1.1 General procedure for setting up JP1/DH - Server
The table below shows the tasks required to create an environment for using JP1/DH - Server to deliver data.
Perform the tasks according to the order of the numbers shown in the table below. For details about each task, see the applicable reference.
Order |
Task overview |
Task details |
Reference |
---|---|---|---|
1 |
Preparation before installation |
Check the environment in which JP1/DH - Server will be set up. |
1.2.1 |
2 |
Check required OSs. |
1.2.2 |
|
3 |
Installing JP1/DH - Server |
Install JP1/DH - Server. |
1.3 |
4 |
Setting up the environment for JP1/DH - Server |
Prepare the information required to set up the JP1/DH - Server environment. |
1.4.1 |
5 |
Use the file digikatsuwide.xml to set up the environment. |
1.4.2 |
|
6 |
Set Java heap memory sizes. |
1.4.3 |
|
7 |
Set the maximum number of web client connections and the number of concurrent processes. |
1.4.4 |
|
8 |
Apply the environment settings to JP1/DH - Server. |
1.4.5 |
|
9 |
Define the IP address and host name of JP1/DH - Server in the hosts file. |
1.4.6 |
|
10 |
Preparation for using SSL (HTTPS) communication |
Create a server certificate for the test environment. |
1.5.1 |
11 |
Create a server certificate for the production environment. |
1.5.2 |
|
12 |
Setting the network configuration |
Set the network configuration. |
1.6 |
13 |
Starting JP1/DH - Server |
Start JP1/DH - Server. |
1.7 |
14 |
Checking the created environment |
Verify that the environment settings of the machine on which JP1/DH - Server is installed are correct. |
1.8.1 |
15 |
Verify that the network settings are correct. |
1.8.2 |
|
16 |
Changing the password |
Change the password of the system administrator. |
1.9 |