Pagescans
- Organization of this page
Overview
The Pagescans alarm monitors the number of page scans that occurred per second. If the number of page scans is greater than the threshold, memory might be insufficient.
- Note:
-
This alarm cannot be used on Linux.
Primary settings
|
PFM - Web Console alarm property |
Settings |
|
|---|---|---|
|
Item |
Detailed item |
|
|
Main Information |
Product |
UNIX |
|
Alarm message |
Pagescan rate is %CVS/sec |
|
|
Enable alarm |
Selected |
|
|
Alarm notification |
Notify when the state changed |
|
|
Notification target |
State changes for the alarm |
|
|
Evaluate all data |
Do not specify. |
|
|
Monitoring time range |
Always monitor |
|
|
Report alarm when the following damping condition is reached |
Selected |
|
|
occurrence(s) during |
2 |
|
|
interval(s) |
3 |
|
|
Alarm Conditions |
Record |
System Summary Overview (PI) |
|
Field |
Page Scans/sec |
|
|
Abnormal condition |
Page Scans/sec > 150 |
|
|
Warning condition |
Page Scans/sec > 100 |
|
|
Actions |
|
-- |
|
Command |
-- |
|
|
SNMP |
Abnormal, Warning, Normal |
|
- Legend:
-
--: Setting is always ignored.
Alarm tables
PFM UNIX Template Alarms 09.00
PFM UNIX Template Alarms [MEM] 09.00
Related reports
Reports/UNIX/Troubleshooting/Real-Time/Major Page Faults - Top 10 Processes