		`"AJSSYSLOG"=`	In Windows: Whether messages about starting and terminating a scheduler service are to be output to the Windows event log In UNIX: Whether messages about starting and terminating a scheduler service are to be output to the syslog file	Windows UNIX	M
59		`"NETSYSLOG"=`	In Windows: Whether messages about starting and ending a jobnet are to be output to the Windows event log In UNIX: Whether messages about starting and ending a jobnet are to be output to the syslog file	Windows UNIX	M
60		`"JOBSYSLOG"=`	In Windows: Whether messages about starting and ending a job in a jobnet are to be output to the Windows event log In UNIX: Whether messages about starting and ending a job in a jobnet to be output to be output to the syslog file	Windows UNIX	M
61		`"AJSLOG"=`	Whether messages about starting and terminating a scheduler service are to be output to the scheduler log file	Windows UNIX	M
62		`"NETLOG"=`	Whether messages about starting and ending a jobnet are to be output to the scheduler log file	Windows UNIX	M
63		`"JOBLOG"=`	Whether messages about starting and ending a job in a jobnet are to be output to the scheduler log file	Windows UNIX	M
64		`"OPELOG"=`	Whether the operation log is to be output	Windows UNIX	M
65		`"LOGINFOALL"=`	The output format of logs	Windows UNIX	M
66		`"REFLOG"=`	Whether the reference log is to be output	Windows UNIX	M
67		`"LOGHEADER"=`	Whether log information is to be output with the process ID added	Windows UNIX	M
68		`"INFOLOG"=`	Whether the information log is to be output	Windows UNIX	M
69		`"ROOTJOBNETSCHEDULERANGE"=`	The valid range for a root jobnet schedule	Windows UNIX	M
70		`"VIEWSTATUSRANGE"=`	The range of the generation information to be used as the basis for acquiring the status via JP1/AJS3 - View or JP1/AJS3 - Web Console	Windows UNIX	M
71		`"STARTMODE"=`	The startup mode of a scheduler service	Windows UNIX	M
72		`"OVERSCHEDULE"=`	The mode for skipping a jobnet	Windows UNIX	M
73		`"SUPPRESS"=`	Whether the execution of a job in the jobnet and a jobnet is suppressed	Windows UNIX	M
74		`"EXECDEFER"=`	The repeat method of a jobnet	Windows UNIX	M
75		`"JOBSTATUSPORT"=`	The service name of the port used to acquire the job status	Windows UNIX	M
76		`"QUEUELESSMULTIREQ"=`	The maximum number of queueless job requests	Windows UNIX	M
77		`"UNITDEFINERELOAD"=`	Whether the jobnet definition is updated as soon as it is changed	Windows UNIX	M
78		`"MAXSAVEGEN"=`	The maximum number of saved generations	Windows UNIX	M
79		`"AJSPRINTNETSCHPRF"=`	The method for handling the schedule rules of nested jobnets	Windows UNIX	M
80		`"SUBMITRETRYINTERVAL"=`	The retry interval for submit processing	Windows UNIX	M
81		`"JOBEXECIPCBUFSIZE"=`	The size of the job execution information communication buffer for a scheduler service	Windows UNIX	M
82		`"BACKGROUNDLEAVE"=`	The method used to delete generations due to cancellation of registration or management of the number of saved generations	Windows UNIX	M
83		`"REQDAGTREQCONNECTTIMEOUT"=`	The timeout period for communication with the queueless agent service	Windows UNIX	M
84		`"REQDAGTRECONNECTTIMEOUT"=`	The timeout period for recovery processing for communication with a queueless agent service	Windows UNIX	M
85		`"COMMANDEVENT"=`	Whether a JP1 event is issued when a command is executed or when an operation is performed from JP1/AJS3 - View or JP1/AJS3 - Web Console	Windows UNIX	M
86		`"NONRELOADHOLDING"=`	Whether the definition of a unit on hold is reloaded	Windows UNIX	M
87		`"RJCUSE"=`	Whether the execution order of root jobnets spread among different scheduler services is to be controlled by using a jobnet connector	Windows UNIX	M
88		`"JOBDELAYWARNMSG"=`	Whether a start message is to be output to the integrated trace log when a scheduler service is started. The start message is generated when the scheduler service is stopped, if a job whose termination delay is monitored in accordance with a period of time required for the execution restarts its operation in the agent.	Windows UNIX	M
89		`"FGRECONLMT"=`	The number of reconnection attempts when the flow control process cannot communicate with the scheduler service inter-communication control process	Windows UNIX	M
90		`"SAVEGENTYPE"=`	The method for managing the number of logs to keep resulting from the execution of a jobnet for which start conditions are defined	Windows UNIX	M
91		`"AJSDBTYPE"=`	The database type	Windows UNIX	M
92	`"AJSDBDIRECTORY"=`	The name of the database directory	Windows UNIX	M
93	`"AJSSYSDIR"=`	The system folder of each scheduler service	Windows UNIX	M
94	`"AJSLOGDIR"=`	The log folder of each scheduler service	Windows UNIX	M
95	`"PREWAITUSE"=`	Whether wait conditions are used	Windows UNIX	M
96	`"PREWAITEXTEND"=`	Extension of the wait condition function	Windows UNIX	M
97	`"FLBDLOGSIZE"=`	The size of an internal log file for a flow control subprocess	Windows UNIX	M
98	`"AGENTPROFMEMSIZE"=`	The size of memory that can be used by an execution agent profile	Windows UNIX	M
99	`"UNITPROFMEMSIZE"=`	The size of memory that can be used by a unit-attribute profile	Windows UNIX	M
100	`"UNITDEFDIVIDEUPDATE"=`	Whether writing to a database during unit operations is to be divided	Windows UNIX	M
101	`"EXECREGISTRATIONNUMBER"=`	Whether an execution registration number is treated as a calendar date or an execution date	Windows UNIX	M
102	`"SAVEPLANINFO"=`	Whether the temporary-change operation and management functionality are used	Windows UNIX	M
103	`"DEFLENTYPE"=`	The number of characters that can be used in a UTF-8 environment	UNIX	M
104	`"CDSESSIONTIMEOUT"=`	Timeout period for the connection with JP1/AJS3 - Web Console	Windows UNIX	M
105	`"CDMONSVRLOGSIZE"=`	The size of the ajsmonsvr internal log	Windows UNIX	M
106	`"RERUNSUBORDINATE"=`	Whether dependent units are to be re-executed	Windows UNIX	M
107	`"SERVICEMAXSESSION"=`	The maximum allowable number of simultaneous sessions for a scheduler service	Windows UNIX	M
108	`"DEFAULTPRIORITY"=`	Default execution priority of a job	Windows UNIX	M
109	`"AJSPRINTSORTUNITINF"`	The order of relation line information entries to be output when the `ajsprint` command is executed	Windows UNIX	M
110	`"PREWAITRERUNSTATUS"=`	Whether to end waiting when the unit succeeding the waiting-target unit is re-executed	Windows UNIX	M
111	`"NETCOMMENTEVENT"=`	Whether comments about units are to be output for JP1 events whose object type is `JOBNET`	Windows UNIX	M
112	`"JOBCOMMENTEVENT"=`	Whether comments about units are to be output for JP1 events whose object type is `JOB`	Windows UNIX	M
113	`"TRACELOGDIVDIR"=`	The folder to store the trace log files for scheduler services.	Windows UNIX	M
114	`"AJSREPORTUSE"=`	The setting that determines whether the performance report output function is to be used	Windows UNIX	M
115	`"AJSREPORTDIR"=`	The directory to which performance log files are to be output	Windows UNIX	M
116	`"AJSREPORTSTOREDAYPERIOD"=`	The minimum number of days for which performance log files are not deleted	Windows UNIX	M
117	`"ENHANCEDBACKUP"=`	Whether to use the function that creates a backup during operation (backup enhancement function)	Windows UNIX	M
118	`"CONDGENWARNINT"=`	The interval for checking the number of retained execution generations of the jobnets with start conditions before a message is output	Windows UNIX	M
119	`"CONDGENWARNNUM"=`	The threshold for the number of retained execution generations of the jobnets with start conditions	Windows UNIX	M
120	`"MULTIMONWARNNUM"=`	The threshold for the number of monitoring generations whose status is Now monitoring in a jobnet with start conditions	Windows UNIX	M
121	`"FLSTARTPERFIMP"=`	Whether to improve the startup processing of the scheduler service	Windows UNIX	M
122	`"PREWAITNOSCHUNITS"=`	If wait conditions are set for a unit that is not scheduled for execution, the setting of this item determines whether a wait occurs when the unit satisfies its execution conditions (for example, execution of the preceding job or jobnet ends).	Windows UNIX	M
123	`[JP1_DEFAULT\JP1AJSMANAGER\scheduler-service-name]`	`"AJSODBC_DSNAME"=`	The ODBC file data source name	Windows Linux	M
124		`"AJSODBC_DBNAME"=`	The database name	Windows Linux	M
125		`"STDFILEOUTDIR"=`	The name of the directory in which standard output files and standard error output files are stored	Windows Linux	M
126	`[{JP1_DEFAULT\|logical-host-name}\JP1AJS2\GATEWAY]`^#2	`"GWMAXCONNECTION"=`	The maximum number of concurrent connections for the scheduler service inter-communication control process (ajsgwd.exe for Windows and ajsgwd for UNIX)	Windows UNIX	M
127		`"GWPROCESSHA"=`	Whether the process that manages the scheduler service inter-communication control process (ajsgwmasterd.exe for Windows and ajsgwmasterd for UNIX) terminates when the scheduler service inter-communication control process (ajsgwd.exe in Windows and ajsgwd in UNIX) terminates abnormally	Windows UNIX	M
128		`"GWRESTARTCOUNT"=`	The number of times automatic restart is to be attempted when the scheduler service inter-communication control process terminates abnormally	Windows UNIX	M

Legend:: M: JP1/AJS3 - Manager
#1: Specify this item directly under the [JP1_DEFAULT\JP1AJSMANAGER] key.
#2: Specify JP1_DEFAULT for the physical host. For logical-host-name, specify the name of a logical host.

Important

You can specify a maximum of 20 scheduler services for the physical and logical hosts on a machine. Specify a service name that is unique among all physical hosts of the local host and all logical hosts. For the service name, specify a character string of no more than 30 bytes. You can use alphanumeric characters and the following symbols:

!, #, $, %, +, - (hyphen), . (period)^#, _ (underscore)

#: In Windows, do not use a period (.) at the end of the service name.

Do not use multi-byte characters, single-byte kana characters, or any symbols other than those above.

If you use an invalid character, the command interpreter will not correctly recognize the scheduler service name when it analyzes the command line, and a failure might occur.

Parameters that are not described here are used for maintenance purposes. Do not change the values of those parameters.

To Page Top