The CPU Per Processor(K) alarm monitors the CPU usage (%) for a processor executed in kernel mode. If the CPU usage continues to be at or above the threshold, there might be a problem with the OS or operation method.

Reference note

To monitor a specific processor, copy this alarm and create an alarm by changing the condition expression in the Processor ID field to Processor ID = identifier-of-monitored-processor.

PFM - Web Console alarm property		Settings
Item	Detailed item
Main Information	Product	UNIX
	Alarm message	Kernel mode CPU usage is %CVS2(%CVS1)
	Enable alarm	Yes
	Monitoring time range	Evaluate regularly
	Evaluate all data	No
	Report alarm when the following damping condition is reached	Yes
	interval(s)	3
	occurrence(s) during	2
Action	Email	--
	Command	--
	SNMP	Abnormal, Warning, Normal
Alarm Conditions 1	Record	CPU - Per Processor Detail (PI_CPUP)
	Field	Processor ID
	Abnormal condition	Processor ID >= 0#
	Warning condition	Processor ID >= 0#
Alarm Conditions 2	Record	CPU - Per Processor Detail (PI_CPUP)
	Field	System %
	Abnormal condition	System % > 75
	Warning condition	System % > 50

Legend:

--: Setting is always ignored.

#

Set the identifier of the processor to be monitored. The value used in the table shows an example of setting a condition value that satisfies the Processor ID field.

PFM UNIX Template Alarms [CPU] 09.00

Reports/UNIX/Troubleshooting/Real-Time/CPU Per Processor Usage