1.3.1 Installation procedure (for Windows)
This subsection explains how to install JP1/IM - Manager and JP1/IM - View.
- Organization of this subsection
(1) How to install JP1/IM - Manager
To install:
-
Terminate all programs.
Before you start the installation, terminate all programs.
Stop the JP1/Base services.
If you are performing an upgrade installation, stop the JP1/IM-Manager service. If a JP1/IM - View is connected to the JP1/IM - Manager for which you want to perform an upgrade installation, the login user should log out from the JP1/IM - Manager.
-
Insert the distribution medium in the corresponding drive and start the installation.
Follow the instructions of the installer, which starts automatically.
Select the software you want to install, and then enter the following items:
-
User information
Enter this information only if you are performing a new installation. If you are upgrading from a previous version of JP1/IM - Manager, the information specified for the previous version will be inherited.
-
Installation folders
In an x64 environment, do not install JP1/IM under system-drive\Program Files\ (the Program Files folder without x86). Problems might occur during operation if JP1/IM is in the Program Files folder that contains 64-bit modules.
The installation folders listed below are created when you install JP1/IM - Manager.
Table 1‒1: Folders created during installation Product
Folder that is created#1
Description
JP1/IM - Manager
installation-folder\JP1IMM\#2
Stores JP1/IM - Manager information
installation-folder\JP1Cons\#2
Stores Central Console information
installation-folder\JP1Scope\#2
Stores Central Scope information
#1: The default installation folder is system-drive:\Program Files\Hitachi. In Windows, this value might be different depending on the environment because the value of system-drive:\Program Files is determined by the setting of an OS environment variable at the time of installation.
#2: If a previous version of JP1/IM - Manager was installed in a different folder, that installation folder is inherited and the folders listed above are not created.
Note that the drive that is specified as the installation folder for JP1/IM - Manager must be a fixed disk.
-
-
If you are prompted to restart the system, restart Windows.
Windows must be restarted when Hitachi Network Objectplaza Trace Library (HNTRLib2) is installed. For details, see 1.3.3 Notes about installing (for Windows).
- Important
-
-
If you have upgraded JP1/IM - Manager in an environment in which IM databases have already been set up, use the jimdbupdate command to update the IM databases. If the IM databases have not been updated, a warning message is displayed when JP1/IM - Manager starts.
-
You must specify a fixed disk as the drive for the JP1/IM - Manager installation folder. JP1/IM - Manager and JP1/IM - View must not be installed on a removable disk, network drive, or UNC path.
-
(2) How to install JP1/IM - View
To install:
-
Terminate all programs.
Before you start the installation, terminate all programs.
-
Insert the distribution medium in the corresponding drive and start the installation.
Follow the instructions of the installer, which starts automatically.
Select the software you want to install, and then enter the following items:
-
User information
Enter this information only if you are performing a new installation.
-
Installation folders
In an x64 environment, do not install JP1/IM under system-drive\Program Files\ (the Program Files folder that is not x86 compatible). Problems might occur during operation if JP1/IM is in the Program Files folder that contains 64-bit modules.
The installation folders listed below are created when you install JP1/IM - View.
Table 1‒2: Folders created during installation Product
Folder that is created#1
Description
JP1/IM - View
installation-folder\JP1CoView\#2
Stores JP1/IM - View information
#1: The default installation folder is system-drive:\Program Files\Hitachi. In Windows, this value might be different depending on the environment because the value of system-drive:\Program Files is determined by the setting of an OS environment variable at the time of installation.
#2: If an old version of JP1/IM - View was installed in a different folder, that installation folder is inherited and the default folder listed above is not created.
Note that the drive that is specified as the installation folder for JP1/IM - View must be a fixed disk.
-
-
If you are prompted to restart the system, restart Windows.
Windows must be restarted when Hitachi Network Objectplaza Trace Library (HNTRLib2) is installed. For details, see 1.3.3 Notes about installing (for Windows).
- Important
-
You must specify a fixed disk as the drive for the JP1/IM - View installation folder. JP1/IM - View must not be installed on a removable disk, network drive, or UNC path.
It will not be possible to upgrade JP1/IM - View if it is installed anywhere other than on a fixed disk.
(3) About the types of installation
- Upgrade installation
-
If you are upgrading from an old version, first read the notes about upgrading that you will find in 12.2 Upgrading from a previous version of JP1/IM in the JP1/Integrated Management - Manager Overview and System Design Guide.
- Remote installation using JP1/NETM/DM, JP1/IT Desktop Management 2 and Job Management Partner 1/Software Distribution
-
JP1/IM supports remote installation (software distribution) using JP1/NETM/DM, JP1/IT Desktop Management 2 and Job Management Partner 1/Software Distribution, and you can perform a new installation as well as an upgrade installation of JP1/IM. See JP1/NETM/DM, JP1/IT Desktop Management 2 or Job Management Partner 1/Software Distribution Manual for more information.
Be sure to use a JP1/NETM/DM 09-00 or later packager, a JP1/IT Desktop Management 2 packager or a Job Management Partner 1/Software Distribution 09-00 or later packager to package this software product. JP1/NETM/DM is sold only in Japan.