3.1.2 Starting SLM - UR
To start SLM - UR, start the SLM - UR service and set its service status to Start. The system operator performs this operation.
You can have the SLM - UR service start automatically when the OS starts if you set it up in the OS to start automatically. If SLM - Manager and SLM - UR are installed on the same host and you want to start the service automatically, you must use JP1/Base's startup control to set the SLM - Manager services to start first when the OS starts. For details about using JP1/Base for startup control, see the JP1/Base User's Guide.
If you have not set up the service to start automatically or when you are restarting SLM - UR, you must start SLM - UR by starting the service manually.
- Organization of this subsection
(1) Before you start
-
Verify that your user account belongs to the OS's Administrators group.
Verify that SLM - UR has been set up.
For details about how to set up SLM - UR, see 1.5.2 Setting up SLM - UR.
Verify that SLM - Manager is running.
For details about how to start SLM - Manager, see 3.1.1 Starting SLM - Manager.
(2) Procedure
To start SLM - UR:
From the Windows Start menu, select Administrative Tools, and then Services.
Start the SLM - UR service SLM - User Response Service (service name: JP1_ITSLM_UR_Service).
Once the status of the service is set to Start, SLM - UR has started.
(3) Supplementary information
To restart SLM - UR, perform (2) Procedure after SLM - UR has terminated.
If you restart SLM - UR while monitored services are being monitored, the restarted SLM - UR starts monitoring automatically.
For details about starting monitoring, see 5.3.1 Starting monitoring.
If you have changed the system configuration (including when you restore the system configuration after a change) while SLM - UR is running, you must restart SLM - UR.
(4) Next task
(5) Procedure for terminating SLM - UR
Terminate SLM - UR, for example, when you change the system definitions.
To terminate SLM - UR:
From the Windows Start menu, select Administrative Tools, and then Services.
Stop the SLM - UR service SLM - User Response Service (service name: JP1_ITSLM_UR_Service).
Once the service status is set to Stop, SLM - UR has terminated.