3.2.1 Notes for installation

Install this program as an OS user who has Administrators permission. You can't install this program as an OS user who has not permission to write in the registry key.

When you start the installer as an OS user who has not Administrators permission, a dialog box (UAC dialog) which requests to switch to a user with the Administrators permission may be displayed. If you enter the user name with Administrators permission and password, you will switch to the user and you can start the installer.

Operate JP1/DH - AJE (Job Execution) on the OS that JP1/DH - AJE (Job Execution) premises.

Don't specify following folders as the install destination folder of this program.

1. The root level of the drive (example: C:\)

2. The install destination folder of other product

3. The folder that includes multi byte character in the folder name.

Do not install the Japanese version JP1/DH - AJE (R-1523P-2AA4) and this product (R-1523P-2AAL) on the same host. When the either of them is already installed, install the other JP1/DH - AJE after uninstalling the JP1/DH - AJE.

When JP1/DH - AJE is installed for the first time, JP1/DH - AJE is set up to use the language according to the system locale of OS (Control Panel - [Language] - [Administrative] - [Language for non-Unicode programs]). If you change the language which is used by JP1/DH - AJE, refer to 3.3.3 How to change the language of JP1/DH - AJE.

JP1/DH - AJE may be uninstalled by perfection when carry out cancellation operation of the installation when revise before 10-50 JP1/DH - AJE in later 11-00. In this case after installing before 10-50 JP1/DH - AJE, and having performed environmental setting, please carry out version up to later 11-00.

Please do not install JP1/DH - AJE before 10-50 in the environment where version later 11-00 was installed in.

Job execution program is different from version before 10-50 in the installation folder of the default with version to 11-00 or later version.

before 10-50:

System drive\Program Files (x86)\Hitachi\JP1DH\AJE

11-00 or later:

System drive\Program Files\Hitachi\JP1DH\AJE

When Version up installation does Job execution program from version before 10-50 to version after 11-00, the installation folder is not changed.

Install this program as an OS user who has superuser permission.

When JP1/DH - AJE is installed for the first time, JP1/DH - AJE is set up to use "Japanese". If you change the language which is used by JP1/DH - AJE, refer to 3.3.3 How to change the language of JP1/DH - AJE.

Carry out installation after confirming that there is the space that is enough for a disk.

Do not install this program using the terminal service and the remote desktop service, because you might not be able to set up correctly after installation.

This program does not support remote installation.

After installation, the rebooting is unnecessary.

You can install the prerequisite programs and this program in any order. Therefore, you must complete the installation of the prerequisite program by the time of setting the environment setting and executing the program.

If installation is canceled during installation by any error, confirm information that message dialog displays and reinstall this program.

Installation of this program may be failed when you specify network drive, shared drive on network or removable disk as the install destination folder of this program. Specify fixed drive as the install destination folder.

When you carry out the overwrite installation of this program, the registered server certificate is deleted. Therefore, the re-registration of the server certificate is necessary. When you do not perform the re-registration of the server certificate, the DH custom job finishes an error. Refer to 3.6 Register server certificate, and carry out the re-registration of the server certificate by all means.

If config.xml exists and you overwrite install this program, config.xml does not be overwritten. If you want to initialize config.xml, you should copy config.xml.template to config.xml.

You can't overwrite install from newer version to older version. In this case, you have to remove this program that already installed and install older version.

Don't install JP1/DH - AJE (Job Definition) and JP1/DH - AJE (Job Execution) to the same install destination folder.

When you install this program to cluster system, you have to install the same version of this program to each physical host. In addition, don't install this program to shared-folder.

The installer of JP1/DH - AJE (Job Definition) is included in the installer of JP1/DH - AJE (Job Execution). If you want to install JP1/DH - AJE (Job Definition), you have to install JP1/DH - AJE (Job Execution) and get the installer of the compression form of JP1/DH - AJE (Job Definition) from the following folder.

On Windows Environment:

<Install destination folder of JP1/DH - AJE (Job Execution)>\Definition\jp1dhajed.exe

On Linux Environment:

/opt/jp1dh/aje/ajee/definition/jp1dhajed.exe

Executes the installer of the compression form and executes the installer (\DISK1\setup.exe).

At execution, the Installer automatically installs the Hitachi Network Objectplaza Trace Library (HNTRLib2). The installation folder is as follows:

On Windows x86 Environment:

System drive\Program Files\Hitachi\HNTRLib2\

On Windows x64 Environment:

System drive\Program Files\Hitachi\HNTRLib2\

or

System drive\Program Files (x86)\Hitachi\HNTRLib2\

On Linux Environment:

/opt/hitachi/HNTRLib2

This installation folder is fixed in the system drive. You cannot change the installation folder.

After you execute installer, it may take time to display install dialog or it may take time to until installation is started. Don't execute installer again if you already execute installer. If you do so, Install of this program may be failed.