G.3 Changes in 11-00
- Organization of this subsection
(1) Changes in the manual (3021-3-018-20(E))
-
Windows 10 was added to the list of supported operating systems.
-
The following operating systems are no longer supported:
-
Windows Server 2003
-
Windows Server 2008
-
Windows Vista
-
Windows XP
-
-
The following Internet Explorer products are no longer supported:
-
Windows Internet Explorer 7
-
Internet Explorer 6
-
-
The product name JP1/Integrated Management - Service Support was changed to JP1/Service Support. Accordingly, the following were changed:
-
The menu items displayed by selecting Programs from the Start menu in Windows
-
Product names displayed in windows and messages
In addition, JP1/Integrated Management - Service Support Advanced Edition was integrated into JP1/Service Support.
-
-
Product name JP1/Integrated Management - Navigation Platform was changed to JP1/Navigation Platform.
-
The product name JP1/Integrated Management - TELstaff was changed to JP1/TELstaff.
-
The product name JP1/Integrated Management - Universal CMDB was changed to JP1/Universal CMDB.
-
Linkage with JP1/ITDM2 - Asset Console is now possible.
-
jssitementry command (registers an Item)
-
File of extended Item information entries (optional)
-
Item form definition file (optional)
-
Code mapping file (jp1imss_itementry_codemap.conf)
-
System property file (hptl_jp1_imss_main_setting.properties)
-
-
HP NNMi was added.
-
JP1/Cm2/NNM was deleted.
-
The function for recalling an Item can now be used. For an Item after status transition, this function allows users to resume the Item's status and person in charge before the transition even if they do not have access permission for the status after the transition. In addition, a notification email can now be sent when an Item is recalled. Note that operation log data is now output when an Item is recalled.
-
New process work board window
-
Edit the process work board window
-
Main window (Item list)
-
View Item window
-
Email definition file (jp1imss_mail_setting.conf)
-
-
The function for sending back an Item can now be used. This function allows users to resume the status and person in charge of the Item before the status transition. In addition, a notification email can now be sent when an Item is sent back. Note that operation log data is now output when an Item is sent back.
-
Edit item window
-
Email definition file (jp1imss_mail_setting.conf)
-
-
Process names displayed by JP1/Service Support can now be changed.
-
Edit the process display name window
-
System property file (hptl_jp1_imss_main_setting.properties)
-
-
The progress of an Item can now be displayed.
-
Show progress window
-
Status management window
-
-
The maximum number of Items that can be displayed in one page of the List of item search results window can now be specified to search for an Item in the following windows: Specify search conditions - Item-common element window and Specify item search conditions window. If the search results exceed the maximum number of Items that can be displayed in one page of the List of item search results window, users can now turn pages.
-
Specify search conditions - Item-common element window
-
Specify item search conditions window
-
List of item search results window
-
System property file (hptl_jp1_imss_main_setting.properties)
-
-
Initial persons in charge of status can now be set. When the status is changed in the New item window or Edit item window, the initial person in charge is now automatically set for Person in charge. If the initial person in charge of status is not set and only one user or one role can be selected as the person in charge, that user or role is now set for Person in charge. Note that status permissions including the initial person in charge of status were added.
-
New item window
-
Edit item window
-
Edit permissions window
-
jssaclexport command (exports access-permission information)
-
jssaclimport command (imports access-permission information)
-
Access privileges input file (optional)
-
-
When an Item is registered via email, operation mode can now be specified in order to register the Item as an attached file, and to register elements that specify information about the Item.
-
Email definition file (jp1imss_mail_setting.conf)
-
-
In the List of batch operation results window, the results of sending emails can now be checked when Items are closed.
-
POP before SMTP and SMTP-AUTH (PLAIN and LOGIN) were added as user authentication methods that can be used when sending email. The user ID and password for user authentication are now set in the email definition file by using a command to set up authentication users.
-
jssauthusersetup command (authentication-user setting)
-
Email definition file (jp1imss_mail_setting.conf)
-
User log definition file (jp1authusersetup.conf)
-
-
Main-service logs made public to users can now be output.
-
Settings file for main-service logs made public to users (hptl_jp1_imss_main_log.properties)
-
-
When setting up JP1/Service Support, it is no longer necessary to set the client environment variable group.
-
User dump output setting was added as a setting provided for failures.
-
Dr. Watson log data was deleted from the data that can be collected by the jss_log.bat command (collects data). JP1/Service Support product information was added.
-
Operation history was added as an entry of an Item information CSV file that is output by the command to export extended Item information or that is input by the command for importing extended Item information.
-
jssitemexportEx command (exports extended Item information)
-
jssitemimportEx command (imports extended Item information)
-
CSV column name mapping file (jp1imss_itemcsv_columnmap.conf)
-
File of extended Item information entries (optional)
-
-
The category and specification order in the system property file (hptl_jp1_imss_main_setting.properties) were changed.
-
Users can now specify whether to display a failure message (in a window) if an attempt to send an email fails.
-
Email definition file (jp1imss_mail_setting.conf)
-
-
The following messages were added:
KNAB05017-W, KNAB05059-I, KNAB15027-W, KNAB15061-W, KNAB15072-W, KNAB15103-I to KNAB15115-I, KNAB15117-E to KNAB15119-E, KNAB15121-E to KNAB15126-E, KNAB16005-I to KNAB16006-I, KNAB22124-W, KNAB24110-E, KNAB24234-E, KNAB26224-E to KNAB26226-E, KNAB28037-W to KNAB28040-E, KNAB28117-E to KNAB28118-E, KNAB99051-E
-
The following messages were deleted:
KNAB22102-W, KNAB26165-E, KNAB26184-E
-
Operator actions for the following messages were changed:
KNAB11008-E, KNAB11017-E, KNAB12001-E, KNAB24002-E, KNAB24224-E, KNAB26026-E, KNAB26101-E
-
The explanation and operator action for the following message were changed:
KNAB28033-E
-
Descriptions about character encoding were added.
(2) Changes in the manual (3021-3-364-10(E))
-
Windows 10 was added to the list of supported operating systems.
-
The following operating systems are no longer supported:
-
Windows Server 2003
-
Windows Server 2008
-
Windows Vista
-
Windows XP
-
-
The following Internet Explorer products are no longer supported:
-
Windows Internet Explorer 7
-
Internet Explorer 6
-
-
The product name JP1/Integrated Management - Service Support was changed to JP1/Service Support. Accordingly, the following were changed:
-
The menu items displayed by selecting Programs from the Start menu in Windows
-
Product names displayed in windows and messages
In addition, JP1/Integrated Management - Service Support Advanced Edition was integrated into JP1/Service Support.
-
-
JP1/Service Support Starter Edition was added as a JP1/Service Support product.
-
The product name JP1/Integrated Management - TELstaff was changed to JP1/TELstaff.
-
Linkage with JP1/UCMDB is now possible.
-
jssitementry command (registers an Item)
-
Item form definition file (optional)
-
Property file for external references to hardware information (hptl_jp1_imss_ci_link_setting.properties)
-
Code mapping file (jp1imss_itementry_codemap.conf)
-
-
Linkage with JP1/Audit - Manager is now possible.
-
Linkage with JP1/NP is now possible.
-
Property file for JP1 product association setting (hptl_jp1_imss_jp1product_cooperation_setting.properties)
-
System property file (hptl_jp1_imss_main_setting.properties)
-
User management property file (hptl_jp1_imss_usermgr.properties)
-
-
Linkage with JP1/ITDM2 - Asset Console is now possible.
-
jssitementry command (registers an Item)
-
File of extended Item information entries (optional)
-
Item form definition file (optional)
-
Code mapping file (jp1imss_itementry_codemap.conf)
-
System property file (hptl_jp1_imss_main_setting.properties)
-
-
JP/NNMi was added.
-
The function for recalling an Item can now be used. For an Item after status transition, this function allows users to resume the Item's status and person in charge before the transition even if they do not have access permission for the status after the transition. In addition, a notification email can now be sent when an Item is recalled. Note that operation log data is now output when an Item is recalled.
-
New process work board window
-
Edit the process work board window
-
Main window (Item list)
-
View Item window
-
Email definition file (jp1imss_mail_setting.conf)
-
-
The function for sending back an Item can now be used. This function allows users to resume the status and person in charge of the Item before the status transition. In addition, a notification email can now be sent when an Item is sent back. Note that operation log data is now output when an Item is sent back.
-
Edit item window
-
Email definition file (jp1imss_mail_setting.conf)
-
-
Process names displayed by JP1/Service Support can now be changed.
-
Edit the process display name window
-
System property file (hptl_jp1_imss_main_setting.properties)
-
-
The progress of an Item can now be displayed.
-
Show progress window
-
Status management window
-
-
The maximum number of Items that can be displayed in one page of the List of item search results window can now be specified to search for an Item in the following windows: Specify search conditions - Item-common element window or Specify item search conditions window. If the search results exceed the maximum number of Items that can be displayed in one page of the List of item search results window, users can now turn pages.
-
Specify search conditions - Item-common element window
-
Specify item search conditions window
-
List of item search results window
-
System property file (hptl_jp1_imss_main_setting.properties)
-
-
The initial person in charge of status can now be set. When the status is changed in the New item window or Edit item window, the initial person in charge is now automatically set for Person in charge. If the initial person in charge of status is not set and only one user or one role can be selected as the person in charge, that user or role is now set for Person in charge. Note that status permissions including the initial person in charge of status were added.
-
New item window
-
Edit item window
-
Edit permissions window
-
jssaclexport command (exports access-permission information)
-
jssaclimport command (imports access-permission information)
-
Access privileges input file (optional)
-
-
When an Item is registered via email, operation mode can now be specified in order to register the Item as an attached file, and to register elements that specify information about the Item.
-
Email definition file (jp1imss_mail_setting.conf)
-
-
In the List of batch operation results window, the results of sending emails can now be checked when Items are closed.
-
POP before SMTP and SMTP-AUTH (PLAIN and LOGIN) were added as user authentication methods that can be used when sending email. The user ID and password for user authentication are now set in the email definition file by using the command to set up authentication users.
-
jssauthusersetup command (authentication-user setting)
-
Email definition file (jp1imss_mail_setting.conf)
-
User log definition file (jp1authusersetup.conf)
-
-
Main-service logs made public to users can now be output.
-
Settings file for main-service logs made public to users (hptl_jp1_imss_main_log.properties)
-
-
When setting up JP1/Service Support, it is no longer necessary to set the client environment variable group.
-
User dump output setting was added as a settings provided for failures.
-
Dr. Watson log data was deleted from the data that can be collected by the jss_log.bat command (collects data). JP1/Service Support product information was added.
-
Operation history was added as an entry of an Item information CSV file that is output by the command to export extended Item information or that is input by the command for importing extended Item information.
-
jssitemexportEx command (exports extended Item information)
-
jssitemimportEx command (imports extended Item information)
-
CSV column name mapping file (jp1imss_itemcsv_columnmap.conf)
-
File of extended Item information entries (optional)
-
-
The category and specification order in the system property file (hptl_jp1_imss_main_setting.properties) were changed.
-
Users can now specify whether to display a fuilure message (in a window) if an attempt to send an email fails.
-
Email definition file (jp1imss_mail_setting.conf)
-
-
The following messages were added:
KNAB05017-W, KNAB05059-I, KNAB15027-W, KNAB15061-W, KNAB15072-W, KNAB15091-E, KNAB15093-I to KNAB15096-I, KNAB15098-E to KNAB15101-E, KNAB15103-I to KNAB15115-I, KNAB15117-E to KNAB15119-E, KNAB15121-E to KNAB15126-E, KNAB16005-I to KNAB16006-I, KNAB22124-W, KNAB24110-E, KNAB24234-E, KNAB26224-E to KNAB26226-E, KNAB28037-W to KNAB28040-E, KNAB99051-E
-
The following messages were deleted:
KNAB22102-W, KNAB26165-E, KNAB26184-E
-
Operator actions for the following messages were changed:
KNAB11008-E, KNAB11017-E, KNAB12001-E, KNAB24002-E, KNAB24224-E, KNAB26026-E, KNAB26101-E
-
The explanation and operator action for the following message were changed:
KNAB28033-E