G.2 Content of the Host.prm file
Settings information about PFM - Manager or PFM - Base, and about the single-instance PFM - Agent is output to the Host.prm file. The output information is equivalent to the output results of various commands and the content of definition files.
Content output to the Host.prm file
No. |
Header |
Description |
How to change the settings |
---|---|---|---|
Common parts |
|||
1 |
"******product-name******" |
The name of the PFM - Manager or PFM - Base product installed on the command execution host |
- |
2 |
"***Host Name" |
The monitoring host name obtained by the following command: For physical hosts: jpcconf host hostmode -display For logical hosts: hostmode : Logical hostname : logical-host-name |
- |
3 |
"***Product Information List" |
The product ID and version of PFM - Manager or PFM - Base installed on the command execution host |
- |
4 |
"***Port Number List" |
The list of port numbers obtained by the following commands: For physical hosts: jpcconf port list -key all For logical hosts: jpcconf port list -key all -lhost logical-host-name |
- |
5 |
"***Connection Target PFM Manager" |
PFM - Manager for the connection destination obtained by the following command: For physical hosts: jpcconf mgrhost display For logical hosts: jpcconf mgrhost display -lhost logical-host-name |
- |
6 |
"***Settings Information (Common)" |
Settings common to the services (content of the jpccomm.ini file) |
Edit the jpccomm.ini file. Note that some items cannot be edited. For details, see Startup information file (jpccomm.ini). |
7 |
"***Settings Information (Action Handler Service)" |
Action Handler service settings
Ignore any other items. |
Select Action Handler in the Services tree in PFM - Web Console, and then change the settings for the following nodes displayed in Properties:
|
8 |
"***Settings Information (PFM Service Auto-Restart Function)" |
Settings for the PFM Service Auto-Restart function#1. The order in which sections and labels are displayed differs depending on the order in which they were set. In addition, section names include service IDs#2. |
For each of the following services, select the service in the Services tree in PFM - Web Console, and then change the settings for Restart Configurations (displayed in Properties) and the nodes under it.
|
9 |
"***Settings Information (JP1 System Event)" |
Settings for issuing JP1 system events. The order in which sections and labels are displayed differs depending on the order in which they were set. In addition, section names include service IDs#2. |
For each of the following services, select the service in the Services tree in PFM - Web Console, and then change the settings for JP1 Event Configurations (displayed in Properties) and the nodes under it.
|
10 |
"***Host Information (jpchosts)" |
Host information settings (content of the jpchosts file) |
Edit the jpchosts file. |
11 |
"***Settings Information (PFM Service Startup at OS Startup)" |
Settings for starting the PFM service when the operating system is started. These settings are obtained by the following commands#1: For Windows: wmic service where ( DisplayName LIKE "PFM - %" ) get DisplayName, StartMode For UNIX: if [ -x /opt/jp1pc/jpc_start ];then echo jpc_start:available; else echo jpc_start:unavailable;fi;if [ -x /opt/jp1pc/jpc_stop ];then echo jpc_stop:available; else echo jpc_stop:unavailable;fi |
|
12 |
"***Settings Information (Common Account pfmhost)" |
Common account information for the instance environment (pfmhost) |
Use the jpcconf acc command. |
13 |
"***Settings Information (Common Account wmi)" |
Common account information for the monitoring target (wmi) |
Use the jpcconf acc command. |
14 |
"***Settings Information (Common Account ssh)" |
Common account information for the monitoring target (ssh) |
Use the jpcconf acc command. |
15 |
"***Settings Information (Auto Alarm Bind)" |
Auto alarm bind settings information (jpcautobind.cfg) |
Edit the jpcautobind.cfg file. |
Parts common to the single-instance PFM - Agent |
|||
16 |
"******product-name******" |
The product name of the single-instance PFM - Agent installed on the command execution host |
- |
17 |
"***Product Information" |
The product ID and version of PFM - Agent installed on the command execution host |
- |
18 |
"***Settings Information (Collector Service)" |
Collector service settings (content of the jpcagt.ini file)
Depending on the settings, the following items might be added after the operation starts #2:
|
Select Agent Collector in the Services tree in PFM - Web Console, and then change the settings for the following nodes displayed in Properties:
|
19 |
"***Settings Information (Store Service)" |
Settings for the Store service (content of the jpcsto.ini file)
Ignore any other items. |
|
20 |
"***ITSLM Connection Information" |
SLM connection settings |
Select the service to be changed in the Services tree in PFM - Web Console, and then change the [ITSLM Connection] settings for the [ITSLM Connection Configuration] node displayed in Properties. |
21 |
"***Alarm Bind Information" |
Settings for binding alarm tables |
Use the Bind Alarm Table method for each agent in the Agents tree in PFM - Web Console, or use the jpctool alarm command. |
22 |
"***Monitor Suspend Information" |
Monitoring suspension settings |
Use the Monitoring Suspension Settings method for each agent in the Agents tree in PFM - Web Console, or use the jpctool monitor command. |
Parts specific to PFM - Agent for Platform (Windows) |
|||
23 |
"***Configuration Information (Periodically-Executed User Command Function)" |
Configuration for the function for periodically executing user commands |
Select Agent Collector in the Services tree in PFM - Web Console, and then change the settings for the [User Command Setting] node displayed in Properties. |
24 |
"***Application Definition Information (Process Operation Status)" |
Whether processes are running (application definition) |
Select Agent Collector in the Services tree in PFM - Web Console, and then change the settings for the [Advanced application monitoring] node displayed in Properties. |
25 |
"***Application Definition Information (Application Operation Status)" |
Whether applications are running (application definition) |
Select Agent Collector in the Services tree in PFM - Web Console, and then change the settings for the [Application monitoring setting] node displayed in Properties. |
26 |
"***Settings Information (Collection of User Records)" |
Settings for collecting user records#1. Note that different values might be added to each device, regardless of these settings. |
Use the collection data addition utility. |
Parts specific to PFM - Agent for Platform (UNIX) |
|||
27 |
"***Configuration Information (Periodically-Executed User Command Function)" |
Configuration for the function for periodically executing user commands |
Select Agent Collector in the Services tree in PFM - Web Console, and then change the settings for the [User Command Setting] node displayed in Properties. |
28 |
"***Application Definition Information (Process Operation Status)" |
Whether processes are running (application definition) |
Select Agent Collector in the Services tree in PFM - Web Console, and then change the settings for the [Advanced application monitoring] node displayed in Properties. |
29 |
"***Application Definition Information (Application Operation Status)" |
Whether applications are running (application definition) |
Select Agent Collector in the Services tree in PFM - Web Console, and then change the settings for the [Application monitoring setting] node displayed in Properties. |
30 |
"***Settings Information (evfile)" |
Content of the event file#1 |
Change the settings contained in the event file (/opt/jp1pc/agtu/agent/evfile). |
31 |
"***Settings information (wgfile)" |
Content of the work group file#1 |
Change the settings contained in the work group file (/opt/jp1pc/agtu/agent/wgfile). |
#1: For logical hosts, this is not output.
#2: When the output files are compared, the applicable portions might be treated as differences.