2.10.2 Procedure for creating a group resource on the primary server
After JP1/IT Desktop Management 2 has been installed, use Windows Server Failover Cluster to create a JP1/IT Desktop Management 2 group and register resources. To register resources:
-
Create a management server group.
Create a group for the management server that is separate from any cluster groups that are already registered in Windows Server Failover Cluster.
-
Register the resources that are necessary for the group you created.
The following table lists the resources you need to register in the group:
Resource type
Resource name
Resources other than JP1/IT Desktop Management 2 service resources
IP address resource
Network name resource
Shared disk (physical disk) resource
JP1/IT Desktop Management 2 service resources (generic services)
JP1_ITDM2_DB Service
JP1_ITDM2_DB Cluster Service
JP1_ITDM2_Web Container#
JP1_ITDM2_Web Server
JP1_ITDM2_Service
JP1_ITDM2_Agent Control
- #: If the OS is Windows Server 2012 or Windows Server 2008, you must create resources from the CLI.
-
If the OS is Windows Server 2012, start PowerShell from the command prompt as a user with administrator permissions, and then execute the following command:
Get-ClusterResource "name-of-JP1_ITDM2_Web Server-service-resource" | Set-ClusterParameter -Name StartupParameters -value ""
If the OS is Windows Server 2008, execute the following command from the command prompt as a user with administrator permissions:
cluster res "name-of-JP1_ITDM2_Web Server-service-resource" /priv StartupParameters=""
-
Set the primary server as the priority server.
-
Bring the resources other than JP1/IT Desktop Management 2 service resources online.
The JP1/IT Desktop Management 2 service resources (generic services) remain offline.
The group resource is created.
For details about how to create a group resource, see the documentation for Windows Server Failover Cluster.
The setting items and the setting values for each resource are as follows.
Settings for resources other than JP1/IT Desktop Management 2 service resources
Resource name |
Setting item |
Setting value |
---|---|---|
|
Failover threshold |
1 (recommended) |
Failover period (in seconds) |
900 (recommended) |
|
Wait timeout (in seconds) |
300 (recommended) |
JP1_ITDM2_DB Service settings
Resource name |
Setting item |
Setting value |
---|---|---|
JP1_ITDM2_DB Service |
Name |
Specify a name. |
Resource type |
Set a generic service. |
|
Group |
Set the group name of a management server. |
|
Possible owner |
Set both the primary and standby servers. |
|
Dependency |
Set the network name resource and the shared disk (physical disk) resource. |
|
Service name |
Set HiRDBEmbeddedEdition_JE1. |
|
Registry copy |
Not specified. |
|
Failover threshold |
0 (fixed) |
|
Failover period (in seconds) |
0 (fixed) |
|
Wait timeout (in seconds) |
300 (recommended) |
JP1_ITDM2_DB Cluster Service settings
Resource name |
Setting item |
Setting value |
---|---|---|
JP1_ITDM2_DB Cluster Service |
Name |
Specify a name. |
Resource type |
Set a generic service. |
|
Group |
Set the group name of a management server. |
|
Possible owner |
Set both the primary and standby servers. |
|
Dependency |
Set a resource for JP1_ITDM2_DB Service. |
|
Service name |
Set HiRDBClusterService_JE1. |
|
Registry copy |
Not specified. |
|
Failover threshold |
1 (recommended) |
|
Failover period (in seconds) |
900 (recommended) |
|
Wait timeout (in seconds) |
300 (recommended) |
JP1_ITDM2_Web Container settings
Resource name |
Setting item |
Setting value |
---|---|---|
JP1_ITDM2_Web Container |
Name |
Specify a name. |
Resource type |
Set a generic service. |
|
Group |
Set the group name of a management server. |
|
Possible owner |
Set both the primary and standby servers. |
|
Dependency |
Set the JP1_ITDM2_DB Cluster Service resource. |
|
Service name |
Set JP1_DTNAVI_WEBCON. |
|
Registry copy |
Not specified. |
|
Failover threshold |
1 (recommended) |
|
Failover period (in seconds) |
900 (recommended) |
|
Wait timeout (in seconds) |
300 (recommended) |
JP1_ITDM2_Web Server settings
Resource name |
Setting item |
Setting value |
---|---|---|
JP1_ITDM2_Web Server |
Name |
Specify a name. |
Resource type |
Set a generic service. |
|
Group |
Set the group name of a management server. |
|
Possible owner |
Set both the primary and standby servers. |
|
Dependency |
Set the network name resource. |
|
Service name |
Set JP1_DTNAVI_WEBSVR. |
|
Registry copy |
Not specified. |
|
Failover threshold |
1 (recommended) |
|
Failover period (in seconds) |
900 (recommended) |
|
Wait timeout (in seconds) |
300 (recommended) |
JP1_ITDM2_Service settings
Resource name |
Setting item |
Setting value |
---|---|---|
JP1_ITDM2_Service |
Name |
Specify a name. |
Resource type |
Set a generic service. |
|
Group |
Set the group name of a management server. |
|
Possible owner |
Set both the primary and standby servers. |
|
Dependency |
Set the JP1_ITDM2_DB Cluster Service resource. |
|
Service name |
Set JP1_DTNAVI_MGRSRV. |
|
Registry copy |
Not specified. |
|
Failover threshold |
1 (recommended) |
|
Failover period (in seconds) |
900 (recommended) |
|
Wait timeout (in seconds) |
300 (recommended) |
JP1_ITDM2_Agent Control settings
Resource name |
Setting item |
Setting value |
---|---|---|
JP1_ITDM2_Agent Control |
Name |
Specify a name. |
Resource type |
Set a generic service. |
|
Group |
Set the group name of a management server. |
|
Possible owner |
Set both the primary and standby servers. |
|
Dependency |
Set the JP1_ITDM2_DB Cluster Service resource. |
|
Service name |
Set JP1_DTNAVI_AGCTRL. |
|
Registry copy |
Not specified. |
|
Failover threshold |
1 (recommended) |
|
Failover period (in seconds) |
900 (recommended) |
|
Wait timeout (in seconds) |
300 (recommended) |