--
|
First Registration Date
|
Shows the first date/time on which the service was recognized by PFM - Manager.
|
Last Registration Date
|
Shows the last date/time on which the service was recognized by PFM - Manager.
|
Data Model Version
|
Shows the data model version.
|
General
|
--
|
Stores information such as host names and folder names. The properties stored in this folder cannot be modified.
|
Directory
|
Shows the name of the current folder in which the service is running.
|
Host Name
|
Shows the name of the host on which the service is running.
|
Process ID
|
Shows the process ID of the service.
|
Physical Address
|
Shows the IP address and port number of the host on which the service runs if IPv6 communication is disabled.
|
Physical Address(IPv4)
|
Shows the IPv4-format IP address of the host on which the service runs if IPv6 communication is enabled.
|
Physical Address(IPv6)
|
Shows the IPv6-format IP address of the host on which the service runs if IPv6 communication is enabled.
|
Port Number
|
Shows the number of the port that is used by the service if IPv6 communication is enabled.
|
User Name
|
Shows the name of the user that executed the service process.
|
Time Zone
|
Shows the time zone used by the service.
|
System
|
--
|
Stores information on the OS under which the service was started. The properties stored in this folder cannot be modified.
|
CPU Type
|
Shows the CPU type.
|
Hardware ID
|
Shows the hardware ID.
|
OS Type
|
Shows the OS type.
|
OS Name
|
Shows the OS name.
|
OS Version
|
Shows the OS version.
|
Network Services
|
--
|
Stores information about the communication common library of Performance Management. The properties stored in this folder
cannot be modified.
|
Build Date
|
Shows the Remote Monitor Collector service creation date.
|
INI File
|
Shows the name of the folder that stores the jpcns.ini file.
|
Network Services
|
Service
|
--
|
Stores information about the service. The properties stored in this folder cannot be modified.
|
Description
|
Shows the host name in the following format:
instance-name_host-name
|
Local Service Name
|
Shows the service ID.
|
Remote Service Name
|
Shows the service ID of the Remote Monitor Store service to which Remote Monitor Collector service connects.
|
EP Service Name
|
Shows the service ID of the Correlator service of the PFM - Manager host at the connection destination.
|
AH Service Name
|
Shows the service ID of the Action Handler service that is on the same host.
|
JP1 Event Configurations
|
--
|
Stores the properties of JP1 event generation conditions.
|
Each service
|
From the list items in the Remote Monitor Collector service, Remote Monitor Store service, Action Handler service, and Status
Server service, select Yes or No to specify whether each service should generate JP1 system events.
|
JP1 Event Send Host
|
Specifies the target event server name for JP1/Base. You can specify only an event server that is running on the logical or
physical host on the same machine as the Action Handler service. The values that can be specified are alphanumeric characters,
the period (.), and the dash (-) for a total of between 0 and 255 bytes. If a value outside the range is specified, it is assumed that no value is specified.
If value specification is omitted, the host on which the Action Handler service is running is used as the event-generation
source host. If localhost is specified, it is assumed that the physical host is specified.
|
Monitoring Console Host
|
When the browser of PFM - Web Console is to be started during the startup of the monitor of JP1/IM - Manager, this property
specifies the PFM - Web Console host to be started. The values that can be specified are alphanumeric characters, the period
(.), and the dash (-) for a total of between 0 and 255 bytes. If a value outside the range is specified, it is assumed that no value is specified.
If value specification is omitted, the PFM - Manager host at the connection destination is assumed.
|
Monitoring Console Port
|
Specifies the port number (HTTP request port number) of PFM - Web Console to be started. A value between 1 and 65,535 can
be specified. If a value outside the range is specified, it is assumed that no value is specified. If value specification
is omitted, 20,358 is set.
|
Monitoring Console Https
|
Specifies whether to use HTTPS-encrypted communication to access PFM - Web Console when PFM - Web Console is started by JP1/IM
- Manager monitor startup. By default, this property is set to No.
|
JP1 Event Configurations
|
Alarm
|
JP1 Event Mode
|
Specifies whether a JP1 system event or JP1 user event will be generated when an alarm status changes.
|
Detail Records
|
--
|
Stores PD record type record properties. The record IDs of collected records are shown in bold characters.
|
Detail Records
|
record-ID#
|
--
|
Stores record properties.
|
Description
|
Shows record descriptions. This property cannot be modified.
|
Log
|
From the list items, select Yes or No to specify whether to record records in the Remote Monitor Store database. If this value is Yes and Collection Interval is greater than 0, records are recorded in the database.
|
Log(ITSLM)
|
Shows Yes or No to indicate whether records are to be saved in the Store database of PFM - RM for Virtual Machine from JP1/SLM - Manager.
This value is fixed to No.
|
Monitoring(ITSLM)
|
Shows the value (Yes or No) that was set in JP1/SLM - Manager to indicate whether records are to be sent to JP1/SLM - Manager. This value is fixed to
No.
|
Collection Interval
|
Specifies the data collection interval. The value that can be specified is 0-2,147,483,647 seconds, in 1-second increments.
If 0 is specified, no data is collected.
|
Collection Offset
|
Specifies the offset for starting data collection. The value that can be specified is 0-32,767 seconds, in 1-second increments,
and must be within the value range specified in Collection Interval. The data collection recording time is the same as Collection Interval and does not depend on the Collection Offset value.
|
LOGIF
|
Specifies the condition for recording records in the database. Only those records that satisfy the condition are recorded
in the database. Shows the conditional expression (character string) created in the LOGIF Expression Editor window, which
opens when LOGIF is clicked in the lower frame of the Properties window of the service displayed from the Services page of PFM - Web Console.
|
Interval Records
|
--
|
Stores PI record type record properties. The record IDs of collected records are shown in bold characters.
|
Interval Records
|
record-ID#
|
--
|
Stores record properties.
|
Description
|
Shows record description. This property cannot be modified.
|
Log
|
From the list items, select Yes or No to specify whether to record records in the Remote Monitor Store database. If this value is Yes and Collection Interval is greater than 0, records are recorded in the database.
|
Log(ITSLM)
|
Shows Yes or No to indicate whether records are to be saved in the Store database of PFM - RM for Virtual Machine from JP1/SLM - Manager.
This value is fixed to No.
|
Monitoring(ITSLM)
|
Shows the value (Yes or No) that was set in JP1/SLM - Manager to indicate whether records are to be sent to JP1/SLM - Manager. This value is fixed to
No.
|
Collection Interval
|
Specifies the data collection interval. The value that can be specified is 0-2,147,483,647 seconds, in 1-second increments.
If 0 is specified, no data is collected.
|
Collection Offset
|
Specifies the offset for starting data collection. The value that can be specified is 0-32,767 seconds, in 1-second increments,
and must be within the value range specified in Collection Interval. The data collection recording time is the same as Collection Interval and does not depend on the Collection Offset value.
|
LOGIF
|
Specifies the condition for recording records in the database. Only those records that satisfy the condition are recorded
in the database. Shows the conditional expression (character string) created in the LOGIF Expression Editor window, which
opens when LOGIF is clicked in the lower frame of the Properties window of the service displayed from the Services page of PFM - Web Console.
|
Log Records
|
--
|
Stores PL record type record properties. This folder is not used by PFM - RM for Virtual Machine because it does not support
PL records.
|
Monitoring Targets
|
--
|
Stores the properties of hosts that are monitored by PFM - RM for Virtual Machine.
|
Monitoring Targets
|
monitoring-target-names
|
--
|
Shows a description of each monitoring target.
|
Target Name
|
Shows the name of a monitoring target. This property cannot be changed.
|
Target Host
|
Shows the name of a monitoring-target host. This property cannot be changed.
|
Health Check Configurations
|
Health Check for Target Hosts
|
Specifies whether to perform polling for monitoring-target hosts. This setting is applied to all monitoring-target hosts within
the instance.
|
Restart Configurations
|
--
|
Specifies the PFM service automatic restart condition. For details about the PFM service automatic restart function, see the
chapter that explains the functions of Performance Management in the JP1/Performance Management Planning and Configuration Guide.
|
Restart when Abnormal Status
|
Specifies whether to automatically restart a service when the Status Server service cannot normally collect the status of
the Action Handler service, Remote Monitor Collector service, or Remote Monitor Store service.
|
Restart when Single Service Running
|
Specifies whether to automatically restart a service when either the Remote Monitor Store service or Remote Monitor Collector
service has not been started.
|
Restart Configurations
|
Remote Monitor Collector
|
Auto Restart
|
Specifies whether to use the automatic restart function for the Remote Monitor Collector service.
|
Auto Restart - Interval (Minute)
|
Specifies the interval for checking the operating status of services (in minutes) when the automatic restart function is used.
|
Auto Restart - Repeat Limit
|
Specifies the number of times auto restart should be consecutively tried when the automatic restart function is used.
|
Scheduled Restart
|
Specifies whether to use the scheduled restart function for the Remote Monitor Collector service.
|
Scheduled Restart - Interval
|
Specifies the restart interval when the scheduled restart function is used.
|
Scheduled Restart - Interval Unit
|
Specifies the restart interval unit when the scheduled restart function is used.
|
Scheduled Restart - Origin - Year
|
Specifies an integer between 1971 and 2035 as the year for restart.
|
Scheduled Restart - Origin - Month
|
Specifies an integer between 1 and 12 as the month for restart.
|
Scheduled Restart - Origin - Day
|
Specifies an integer between 1 and 31 as the day for restart.
|
Scheduled Restart - Origin - Hour
|
Specifies an integer between 0 and 23 as the time (hour) for restart.
|
Scheduled Restart - Origin - Minute
|
Specifies an integer between 0 and 59 as the time (minutes) for restart.
|
Remote Monitor Store
|
Auto Restart
|
Specifies whether to use the automatic restart function for the Remote Monitor Store service.
|
Auto Restart - Interval (Minute)
|
Specifies the interval for checking the operating status of services (in minutes) when the automatic restart function is used.
|
Auto Restart - Repeat Limit
|
Specifies the number of times auto restart should be consecutively tried when the automatic restart function is used.
|
Scheduled Restart
|
Specifies whether to use the scheduled restart function for the Remote Monitor Store service.
|
Scheduled Restart - Interval
|
Specifies the restart interval when the scheduled restart function is used.
|
Scheduled Restart - Interval Unit
|
Specifies the restart interval unit when the scheduled restart function is used.
|
Scheduled Restart - Origin - Year
|
Specifies an integer between 1971 and 2035 as the year for restart.
|
Scheduled Restart - Origin - Month
|
Specifies an integer between 1 and 12 as the month for restart.
|
Scheduled Restart - Origin - Day
|
Specifies an integer between 1 and 31 as the day for restart.
|
Scheduled Restart - Origin - Hour
|
Specifies an integer between 0 and 23 as the time (hour) for restart.
|
Scheduled Restart - Origin - Minute
|
Specifies an integer between 0 and 59 as the time (minutes) for restart.
|
Action Handler
|
Auto Restart
|
Specifies whether to use the automatic restart function for the Action Handler service.
|
Auto Restart - Interval (Minute)
|
Specifies the interval for checking the operating status of services (in minutes) when the automatic restart function is used.
|
Auto Restart - Repeat Limit
|
Specifies the number of times auto restart should be consecutively tried when the automatic restart function is used.
|
Scheduled Restart
|
Specifies whether to use the scheduled restart function for the Action Handler service.
|
Scheduled Restart - Interval
|
Specifies the restart interval when the scheduled restart function is used.
|
Scheduled Restart - Interval Unit
|
Specifies the restart interval unit when the scheduled restart function is used.
|
Scheduled Restart - Origin - Year
|
Specifies an integer between 1971 and 2035 as the year for restart.
|
Scheduled Restart - Origin - Month
|
Specifies an integer between 1 and 12 as the month for restart.
|
Scheduled Restart - Origin - Day
|
Specifies an integer between 1 and 31 as the day for restart.
|
Scheduled Restart - Origin - Hour
|
Specifies an integer between 0 and 23 as the time (hour) for restart.
|
Scheduled Restart - Origin - Minute
|
Specifies an integer between 0 and 59 as the time (minutes) for restart.
|
ITSLM Connection Configuration
|
--
|
Shows information about the JP1/SLM - Manager to link with.
|
ITSLM Connection Configuration
|
ITSLM Connection
|
--
|
Shows information about the JP1/SLM - Manager to connect to.
|
ITSLM Host
|
Shows the host name of the connected JP1/SLM - Manager. This item is displayed only when a connection to JP1/SLM - Manager
is established.
|
ITSLM Port
|
Shows the port number of the connected JP1/SLM - Manager. This item is displayed only when a connection to JP1/SLM - Manager
is established.
|
MANAGE ITSLM CONNECTION
|
--
|
Shows whether to disconnect from the JP1/SLM - Manager.
|
DISCONNECT ITSLM CONNECTION
|
From a list, select the name of the JP1/SLM - Manager host that you want to disconnect from. If you select a blank item, no
action occurs. If no JP1/SLM - Manager hosts are connected, the list displays only a blank item.
|
Remote Monitor Configuration
|
--
|
Stores configuration properties specific to PFM - RM for Virtual Machine.
|
Remote Monitor Configuration
|
Remote Monitor
|
--
|
Shows an overview of the Remote Monitor Collector service.
|
Product
|
Shows the product ID 8. This property cannot be modified.
|
Instance
|
Shows the instance name specified by the jpcconf inst setup command. This property cannot be modified.
|
VM_Type
|
Shows the type of the virtual environment to be monitored. This property cannot be modified. The following character string
is displayed:
-
vmware (indicating VMware ESX or VMware ESXi)
-
hyperv (indicating Hyper-V)
-
virtage (indicating logical partitioning feature)
-
kvm (indicating KVM)
-
docker (indicating Docker environment)
|
Interval
|
Specifies the interval at which the collection process collects information. The value of this property can be changed.
|
Std_Category
|
Specifies whether the collection process outputs the basic information (PI, VI, and VM records) to a temporary performance
information file. The value of this property can be changed.
|
Cpu_Category
|
Specifies whether the collection process outputs the CPU information (HCI and VCI records) to a temporary performance information
file. The value of this property can be changed.
|
Memory_Category
|
Specifies whether the collection process outputs the memory information (HMI and VMI records) to a temporary performance information
file. The value of this property can be changed.
|
Disk_Category
|
Specifies whether the collection process outputs the disk information (HPDI, VPDI, HLDI, and VLDI records) to a temporary
performance information file. The value of this property can be changed.
|
Network_Category
|
Specifies whether the collection process outputs the network information (HNI and VNI records) to a temporary performance
information file. The value of this property can be changed.
|
HostUserID
|
Displays the user ID of the PFM - RM host. The value of this property can be changed.
|
HostPassword
|
Displays **** (fixed). This property cannot be changed.
|
HostDomain
|
Displays the domain name of the PFM - RM host. The value of this property can be changed.
|
SSH_Client
|
Specifies the absolute path of the SSH client (PuTTY) execution module (plink.exe). The value of this property can be changed.
|
Log_Size
|
Specifies the maximum size of each file in the collected log (megabytes). The value of this property can be changed.
|
UseVcpuMax
|
Specifies which is to be used as the CPU resource clock frequency: the frequency assigned to the virtual machine or the clock
frequency of the physical CPU. The value of this property can be changed.
|