16.2 スマートデバイスマネージャー環境設定ファイル(manager.properties)
スマートデバイスマネージャーの動作環境を設定します。
記述形式
callhistory=通話履歴の保存期間 webhistory=Web閲覧履歴の保存期間 apphistory=アプリケーション使用履歴の保存期間 gpsevent=GPS電源OFFでのイベント発行有無 gpsmapview=GPS情報表示時、地図表示サイトとの連携有無 sdcardevent=SDカードの使用でのイベント発行有無 bluetoothevent=Bluetooth接続でのイベント発行有無 bluetoothalertlevel=Bluetooth接続でイベント発行する場合の警告レベル simevent=SIMカードの変更でのイベント発行有無 unlockevent=次回ロックの解除までのイベント発行有無、イベントを発行するまでの日数 unconectedevent=インベントリ収集未完了時のイベント発行期間 callhistory.securityinterval=通話履歴のセキュリティチェック間隔 webhistory.securityinterval=Web閲覧履歴のセキュリティチェック間隔 application.securityinterval=アプリケーションのセキュリティチェック間隔 bluetooth.securityinterval=Bluetooth履歴のセキュリティチェック間隔 baseinfo.securityinterval=基本情報のセキュリティチェック間隔 communicationserverurl=通信サーバのアドレス detail.debug.log.mode=トレースログの詳細ログ出力モード distribute.mode=アプリケーションの配布方式 distribute.auth=アクセス認証有無
記述項目
スマートデバイスマネージャー環境設定ファイルの記述項目と設定値を次に示します。
|
項目 |
説明 |
設定値 |
初期値 |
|---|---|---|---|
|
callhistory |
通話履歴の保存期間を設定します。 |
1〜365(単位:日) |
120 |
|
webhistory |
Web閲覧履歴の保存期間を設定します。 |
1〜365(単位:日) |
120 |
|
apphistory |
アプリケーション使用履歴の保存期間を設定します。 |
1〜365(単位:日) |
120 |
|
gpsevent |
GPS電源OFFでイベント発行するかどうかを設定します。 |
|
true |
|
gpsmapview |
GPS情報表示時、地図表示サイトと連携するかどうかを設定します。 |
|
true |
|
sdcardevent |
SDカードの使用でイベント発行するかどうかを設定します。 |
|
true |
|
bluetoothevent |
Bluetooth接続でイベント発行するかどうかを設定します。 |
|
true |
|
bluetoothalertlevel |
Bluetooth接続でイベント発行する場合の警告レベルを設定します。 |
|
0 |
|
simevent |
SIMカードの変更でイベント発行するかどうかを設定します。 |
|
true |
|
unlockevent |
次回ロックの解除までにイベントを発行するかどうか、またはイベントを発行する場合は、イベントを発行するまでの日数を設定します。 |
|
1 |
|
unconectedevent |
インベントリ収集未完了時のイベント発行期間を設定します。 |
1〜7(単位:日) |
1 |
|
callhistory.securityinterval |
通話履歴のセキュリティチェック間隔を設定します。 |
1〜86400(単位:分) |
1440 |
|
webhistory.securityinterval |
Web閲覧履歴のセキュリティチェック間隔を設定します。 |
1〜86400(単位:分) |
1440 |
|
application.securityinterval |
アプリケーションのセキュリティチェック間隔を設定します。 |
1〜86400(単位:分) |
1440 |
|
bluetooth.securityinterval |
Bluetooth履歴のセキュリティチェック間隔を設定します。 |
1〜86400(単位:分) |
1440 |
|
baseinfo.securityinterval |
基本情報のセキュリティチェック間隔を設定します。 |
1〜86400(単位:分) |
1440 |
|
communicationserverurl |
スマートデバイスマネージャーの接続先通信サーバのアドレスを設定します。 この項目は必須です。 |
ホスト名:ポート番号
|
なし |
|
detail.debug.log.mode |
トレースログの詳細ログ出力モードを設定します。 |
|
0 |
|
distribute.mode※2 |
アプリケーションの配布方式を設定します。 |
|
1 |
|
distribute.auth※2 |
標準配布の場合にアクセス認証をするかどうかを設定します。※3 |
|
1 |
- 注※1
-
通信サーバのhttpsd.confに指定したポート番号と同一である必要があります。
- 注※2
-
「0」または「1」以外の値が指定されている場合または項目がない場合、「0」が仮定されます。
- 注※3
-
アクセス認証をしない場合、JP1/ITDM2 - SDM(通信サーバ)のhttpsd.conf ファイルの次の行をコメントアウトし、通信サーバのサービス「JP1/ITDM2 - Smart Device Manager Web Server」を再起動してください。
|
<Directory "JP1/ITDM2 - SDM(通信サーバ)のインストール先フォルダ/cms/uC/httpsd/htdocs/download"> AuthType Basic AuthName "realm" AuthUserFile "JP1/ITDM2 - SDM(通信サーバ)のインストール先フォルダ/cms/conf/htpasswd" Require valid-user </Directory> |
記述例
callhistory=120 webhistory=120 apphistory=120 gpsevent=true gpsmapview=true sdcardevent=true bluetoothevent=true bluetoothalertlevel=1 simevent=true unlockevent=1 unconectedevent=1 callhistory.securityinterval=30 webhistory.securityinterval=30 application.securityinterval=30 bluetooth.securityinterval=30 baseinfo.securityinterval=30 communicationserverurl=xxxxxxx.xxxxxxx.co.jp:26055 detail.debug.log.mode=1 distribute.mode=1 distribute.auth=1