The File System Free(L) alarm monitors the unused area (MB) in the local file system. If there is little unused area, disk space is insufficient.

Reference note

To monitor a specific file system, copy this alarm to create an alarm by changing the condition expression in the File System field to File System = mount-point-of-monitored-file-system.

PFM - Web Console alarm property		Settings
Item	Detailed item
Main Information	Product	UNIX
	Alarm message	Disk Space(%CVS1) = %CVS2 MB
	Enable alarm	Yes
	Monitoring time range	Evaluate regularly
	Evaluate all data	No
	Report alarm when the following damping condition is reached	No
	interval(s)	0
	occurrence(s) during	0
Action	Email	--
	Command	--
	SNMP	Abnormal, Warning, Normal
Alarm Conditions 1	Record	File System Detail - Local (PD_FSL)
	Field	File System
	Abnormal condition	File System <> dummy#1
	Warning condition	File System <> dummy#1
Alarm Conditions 2	Record	File System Detail - Local (PD_FSL)
	Field	Mbytes Free
	Abnormal condition	Mbytes Free < 5120#2
	Warning condition	Mbytes Free < 10240#2

Legend:

--: Setting is always ignored.

#1

Sets the mount point of a file system that will not be monitored. No file system with the name set here in the table exists, so all file systems will become monitoring targets.

#2

Change the value as necessary for the environment.

PFM UNIX Template Alarms [DSK] 09.00

Reports/UNIX/Troubleshooting/Real-Time/Drilldown Only/Local File System Detail