KAVB7281-E
An attempt to acquire the definition information of the linked product (product-name) of the host (host-name) has failed. (cause number=reason-number)
The definition information of a linked product could not be acquired because JP1/Base returned an error.
- S:
-
Cancels processing.
- O:
-
Check the system status as directed by the reason number. If the system does not recover normally, use the data collection tool to collect data, and then contact a system administrator.
-
reason-number: 50
Description: The processing limit has been reached.
Action: Wait awhile, and then try the operation again.
-
reason-number: 101
Description: A parameter is invalid.
Action: System error. Use the data collection tool to collect data, and then contact a system administrator.
-
reason-number: 103
Description: The JP1/Base environment is invalid.
Action: Make sure that JP1/Base is installed correctly.
-
reason-number: 105
Description: An error occurred while acquiring linked product information.
Action: Use the data collection tool to collect data, and then contact a system administrator.
-
reason-number: 107
Description: A common definition value is invalid.
Action: Make sure that JP1/Base was set up correctly.
-
reason-number: 108
Description: A logical host name is invalid.
Action: Check the logical host name for errors.
-
reason-number: 114
Description: The network is unreachable, or a connection error occurred during communication.
Action: Check the network configuration and status. Also make sure that JP1/Base is running on the collection-target host.
-
reason-number: 115
Description: An error occurred during transmission processing.
Action: Check the network configuration and status. Also make sure that JP1/Base is running on the collection-target host.
-
reason-number: 116
Description: An error occurred during reception processing.
Action: Check the network configuration and status. Also make sure that JP1/Base is running on the collection-target host.
-
reason-number: 117
Description: A connection was ended.
Action: Check the network configuration and status. Also make sure that JP1/Base is running on the collection-target host.
-
reason-number: 118
Description: The protocol of the received transmission was incorrect.
Action: Temporarily invalid data may have been received. Retry the operation.
-
reason-number: 119
Description: Initialization was not performed.
Action: System error. Use the data collection tool to collect data, and then contact a system administrator.
-
reason-number: 199
Description: An error occurred.
Action: System error. Use the data collection tool to collect data, and then contact a system administrator.
-
Any other reason number
Action: System error. Use the data collection tool to collect data, and then contact a system administrator.
-