Item accumulation property file (hptl_jp1_imss_main_setting_kpi.properties)
- Organization of this page
Description
This file defines the threshold values for displaying accumulation results for Items in the main window (Item status). It also defines the contents to be displayed in the list of target Items.
The following information is defined. Edit it as required for operation.
-
Unsolved period treated as extended
-
Threshold value for displaying a pending Item with a warning
-
Threshold value for displaying an uncompleted Item with a warning
-
Threshold value for displaying a discussing Item with a warning
-
Threshold value for displaying an extended Item with a warning
-
Threshold value for displaying a top priority Item with a warning
-
Threshold value for displaying a today's deadline Item with a warning
-
Type of Items that are displayed in the list of target Items when you select a system
-
Type of Items that are displayed in the list of target Items when you select a process
You can set the threshold value for displaying an Item with a warning in the main window (Item status) from the New process work board window or the Edit the process work board window.
Format
hptl_jp1_imss_kpi_term_incident=Unsolved period treated as extended (Incident management) hptl_jp1_imss_kpi_term_problem=Unsolved period treated as extended (Problem management) hptl_jp1_imss_kpi_term_change=Unsolved period treated as extended (Change management) hptl_jp1_imss_kpi_term_release=Unsolved period treated as extended (Release management) : hptl_jp1_imss_kpi_system_default_list=Type of Items to be displayed in the list of target Items when you select a system hptl_jp1_imss_kpi_process_default_list=Type of Items to be displayed in the list of target Items when you select a process
Lines starting with a hash mark (#) are treated as comments.
File names
-
hptl_jp1_imss_main_setting_kpi.properties
-
hptl_jp1_imss_main_setting_kpi.properties.model (Model file of the Item accumulation property file)#
- #
-
You can use the model file to reset the contents of the Item accumulation property file. To do so, delete the existing Item accumulation property file, then copy and rename the model file.
Storage folder
IM-SS-path\conf\
When the definition is applied
The definition is applied when you execute the jsscollectdata command.
In addition, the definition is applied to the main window (Item status) after the following services are restarted:
-
JP1/Service Support - Web Service
-
JP1/Service Support
What is described
Do not edit any specification keys other than those that are explained in the following table. Use an equal sign (=) to connect a specification key and its value.
Specification key name |
Description |
Default value |
---|---|---|
hptl_jp1_imss_kpi_term_incident |
Specifies the unsolved period to be treated as extended by incident management (in hours). You can specify a numeric character (integer) from 0 to 876000. Use only half-width numeric characters. |
72 |
hptl_jp1_imss_kpi_term_problem |
Specifies the unsolved period to be treated as extended by problem management (in hours). You can specify a numeric character (integer) from 0 to 876000. Use only half-width numeric characters. |
168 |
hptl_jp1_imss_kpi_term_change |
Specifies the unsolved period to be treated as extended by change management (in hours). You can specify a numeric character (integer) from 0 to 876000. Use only half-width numeric characters. |
480 |
hptl_jp1_imss_kpi_term_release |
Specifies the unsolved period to be treated as extended by release management (in hours). You can specify a numeric character (integer) from 0 to 876000. Use only half-width numeric characters. |
480 |
hptl_jp1_imss_kpi_term_for_XXX |
Specifies the unsolved period when the unsolved period treated as extended is changed in a specific process work board (in hours). You can specify this specification key more than once. By default, this key is commented out (preceded by a hash mark (#)). Therefore, if you want to set this key, remove the comment, or add this key to specify the following setting:
This specification key has precedence over the specifications of other processes. But, if you specify an invalid process work board ID or an invalid value (values that are not described below), the values you specified for the individual processes are applied. You can specify a numeric character (integer) from 0 to 876000. Use only half-width numeric characters. |
-- |
hptl_jp1_imss_kpi_unprocessed_incident |
Uses the number of Items to specify the threshold value for displaying a pending Item with a warning by incident management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
10 |
hptl_jp1_imss_kpi_unprocessed_problem |
Uses the number of Items to specify the threshold value for displaying a pending Item with a warning by problem management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
10 |
hptl_jp1_imss_kpi_unprocessed_change |
Uses the number of Items to specify the threshold value for displaying a pending Item with a warning by change management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half width numeric characters. |
10 |
hptl_jp1_imss_kpi_unprocessed_release |
Uses the number of Items to specify the threshold value for displaying a pending Item with a warning by release management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
10 |
hptl_jp1_imss_kpi_unprocessed_for_XXX |
Uses the number of Items to specify the threshold value when you change the threshold value for displaying a pending Item with a warning by a specific process work board. You can specify this specification key more than once. By default, this key is commented out (preceded by a hash mark (#)). Therefore, if you want to set this key, remove the comment, or add this key to specify the following setting:
This specification key has precedence over the specifications of other processes. But, if you specify an invalid process work board ID or an invalid value (values that are not described below), the values you specified for the individual processes are applied. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
-- |
hptl_jp1_imss_kpi_processing_incident |
Uses the number of Items to specify the threshold value for displaying an uncompleted Item with a warning by incident management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
30 |
hptl_jp1_imss_kpi_processing_problem |
Uses the number of Items to specify the threshold value for displaying an uncompleted Item with a warning by problem management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
30 |
hptl_jp1_imss_kpi_processing_change |
Uses the number of Items to specify the threshold value for displaying an uncompleted Item with a warning by change management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
30 |
hptl_jp1_imss_kpi_processing_release |
Uses the number of Items to specify the threshold value for displaying an uncompleted Item with a warning by release management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
30 |
hptl_jp1_imss_kpi_processing_for_XXX |
Uses the number of Items to specify the threshold value for displaying an uncompleted Item with a warning by a specific process work board. You can specify this specification key more than once. By default, this key is commented out (preceded by a hash mark (#)). Therefore, if you want to set this key, remove the comment, or add this key to specify the following setting:
This specification key has precedence over the specifications of other processes. But, if you specify an invalid process work board ID or an invalid value (values that are not described below), the values you specified for the individual processes are applied. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
-- |
hptl_jp1_imss_kpi_judging_incident |
Uses the number of Items to specify the threshold value for displaying a discussing Item with a warning by incident management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
10 |
hptl_jp1_imss_kpi_judging_problem |
Uses the number of Items to specify the threshold value for displaying a discussing Item with a warning by problem management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
10 |
hptl_jp1_imss_kpi_judging_change |
Uses the number of Items to specify the threshold value for displaying a discussing Item with a warning by change management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
10 |
hptl_jp1_imss_kpi_judging_release |
Uses the number of Items to specify the threshold value for displaying a discussing Item with a warning by release management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
10 |
hptl_jp1_imss_kpi_judging_for_XXX |
Uses the number of Items to change the threshold value for displaying a discussing Item with a warning by a specific process work board. You can specify this specification key more than once. By default, this key is commented out (preceded by a hash mark (#)). Therefore, if you want to set this key, remove the comment, or add this key to specify the following setting:
This specification key has precedence over the specifications of other processes. But, if you specify an invalid process work board ID or an invalid value (values that are not described below), the values you specified for the individual processes are applied. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
-- |
hptl_jp1_imss_kpi_longterm_incident |
Uses the number of Items to specify the threshold value for displaying an extended Item with a warning by incident management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
10 |
hptl_jp1_imss_kpi_longterm_problem |
Uses the number of Items to specify the threshold value for displaying an extended Item with a warning by problem management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
10 |
hptl_jp1_imss_kpi_longterm_change |
Uses the number of Items to specify the threshold value for displaying an extended Item with a warning by change management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
10 |
hptl_jp1_imss_kpi_longterm_release |
Uses the number of Items to specify the threshold value for displaying an extended Item with a warning by release management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
10 |
hptl_jp1_imss_kpi_longterm_for_XXX |
Uses the number of Items to specify the threshold value when you change the threshold value for displaying an extended Item with a warning by a specific process work board. You can specify this specification key more than once. By default, this key is commented out (preceded by a hash mark (#)). Therefore, if you want to set this key, remove the comment, or add this key to specify the following setting:
This specification key has precedence over the specifications of other processes. But, if you specify an invalid process work board ID or an invalid value (values that are not described below), the values you specified for the individual processes are applied. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
-- |
hptl_jp1_imss_kpi_priority_incident |
Uses the number of Items to specify the threshold value for displaying a top priority Item with a warning by incident management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
10 |
hptl_jp1_imss_kpi_priority_problem |
Uses the number of Items to specify the threshold value for displaying a top priority Item with a warning by problem management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
10 |
hptl_jp1_imss_kpi_priority_change |
Uses the number of Items to specify the threshold value for displaying a top priority Item with a warning by change management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
10 |
hptl_jp1_imss_kpi_priority_release |
Uses the number of Items to specify the threshold value for displaying a top priority Item with a warning by release management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
10 |
hptl_jp1_imss_kpi_priority_for_XXX |
Uses the number of Items to specify the threshold value when you change the threshold value for displaying a top priority Item with a warning by a specific process work board. You can specify this specification key more than once. By default, this key is commented out (preceded by a hash mark (#)). Therefore, if you want to set this key, remove the comment, or add this key to specify the following setting:
This specification key has precedence over the specifications of other processes. But, if you specify an invalid process work board ID or an invalid value (values that are not described below), the values you specified for the individual processes are applied. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
-- |
hptl_jp1_imss_kpi_today_incident |
Uses the number of Items to specify the threshold value for displaying a today's deadline Item with a warning by incident management. You can specify a numeric character (integer) from 0 to 2147483647.Use only half-width numeric characters. |
10 |
hptl_jp1_imss_kpi_today_problem |
Uses the number of Items to specify the threshold value for displaying a today's deadline Item with a warning by problem management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
10 |
hptl_jp1_imss_kpi_today_change |
Uses the number of Items to specify the threshold value for displaying a today's deadline Item with a warning by change management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
10 |
hptl_jp1_imss_kpi_today_release |
Uses the number of Items to specify the threshold for displaying today's deadline Item with a warning by release management. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
10 |
hptl_jp1_imss_kpi_today_for_XXX |
Uses the number of Items to specify the threshold value when you change the threshold value for displaying a today's deadline Item with a warning by a specific process work board. You can specify this specification key more than once. By default, this key is commented out (preceded by a hash mark (#)). Therefore, if you want to set this key, remove the comment, or add this key to specify the following setting:
This specification key has precedence over the specifications of other processes. But, if you specify an invalid process work board ID or an invalid value (values that are not described below), the values you specified for the individual processes are applied. You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters. |
-- |
hptl_jp1_imss_kpi_system_default_list |
Specifies the type of Items to be displayed in the list of target Items when you display the Item status from the system perspective in Check status of the main window (Item status). Note that the Items of the target system that is displayed at the top in Check status are displayed. The following are specifiable values:
|
priority |
hptl_jp1_imss_kpi_process_default_list |
Specifies the type of Items to be displayed in the list of target Items when you display Item status from the process perspective in Check status of the main window (Item status). Note that the Items subject to incident management are displayed. The following are specifiable values:
|
priority |
Note
-
If you change the definitions of the Item accumulation property file, execute the jsscollectdata command to create accumulation data based on the new definitions.
-
The Item accumulation property file (hptl_jp1_imss_main_setting_kpi.properties) must be created or edited with a character encoding that is compatible with the system locale of the machine on which JP1/IM - Service Support is installed. You can use one of the following character encodings:
-
In a Japanese environment: ISO-8859-1
-
In an English environment: ISO-8859-1
-
In a Chinese environment: ISO-8859-1
-