4.1 Messages : JP1/Navigation Platform Messages

KDCZ50650-I

The Navigation Platform Start Service will start.

Cause: The "Navigation Platform Start Service" service is starting.

KDCZ50651-I

The Navigation Platform Start Service was started.

Cause: The "Navigation Platform Start Service" service has started.

KDCZ50652-I

The Navigation Platform Start Service will stop.

Cause: The "Navigation Platform Start Service" service is stopping.

KDCZ50653-I

The Navigation Platform Start Service was stopped.

Cause: The "Navigation Platform Start Service" service has stopped.

KDCZ50654-E

An internal error occurred in the Navigation Platform Start Service.

details:

error-message-of-the-command-or-internal-function

Cause

An internal error occurred in the "Navigation Platform Start Service" service.

Action

Eliminate the cause of the error based on the detailed information, and then execute the stop command. After that, restart the service.

If the problem persists, contact your customer support center.

KDCZ50655-E

Navigation Platform cannot be started. (cause = cause-of-the-error)

Cause

Navigation Platform could not start.

Action

Eliminate the source of the error based on the root cause, and then restart the service.

If the problem persists, contact your customer support center.

KDCZ50656-E

An error occurred while starting Navigation Platform.

details:

message-of-the-command

Cause

An error occurred while Navigation Platform was starting.

Action

Eliminate the cause of the error based on the detailed information, and then restart the service.

If the problem persists, contact your customer support center.

KDCZ50657-E

An error occurred while stopping Navigation Platform.

details:

message-of-the-command

Cause

An error occurred while Navigation Platform was stopping.

Action

Eliminate the cause of the error based on the detailed information, and then restart the service.

If the problem persists, contact your customer support center.

KDCZ50668-I

The Navigation Platform J2EE Server service will start.

Cause: The Navigation Platform J2EE Server service is starting.

KDCZ50669-I

The Navigation Platform J2EE Server service was started.

Cause: The Navigation Platform J2EE Server service has started.

KDCZ50670-I

The Navigation Platform J2EE Server service will stop.

Cause: The Navigation Platform J2EE Server service is stopping.

KDCZ50671-I

The Navigation Platform J2EE Server service was stopped.

Cause: The Navigation Platform J2EE Server service has stopped.

KDCZ50672-E

An internal error occurred in the Navigation Platform J2EE Server service.

details:

error-message-of-the-command-or-internal-function

Cause

An internal error occurred in the Navigation Platform J2EE Server service.

Action

Eliminate the cause of the error based on the detailed information, and then restart the Navigation Platform J2EE Server service.

If the problem persists, contact your customer support center.

KDCZ50673-E

The-PRF-daemon-or-the-J2EE-server-or-the-Dashboard-Web-Service cannot be started. (cause = cause-of-the-error)

Cause

The following are possible causes:

The PRF daemon cannot be started.
The J2EE server cannot be started.
The Dashboard Web Service cannot be started.

Action

Eliminate the source of the error based on the root cause, and then restart the service that could not be started ("Navigation Platform Start Service" service or "Dashboard Web Service" service).

If the problem persists, contact your customer support center.

KDCZ50674-E

An error occurred while starting the-PRF-daemon-or-the-J2EE-server.

details:

message-of-the-command

Cause

An error occurred while the PRF daemon or J2EE server was starting.

Action

Eliminate the cause of the error based on the detailed information in this message, and then restart the "Navigation Platform Start Service" service.

If the problem persists, contact your customer support center.

KDCZ50675-E

An error occurred while stopping the-PRF-daemon-or-the-J2EE-server.

details:

message-of-the-command

Cause

An error occurred while the PRF daemon or J2EE server was stopping.

Action

Eliminate the source of the error based on the root cause, and then restart the "Navigation Platform Start Service" service.

If the problem persists, contact your customer support center.

KDCZ50676-E

The PRF-daemon-or-the-J2EE-server being monitored was stopped. The Navigation Platform J2EE Server service will stop. (exit code = exit-code-of-the-PRF-daemon-or-the-J2EE-server!d!)

Cause

The PRF daemon or J2EE server has stopped.

Action

Eliminate the cause of the error based on the trace log from the stopped PRF daemon or J2EE server, and then restart the Navigation Platform J2EE Server service.

If the problem persists, contact your customer support center.

KDCZ50678-E

An internal error occurred. (cause = error-message (error-number!d!))

Cause

An internal error occurred.

Action

Eliminate the cause of the error based on the message, and then try again.

If the problem persists, contact your customer support center.

KDCZ50679-E

MFC initialization failed.

Cause

An attempt to initialize MFC (Microsoft Foundation Classes) failed.

Action

Because the environment might be incorrect, re-install Navigation Platform.

If the problem persists, contact your customer support center.

KDCZ50680-E

Access was refused.

Cause: Access was denied.
Action: Execute the command as a user with Windows administrator permissions.

KDCZ50681-E

The dependent service does not exist.

Cause

A service that is a dependency source does not exist.

Action

If the service provided by Navigation Platform has not been registered, re-install Navigation Platform.

If the problem persists, contact your customer support center.

KDCZ50682-E

The dependence destination service does not exist.

Cause

A service that is a dependency target does not exist.

Action

If the service provided by Navigation Platform has not been registered, re-install Navigation Platform.

If the problem persists, contact your customer support center.

KDCZ50683-I

The service properties were set. (Details: property key = specified-property-key, setting value = specified-property-value)

Cause: The properties for the service properties file (ucnp_service.ini) were set successfully.

KDCZ50684-W

The service property is invalid. (Details: property key = property-key, specified value = specified-value, specifiable value or range = specifiable-value-or-range, applied value = applied-property-value)

Cause: The value of a property set in the service properties file (ucnp_service.ini) is invalid.
Action: Correct the setting based on the property value that was output.

KDCZ50685-I

The Navigation Platform Dashboard Web Service will start.

Cause: The "Navigation Platform Dashboard Web Service" service is starting.

KDCZ50686-I

The Navigation Platform Dashboard Web Service was started.

Cause: The "Navigation Platform Dashboard Web Service" service has started.

KDCZ50687-I

The Navigation Platform Dashboard Web Service will stop.

Cause: The "Navigation Platform Dashboard Web Service" service is stopping.

KDCZ50688-I

The Navigation Platform Dashboard Web Service was stopped.

Cause: The "Navigation Platform Dashboard Web Service" service has stopped.

KDCZ50689-E

An internal error occurred in the Navigation Platform Dashboard Web Service.

details:

error-message-of-the-command-or-internal-function

Cause

An internal error occurred in the "Navigation Platform Dashboard Web Service" service.

Action

Eliminate the cause of the error as indicated by the detailed information, and then restart the "Navigation Platform Dashboard Web Service" service.

If the problem persists, contact your customer support center.

KDCZ50690-E

An error occurred while starting the-Dashboard-Web-Service.

details:

message-of-the-command

Cause

An error occurred while the Dashboard Web Service was starting.

Action

Eliminate the cause of the error as indicated by the detailed information, and then restart the "Navigation Platform Dashboard Web Service" service.

If the problem persists, contact your customer support center.

KDCZ50691-E

The-Dashboard-Web-Service being monitored was stopped. The Navigation Platform Dashboard Web Service will stop. (exit code = exit-code-of-the-Dashboard-Web-Service!d!)

Cause

The Dashboard Web Service has stopped.

Action

Restart the "Navigation Platform Dashboard Web Service" service.

If the problem persists, contact your customer support center.

KDCZ50692-E

An error occurred while stopping the-Dashboard-Web-Service.

details:

message-of-the-command

Cause

An error occurred while the Dashboard Web Service was stopping.

Action

Eliminate the cause of the error as indicated by the detailed information, and then restart the OS.

If the problem persists, contact your customer support center.

KDCZ50693-E

Another Navigation Platform command is currently being executed. If no command is being executed, delete the exclusive lock directory. (path of the exclusive lock directory = path of the exclusive lock directory)

Cause: A command is being executed on another Navigation Platform.
Action: If no executing command is found, delete the exclusive lock directory.

KDCZ50695-E

The checking of the product information failed. (code = error-code-output-when-the-check-failed)

Cause: An attempt to check product information failed.
Action: Contact your customer support center.

KDCZ50696-E

The acquisition the path of the system folder failed.

Cause: An attempt to acquire the path to the system folder failed.
Action: Restart the "Navigation Platform J2EE Server" service. If the problem persists, contact your customer support center.

KDCZ50801-E

This command cannot be executed because you do not have admin privileges.

Cause: The command cannot be processed because the user who executed it does not have administrator permissions on Windows.
Action: Execute the command as a user with Windows administrator permissions.

KDCZ50805-I

Usage: npsetup

Cause: This message shows the format of the command npsetup.
Action: Execute the command in accordance with the format that is shown.

KDCZ50806-I

Usage: npunsetup

Cause: This message shows the format of the command npunsetup.
Action: Execute the command in accordance with the format that is shown.

KDCZ50807-I

Usage: npstart

Cause: This message shows the format of the command npstart.
Action: Execute the command in accordance with the format that is shown.

KDCZ50846-I

The unsetup of Navigation Platform will start.

Cause: Unsetup of Navigation Platform is being performed.

KDCZ50847-Q

Do you want to continue? (Y/N)

Cause: This message asks if you want to proceed with the processing.
Action: Enter Y or y to proceed with the processing, or enter N or n to abort the processing.

KDCZ50848-I

The setup command finished successfully.

Cause: The command npsetup terminated successfully.

KDCZ50849-I

The unsetup command finished successfully.

Cause: The command npunsetup terminated successfully.

KDCZ50850-I

The start command finished successfully.

Cause: The command npstart terminated successfully.

KDCZ50851-I

The stop command finished successfully.

Cause: The command npstop terminated successfully.

KDCZ50852-I

Usage: npstop [-f]

Cause: This message shows the format of the command npstop.
Action: Execute the command in accordance with the format that is shown.

KDCZ50853-E

The environment variables required to operate Navigation Platform are not set.

Cause

An environment variable required for operation of Navigation Platform has not been set.

Action

If the OS did not restart after installation, restart it. If the error re-occurs after the restart, re-install Navigation Platform.

If the same error re-occurs after the re-installation, contact your customer support center.

KDCZ50855-E

Failed to read the user setup property file. Make sure that you have the required access rights for the displayed path. (path of user setup property file = absolute-path-of-the-user-setup-property-file)

Cause: An attempt to read the user setup property file failed.
Action: Check that you have access permissions for the path displayed in the message, and then re-execute the command.

KDCZ50856-E

The user setup property is invalid. Correct the property with a specifiable value. (property = key-of-the-invalid-user-setup-property-value, specified value = specified-value, specifiable value = specifiable-value)

Cause: An impermissible value was specified in the user setup property file.
Action: Correct the value of the property displayed in the message, and then re-execute the command.

KDCZ50857-E

Failed to set up Navigation Platform.

Cause

An error occurred during Navigation Platform setup processing.

Action

After eliminating the cause of the error based on the error message that was output together with this message, perform unsetup from Navigation Platform, and then re-execute the command npsetup.

If the cause of the error cannot be elimininated, contact your customer support center.

KDCZ50858-E

The unsetup of Navigation Platform failed.

Cause

An error occurred during Navigation Platform unsetup processing.

Action

Perform unsetup of Navigation Platform using the following procedure:

Restart the OS.
Delete the files in Navigation-Platform-installation-directory\spool\ucnpstatus.
Uninstall Navigation Platform.
Delete Navigation-Platform-installation-directory.

KDCZ50859-E

Failed to start Navigation Platform.

Cause

An error occurred while Navigation Platform was starting.

Action

After eliminating the cause of the error based on the error message that was output together with this message, stop Navigation Platform, and then re-execute the command npstart.

If the cause of the error cannot be elimininated, contact your customer support center.

KDCZ50860-E

Failed to stop Navigation Platform.

Cause

An error occurred while Navigation Platform was stopping.

Action

After eliminating the cause of the error based on the error message that was output together with this message, re-execute the command npstop.

If the cause of the error cannot be elimininated, contact your customer support center.

KDCZ50999-E

The command ended with an error.

Cause: The command terminated with an error.
Action: Eliminate the cause of the error based on the message that was output together with this message.

KDCZ58006-E

Failed to set the system common definition file for the database. (Details: message = error-message)

Cause: An attempt to set the system common definition file for the database failed.
Action: Eliminate the cause of the error as indicated by the detailed information and the message that was output together with this message.

KDCZ58008-E

Failed to set the initialization file of the database. (Details: message = detailed-error-information-about-the-failure-of-copying-the-initialization-file-of-the-database)

Cause: An attempt to set the initialization file for the database failed.
Action: Eliminate the cause of the error as indicated by the detailed information and the message that was output together with this message.

KDCZ58009-E

Failed to set the execution environment definition file of the database. (Details: message = detailed-error-information-about-the-failure-of-setting-the-execution-environment-definition-file-of-the-database)

Cause: An attempt to set the execution environment definition file for the database failed.
Action: Eliminate the cause of the error as indicated by the detailed information and the message that was output together with this message.

KDCZ58051-E

Failed to create a portal project.

Cause: An attempt to create a portal project failed.
Action: Contact your customer support center.

KDCZ58054-E

Failed to set up Portal Manager.

Cause: An attempt to set up Portal Manager failed.
Action: Contact your customer support center.

KDCZ58055-E

Failed to set the user property file for Portal Manager. (Details: message = error-message)

Cause: An attempt to set the user properties file for the Portal Manager failed.
Action: Eliminate the cause of the error based on the detailed information.

KDCZ58056-E

Failed to set the shortcut file for Portal Manager. (Details: message = error-message)

Cause: An attempt to set the shortcut file for the Portal Manager failed.
Action: Eliminate the cause of the error based on the detailed information.

KDCZ58057-E

Failed to set the security policy file for Portal Manager. (Details: message = error-message)

Cause: An attempt to set the security policy file for the Portal Manager failed.
Action: Eliminate the cause of the error as indicated by the detailed information and the message that was output together with this message.

KDCZ58084-E

Failed to import the resource adapter.

Cause: An attempt to import a resource adapter failed.
Action: Contact your customer support center.

KDCZ58085-E

Failed to deploy the resource adapter.

Cause: An attempt to deploy a resource adapter failed.
Action: Contact your customer support center.

KDCZ58086-E

Failed to set the connector attribute file for the resource adapter. (Details: message = error-message)

Cause: An attempt to set the connector attribute file for the resource adapter failed.
Action: Eliminate the cause of the error based on the detailed information.

KDCZ58087-E

Failed to set the properties for the resource adapter.

Cause: An attempt to set the properties of the resource adapter failed.
Action: Contact your customer support center.

KDCZ58203-E

Failed to delete the J2EE server. (Details: message = error-message)

Cause: An attempt to delete the J2EE server failed.
Action: Eliminate the cause of the error as indicated by the detailed information and the message that was output together with this message.

KDCZ58210-E

Failed to delete the portal project. (Details: message = error-message)

Cause: An attempt to delete a portal project failed.
Action: Eliminate the cause of the error as indicated by the detailed information and the message that was output together with this message.

KDCZ58411-E

Failed to start the resource adapter.

Cause: A resource adapter failed to start.
Action: Contact your customer support center.

KDCZ58803-E

An error occurred in the framework processing. (error = information-about-the-error-occurred-in-the-framework-processing)

Cause: An error occurred in framework processing.
Action: Contact your customer support center.

KDCZ58804-E

message-of-the-error-occurred-during-command-execution

Cause

An error occurred during command execution.

Action

Eliminate the cause of the error based on the message displayed together with this message.

If the problem persists, contact your customer support center.

KDCZ58893-E

Failed to copy the file. (Details: message = error-message)

Cause: An attempt to copy a file failed.
Action: Eliminate the cause of the failure based on the detailed information.

KDCZ58896-E

Failed to copy the directory. (Details: message = error-message)

Cause: An attempt to copy a directory failed.
Action: Eliminate the cause of the failure based on the detailed information.

KDCZ58897-E

Failed to delete the directory. (Details: message = error-message)

Cause: An attempt to delete a directory failed.
Action: Eliminate the cause of the failure based on the detailed information.

KDCZ58959-E

Failed to output the setup results file.

Cause

Failed to output the setup results file.

Action

Confirm that write permissions have been granted for the setup results file and the storage folder, and then follow the unsetup process before attempting to execute the command again.

Path of setup results file

Navigation-Platform-installation-directory\setup\conf\ucnp_setup_result.bat

If the problem persists, contact your customer support center.

KDCZ59801-E

An error occurred while checking the execution privileges.

Cause: An error occurred while checking execution permissions.
Action: Contact your customer support center.

KDCZ59806-E

Failed to read the setup results file. (Details: file path = path-of-the-setup-results-file)

Cause

An attempt to read the setup results file failed.

Action

Confirm that you are able to access the file path displayed in the detailed information.

If the problem persists, contact your customer support center.

KDCZ59820-E

Failed to read the system setup message file.

Cause: An attempt to read the system setup messages file failed.
Action: Contact your customer support center.

KDCZ59821-E

Failed to read the system setup property file.

Cause: An attempt to read the system setup properties file failed.
Action: Contact your customer support center.

KDCZ59822-E

Failed to output the setup results file. Make sure that you have the write privileges for the displayed file path. (path of setup results file = absolute-path-of-the-setup-results-file)

Cause

An attempt to output the setup results file failed.

Action

Confirm that you have write permissions to the path displayed in the message, and then re-execute the command.

If the problem persists, contact your customer support center.

KDCZ59823-E

Failed to delete the Navigation Platform status file. (path of Navigation Platform status file = absolute-path-of-the-Navigation-Platform-status-file)

Cause: An attempt to delete the Navigation Platform status file failed.
Action: Delete the file whose path is displayed in the message.

KDCZ59824-E

An unexpected error occurred. (error = error-information)

Cause: An unexpected error has occurred.
Action: Contact your customer support center.

KDCZ59825-E

Failed to obtain the host name.

Cause: An attempt to acquire the host name failed.
Action: Contact your customer support center.