2.5.24 Get JP1 user mapping definition

Function

This service template collects JP1/Base's JP1 user and OS mapping information in the format of the user mapping definition file (jp1BsUmap.conf).

The following tasks are performed.

(1) The JP1 user and OS mapping information is output to the specified file in text format (the same format as the user mapping definition file (jp1BsUmap.conf)). The output format of the file is the same as the output result of JP1/Base's jbsgetumap command.

Prerequisites

For the latest support information about [Required product in the System]/[Prerequisite products in the system executing the service template]/[Prerequisite product OS running in the system executing the service template], see the release notes.

[Required product in the System]

JP1/Automatic Operation 12-00 or later

[Prerequisite products in the system executing the service template]

(1) JP1/Base is running.

Job Management Partner 1/Base 09-00 or later, or

JP1/Base 11-00 or later

[Prerequisite product OS running in the system executing the service template]

(1) Windows Server 2008 R2 Standard/Enterprise/Datacenter

(2) Windows Server 2012 Standard/Datacenter, Windows Server 2012 R2 Standard/Datacenter

(3) Windows Server 2016 Standard/Datacenter

(4) Windows Server 2019 Standard/Datacenter

(5) Red Hat Enterprise Linux Server 6 (32-bit x86), Red Hat Enterprise Linux Server 6 (64-bit x86_64)

(6) Red Hat Enterprise Linux Server 7 (64-bit x86_64)

(7) Red Hat Enterprise Linux Server 8 (64-bit x86_64)

(8) AIX V6

(9) AIX V7

[Usage conditions of prerequisite products in the system executing the service template]

(1) The authentication server has been configured.

(2) The usage conditions for JP1/Base's jbsgetumap command have been set.

Cautions

(1) If you are executing this service in a UNIX environment, do not use multibyte characters in properties.

(2) When the files names specified for remote and local already exist, the existing files are overwritten. The file on the remote side is also deleted. For this reason, exercise sufficient caution that file names are specified correctly.

(3) If there is no folder at the path specified as remote, the folder is created. The created folder is left undeleted. If it is not used periodically, delete it.

Version

02.00.00

Tags

Gather JP1 information,Base

Property list

The following shows the list of the property groups set in the property:

Property group	Description	Initial display
Monitored system environment information	Specify JP1/Base environment information.	Y
JP1 user mapping acquisition information	Specify the information you want to acquire about the JP1 user mapping.	Y

The following shows the list of the properties to be displayed in the "Service Definition" window:

(Legend)

R: The property must be specified.

O: The property can be omitted. However, the property might be mandatory depending on what is specified for other properties. See the Description of each property.

Property key	Property name	Description	I/O type	Shared	Required	Property group
jp1base.listJP1UserMappingOutputFileNameRemote	JP1 user mapping definition output file name (remote)	Specify the file name using the full path of the file on the JP1/Base to which JP1 user mapping definitions are to be output.	Input	Disabled	R	JP1 user mapping acquisition information

The following shows the list of the properties to be displayed on the "Service Definition" window and the "Submit Service" window:

Property key	Property name	Description	I/O type	Shared	Required	Property group
jp1base.jp1BaseHostName	JP1/Base host name	Specifies the host name or IP address of the server where JP1/Base is installed. IPv6 addresses are not supported. In the case of a cluster configuration, specify the logical host of the active server.	Input	Disabled	R	Monitored system environment information
jp1base.jp1BaseLHostName	Logical host name of JP1/Base	Specify the logical host name of JP1/Base on the agent server (if JP1/Base is used in a cluster configuration).	Input	Disabled	O	Monitored system environment information
jp1base.listJP1UserMappingOutputFileNameLocal	JP1 user mapping definition output file name (local)	Specify the file name using the full path of the file on the JP1/AO server from which JP1 user mapping definitions are to be obtained.	Input	Disabled	R	JP1 user mapping acquisition information

The following shows the restrictions on inputs to the properties displayed in the "Service Definition" window:

Property key	Characters that can be input
jp1base.listJP1UserMappingOutputFileNameRemote	This is a character string of up to 256 characters. < > | ; & * ? " % ` and trailing \ and / are not allowed.

The following shows the restrictions on inputs to the property displayed on the "Service Definition" window and the "Submit Service" window:

Property key	Characters that can be input
jp1base.jp1BaseHostName	A maximum of 255 characters can be entered. Characters that can be used include alphanumeric characters, as well as . and -.
jp1base.jp1BaseLHostName	A maximum of 255 characters can be entered. Characters that can be used include alphanumeric characters, as well as . and -.
jp1base.listJP1UserMappingOutputFileNameLocal	This is a character string of up to 256 characters. < > | ; & * ? " % and trailing \ and / are not allowed.

Flow specification details

The following table shows the detailed specification of the flow:

Hierarchy	Display name	Plug-in
		Plug-in name	Description	Error recovery method
1	listUserMappingJP1Base	Check mapping information	Acquires the mapping definition between JP1 users and OS users.	Eliminate the cause of the error, and then re-execute the service.
2	FileTransferPlugin	File-forwarding plug-in	Transfers the JP1 user mapping definition.	Eliminate the cause of the error, and then re-execute the service.
3	osDeleteFile	Delete file	Deletes temporary files.	Files remain in the target server. Delete them manually.

To Page Top