Hitachi

JP1 Version 11 JP1/Automatic Job Management System 3 Administration Guide


A.2 JP1 event attributes

JP1 event attributes are classified as basic attributes and extended attributes. Basic attributes include the event ID, detailed information, and other attributes. Extended attributes include common information such as the severity level and user name, and event-specific information such as the operating system and the version of the AJS action performed.

Note that the detailed information for the basic attributes is truncated for compatibility with JP1 Version 5 and earlier products. Use the extended attributes when referencing the detailed information.

JP1 event attributes are summarized in the tables below.

Organization of this subsection

(1) Attributes of the scheduler service start event

The attributes of the scheduler service start event are as follows.

Table A‒2: Attributes of the scheduler service start event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004100

Message

N/A

KAVS0200-I

Scheduler service started. (scheduler-service-name)

Detailed information

N/A

VRID STTM CODIR ERDIR SCDIR SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

CODIR: Directory for unit definitions

ERDIR: Directory for job error information

SCDIR: Directory for schedule and monitoring information

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

  • In Windows: Account for the JP1/AJS3 service (default: SYSTEM)

  • In UNIX: root

If the JP1_USERNAME environment variable is set, its value is used.

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/AJS2 - Manager Scheduler service

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

JP1/AJS2 - Manager Scheduler service

Object ID

OBJECT_ID

Scheduler service name

Occurrence

OCCURRENCE

START

Start time

START_TIME

Start time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Legend:

N/A: Not applicable

(2) Attributes of the scheduler service end event

The attributes of the scheduler service end event are as follows.

Table A‒3: Attributes of the scheduler service end event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004101

Message

N/A

KAVS0201-I

Scheduler service ended. (scheduler-service-name)

Detailed information

N/A

VRID EDTM RTN EDTYP SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

EDTM: End time

RTN: Return code

EDTYP: Stop method

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

  • In Windows: Account for the JP1/AJS3 service (default: SYSTEM)

  • In UNIX: root

If the JP1_USERNAME environment variable is set, its value is used.

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/AJS2 - Manager Scheduler service

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

JP1/AJS2 - Manager Scheduler service

Object ID

OBJECT_ID

Scheduler service name

Occurrence

OCCURRENCE

END

Start time

START_TIME

Start time

End time

END_TIME

End time

Return code

RESULT_CODE

Return code

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Legend:

N/A: Not applicable

(3) Attributes of the jobnet start event

The attributes of the jobnet start event are as follows.

Table A‒4: Attributes of the jobnet start event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004102

Message

N/A

KAVS0260-I

Jobnet started. (name: jobnet-name : execution-ID)

Detailed information

N/A

VRID STTM PATH NAME RKIND LVL EUSR SCTM EHST SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

PATH: Upper-level unit name

NAME: Unit name

RKIND: Recovery type

LVL: Level

EUSR: Source user name

SCTM: Scheduled run-time#

EHST: Source host name

SRVID: Scheduler service name

#

Not set for a jobnet connector

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOBNET

Object name

OBJECT_NAME

Scheduler service name: /jobnet-or-jobnet-connector-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name

Occurrence

OCCURRENCE

START

Start time

START_TIME

Start time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet or jobnet connector name (set only for a nested jobnet or jobnet connector)

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Scheduled execution date & time

B5

Scheduled execution date & time (not set for a jobnet connector)

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter NETCOMMENTEVENT.

For details about the NETCOMMENTEVENT environment setting parameter, see 20.4.2(114) NETCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(4) Attributes of the jobnet normal end event

The attributes of the jobnet normal end event are as follows.

Table A‒5: Attributes of the jobnet normal end event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004103

Message

N/A

KAVS0261-I

Jobnet ended normally. (name: jobnet-name : execution-ID)

Detailed information

N/A

VRID STTM PATH NAME RKIND LVL EUSR EHST SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

PATH: Upper-level unit name

NAME: Unit name

RKIND: Recovery type

LVL: Level

EUSR: Source user name

EHST: Source host name

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOBNET

Object name

OBJECT_NAME

Scheduler service name: /jobnet-or-jobnet-connector-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-or-jobnet-connector-name

Occurrence

OCCURRENCE

END

Start time

START_TIME

Start time

End time

END_TIME

End time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet or jobnet connector name (set only for a nested jobnet or jobnet connector)

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter NETCOMMENTEVENT.

For details about the NETCOMMENTEVENT environment setting parameter, see 20.4.2(114) NETCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(5) Attributes of the jobnet abnormal end event

The attributes of the jobnet abnormal end event are as follows.

Table A‒6: Attributes of the jobnet abnormal end event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004104

Message

N/A

KAVS0262-E

Jobnet ended abnormally. (name: jobnet-name : execution-ID)

Detailed information

N/A

VRID STTM PATH NAME RKIND LVL EUSR EDTM EHST SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

PATH: Upper-level unit name

NAME: Unit name

RKIND: Recovery type

LVL: Level

EUSR: Source user name

EDTM: End time

EHST: Source host name

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOBNET

Object name

OBJECT_NAME

Scheduler service name: /jobnet-or-jobnet-connector-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-or-jobnet-connector-name

Occurrence

OCCURRENCE

END

Start time

START_TIME

Start time

End time

END_TIME

End time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet or jobnet connector name (set only for a nested jobnet or jobnet connector)

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Status

B4

a: Ended abnormally

q: Invalid exe. seq.

i: Interrupted

c: Killed

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter NETCOMMENTEVENT.

For details about the NETCOMMENTEVENT environment setting parameter, see 20.4.2(114) NETCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(6) Attributes of the job start event

The attributes of the job start event are as follows.

Table A‒7: Attributes of the job start event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004105

Message

N/A

KAVS0263-I

Job started. (name: job-name : execution-ID, host: host-name, JOBID: job-number)

Detailed information

N/A

VRID STTM PATH NAME RKIND DUSR EUSR EGRP EHST JTYP JHST SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

PATH: Upper-level unit name

NAME: Unit name

RKIND: Recovery type

DUSR: Run-time user name

EUSR: Source user name

EGRP: Job group name

EHST: Source host name

JTYP: Job execution status

JHST: Job run-time host

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name/job-name

Occurrence

OCCURRENCE

START

Start time

START_TIME

Start time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the user who registered the jobnet

B2

User who registered the jobnet

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Host name for execution destination

C0

Name of the host on which the job was executed

Execution group name

C1

Always blank

Job execution status

C6

Always r

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Queuing attribute

H4

Displays whether the queuing attribute exists:

q: Exists.

n: Does not exist.

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter JOBCOMMENTEVENT.

For details about the JOBCOMMENTEVENT environment setting parameter, see 20.4.2(115) JOBCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(7) Attributes of the job normal end event

The attributes of the job normal end event are as follows.

Table A‒8: Attributes of the job normal end event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004106

Message

N/A

KAVS0264-I

Job ended normally. (name: job-name, : execution-ID, host : host-name, code : code, JOBID : job-number)

Detailed information

N/A

VRID STTM PATH NAME RKIND DUSR EUSR EGRP EDTM RTN UCPUT SCPUT EHST JTYP JHST RQID ASTTM AEDTM AUCPU ASCPU SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

PATH: Upper-level unit name

NAME: Unit name

RKIND: Recovery type

DUSR: Run-time user name

EUSR: Source user name

EGRP: Job group name

EDTM: End time

RTN: Return code

UCPUT: User CPU time

SCPUT: System CPU time

EHST: Source host name

JTYP: Job execution status

JHST: Job run-time host

RQID: Request ID

ASTTM: Agent start time

AEDTM: Agent end time

AUCPU: Agent user CPU time

ASCPU: Agent system CPU time

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name/job-name

Occurrence

OCCURRENCE

END

Start time

START_TIME

Start time

End time

END_TIME

End time

Return code

RESULT_CODE

Return code

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#1

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the user who registered the jobnet

B2

User who registered the jobnet

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Host name for execution destination

C0

Name of the host on which the job was executed

Execution group name

C1

Always blank

Request ID

C2

Job number

Queue name

C3

Queue name (for a queuing job) or agent name (for a Unix job, PC job, flexible job, or HTTP connection job)

User CPU time

C4

Always 0 (zero)

System CPU time

C5

Always 0 (zero)

Job execution status

C6

Always r

Start time at the execution destination

E0#2, #3

Start time at the target host

End time at the execution destination

E1#3

End time at the target host

User CPU time at the execution destination

E2

Always 0 (zero)

System CPU time at the execution destination

E3

Always 0 (zero)

JP1 user who executed the job at the execution destination

E4#4, #5, #6

Name of the JP1 user who executed the job on the target host, as set in Executed by

Job execution time at the execution destination

E5#3, #7

How long the job took to execute at the target host (seconds)

Start time of retry execution

E6#8

Retry execution start time

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Queuing attribute

H4

Displays whether the queuing attribute exists:

q: Exists.

n: Does not exist.

Legend:

N/A: Not applicable

#1

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter JOBCOMMENTEVENT.

For details about the JOBCOMMENTEVENT environment setting parameter, see 20.4.2(115) JOBCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

#2

No value is set if the job failed to start and execution was not started on the target host.

#3

No value is set for a judgment job and OR job.

#4

Event jobs are always executed by the OS user who started JP1/AJS3, regardless of the JP1 user name set as the execution user.

#5

Set as the registered JP1 user for judgment jobs and OR jobs.

#6

No value is set if the target host could not acquire the information.

#7

No value is set when the target host start time or target host end time attribute is blank.

#8

Blank if no retry has been executed yet.

(8) Attributes of the job abnormal end event

The attributes of the job abnormal end event are as follows.

Table A‒9: Attributes of the job abnormal end event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004107

Message

N/A

KAVS0265-E

Job ended abnormally. (name: job-name, : execution-ID, status : status, code : code, JOBID : job-number)

Detailed information

N/A

VRID STTM PATH NAME RKIND DUSR EUSR EGRP EDTM RTN UCPUT SCPUT EDST EHST JTYP JHST RQID ASTTM AEDTM AUCPU ASCPU SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

PATH: Upper-level unit name

NAME: Unit name

RKIND: Recovery type

DUSR: Run-time user name

EUSR: Source user name

EGRP: Job group name

EDTM: End time

RTN: Return code

UCPUT: User CPU time

SCPUT: System CPU time

EDST: Termination status

EHST: Source host name

JTYP: Job execution status

JHST: Job run-time host

RQID: Request ID

ASTTM: Agent start time

AEDTM: Agent end time

AUCPU: Agent user CPU time

ASCPU: Agent system CPU time

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name/job-name

Occurrence

OCCURRENCE

END

Start time

START_TIME

Start time

End time

END_TIME

End time

Return code

RESULT_CODE

Return code

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#1

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the user who registered the jobnet

B2

User who registered the jobnet

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Status

B4

a: Ended abnormally

f: Failed to start

c: Killed

?: Unknown end status

Host name for execution destination

C0

Name of the host on which the job was executed

Execution group name

C1

Always blank

Request ID

C2

Job number

Queue name

C3

Queue name (for a queuing job) or agent name (for a Unix job, PC job, flexible job, or HTTP connection job)

User CPU time

C4

Always 0 (zero)

System CPU time

C5

Always 0 (zero)

Job execution status

C6

Always r

Start time at the execution destination

E0#2, #3

Start time at the target host

End time at the execution destination

E1#3

End time at the target host

User CPU time at the execution destination

E2

Always 0 (zero)

System CPU time at the execution destination

E3

Always 0 (zero)

JP1 user who executed the job at the execution destination

E4#4, #5, #6

Name of the JP1 user who executed the job on the target host, as set in Executed by

Job execution time at the execution destination

E5#3, #7

How long the job took to execute at the target host (seconds)

Start time of retry execution

E6#8

Retry execution start time

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Queuing attribute

H4

Displays whether the queuing attribute exists:

q: Exists.

n: Does not exist.

Legend:

N/A: Not applicable

#1

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter JOBCOMMENTEVENT.

For details about the JOBCOMMENTEVENT environment setting parameter, see 20.4.2(115) JOBCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

#2

No value is set if the job failed to start and execution was not started on the target host.

#3

No value is set for a judgment job and OR job.

#4

Event jobs are always executed by the OS user who started JP1/AJS3, regardless of the JP1 user name set as the execution user.

#5

Set as the registered JP1 user for judgment jobs and OR jobs.

#6

No value is set if the target host could not acquire the information.

#7

No value is set when the target host start time or target host end time attribute is blank.

#8

Blank if no retry has been executed yet.

(9) Attributes of the jobnet warning end event

The attributes of the jobnet warning end event are as follows.

Table A‒10: Attributes of the jobnet warning end event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004108

Message

N/A

KAVS0268-W

Jobnet ended with warning. (name: jobnet-name: execution-ID)

Detailed information

N/A

VRID STTM PATH NAME RKIND LVL EUSR EDTM EHST SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

PATH: Upper-level unit name

NAME: Unit name

RKIND: Recovery type

LVL: Level

EDTM: End time

EHST: Source host name

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Warning

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOBNET

Object name

OBJECT_NAME

Scheduler service name: /jobnet-or-jobnet-connector-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-or-jobnet-connector-name

Occurrence

OCCURRENCE

END

Start time

START_TIME

Start time

End time

END_TIME

End time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet or jobnet connector name (set only for a nested jobnet or jobnet connector)

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter NETCOMMENTEVENT.

For details about the NETCOMMENTEVENT environment setting parameter, see 20.4.2(114) NETCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(10) Attributes of the job warning end event

The attributes of the job warning end event are as follows.

Table A‒11: Attributes of the job warning end event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004109

Message

N/A

KAVS0269-W

Job ended with warning. (name: job-name: execution-ID, code: code, host: host-name)

Detailed information

N/A

VRID STTM PATH NAME RKIND DUSR EUSR EGRP EDTM RTN UCPUT SCPUT EHST JTYP JHST RQID ASTTM AEDTM AUCPU ASCPU SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

PATH: Upper-level unit name

NAME: Unit name

RKIND: Recovery type

DUSR: Run-time user name

EUSR: Source user name

EGRP: Job group name

EDTM: End time

RTN: Return code

UCPUT: User CPU time

SCPUT: System CPU time

EHST: Source host name

JTYP: Job execution status

JHST: Job run-time host

RQID: Request ID

ASTTM: Agent start time

AEDTM: Agent end time

AUCPU: Agent user CPU time

ASCPU: Agent system CPU time

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Warning

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

Scheduler service name: /jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name/job-name

Occurrence

OCCURRENCE

END

Start time

START_TIME

Start time

End time

END_TIME

End time

Return code

RESULT_CODE

Return code

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#1

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the user who registered the jobnet

B2

User who registered the jobnet

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Host name for execution destination

C0

Name of the host on which the job was executed

Execution group name

C1

Always blank

Request ID

C2

Job number

Queue name

C3

Queue name (for a queuing job) or agent name (for a Unix job, PC job, flexible job, or HTTP connection job)

User CPU time

C4

Always 0 (zero)

System CPU time

C5

Always 0 (zero)

Job execution status

C6

Always r

Start time at the execution destination

E0#2, #3

Start time at the target host

End time at the execution destination

E1#3

End time at the target host

User CPU time at the execution destination

E2

Always 0 (zero)

System CPU time at the execution destination

E3

Always 0 (zero)

JP1 user who executed the job at the execution destination

E4#4, #5, #6

Name of the JP1 user who executed the job on the target host, as set in Executed by

Job execution time at the execution destination

E5#3, #7

How long the job took to execute at the target host (seconds)

Start time of retry execution

E6#8

Retry execution start time

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Queuing attribute

H4

Displays whether the queuing attribute exists:

q: Exists.

n: Does not exist.

Legend:

N/A: Not applicable

#1

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter JOBCOMMENTEVENT.

For details about the JOBCOMMENTEVENT environment setting parameter, see 20.4.2(115) JOBCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

#2

No value is set if the job failed to start and execution was not started on the target host.

#3

No value is set for a judgment job and OR job.

#4

Event jobs are always executed by the OS user who started JP1/AJS3, regardless of the JP1 user name set as the execution user.

#5

Set as the registered JP1 user for judgment jobs and OR jobs.

#6

No value is set if the target host could not acquire the information.

#7

No value is set when the target host start time or target host end time attribute is blank.

#8

Blank if no retry has been executed yet.

(11) Attributes of the queued job canceled event

The attributes of the queued job canceled event are as follows.

Table A‒12: Attributes of the queued job canceled event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

0000410A

Message

N/A

KAVS0266-I

To submit Job again, it is canceled. (name: job-name: execution-ID, JOBID: job-number)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name/job-name

Occurrence

OCCURRENCE

END

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0900

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Job name

Execution ID

A3

Execution ID

Comment

A6#1

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the user who registered the jobnet

B2

User who registered the jobnet

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Host name for execution destination

C0

Always blank

Execution group name

C1

Always blank

Request ID

C2

Job number

Queue name

C3#2

Agent name

User CPU time

C4

Always 0 (zero)

System CPU time

C5

Always 0 (zero)

Job execution status

C6

Always r

Start time at the execution destination

E0

Always blank

End time at the execution destination

E1

Always blank

User CPU time at the execution destination

E2

Always 0 (zero)

System CPU time at the execution destination

E3

Always 0 (zero)

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Queuing attribute

H4

Displays whether the queuing attribute exists:

q: Exists.

n: Does not exist.

Legend:

N/A: Not applicable

#1

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter JOBCOMMENTEVENT.

For details about the JOBCOMMENTEVENT environment setting parameter, see 20.4.2(115) JOBCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

#2

If no job submission has been completed, this item is blank.

(12) Attributes of the log-daemon abnormal end event

The attributes of the log-daemon abnormal end event are as follows.

Table A‒13: Attributes of the log-daemon abnormal end event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004110

Message

N/A

KAVS0202-E

Log daemon ended abnormally. (code: code)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

  • In Windows: Account for the JP1/AJS3 service (default: SYSTEM)

  • In UNIX: root

If the JP1_USERNAME environment variable is set, its value is used.

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/AJS2 - Manager Scheduler service

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

JP1/AJS2 - Manager Scheduler service

Object ID

OBJECT_ID

N/A

Occurrence

OCCURRENCE

END

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Legend:

N/A: Not applicable

(13) Attributes of the scheduler log file swap event

The attributes of the scheduler log file swap event are as follows.

Table A‒14: Attributes of the scheduler log file swap event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004111

Message

N/A

KAVS0203-I

Log file (old-scheduler-log-file-name) has been changed to new-scheduler-log-file-name.

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

  • In Windows: Account for the JP1/AJS3 service (default: SYSTEM)

  • In UNIX: root

If the JP1_USERNAME environment variable is set, its value is used.

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/AJS2 - Manager Scheduler service

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

JP1/AJS2 - Manager Scheduler service

Object ID

OBJECT_ID

N/A

Occurrence

OCCURRENCE

EXCEPTION

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Name of log file before exchange

D0

Name of the old scheduler log file

Name of log file after exchange

D1

Name of the new scheduler log file

Legend:

N/A: Not applicable

(14) Attributes of the held jobnet event

The attributes of the held jobnet event are as follows.

Table A‒15: Attributes of the held jobnet event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004120

Message

N/A

KAVS0270-I

Jobnet cannot be executed while being held. (name: jobnet-name: execution-ID)

Detailed information

N/A

VRID STTM PATH NAME RKIND LVL EUSR EHST SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

PATH: Upper-level unit name

NAME: Unit name

RKIND: Recovery type

LVL: Level

EUSR: Source user name

EHST: Source host name

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Notice

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOBNET

Object name

OBJECT_NAME

Scheduler service name: /jobnet-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name

Occurrence

OCCURRENCE

PAUSE

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Scheduled execution date & time

B5

Scheduled execution date & time

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter NETCOMMENTEVENT.

For details about the NETCOMMENTEVENT environment setting parameter, see 20.4.2(114) NETCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(15) Attributes of the held job event

The attributes of the held job event are as follows.

Table A‒16: Attributes of the held job event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004121

Message

N/A

KAVS0271-I

Job cannot be executed while being held. (name: job-name: execution-ID)

Detailed information

N/A

VRID STTM PATH NAME RKIND DUSR EUSR EGRP JHST SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

PATH: Upper-level unit name

NAME: Unit name

RKIND: Recovery type

DUSR: Run-time user name

EUSR: Source user name

EGRP: Job group name

JHST: Job run-time host

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Notice

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

Scheduler service name: /jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name/job-name

Occurrence

OCCURRENCE

PAUSE

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the user who registered the jobnet

B2

User who registered the jobnet

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Execution group name

C1

Always blank

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Queuing attribute

H4

Displays whether the queuing attribute exists:

q: Exists.

n: Does not exist.

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter JOBCOMMENTEVENT.

For details about the JOBCOMMENTEVENT environment setting parameter, see 20.4.2(115) JOBCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(16) Attributes of the jobnet delayed start event

The attributes of the jobnet delayed start event are as follows.

Table A‒17: Attributes of the jobnet delayed start event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004122

Message

N/A

KAVS0275-I

Start of a jobnet delayed. (name: jobnet-name: execution-ID)

Detailed information

N/A

VRID STTM STRTM JNST PATH NAME RKIND LVL EUSR EHST SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

STRTM: Start delayed

JNST: Jobnet status

PATH: Upper-level unit name

NAME: Unit name

RKIND: Recovery type

LVL: Level

EUSR: Source user name

EHST: Source host name

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Warning

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOBNET

Object name

OBJECT_NAME

Scheduler service name: /jobnet-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name

Occurrence

OCCURRENCE

LATESTART

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Status

B4

term-wait: Waiting for prev. to end

time-wait: Waiting for start time

holding: Being held

shutdown: Shutdown

Scheduled execution date & time

B5

Scheduled execution date & time

Start-delayed time

B6

Time when start delayed

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter NETCOMMENTEVENT.

For details about the NETCOMMENTEVENT environment setting parameter, see 20.4.2(114) NETCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(17) Attributes of the termination delay event

The attributes of the termination delay event are as follows.

Table A‒18: Attributes of the termination delay event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004123

Message

N/A

KAVS0276-I

End of a jobnet delayed. (name: jobnet-name: execution-ID)

Detailed information

N/A

VRID STTMR STTM SEDTM JNST PATH NAME RKIND LVL EUSR EHST SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTMR: Scheduled start time

STTM: Actual start time

SEDTM: Termination delay

JNST: Jobnet status

PATH: Upper-level unit name

NAME: Unit name

RKIND: Recovery type

LVL: Level

EUSR: Source user name

EHST: Source host name

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Warning

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOBNET

Object name

OBJECT_NAME

Scheduler service name: /jobnet-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name

Occurrence

OCCURRENCE

LATEEND

Start time

START_TIME

Start time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Status

B4

term-wait: Waiting for prev. to end

time-wait: Waiting for start time

holding: Being held

running: Now running

AB-cont: Running + Abend

WA-cont: Running + Warning

shutdown: Shutdown

Scheduled execution date & time

B5

Scheduled execution date & time

End-delayed time

B7

Time when the termination delay was detected

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter NETCOMMENTEVENT.

For details about the NETCOMMENTEVENT environment setting parameter, see 20.4.2(114) NETCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(18) Attributes of the next scheduled queued event

The attributes of the next scheduled queued event are as follows.

Table A‒19: Attributes of the next scheduled queued event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004124

Message

N/A

KAVS0277-I

Start time for next execution schedule has been reached. (name: jobnet-name: execution-ID)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Notice

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOBNET

Object name

OBJECT_NAME

Scheduler service name: /jobnet-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name

Occurrence

OCCURRENCE

EXCEPTION

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Scheduled execution date & time

B5

Scheduled execution date & time

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter NETCOMMENTEVENT.

For details about the NETCOMMENTEVENT environment setting parameter, see 20.4.2(114) NETCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(19) Attributes of the job submission start event

The attributes of the job submission start event are as follows.

Table A‒20: Attributes of the job submission start event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004125

Message

N/A

KAVS0278-I

Job submit started. (name: job-name: execution-ID)

Detailed information

N/A

VRID STTM PATH NAME RKIND DUSR EUSR EGRP EHST JTYP JHST SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

PATH: Upper-level unit name

NAME: Unit name

RKIND: Recovery type

DUSR: Run-time user name

EUSR: Source user name

EGRP: Job group name

EHST: Source host name

JTYP: Job execution status

JHST: Job run-time host

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

Scheduler service name: /jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name/job-name

Occurrence

OCCURRENCE

START

Start time

START_TIME

Start time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the user who registered the jobnet

B2

User who registered the jobnet

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Host name for execution destination

C0

Name of the host on which the job was executed (only if executed on a local or remote host)

Execution group name

C1

Always blank

Job execution status

C6

Always r

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Queuing attribute

H4

Displays whether the queuing attribute exists:

q: Exists.

n: Does not exist.

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter JOBCOMMENTEVENT.

For details about the JOBCOMMENTEVENT environment setting parameter, see 20.4.2(115) JOBCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(20) Attributes of the event job execution-request start event

The attributes of the event job execution-request start event are as follows.

Table A‒21: Attributes of the event job execution-request start event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004126

Message

N/A

KAVS0242-I

The execution request of the event job started. (name: job-name: execution-ID)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

Scheduler service name: /jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name/job-name

Occurrence

OCCURRENCE

START

Start time

START_TIME

Start time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0800

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the user who registered the jobnet

B2

User who registered the jobnet

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Host name for execution destination

C0

Name of the host on which the job was executed (only if executed on a local or remote host)

Execution group name

C1

Always blank

Job execution status

C6

Always r

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Queuing attribute

H4

Displays whether the queuing attribute exists:

q: Exists.

n: Does not exist.

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter JOBCOMMENTEVENT.

For details about the JOBCOMMENTEVENT environment setting parameter, see 20.4.2(115) JOBCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(21) Attributes of the job delayed end event

The attributes of the job delayed end event are as follows.

Table A‒22: Attributes of the job delayed end event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004127

Message

N/A

KAVS0248-I

End of a Job delayed. (name: job-name: execution-ID)

Detailed information

N/A

VRID STTM SEDTM JST PATH NAME RKIND LVL EUSR EHST SRVID

The meaning of each symbol is as follows

VRID: Protocol version ID

STTM: Actual start time

SEDTM: Termination delay

JST: Job status

PATH: Upper-level unit name

NAME: Unit name

RKIND: Recovery type

LVL: Level

EUSR: Source user name

EHST: Source host name

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Warning

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

Scheduler service name: /jobnet-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name/job-name

Occurrence

OCCURRENCE

LATEEND

Start time

START_TIME

Start time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0850

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#1

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Status

B4

running: Now running

End-delayed time

B7

Time when the termination delay was detected

Host name for execution destination

C0

Name of the host on which the job was executed

Start time of retry execution

E6#2

Retry execution start time

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Legend:

N/A: Not applicable

#1

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter JOBCOMMENTEVENT.

For details about the JOBCOMMENTEVENT environment setting parameter, see 20.4.2(115) JOBCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

#2

Blank for an execution other than a retry execution.

(22) Attributes of the daemon restart event

The attributes of the daemon restart event are as follows.

Table A‒23: Attributes of the daemon restart event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004130

Message

N/A

KAVS0204-E

Scheduler service (scheduler-service-name) ended (name: process-name, code: return-code), but Scheduler service restart.

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

  • In Windows: Account for the JP1/AJS3 service (default: SYSTEM)

  • In UNIX: root

If the JP1_USERNAME environment variable is set, its value is used.

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/AJS2 - Manager Scheduler service

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

JP1/AJS2 - Manager Scheduler service

Object ID

OBJECT_ID

Scheduler service name

Occurrence

OCCURRENCE

START

Start time

START_TIME

Start time

Return code

RESULT_CODE

Return code

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Process name

D2

Name of stopped daemon

Legend:

N/A: Not applicable

(23) Attributes of the jobnet shutdown event

The attributes of the jobnet shutdown event are as follows.

Table A‒24: Attributes of the jobnet shutdown event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004131

Message

N/A

KAVS0272-E

Jobnet (jobnet-name: execution-ID) cannot be executed - error (maintenance-information) occurred.

KAVS0273-E

Jobnet (jobnet-name: execution-ID) cannot be scheduled - error (maintenance-information) occurred.

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOBNET

Object name

OBJECT_NAME

Scheduler service name: /jobnet-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name

Occurrence

OCCURRENCE

EXCEPTION

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Shutdown day & time

B8

Shutdown day & time

Maintenance information

B9

Maintenance information

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter NETCOMMENTEVENT.

For details about the NETCOMMENTEVENT environment setting parameter, see 20.4.2(114) NETCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(24) Attributes of the jobnet start-condition monitoring start event

The attributes of the jobnet start-condition monitoring start event are as follows.

Table A‒25: Attributes of the jobnet start-condition monitoring start event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004140

Message

N/A

KAVS0240-I

Monitoring of a jobnet's start conditions started. (name: jobnet-name: execution-ID)

Detailed information

N/A

VRID STTM PATH NAME RKIND LVL EUSR SCTM EHST SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

PATH: Upper-level unit name

NAME: Unit name

RKIND: Recovery type

LVL: Level

EUSR: Source user name

SCTM: Scheduled run-time

EHST: Source host name

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOBNET

Object name

OBJECT_NAME

Scheduler service name: /jobnet-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name

Occurrence

OCCURRENCE

START

Start time

START_TIME

Start time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0671

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Scheduled execution date & time

B5

Scheduled execution date & time

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter NETCOMMENTEVENT.

For details about the NETCOMMENTEVENT environment setting parameter, see 20.4.2(114) NETCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(25) Attributes of the jobnet start-condition monitoring end event

The attributes of the jobnet start-condition monitoring end event are as follows.

Table A‒26: Attributes of the jobnet start-condition monitoring end event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004141

Message

N/A

KAVS0241-I

Monitoring of a jobnet's start conditions ended. (name: jobnet-name: execution-ID, status: status)

Detailed information

N/A

VRID STTM PATH NAME RKIND LVL EUSR EDTM EHST SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

PATH: Upper-level unit name

NAME: Unit name

RKIND: Recovery type

LVL: Level

EUSR: Source user name

EDTM: End time

EHST: Source host name

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOBNET

Object name

OBJECT_NAME

Scheduler service name: /jobnet-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name

Occurrence

OCCURRENCE

END

Start time

START_TIME

Start time

End time

END_TIME

End time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0671

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Status

B4

u: Unmonitored + Ended

c: Monitor terminated

i: Interrupted monitoring

n: Monitor-end normal

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter NETCOMMENTEVENT.

For details about the NETCOMMENTEVENT environment setting parameter, see 20.4.2(114) NETCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(26) Attributes of the jobnet skipped event

The attributes of the jobnet skipped event are as follows.

Table A‒27: Attributes of the jobnet skipped event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004142

Message

N/A

KAVS0279-E

Jobnet ended with execution-deferred status. (name: jobnet-name: execution-ID)

Detailed information

N/A

VRID STTM PATH NAME RKIND LVL EUSR EDTM EHST SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

PATH: Upper-level unit name

NAME: Unit name

RKIND: Recovery type

LVL: Level

EUSR: Source user name

EDTM: End time

EHST: Source host name

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOBNET

Object name

OBJECT_NAME

Scheduler service name: /jobnet-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name

Occurrence

OCCURRENCE

END

Start time

START_TIME

Start time

End time

END_TIME

End time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0671

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter NETCOMMENTEVENT.

For details about the NETCOMMENTEVENT environment setting parameter, see 20.4.2(114) NETCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(27) Attributes of the connection-destination jobnet unregistered event

The attributes of the connection-destination jobnet unregistered event are as follows.

Table A‒28: Attributes of the connection-destination jobnet unregistered event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004143

Message

N/A

KAVS0243-E

Cannot terminate the jobnet(jobnet-connector-name: execution-ID) - jobnet for the connection destination is not registered.

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

User who submitted the job (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOBNET

Object name

OBJECT_NAME

Scheduler service name: /jobnet-connector-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-connector-name

Occurrence

OCCURRENCE

EXCEPTION

Start time

START_TIME

Start time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0810

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Jobnet connector name

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

Source host name

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

nc

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter NETCOMMENTEVENT.

For details about the NETCOMMENTEVENT environment setting parameter, see 20.4.2(114) NETCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(28) Attributes of the jobnet connector unregistered event

The attributes of the jobnet connector unregistered event are as follows.

Table A‒29: Attributes of the jobnet connector unregistered event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004144

Message

N/A

KAVS0244-E

Cannot start the jobnet for the connection destination(jobnet-name: execution-ID) - jobnet connector is not registered.

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOBNET

Object name

OBJECT_NAME

Scheduler service name: /jobnet-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name

Occurrence

OCCURRENCE

EXCEPTION

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0810

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Name of the host where the jobnet was registered

B3

Source host name

Scheduled execution date & time

B5

Scheduled execution date & time

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

n

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter NETCOMMENTEVENT.

For details about the NETCOMMENTEVENT environment setting parameter, see 20.4.2(114) NETCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(29) Attributes of the end of start-condition monitoring wait event

The attributes of the end of start-condition monitoring wait event are as follows.

Table A‒30: Attributes of the end of start-condition monitoring wait event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004145

Message

N/A

KAVS1420-I

A jobnet with a preset start condition (name:jobnet-name: execution-ID) will wait for the termination of its monitoring status generation(execution-ID-of-monitored-generation).

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Notice

User name

USER_NAME

User who submitted the job (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOBNET

Object name

OBJECT_NAME

Scheduler service name: /jobnet-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name

Occurrence

OCCURRENCE

EXCEPTION

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0900

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Execution ID of monitoring status generation

A5

Execution ID of the generation being monitored

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Scheduled execution date & time

B5

Scheduled execution date & time

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter NETCOMMENTEVENT.

For details about the NETCOMMENTEVENT environment setting parameter, see 20.4.2(114) NETCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(30) Attributes of the jobnet waiting-process start event

The attributes of the jobnet waiting-process start event are as follows.

Table A‒31: Attributes of the jobnet waiting-process start event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004146

Message

N/A

KAVS4950-I

The wait for the end of the preceding jobnet (name: full-unit-name: execution-ID) has begun.

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

User who submitted the job (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOBNET

Object name

OBJECT_NAME

Scheduler service name: /nested-jobnet-name-or-jobnet-connector-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /nested-jobnet-name-or-jobnet-connector-name

Occurrence

OCCURRENCE

START

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0950

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name or jobnet connector name (set only for a nested jobnet or jobnet connector)

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

Scheduled execution date & time

B5

Scheduled execution date & time (not set for a jobnet connector)

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter NETCOMMENTEVENT.

For details about the NETCOMMENTEVENT environment setting parameter, see 20.4.2(114) NETCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(31) Attributes of the jobnet waiting-process end event

The attributes of the jobnet waiting-process end event are as follows.

Table A‒32: Attributes of the jobnet waiting-process end event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004147

Message

N/A

KAVS4955-I

The wait conditions for the jobnet (name: full-unit-name:execution-ID) were approved. (approval factor: reason-code)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOBNET

Object name

OBJECT_NAME

Scheduler service name: /nested-jobnet-name-or-jobnet-connector-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /nested-jobnet-name-or-jobnet-connector-name

Occurrence

OCCURRENCE

END

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0950

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name or jobnet connector name (set only for a nested jobnet or jobnet connector)

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Approval factor

I0

Code number for the reason under which the wait condition was satisfied

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter NETCOMMENTEVENT.

For details about the NETCOMMENTEVENT environment setting parameter, see 20.4.2(114) NETCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(32) Attributes of the jobnet waiting-process retained event

The attributes of the jobnet waiting-process retained event are as follows.

Table A‒33: Attributes of the jobnet waiting-process retained event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004148

Message

N/A

KAVS4957-E

A jobnet (name: full-unit-name:execution-ID) cannot finish waiting because the unit whose end was to be waited for (name: full-unit-name:execution-ID) is in a state for which waiting is not possible. (cause number: reason-code)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOBNET

Object name

OBJECT_NAME

Scheduler service name: /nested-jobnet-name-or-jobnet-connector-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /nested-jobnet-name-or-jobnet-connector-name

Occurrence

OCCURRENCE

EXCEPTION

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0950

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet or jobnet connector name (set only for a nested jobnet or jobnet connector)

Execution ID

A3

Execution ID

Comment

A6#1

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

Scheduled execution date & time

B5

Scheduled execution date & time (not set for a jobnet connector)

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Unit whose end is to be waited for

I1

Name of the unit whose end is being waited for#2

Execution ID of the unit whose end was to be waited for

I2

Execution ID of the unit whose end is being waiting for#2, #3

Cause number

I3

Cause number

Legend:

N/A: Not applicable

#1

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter NETCOMMENTEVENT.

For details about the NETCOMMENTEVENT environment setting parameter, see 20.4.2(114) NETCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

#2

Set as *** when the value cannot be computed.

#3

If the specified unit whose end is being waited for uses a start condition, the execution ID of the monitoring generation is set.

(33) Attributes of the jobnet waiting-process resumed event

The attributes of the jobnet waiting-process resumed event are as follows.

Table A‒34: Attributes of the jobnet waiting-process resumed event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004149

Message

N/A

KAVS4958-I

The jobnet (name: full-unit-name:execution-ID) is now able to wait for the end of the unit (name: name-of-unit-whose-end-is-being-waited-for:execution-ID).

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Notice

User name

USER_NAME

User who submitted the job (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOBNET

Object name

OBJECT_NAME

Scheduler service name: /jobnet-name-or-jobnet-connector-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

Scheduler service name: /jobnet-name-or-jobnet-connector-name

Occurrence

OCCURRENCE

EXCEPTION

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0950

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#1

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

Scheduled execution date & time

B5

Scheduled execution date & time (not set for a jobnet connector)

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Unit whose end is to be waited for

I1

Name of the unit whose end is being waited for

Execution ID of the unit whose end was to be waited for

I2

Execution ID of the unit whose end is being waiting for#2

Legend:

N/A: Not applicable

#1

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter NETCOMMENTEVENT.

For details about the NETCOMMENTEVENT environment setting parameter, see 20.4.2(114) NETCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

#2

If the specified unit whose end is being waited for uses a start condition, the execution ID of the monitoring generation is set.

(34) Attributes of the job waiting-process start event

The attributes of the job waiting-process start event are as follows.

Table A‒35: Attributes of the job waiting-process start event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

0000414A

Message

N/A

KAVS4951-I

The wait for the end of the preceding job (name: full-unit-name:execution-ID) has begun.

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

scheduler-service-name:/jobnet-name/job-name

Occurrence

OCCURRENCE

START

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0950

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter JOBCOMMENTEVENT.

For details about the JOBCOMMENTEVENT environment setting parameter, see 20.4.2(115) JOBCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(35) Attributes of the job waiting-process end event

The attributes of the job waiting-process end event are as follows.

Table A‒36: Attributes of the job waiting-process end event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

0000414B

Message

N/A

KAVS4956-I

The wait conditions for the job (name: full-unit-name:execution-ID) were approved. (approval factor: reason-code)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

scheduler-service-name:/jobnet-name/job-name

Occurrence

OCCURRENCE

END

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0950

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Approval factor

I0

Code number for the reason under which the wait condition was satisfied

Legend:

N/A: Not applicable

#

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter JOBCOMMENTEVENT.

For details about the JOBCOMMENTEVENT environment setting parameter, see 20.4.2(115) JOBCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(36) Attributes of the job waiting-process retained event

The attributes of the job waiting-process retained event are as follows.

Table A‒37: Attributes of the job waiting-process retained event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

0000414C

Message

N/A

KAVS4971-E

A job (name: full-unit-name:execution-ID) cannot finish waiting because the unit whose end is to be waited for (name: full-unit-name:execution-ID) is in a state for which waiting is not possible. (cause number: reason-code)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

scheduler-service-name:/jobnet-name/job-name

Occurrence

OCCURRENCE

EXCEPTION

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0950

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#1

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Unit whose end is to be waited for

I1

Name of the unit whose end is being waited for#2

Execution ID of the unit whose end was to be waited for

I2

Execution ID of the unit whose end is being waiting for#2, #3

Cause number

I3

Cause number

Legend:

N/A: Not applicable

#1

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter JOBCOMMENTEVENT.

For details about the JOBCOMMENTEVENT environment setting parameter, see 20.4.2(115) JOBCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

#2

Set as *** when the value cannot be computed.

#3

If the specified unit whose end is being waited for uses a start condition, the execution ID of the monitoring generation is set.

(37) Attributes of the job waiting-process resumed event

The attributes of the job waiting-process resumed event are as follows.

Table A‒38: Attributes of the job waiting-process resumed event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

0000414D

Message

N/A

KAVS4973-I

A job (name: full-unit-name:execution-ID) is now able to wait for the end of a unit (name: name-of-unit-whose-end-is-being-waited-for:execution-ID).

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Notice

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

scheduler-service-name:/jobnet-name/job-name

Occurrence

OCCURRENCE

EXCEPTION

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0950

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#1

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Unit whose end is to be waited for

I1

Name of the unit whose end is being waited for

Execution ID of the unit whose end was to be waited for

I2

Execution ID of the unit whose end is being waiting for#2

Legend:

N/A: Not applicable

#1

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter JOBCOMMENTEVENT.

For details about the JOBCOMMENTEVENT environment setting parameter, see 20.4.2(115) JOBCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

#2

If the specified unit whose end is being waited for uses a start condition, the execution ID of the monitoring generation is set.

(38) Attributes of the waiting process blocked event

The attributes of the waiting process blocked event are as follows.

Table A‒39: Attributes of the waiting process blocked event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

0000414E

Message

N/A

KAVS4962-E

Waiting related to a unit (name: full-unit-name:execution-ID) was blocked because an error occurred. (cause number: reason-code) : maintenance-information-1 maintenance-information-2 maintenance-information-3 maintenance-information-4

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

  • In Windows: Account for the JP1/AJS3 service (default: SYSTEM)

  • In UNIX: root

If the JP1_USERNAME environment variable is set, its value is used.

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

Scheduler service name: /unit-name-in-message

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

SERVICE

Object ID

OBJECT_ID

Scheduler service name: /unit-name-in-message

Occurrence

OCCURRENCE

EXCEPTION

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0950

Cause number

I3

Cause number

Legend:

N/A: Not applicable

(39) Attributes of the start event for scheduler database reorganization

The attributes of the start event for scheduler database reorganization are as follows.

Table A‒40: Attributes of the start event for scheduler database reorganization

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004150

Message

N/A

KAVS1500-I

Database condensing of the scheduler service (service-name) started. start-time.

Detailed information

N/A

VRID STTM CODIR SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

CODIR: Directory for unit definitions

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

root

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/AJS2 - Manager ISAM Condense

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

SERVICE

Object ID

OBJECT_ID

JP1/AJS2 - Manager ISAM Condense

Occurrence

OCCURRENCE

START

Start time

START_TIME

Start time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0671

Legend:

N/A: Not applicable

(40) Attributes of the normal end event for scheduler database reorganization

The attributes of the normal end event for scheduler database reorganization are as follows.

Table A‒41: Attributes of the normal end event for scheduler database reorganization

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004151

Message

N/A

KAVS1501-I

Database condensing of the scheduler service (service-name) ended normally. start-time - end-time (required-time)

Detailed information

N/A

VRID STTM EDTM CODIR SRVID RTN

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

EDTM: End time

CODIR: Directory for unit definitions

SRVID: Scheduler service name

RTN: Return code

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

root

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/AJS2 - Manager ISAM Condense

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

SERVICE

Object ID

OBJECT_ID

JP1/AJS2 - Manager ISAM Condense

Occurrence

OCCURRENCE

END

Start time

START_TIME

Start time

End time

END_TIME

End time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0671

Time required

F0

Required time (seconds)

Legend:

N/A: Not applicable

(41) Attributes of the abnormal end event for scheduler database reorganization

The attributes of the abnormal end event for scheduler database reorganization are as follows.

Table A‒42: Attributes of the abnormal end event for scheduler database reorganization

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004152

Message

N/A

KAVS1502-E

Database condensing of the scheduler service (service-name) ended abnormally. start-time - end-time (required-time)

Detailed information

N/A

VRID EDTM CODIR SRVID RTN

The meaning of each symbol is as follows:

VRID: Protocol version ID

EDTM: End time

CODIR: Directory for unit definitions

SRVID: Scheduler service name

RTN: Return code

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

root

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/AJS2 - Manager ISAM Condense

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

SERVICE

Object ID

OBJECT_ID

JP1/AJS2 - Manager ISAM Condense

Occurrence

OCCURRENCE

END

Start time

START_TIME

Start time

End time

END_TIME

End time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0671

Legend:

N/A: Not applicable

(42) Attributes of the information event about the scheduler service's ISAM unused area size

The attributes of the information event about the scheduler service's ISAM unused area size are as follows.

Table A‒43: Attributes of the information event about the scheduler service's ISAM unused area size

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004153

Message

N/A

KAVS1503-I

The ISAM unused area size on scheduler service (service-name) is size MB.

Detailed information

N/A

VRID STTM CODIR SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

CODIR: Directory for unit definitions

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

root

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/AJS2 - Manager ISAM Condense

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

SERVICE

Object ID

OBJECT_ID

JP1/AJS2 - Manager ISAM Condense

Occurrence

OCCURRENCE

END

Start time

START_TIME

Start time

End time

END_TIME

End time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0671

ISAM unused area size

F1

ISAM unused area size (MB)

Legend:

N/A: Not applicable

(43) Attributes of the threshold warning event about the scheduler service's ISAM unused area size

The attributes of the threshold warning event about the scheduler service's ISAM unused area size are as follows.

Table A‒44: Attributes of the threshold warning event about the scheduler service's ISAM unused area size

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004154

Message

N/A

KAVU1504-W

The ISAM unused area size of the scheduler service (service-name) is size MB, which exceeds the size MB threshold value.

Detailed information

N/A

VRID STTM CODIR SRVID

The meaning of each symbol is as follows:

VRID: Protocol version ID

STTM: Start time

CODIR: Directory for unit definitions

SRVID: Scheduler service name

Extended

Common information

Severity

SEVERITY

Warning

User name

USER_NAME

root

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/AJS2 - Manager ISAM Condense

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

SERVICE

Object ID

OBJECT_ID

JP1/AJS2 - Manager ISAM Condense

Occurrence

OCCURRENCE

END

Start time

START_TIME

Start time

End time

END_TIME

End time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0671

ISAM unused area size

F1

ISAM unused area size (MB)

ISAM unused area size threshold value

F2

ISAM unused area size threshold value (MB)

Legend:

N/A: Not applicable

(44) Attributes of the wait start event for the automatic retry interval

The attributes of the wait start event for the automatic retry interval are as follows.

Table A‒45: Attributes of the wait start event for the automatic retry interval

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004155

Message

N/A

KAVS4675-I

A retry wait interval will now begin because the job ended abnormally. (name: job-name: execution-ID, code: code, host: host-name, JOBID: job-number, retry:number-of-retry-executions)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

scheduler-service-name:/jobnet-name/job-name

Occurrence

OCCURRENCE

START

Start time

START_TIME#1

Start time

Return code

RESULT_CODE

Return code

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

1000

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#2

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the user who registered the jobnet

B2

User who registered the jobnet

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Host name for execution destination

C0

Name of the host on which the job was executed

Execution group name

C1

Always blank

Request ID

C2

Job number

Queue name

C3

Queue name (for a queuing job) or agent name (for a Unix job, PC job, flexible job, or HTTP connection job)

User CPU time

C4

Always 0 (zero)

System CPU time

C5

Always 0 (zero)

Job execution status

C6

Always r

Start time at the execution destination

E0#3, #4

Start time at the target host

End time at the execution destination

E1#4

End time at the target host

User CPU time at the execution destination

E2

Always 0 (zero)

System CPU time at the execution destination

E3

Always 0 (zero)

JP1 user who executed the job at the execution destination

E4#5, #6, #7

Name of the JP1 user who executed the job on the target host, as set in Executed by

Job execution time at the execution destination

E5#4, #8

How long the job took to execute at the target host (seconds)

Start time of retry execution

E6#9

Retry execution start time

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Queuing attribute

H4

Displays whether the queuing attribute exists:

q: Exists.

n: Does not exist.

Legend:

N/A: Not applicable

#1

The time when the first job execution started is set.

#2

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter JOBCOMMENTEVENT.

For details about the JOBCOMMENTEVENT environment setting parameter, see 20.4.2(115) JOBCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

#3

No value is set if the job failed to start and execution was not started on the target host.

#4

No value is set for a judgment job and OR job.

#5

Event jobs are always executed by the OS user who started JP1/AJS3, regardless of the JP1 user name set as the execution user.

#6

Set as the registered JP1 user for judgment jobs and OR jobs.

#7

No value is set if the target host could not acquire the information.

#8

No value is set when the target host start time or target host end time attribute is blank.

#9

Blank if no retry has been executed yet.

(45) Attributes of the start event for automatic retry execution

The attributes of the start event for automatic retry execution are as follows.

Table A‒46: Attributes of the start event for automatic retry execution

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004156

Message

N/A

KAVS4676-I

Job started as retry execution. (name: job-name: execution-ID, host: host-name, JOBID: job-number, retry: number-of-retry-executions)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

scheduler-service-name:/jobnet-name/job-name

Occurrence

OCCURRENCE

START

Start time

START_TIME#1

Start time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

1000

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#2

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the user who registered the jobnet

B2

User who registered the jobnet

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Host name for execution destination

C0

Name of the host on which the job was executed

Execution group name

C1

Always blank

Job execution status

C6

Always r

Start time of retry execution

E6

Retry execution start time

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Queuing attribute

H4

Displays whether the queuing attribute exists:

q: Exists.

n: Does not exist.

Legend:

N/A: Not applicable

#1

The time when the first job execution started is set.

#2

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter JOBCOMMENTEVENT.

For details about the JOBCOMMENTEVENT environment setting parameter, see 20.4.2(115) JOBCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(46) Attributes of the error event that disables automatic retry execution

The attributes of the error event that disables automatic retry execution are as follows.

Table A‒47: Attributes of the error event that disables automatic retry execution

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004157

Message

N/A

KAVS4677-E

An error that cannot be recoverd by retry execution occurred.(name: job-name: execution-ID, code: end-code, host: host-name, JOBID: job-number, retry: number-of-retry-executions, cause code: cause-code)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

scheduler-service-name:/jobnet-name/job-name

Occurrence

OCCURRENCE

EXCEPTION

Start time

START_TIME#1

Start time

End time

END_TIME

End time

Return code

RESULT_CODE

Return code

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

1000

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#2

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the user who registered the jobnet

B2

User who registered the jobnet

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Host name for execution destination

C0

Name of the host on which the job was executed

Request ID

C2

Job number

Queue name

C3

Queue name (for a queuing job) or agent name (for a Unix job, PC job, flexible job, or HTTP connection job)

Start time at the execution destination

E0#3, #4

Start time at the target host

End time at the execution destination

E1#4

End time at the target host

JP1 user who executed the job at the execution destination

E4#5, #6, #7

Name of the JP1 user who executed the job on the target host, as set in Executed by

Job execution time at the execution destination

E5#4, #8

How long the job took to execute at the target host (seconds)

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Queuing attribute

H4

Displays whether the queuing attribute exists:

q: Exists.

n: Does not exist.

Legend:

N/A: Not applicable

#1

The time when the first job execution started is set.

#2

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter JOBCOMMENTEVENT.

For details about the JOBCOMMENTEVENT environment setting parameter, see 20.4.2(115) JOBCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

#3

No value is set if the job failed to start and execution was not started on the target host.

#4

No value is set for a judgment job and OR job.

#5

Event jobs are always executed by the OS user who started JP1/AJS3, regardless of the JP1 user name set as the execution user.

#6

Set as the registered JP1 user for judgment jobs and OR jobs.

#7

No value is set if the target host could not acquire the information.

#8

No value is set when the target host start time or target host end time attribute is blank.

(47) Attributes of the start event for submitting jobs for automatic retry

The attributes of the start event for submitting jobs for automatic retry are as follows.

Table A‒48: Attributes of the start event for submitting jobs for automatic retry

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004158

Message

N/A

KAVS4678-I

Job submit started as retry execution. (name: job-name: execution-ID, Retry: number-of-retry-executions)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

Scheduler service name: /root-jobnet-name

Object ID

OBJECT_ID

scheduler-service-name:/jobnet-name/job-name

Occurrence

OCCURRENCE

START

Start time

START_TIME#1

Start time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

1000

Job group name

A0

Scheduler service name: /job-group-name

Root jobnet name

A1

Root jobnet name

Nested jobnet or job name

A2

Nested jobnet name (set only for a nested jobnet)

Execution ID

A3

Execution ID

Comment

A6#2

Comment on the unit (No value is set if no comment on the unit can be obtained from the scheduler database.)

Recovery type

B0

n: Normal

r: Recovery

Jobnet levels

B1

Number of levels (where the root jobnet is level 0)

Name of the user who registered the jobnet

B2

User who registered the jobnet

Name of the host where the jobnet was registered

B3

When JP1/AJS3 - View or JP1/AJS3 - Web Console is used to register execution:

Name of the JP1/AJS3 - Manager host to be connected

When the ajsentry command is used to register execution:

Name of the host on which the command is executed

When a remote jobnet is executed on this host:

Name of the host on which the remote jobnet is defined

Host name for execution destination

C0

Name of the host on which the job was executed (only if executed on a local or remote host)

Execution group name

C1

Always blank

Job execution status

C6

Always r

Submit time of retry execution

E7

Retry execution start time

Unit ID

H2

Unit ID (decimal number)

Unit type

H3

Unit type (string specified as a parameter in the unit definition file)

Queuing attribute

H4

Displays whether the queuing attribute exists:

q: Exists.

n: Does not exist.

Legend:

N/A: Not applicable

#1

The time when the first job execution started is set.

#2

This attribute is output only when the output value of the comment on the unit is specified in the environment setting parameter JOBCOMMENTEVENT.

For details about the JOBCOMMENTEVENT environment setting parameter, see 20.4.2(115) JOBCOMMENTEVENT in the JP1/Automatic Job Management System 3 Configuration Guide.

(48) Attributes of the start event for reorganizing the database for the job execution environment

The attributes of the start event for reorganizing the database for the job execution environment are as follows.

Table A‒49: Attributes of the start event for reorganizing the database for the job execution environment

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004160

Message

N/A

KAVU5980-I

Database condensing of the job execution environment started. start-time

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

root

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/AJS2 - Manager ISAM Condense

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

SERVICE

Object ID

OBJECT_ID

JP1/AJS2 - Manager ISAM Condense

Occurrence

OCCURRENCE

START

Start time

START_TIME

Start time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0671

Legend:

N/A: Not applicable

(49) Attributes of the normal end event for reorganizing the database for the job execution environment

The attributes of the normal end event for reorganizing the database for the job execution environment are as follows.

Table A‒50: Attributes of the normal end event for reorganizing the database for the job execution environment

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004161

Message

N/A

KAVU5981-I

Database condensing of the job execution environment ended normally. start-time - end-time (required-time)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

root

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/AJS2 - Manager ISAM Condense

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

SERVICE

Object ID

OBJECT_ID

JP1/AJS2 - Manager ISAM Condense

Occurrence

OCCURRENCE

END

Start time

START_TIME

Start time

End time

END_TIME

End time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0671

Time required

F0

Required time (seconds)

Legend:

N/A: Not applicable

(50) Attributes of the abnormal end event for reorganizing the database for the job execution environment

The attributes of the abnormal end event for reorganizing the database for the job execution environment are as follows.

Table A‒51: Attributes of the abnormal end event for reorganizing the database for the job execution environment

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004162

Message

N/A

KAVU5982-E

Database condensing of the job execution environment ended abnormally. start-time - end-time (required-time)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

root

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/AJS2 - Manager ISAM Condense

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

SERVICE

Object ID

OBJECT_ID

JP1/AJS2 - Manager ISAM Condense

Occurrence

OCCURRENCE

END

Start time

START_TIME

Start time

End time

END_TIME

End time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0671

Legend:

N/A: Not applicable

(51) Attributes of the information event about ISAM unused area size for the job execution environment

The attributes of the information event about ISAM unused area size for the job execution environment are as follows.

Table A‒52: Attributes of the information event about ISAM unused area size for the job execution environment

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004163

Message

N/A

KAVU5983-I

The ISAM unused area size on job execution environment is size MB.

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

root

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/AJS2 - Manager ISAM Condense

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

SERVICE

Object ID

OBJECT_ID

JP1/AJS2 - Manager ISAM Condense

Occurrence

OCCURRENCE

END

Start time

START_TIME

Start time

End time

END_TIME

End time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0671

ISAM unused area size

F1

ISAM unused area size (MB)

Legend:

N/A: Not applicable

(52) Attributes of the threshold warning event about ISAM unused area size for the job execution environment

The attributes of the threshold warning event about ISAM unused area size for the job execution environment are as follows.

Table A‒53: Attributes of the threshold warning event about ISAM unused area size for the job execution environment

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004164

Message

N/A

KAVU5984-W

The ISAM unused area size of the job execution environment is size MB, which exceeds the size MB threshold value.

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Warning

User name

USER_NAME

root

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/AJS2 - Manager ISAM Condense

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

SERVICE

Object ID

OBJECT_ID

JP1/AJS2 - Manager ISAM Condense

Occurrence

OCCURRENCE

END

Start time

START_TIME

Start time

End time

END_TIME

End time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0671

ISAM unused area size

F1

ISAM unused area size (MB)

ISAM unused area size threshold value

F2

ISAM unused area size threshold value (MB)

Legend:

N/A: Not applicable

(53) Attributes of the abnormal termination event for the RDB connection wait function of the scheduler service

The attributes of the abnormal termination event for the RDB connection wait function of the scheduler service are as follows.

Table A‒54: Attributes of the abnormal termination event for the RDB connection wait function of the scheduler service

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004170

Message

N/A

KAVS0998-E

The system will wait because the database could not be connected. (Scheduler service: scheduler-service-name, Waittime: maximum-wait-time, Host: host-name)

Detailed information

N/A

VRID or RTN

The meaning of each symbol is as follows:

VRID: Version ID

RTN: Return value

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

  • In Windows: Account for the JP1/AJS3 service (default: SYSTEM)

  • In UNIX: root

If the JP1_USERNAME environment variable is set, its value is used.

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/AJS2 - Manager RDB

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

JP1/AJS2 - Manager Schedule service

Object ID

OBJECT_ID

AJS service name

Occurrence

OCCURRENCE

END

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0711

Database type

G0

EmbedDB

Maximum wait time

G1

RDBCONNECTWAITTIME value

return code from RDB

G2

Return code from the RDB

Legend:

N/A: Not applicable

(54) Attributes of the start event for the RDB connection wait function of the scheduler service

The attributes of the start event for the RDB connection wait function of the scheduler service are as follows.

Table A‒55: Attributes of the start event for the RDB connection wait function of the scheduler service

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004171

Message

N/A

KAVS0999-W

The database could not be connected within the specified time. (Scheduler service: scheduler-service-name, Waittime: maximum-wait-time, Host: host-name)

Detailed information

N/A

VRID

The meaning of each symbol is as follows:

VRID: Version ID

Extended

Common information

Severity

SEVERITY

Warning

User name

USER_NAME

  • In Windows: Account for the JP1/AJS3 service (default: SYSTEM)

  • In UNIX: root

If the JP1_USERNAME environment variable is set, its value is used.

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/AJS2 - Manager RDB

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

JP1/AJS2 - Manager Schedule service

Object ID

OBJECT_ID

AJS service name

Occurrence

OCCURRENCE

START

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0711

Database type

G0

EmbedDB

Maximum wait time

G1

RDBCONNECTWAITTIME value

return code from RDB

G2

Return code from the RDB

Legend:

N/A: Not applicable

(55) Attributes of the command or JP1/AJS3 - View operation start event

The attributes of the command or JP1/AJS3 - View operation start event are as follows.

Table A‒56: Attributes of the command or JP1/AJS3 - View operation start event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004190

Message

N/A

KAVS0715-I

The command or JP1/AJS2 - View operation started. (Operation name: command-name)

command-name: Upper-case command name from which the prefix ajs is removed

For example, if the command name is ajsentry, ENTRY is set.

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

One of the following user names:

  • Name of the user who executed the command.

  • Name of the JP1 user who is using JP1/AJS3 - View.

  • Name of the JP1 user who called the API of JP1/AJS3 - Web Console

When the operation is performed by executing a command, the value of the JP1_USERNAME environment variable is set.

If the environment variable has not been set, the name of the OS user who executed the command is set.

If a JP1 user who has not been authorized attempted to perform the operation, a NULL string is set.

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

COMMAND

Object name

OBJECT_NAME

Command name

Root object type

ROOT_OBJECT_TYPE

COMMAND

Root object name

ROOT_OBJECT_NAME

Command name

Object ID

OBJECT_ID

COMMAND

Occurrence

OCCURRENCE

START

Start time

START_TIME

Start time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0800

Scheduler service name

H1

Scheduler service name

Host name for execution request

H5

Name of the host that requested the operation

Message ID

H6

Always - (hyphen)

Option

H7

Option specified when the command was executed

Legend:

N/A: Not applicable

(56) Attributes of the command or JP1/AJS3 - View operation end event

The attributes of the command or JP1/AJS3 - View operation end event are as follows.

Table A‒57: Attributes of the command or JP1/AJS3 - View operation end event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

00004191

Message

N/A

KAVS0716-I

The command or JP1/AJS2 - View operation ended. (Operation name: command-name)

command-name: Upper-case command name formed after the prefix ajs is removed

For example, if the command name is ajsentry, ENTRY is set.

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

One of the following user names:

  • Name of the user who executed the command.

  • Name of the JP1 user who is using JP1/AJS3 - View.

  • Name of the JP1 user who called the API of JP1/AJS3 - Web Console

When the operation is performed by executing a command, the value of the JP1_USERNAME environment variable is set.

If the environment variable has not been set, the name of the OS user who executed the command is set.

If a JP1 user unauthorized to perform the operation attempts the operation, a NULL string is set.

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

COMMAND

Object name

OBJECT_NAME

Command name

Root object type

ROOT_OBJECT_TYPE

COMMAND

Root object name

ROOT_OBJECT_NAME

Command name

Object ID

OBJECT_ID

COMMAND

Occurrence

OCCURRENCE

END

Start time

START_TIME

Start time

End time

END_TIME

End time

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0800

Scheduler service name

H1

Scheduler service name

Host name for execution request

H5

Name of the host that requested the operation

Message ID

H6

ID of the message for the operation result.

0 (zero) if the operation terminates normally.

Option

H7

Option specified when the command was executed

Legend:

N/A: Not applicable

(57) Attributes of the log file trap event

The attributes of the log file trap event are as follows.

Table A‒58: Attributes of the log file trap event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041A0

Message

N/A

One line of logged data

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Notice

Product name

PRODUCT_NAME

In Windows: /HITACHI/JP1/NT_LOGTRAP

In UNIX: /HITACHI/JP1/UX_LOGTRAP

Object type

OBJECT_TYPE

LOGFILE

Object name

OBJECT_NAME

Log file name

Root object type

ROOT_OBJECT_TYPE

LOGFILE

Root object name

ROOT_OBJECT_NAME

Log file name

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Product name

PPNAME

In Windows: /HITACHI/JP1/NT_LOGTRAP

In UNIX: /HITACHI/JP1/UX_LOGTRAP

Execution ID

T1

Number identifying the execution of the Log file trap job

Legend:

N/A: Not applicable

(58) Attributes of the event action control - manager start event

The attributes of the event action control - manager start event are as follows.

Table A‒59: Attributes of the event action control - manager start event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041A1

Message

N/A

KAVT0498-I

JP1/AJS2 event action manager will now start.

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

  • In Windows: Account for the JP1/AJS3 service (default: SYSTEM)

  • In UNIX: root

If the JP1_USERNAME environment variable is set, its value is used.

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/Automatic Job Management System 2 EVAction Manager

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

JP1/Automatic Job Management System 2 EVAction Manager

Occurrence

OCCURRENCE

START

Start time

START_TIME

Start time of the event action control - manager

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Legend:

N/A: Not applicable

(59) Attributes of the event action control - manager end event

The attributes of the event action control - manager end event are as follows.

Table A‒60: Attributes of the event action control - manager end event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041A2

Message

N/A

KAVT0499-I

JP1/AJS2 event action manager will now end.

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

  • In Windows: Account for the JP1/AJS3 service (default: SYSTEM)

  • In UNIX: root

If the JP1_USERNAME environment variable is set, its value is used.

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/Automatic Job Management System 2 EVAction Manager

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

JP1/Automatic Job Management System 2 EVAction Manager

Occurrence

OCCURRENCE

END

Start time

START_TIME

End time of the event action control - manager

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Legend:

N/A: Not applicable

(60) Attributes of the event action control - agent start event

The attributes of the event action control - agent start event are as follows.

Table A‒61: Attributes of the event action control - agent start event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041A3

Message

N/A

KAVT0900-I

JP1/AJS2 event action agent will now start.

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

  • In Windows: Account for the JP1/AJS3 service (default: SYSTEM)

  • In UNIX: root

If the JP1_USERNAME environment variable is set, its value is used.

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/Automatic Job Management System 2 EVAction Agent

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

JP1/Automatic Job Management System 2 EVAction Agent

Occurrence

OCCURRENCE

START

Start time

START_TIME

Start time of the event action control - agent

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Legend:

N/A: Not applicable

(61) Attributes of the event action control - agent end event

The attributes of the event action control - agent end event are as follows.

Table A‒62: Attributes of the event action control - agent end event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041A4

Message

N/A

KAVT0901-I

JP1/AJS2 event action agent will now end.

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

  • In Windows: Account for the JP1/AJS3 service (default: SYSTEM)

  • In UNIX: root

If the JP1_USERNAME environment variable is set, its value is used.

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SERVICE

Object name

OBJECT_NAME

JP1/Automatic Job Management System 2 EVAction Agent

Root object type

ROOT_OBJECT_TYPE

SERVICE

Root object name

ROOT_OBJECT_NAME

JP1/Automatic Job Management System 2 EVAction Agent

Occurrence

OCCURRENCE

END

Start time

START_TIME

End time of the event action control - agent

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

0600

Legend:

N/A: Not applicable

(62) Attributes of the event indicating that communication with a broadcast-execution destination agent is impossible

The attributes of the event indicating that communication with a broadcast-execution destination agent is impossible are as follows.

Table A‒63: Attributes of the event indicating that communication with a broadcast-execution destination agent is impossible

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041B0

Message

N/A

KAVS8100-E Cannot communicate with the execution environment for flexible jobs.(maintenance-information-1, maintenance-information-2, maintenance-information-3, maintenance-information-4)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

scheduler-service-name:/root-jobnet-name

Object ID

OBJECT_ID

scheduler-service-name:/jobnet-name/job-name

Occurrence

OCCURRENCE

END

Result code

RESULT_CODE

Result code

Source host name

JP1_SOURCEHOST

Name of the destination agent host for which the event occurred

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

1110

Execution ID

A3

Execution ID

Flexible job ID

FX_ID

Identifier of a flexible job

Destination host name

FX_DSTAGTNAME

Host name of a destination agent

Destination IP address

FX_DSTAGTIP

IP address of a destination agent

Manager host name

FX_MGRNAME

Name of the manager host

Legend:

N/A: Not applicable

(63) Attributes of the event indicating that the monitoring of the execution time of a broadcast-execution destination agent timed out

The attributes of the event indicating that the monitoring of the execution time of a broadcast-execution destination agent timed out are as follows.

Table A‒64: Attributes of the event indicating that the monitoring of the execution time of a broadcast-execution destination agent timed out

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041B1

Message

N/A

KAVS8101-E Status monitoring of the flexible job will be stopped. (unit-full-name:execution-ID, maintenance-information)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

scheduler-service-name:/root-jobnet-name

Object ID

OBJECT_ID

scheduler-service-name:/jobnet-name/job-name

Occurrence

OCCURRENCE

END

Result code

RESULT_CODE

Result code

Source host name

JP1_SOURCEHOST

Name of the destination agent host for which the event occurred

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

1110

Execution ID

A3

Execution ID

Flexible job ID

FX_ID

Identifier for the execution result of a flexible job

Destination host name

FX_DSTAGTNAME

Host name of a destination agent

Destination IP address

FX_DSTAGTIP

IP address of a destination agent

Manager host name

FX_MGRNAME

Name of the manager host

Legend:

N/A: Not applicable

(64) Attributes of the event indicating that an attempt to confirm the start of a job on a broadcast-execution destination agent timed out

The attributes of the event indicating that an attempt to confirm the start of a job on a broadcast-execution destination agent timed out are as follows.

Table A‒65: Attributes of the event indicating that an attempt to confirm the start of a job on a broadcast-execution destination agent timed out

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041B2

Message

N/A

KAVS8116-E Status monitoring will stop, because the start of the flexible job could not be confirmed. (unit-full-name:execution-ID, maintenance-information)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

scheduler-service-name:/root-jobnet-name

Object ID

OBJECT_ID

scheduler-service-name:/jobnet-name/job-name

Occurrence

OCCURRENCE

END

Result code

RESULT_CODE

Result code

Source host name

JP1_SOURCEHOST

Name of the destination agent host for which the event occurred

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

1110

Execution ID

A3

Execution ID

Flexible job ID

FX_ID

Identifier for the execution result of a flexible job

Destination host name

FX_DSTAGTNAME

Host name of a destination agent

Destination IP address

FX_DSTAGTIP

IP address of a destination agent

Manager host name

FX_MGRNAME

Name of the manager host

Legend:

N/A: Not applicable

(65) Attributes of the event indicating that the execution of a flexible job ended (ended normally) on a broadcast-execution destination agent

The attributes of the event indicating that the execution of a flexible job ended (ended normally) on a broadcast-execution destination agent are as follows.

Table A‒66: Attributes of the event indicating that the execution of a flexible job ended (ended normally) on a broadcast-execution destination agent

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041B3

Message

N/A

KAVS8138-I The flexible job was executed. (unit-full-name : execution-ID , return-code, destination-agent-host-name , maintenance-information)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

scheduler-service-name:/root-jobnet-name

Object ID

OBJECT_ID

scheduler-service-name:/jobnet-name/job-name

Occurrence

OCCURRENCE

END

Result code

RESULT_CODE

Result code

Source host name

JP1_SOURCEHOST

Name of the destination agent host for which the event occurred

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

1110

Execution ID

A3

Execution ID

Flexible job ID

FX_ID

Identifier for the execution result of a flexible job

Destination host name

FX_DSTAGTNAME

Host name of a destination agent

Destination IP address

FX_DSTAGTIP

IP address of a destination agent

Standard error

FX_STDERR

Data that a user program executed on a destination agent sent to the standard error output

Start time

FX_STARTTIME

Job execution start time on a destination agent

End time

FX_ENDTIME

Job execution end time on a destination agent

Manager host name

FX_MGRNAME

Name of the manager host

Legend:

N/A: Not applicable

(66) Attributes of the event indicating that the execution of a flexible job ended (ended with a warning) on a broadcast-execution destination agent

The attributes of the event indicating that the execution of a flexible job ended (ended with a warning) on a broadcast-execution destination agent are as follows.

Table A‒67: Attributes of the event indicating that the execution of a flexible job ended (ended with a warning) on a broadcast-execution destination agent

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041B4

Message

N/A

KAVS8138-I The flexible job was executed. (unit-full-name : execution-ID , return-code, destination-agent-host-name , maintenance-information)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Warning

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

scheduler-service-name:/root-jobnet-name

Object ID

OBJECT_ID

scheduler-service-name:/jobnet-name/job-name

Occurrence

OCCURRENCE

END

Result code

RESULT_CODE

Result code

Source host name

JP1_SOURCEHOST

Name of the destination agent host for which the event occurred

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

1110

Execution ID

A3

Execution ID

Flexible job ID

FX_ID

Identifier for the execution result of a flexible job

Destination host name

FX_DSTAGTNAME

Host name of a destination agent

Destination IP address

FX_DSTAGTIP

IP address of a destination agent

Standard error

FX_STDERR

Data that a user program executed on a destination agent sent to the standard error output

Start time

FX_STARTTIME

Job execution start time on a destination agent

End time

FX_ENDTIME

Job execution end time on a destination agent

Manager host name

FX_MGRNAME

Name of the manager host

Legend:

N/A: Not applicable

(67) Attributes of the event indicating that the execution of a flexible job ended (ended abnormally) on a broadcast-execution destination agent

The attributes of the event indicating that the execution of a flexible job ended (ended abnormally) on a broadcast-execution destination agent are as follows.

Table A‒68: Attributes of the event indicating that the execution of a flexible job ended (ended abnormally) on a broadcast-execution destination agent

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041B5

Message

N/A

KAVS8138-I The flexible job was executed. (unit-full-name : execution-ID , return-code, destination-agent-host-name , maintenance-information)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

scheduler-service-name:/root-jobnet-name

Object ID

OBJECT_ID

scheduler-service-name:/jobnet-name/job-name

Occurrence

OCCURRENCE

END

Result code

RESULT_CODE

Result code

Source host name

JP1_SOURCEHOST

Name of the destination agent host for which the event occurred

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

1110

Execution ID

A3

Execution ID

Flexible job ID

FX_ID

Identifier for the execution result of a flexible job

Destination host name

FX_DSTAGTNAME

Host name of a destination agent

Destination IP address

FX_DSTAGTIP

IP address of a destination agent

Standard error

FX_STDERR

Data that a user program executed on a destination agent sent to the standard error output

Start time

FX_STARTTIME

Job execution start time on a destination agent

End time

FX_ENDTIME

Job execution end time on a destination agent

Manager host name

FX_MGRNAME

Name of the manager host

Legend:

N/A: Not applicable

(68) Attributes of the event indicating that execution of a flexible job ended (ended normally) on all broadcast-execution destination agents

The attributes of the event indicating that execution of a flexible job ended (ended normally) on all broadcast-execution destination agents are as follows.

Table A‒69: Attributes of the event indicating that execution of a flexible job ended (ended normally) on all broadcast-execution destination agents

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041B6

Message

N/A

KAVS8149-I Broadcast execution has finished. (return-code , manager-host-name , full-unit-name , execution-ID , maintenance-information)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Information

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

scheduler-service-name:/root-jobnet-name

Object ID

OBJECT_ID

scheduler-service-name:/jobnet-name/job-name

Occurrence

OCCURRENCE

END

Result code

RESULT_CODE

Result code

Source host name

JP1_SOURCEHOST

Host name of the broadcast agent for which the event occurred

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

1110

Execution ID

A3

Execution ID

Flexible job ID

FX_ID

Identifier for the execution result of a flexible job

Start time

FX_STARTTIME

Job execution start time on a destination agent

End time

FX_ENDTIME

Job execution end time on a destination agent

Manager host name

FX_MGRNAME

Name of the manager host

Legend:

N/A: Not applicable

(69) Attributes of the event indicating that execution of a flexible job ended (ended with a warning) on all broadcast-execution destination agents

The attributes of the event indicating that execution of a flexible job ended (ended with a warning) on all broadcast-execution destination agents are as follows.

Table A‒70: Attributes of the event indicating that execution of a flexible job ended (ended with a warning) on all broadcast-execution destination agents

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041B7

Message

N/A

KAVS8149-I Broadcast execution has finished. (return-code , manager-host-name , full-unit-name , execution-ID , maintenance-information)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Warning

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

scheduler-service-name:/root-jobnet-name

Object ID

OBJECT_ID

scheduler-service-name:/jobnet-name/job-name

Occurrence

OCCURRENCE

END

Result code

RESULT_CODE

Result code

Source host name

JP1_SOURCEHOST

Host name of the broadcast agent for which the event occurred

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

1110

Execution ID

A3

Execution ID

Flexible job ID

FX_ID

Identifier for the execution result of a flexible job

Start time

FX_STARTTIME

Job execution start time on a destination agent

End time

FX_ENDTIME

Job execution end time on a destination agent

Manager host name

FX_MGRNAME

Name of the manager host

Legend:

N/A: Not applicable

(70) Attributes of the event indicating that execution of a flexible job ended (ended abnormally) on all broadcast-execution destination agents

The attributes of the event indicating that execution of a flexible job ended (ended abnormally) on all broadcast-execution destination agents are as follows.

Table A‒71: Attributes of the event indicating that execution of a flexible job ended (ended abnormally) on all broadcast-execution destination agents

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041B8

Message

N/A

KAVS8149-I Broadcast execution has finished. (return-code , manager-host-name , full-unit-name , execution-ID , maintenance-information)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Error

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

scheduler-service-name:/root-jobnet-name

Object ID

OBJECT_ID

scheduler-service-name:/jobnet-name/job-name

Occurrence

OCCURRENCE

END

Result code

RESULT_CODE

Result code

Source host name

JP1_SOURCEHOST

Host name of the broadcast agent for which the event occurred

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

1110

Execution ID

A3

Execution ID

Flexible job ID

FX_ID

Identifier for the execution result of a flexible job

Start time

FX_STARTTIME

Job execution start time on a destination agent

End time

FX_ENDTIME

Job execution end time on a destination agent

Manager host name

FX_MGRNAME

Name of the manager host

Legend:

N/A: Not applicable

(71) Attributes of the event indicating that execution of a flexible job ended (when there was no broadcast-execution destination agent)

The attributes of the event indicating that execution of a flexible job ended (when there was no broadcast-execution destination agent) are as follows.

Table A‒72: Attributes of the event indicating that execution of a flexible job ended (when there was no broadcast-execution destination agent)

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041B9

Message

N/A

KAVS8159-W There is no destination agent for broadcast execution. (manager-host-name, full-unit-name, execution-ID, maintenance-information)

Detailed information

N/A

N/A

Extended

Common information

Severity

SEVERITY

Warning

User name

USER_NAME

User who registered the jobnet (JP1 user name)

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

JOB

Object name

OBJECT_NAME

scheduler-service-name:/jobnet-name/job-name

Root object type

ROOT_OBJECT_TYPE

JOBNET

Root object name

ROOT_OBJECT_NAME

scheduler-service-name:/root-jobnet-name

Object ID

OBJECT_ID

scheduler-service-name:/jobnet-name/job-name

Occurrence

OCCURRENCE

END

Result code

RESULT_CODE

Result code

Source host name

JP1_SOURCEHOST

Host name of the broadcast agent for which the event occurred

Specific information

Platform

PLATFORM

In Windows: NT

In UNIX: UNIX

Version of AJS action

ACTION_VERSION

1110

Execution ID

A3

Execution ID

Flexible job ID

FX_ID

Identifier for the execution result of a flexible job

Start time

FX_STARTTIME

Job execution start time on a destination agent

End time

FX_ENDTIME

Job execution end time on a destination agent

Manager host name

FX_MGRNAME

Name of the manager host

Legend:

N/A: Not applicable

(72) Attributes of the process abnormal end event (compatible event)

The attributes of the process abnormal end event are as follows.

Table A‒73: Attributes of the process abnormal end event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041F0

Message

N/A

KNAD3737-E

JP1/AJS3 : managed-process-name terminated abnormally.

Extended

Common information

Severity

SEVERITY

Error

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SPMD

Object name

OBJECT_NAME

Name of the process that ended abnormally

Occurrence

OCCURRENCE

NOTICE

Legend:

N/A: Not applicable

(73) Attributes of the process start timeout event (compatible event)

The attributes of the process start timeout event are as follows.

Table A‒74: Attributes of the process start timeout event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041F1

Message

N/A

KNAD3613-W

JP1/AJS3 timeout occurred in managed-process-name. continue

Extended

Common information

Severity

SEVERITY

Warning

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SPMD

Object name

OBJECT_NAME

Name of the process that failed to start within the timeout period

Occurrence

OCCURRENCE

NOTICE

Legend:

N/A: Not applicable

(74) Attributes of the process restart completion event (compatible event)

The attributes of the process restart completion event are as follows.

Table A‒75: Attributes of the process restart completion event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041F2

Message

N/A

KNAD3616-I

The restart of the JP1/AJS3 of managed-process-name has completed.

Extended

Common information

Severity

SEVERITY

Information

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SPMD

Object name

OBJECT_NAME

Name of the process that restarted

Occurrence

OCCURRENCE

NOTICE

Legend:

N/A: Not applicable

(75) Attributes of the pre-start failure event (compatible event)

The attributes of the pre-start failure event are as follows.

Table A‒76: Attributes of the pre-start failure event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041F3

Message

N/A

KNAD3953-E

JP1/AJS3 pre-startup: pre-startup-process-name Fail

Extended

Common information

Severity

SEVERITY

Error

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SPMD

Object name

OBJECT_NAME

Failed command name

Occurrence

OCCURRENCE

NOTICE

Legend:

N/A: Not applicable

(76) Attributes of the JP1/AJS3 start completed event

The attributes of the JP1/AJS3 start completed event is as follows.

Table A‒77: Attributes of the JP1/AJS3 start completed event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041C0

Message

N/A

KNAD3604-I

JP1/AJS3 startup has finished

Extended

Common information

Severity

SEVERITY

Information

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SPMD

Object name

OBJECT_NAME

JP1/AJS2

Occurrence

OCCURRENCE

NOTICE

Legend:

N/A: Not applicable

(77) Attributes of the JP1/AJS3 stop event

The Attributes of the JP1/AJS3 stop event are as follows.

Table A‒78: Attributes of the JP1/AJS3 stop event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041C1

Message

N/A

KNAD3743-I

JP1/AJS3 has terminated

Extended

Common information

Severity

SEVERITY

Information

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SPMD

Object name

OBJECT_NAME

JP1/AJS2

Occurrence

OCCURRENCE

NOTICE

Legend:

N/A: Not applicable

(78) Attributes of the managed process start completed event

The attributes of the managed process start completed event are as follows.

Table A‒79: Attributes of the managed process start completed event

Attribute type

Type

Attribute name

Contents

Basic

Basic

Basic

Basic

Message

N/A

KNAD3617-I

The JP1/AJS3 managed-process-name startup has finished

Extended

Common information

Severity

SEVERITY

Information

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SPMD

Object name

OBJECT_NAME

Name of the process that started

Occurrence

OCCURRENCE

NOTICE

Legend:

N/A: Not applicable

(79) Attributes of the managed process stop event

The attributes of the managed process stop event are as follows.

Table A‒80: Attributes of the managed process stop event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041C3

Message

N/A

KNAD3746-I

The JP1/AJS3 managed-process-name terminated

Extended

Common information

Severity

SEVERITY

Information

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SPMD

Object name

OBJECT_NAME

Name of the process that stopped

Occurrence

OCCURRENCE

NOTICE

Legend:

N/A: Not applicable

(80) Attributes of the managed process abnormal end event

The attributes of the managed process abnormal end event are as follows.

Table A‒81: Attributes of the managed process abnormal end event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041C4

Message

N/A

KNAD3737-E

The JP1/AJS3 managed-process-name terminated abnormally.

Extended

Common information

Severity

SEVERITY

Error

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SPMD

Object name

OBJECT_NAME

Name of the process that ended abnormally

Occurrence

OCCURRENCE

NOTICE

Legend:

N/A: Not applicable

(81) Attributes of the managed process start timeout event

The attributes of the managed process start timeout event are as follows.

Table A‒82: Attributes of the managed process start timeout event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041C5

Message

N/A

KNAD3613-W

JP1/AJS3 timeout occurred in managed-process-name continue

Extended

Common information

Severity

SEVERITY

Warning

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SPMD

Object name

OBJECT_NAME

Name of the process that failed to start within the timeout period

Occurrence

OCCURRENCE

NOTICE

Legend:

N/A: Not applicable

(82) Attributes of the managed process restart completed event

Attributes of the managed process restart completed event are as follows.

Table A‒83: Attributes of the managed process restart completed event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041C6

Message

N/A

KNAD3616-I

JP1/AJS3 managed-process-name completed the restart up

Extended

Common information

Severity

SEVERITY

Information

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SPMD

Object name

OBJECT_NAME

Name of the process that restarted

Occurrence

OCCURRENCE

NOTICE

Legend:

N/A: Not applicable

(83) Attributes of the pre-start process failure event

The attributes of the pre-start process failure event are as follows.

Table A‒84: Attributes of the pre-start process failure event

Attribute type

Type

Attribute name

Contents

Basic

Event ID

N/A

000041C7

Message

N/A

KNAD3953-E

JP1/AJS3 pre-startup : pre-startup-process-name Fail

Extended

Common information

Severity

SEVERITY

Error

Product name

PRODUCT_NAME

/HITACHI/JP1/AJS2

Object type

OBJECT_TYPE

SPMD

Object name

OBJECT_NAME

Failed command name

Occurrence

OCCURRENCE

NOTICE

Legend:

N/A: Not applicable