Preface
This manual describes how to operate Job Management Partner 1/Automatic Job Management System 3 (abbreviated hereafter to JP1/AJS3). Read this manual in conjunction with the manual JP1/Automatic Job Management System 3 Overview, which describes the JP1/AJS3 functions, the JP1/Automatic Job Management System 3 System Design (Configuration) Guide, which describes JP1/AJS3 design, and the JP1/Automatic Job Management System 3 System Design (Work Tasks) Guide.
- Organization of this preface
■ Intended readers
This manual is intended for:
-
Those who wish to operate an automatic job execution system with JP1/AJS3 and those who design automatic job execution systems.
-
Those who operate an automatic job execution system with JP1/AJS3.
■ Organization of this manual
This manual organized into the following chapters. The manual is a common reference for all supported operating systems. Any platform-dependent differences in functionality are noted in the manual.
- 1. Overview of Operation Using JP1/AJS3
-
Chapter 1 provides an overview of system operation using JP1/AJS3.
- 2. Backup and Recovery
-
Chapter 2 describes how to perform backup and recovery in a system that uses JP1/AJS3.
- 3. Backing Up and Restoring Jobnets
-
Chapter 3 describes how to back up and restore the definition information of jobnets and the registration status of each jobnet.
- 4. Monitoring Jobnets
-
Chapter 4 describes the execution results of jobnets and how to monitor jobnet execution time.
- 5. Monitoring Capacities
-
Chapter 5 describes how to monitor capacities in JP1/AJS3.
- 6. Starting and Stopping JP1/AJS3 Services
-
Chapter 6 describes how to start and stop JP1/AJS3 services.
- 7. Changing the Settings During Operation
-
Chapter 7 describes how to change the environment and settings during JP1/AJS3 operation.
- 8. Operating Methods
-
Chapter 8 provides know-how for operating JP1/AJS3 efficiently.
- 9. Database Maintenance
-
Chapter 9 describes how to maintain the JP1/AJS3 database.
- 10. Operation in a Cluster System
-
Chapter 10 describes the flow of processing when JP1/AJS3 is used in a cluster system.
- 11. Disaster Recovery in JP1/AJS3
-
Chapter 11 describes the disaster recovery mode of JP1/AJS3, the preconditions for its use, and the necessary system configuration. It also describes how to change the environment in which disaster recovery operates.
- 12. Case Studies
-
Chapter 12 presents a number of operating scenarios for JP1/AJS3, and describes how to best configure and operate JP1/AJS3 in each scenario.
■ Organization of JP1/AJS3 manuals and choosing the right manuals
There are 11 JP1/AJS3 manuals. The following table summarizes their contents.
No. |
Manual |
Contents |
---|---|---|
1 |
Getting Started (3021-3-B11(E)) |
|
2 |
Overview (3021-3-B12(E)) |
|
3 |
System Design (Configuration) Guide (3021-3-B13(E)) |
|
4 |
System Design (Work Tasks) Guide (3021-3-B14(E)) |
|
5 |
Configuration Guide (3021-3-B15(E)) |
|
6 |
Administration Guide (3021-3-B16(E)) |
|
7 |
Troubleshooting (3021-3-B17(E)) |
|
8 |
Operator's Guide (3021-3-B18(E)) |
|
9 |
Command Reference (3021-3-B19(E)) |
|
10 |
Linkage Guide (3021-3-B20(E)) |
|
11 |
Messages (3021-3-B21(E)) |
|
Getting Started refers to JP1 Version 11 Job Management: Getting Started (Job Scheduler). "JP1 Version 11 JP1/Automatic Job Management System 3" is omitted in other manual names.
Use the following illustration and table as a guide to determine the manuals you need to read.
Purpose |
Required reading |
Read as necessary |
---|---|---|
To learn about the basic usage of JP1/AJS3 |
|
|
To learn about JP1/AJS3's functionalities |
|
|
To configure a system (including installation and setup) that automatically runs jobs |
|
|
To design work tasks that will be automated (including job definitions and schedule definitions) |
|
|
To learn about monitoring and maintaining a running system |
|
|
To learn about what action you need to take for problems that occur during operation |
|
|
To learn about operating JP1/AJS3 |
|
|
■ Replacing the term JP1/AJS3 - Agent with JP1/AJS3 - Agent Minimal Edition in this manual
This manual uses the term JP1/AJS3 - Agent to mean both JP1/AJS3 - Agent and JP1/AJS3 - Agent Minimal Edition. If you use JP1/AJS3 - Agent Minimal Edition, replace the term JP1/AJS3 - Agent with the term JP1/AJS3 - Agent Minimal Edition while reading this manual. If, however, a difference between JP1/AJS3 - Agent Minimal Edition and JP1/AJS3 - Agent is described, both terms (JP1/AJS3 - Agent Minimal Edition and JP1/AJS3 - Agent) are used.