Range of data collected for each virtualized system

Job Management Partner 1 Version 10, Job Management Partner 1/Performance Management - Agent Option for Platform Description, User's Guide and Reference

2.3.21 Range of data collected for each virtualized system

Global zone, non-global zone, and PowerVM, HP Integrity Virtual Machines, VMware/KVM, and Virtage environments

The following table describes the data collected by PFM - Agent for Platform running in a virtualized system in the global zone, non-global zone, PowerVM, HP Integrity Virtual Machines, VMware/KVM, and Virtage environments. For example, when you collect data of the PD record in an environment where PFM - Agent for Platform is running in the shared-IP non-global zone, the Shared-IP Non-Global Zone column indicates This zone only. This means that the data only for the shared-IP non-global zone will be collected. When you collect data of the PI record in this environment, the Shared-IP Non-Global Zone column indicates Entire system, which means that the data for the global zone and non-global zones will be collected.

Table 2-3 Data collected for each virtualized system (global zone, non-global zone, PowerVM, HP Integrity Virtual Machines, VMware/KVM, and Virtage environments)

Record	Global Zone^#1	Non-Global Zone		PowerVM and HP Integrity Virtual Machines	VMware/KVM and Virtage
Record	Global Zone^#1	Shared-IP Non-Global Zone	Exclusive-IP Non-Global Zone	PowerVM and HP Integrity Virtual Machines	VMware/KVM and Virtage
PD	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
PD_APP	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
PD_APP2	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
PD_APPD	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
PD_APS	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
PD_APSI	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
PD_FSL	Entire system	This zone only	This zone only	Local disk information on the logical partition	Local disk information in the guest OS
PD_FSR	Information is collected only for the global zone. Information about a remote file system (NFS) installed in the non-global zone cannot be obtained.	This zone only	This zone only	Remote file system information registered on the logical partition	Remote file system information registered in the guest OS
PD_PDI	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
PD_PDS	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
PD_PGM	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
PD_TERM	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
PD_UPD	Specified value	Specified value	Specified value	Performance data that the user specified on the logical partition	Performance data that the user specified in the guest OS
PD_UPDB	Specified value	Specified value	Specified value	Performance data that the user specified on the logical partition	Performance data that the user specified in the guest OS
PD_USER	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
PI^#2	Entire system	Entire system	Entire system	System values on the logical partition	System values in the guest OS
PI_CPUP	Entire system	Entire system	Entire system	Processor information allocated to the logical partition	Processor information allocated to the guest OS
PI_DEVD	Entire system	Entire system	Entire system	Disk information allocated to the logical partition	Disk information allocated to the guest OS
PI_DEVS	Entire system	Entire system	Entire system	Disk information allocated to the logical partition	Disk information allocated to the guest OS
PI_NIND^#3	Interface information shared by the global zone and all shared-IP non-global zones	--	This zone only	NIC information allocated to the logical partition	NIC information allocated to the guest OS
PI_NINS^#3	Interface information shared by the global zone and all shared-IP non-global zones	--	This zone only	NIC information allocated to the logical partition	NIC information allocated to the guest OS
PI_UPI	Specified value	Specified value	Specified value	Performance data that the user specified on the logical partition	Performance data that the user specified in the guest OS
PI_UPIB	Specified value	Specified value	Specified value	Performance data that the user specified on the logical partition	Performance data that the user specified in the guest OS
PI_WGRP	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
PL_MESS	Specified value	Specified value	Specified value	The file specified in evfile or the Messages File property	The file specified in evfile or the Messages File property

Legend:: --: Not collected

#1: The values of items marked with "Entire system" might differ from the actual values of the entire system.; Therefore, for the "Non - Global Zone" items in the table, use only "This zone only" records.

#2: For the following fields, interface information is collected even in the non-global zone environment:; ICMP Pkts In, ICMP Pkts Out, ICMP6 Pkts In, ICMP6 Pkts Out, IP Pkts In, IP Pkts Out, IP6 Pkts In, IP6 Pkts Out, TCP Pkts In, TCP Pkts Out, Total Pkts, Total Pkts In, Total Pkts Out, UDP Pkts In, UDP Pkts Out; For the following fields, information is not collected in the non-global zone environment:; NFS Server Lookup Ops, NFS Server Ops/sec, NFS Server Read Ops, NFS Server Read Ops/sec, NFS Server Total Bad Ops, NFS Server Total Ops, NFS Server Write Ops, NFS Server Write Ops/sec

#3: Physical interface information is collected. Because the shared-IP non-global zone is a logical zone, no information is collected.

WPAR environment

The following table describes the data collected by PFM - Agent for Platform running in a WPAR environment. For example, when you collect data of the PD record in an environment where PFM - Agent for Platform is running in a system WPAR environment, the System WPAR column indicates System WPAR environment. This means that the data only for the system WPAR environment is collected. When you collect data of the PI record in this environment, the System WPAR column indicates Global environment and system WPAR environment, which means that the data for the global environment and system WPAR environments will be collected.

Table 2-4 Data collected for each virtualized system (WPAR environment)

Record	Field	Global environment	System WPAR
PD	All	Global environment	System WPAR environment
PD_APP	All	Global environment	System WPAR environment
PD_APP2	All	Global environment	System WPAR environment
PD_APPD	All	Global environment	System WPAR environment
PD_APS	All	Global environment	System WPAR environment
PD_APSI	All	Global environment	System WPAR environment
PD_FSL	All	Global environment	System WPAR environment
PD_FSR	All	Global environment	System WPAR environment
PI^#	1-Minute Run Queue Avg, 15-Minute Run Queue Avg, 5-Minute Run Queue Avg, Active CPUs, Alloc Mem %, Alloc Mem Mbytes, Alloc Swap %, Alloc Swap Mbytes, Block Ops, Block Reads, Block Writes, Cache Read %, Cache Write %, Context Switches, CPU %, Faults, Free Mem %, Free Mem Mbytes, Free Swap %, Free Swap Mbytes, Idle %, Kernel CPU %, Logical I/O Ops, Logical Read Mbytes, Logical Reads, Logical Write Mbytes, Logical Writes, Major Faults, Pages In, Pages Out, Physical I/O Ops, Physical Reads, Physical Writes, Run Queue, Swapped-In Pages, Swapped-Out Pages, System Calls, Total Idle Time, Total Kernel-Mode Time, Total Page Scans, Total Physical Mem Mbytes, Total Swap Mbytes, Total User-Mode Time, Total Wait Time, User CPU %, Wait %	Global environment and all WPAR environments	Global environment and system WPAR environment
	ICMP Pkts In, ICMP Pkts Out, ICMP6 Pkts In, ICMP6 Pkts Out, IP Pkts In, IP Pkts Out, IP6 Pkts In, IP6 Pkts Out, NFS Client Lookup Ops, NFS Client Ops/sec, NFS Client Read Ops, NFS Client Read Ops/sec, NFS Client Total Bad Ops, NFS Client Total Ops, NFS Client Write Ops, NFS Client Write Ops/sec, NFS Server Lookup Ops, NFS Server Ops/sec, NFS Server Read Ops, NFS Server Read Ops/sec, NFS Server Total Bad Ops, NFS Server Total Ops, NFS Server Write Ops, NFS Server Write Ops/sec, Processes, Processes Ended, Processes Started, TCP Pkts In, TCP Pkts Out, Total Pkts, Total Pkts In, Total Pkts Out, UDP Pkts In, UDP Pkts Out, Users	Global environment and all WPAR environments	System WPAR environment
	Block Reads/sec, Block Writes/sec, Context Switches/sec, Logical Reads/sec, Logical Writes/sec, Major Faults/sec, Page Scans/sec, Pages In/sec, Pages Out/sec, Swapped-In Pages/sec, Swapped-Out Pages/sec, System Calls/sec, Total Faults/sec	Global environment and all WPAR environments	--
	Boot Time, Interval, Record Time, System Up Time	Global environment	System WPAR environment
	Record Type	Fixed value	Fixed value
	Interrupts, Interrupts/sec, Mem I/O Ops, Minor Faults, Minor Faults/sec, Other Pkts In, Other Pkts Out, Page Reclaims/sec, Page-In Ops, Page-In Ops/sec, Page-Out Ops, Page-Out Ops/sec, Page Ops/sec, Software Lock Faults, Software Lock Faults/sec, Swap-In Ops, Swap-Ins/sec, Swap-Out Ops, Swap-Outs/sec, Total Page Ops, Total Page Reclaims, Total Swaps, Total Swaps/sec, Traps, Traps/sec	--	--
PI_CPUP	CPU %, Context Switches, Idle %, Idle Time, System %, System Calls, System Time, User %, User Time, Wait %, Wait Time	Global environment and all WPAR environments	Global environment and system WPAR environment
	Context Switches/sec, Sys Calls/sec	Global environment and all WPAR environments	--
	Boot Time, Interval, Record Time, Up Time	Global environment	System WPAR environment
	Processor ID, Status, Type	Global environment	Global environment
	Record Type	Fixed value	Fixed value
	Interrupts, Interrupts/sec, Traps, Traps/sec	--	--
PI_DEVD	All	Global environment	--
PI_DEVS	All	Global environment	--
PI_NIND	All	Global environment	System WPAR environment
PL_MESS	All	Global environment	System WPAR environment

Legend:: --: Not collected

#: For the following fields, information is not collected in the system WPAR environment:; NFS Server Lookup Ops, NFS Server Ops/sec, NFS Server Read Ops, NFS Server Read Ops/sec, NFS Server Total Bad Ops, NFS Server Total Ops, NFS Server Write Ops, NFS Server Write Ops/sec

Organization of this subsection: (1) Identifying processes that have the same name in a virtualized system

(1) Identifying processes that have the same name in a virtualized system

In a virtualized system, a host might contain processes that have the same name. The following describes how to identify such processes in the virtualized system.

(a) Zone environment

If processes that have the same name exist in the global and non-global zones, check the value of the Virtual Env ID field to determine the zone from which the process information for the PD and PD_APP records was collected.

PD record

For process information obtained by the PD record, the following table describes the relationship between the property setting and the obtained information.

Table 2-5 When PFM - Agent for Platform is installed in the global zone in an environment in which zones have been created

ALL ZONE Collection for Process property setting	Obtained information
ALL ZONE Collection for Process property setting	Data is collected from:	Virtual Env ID field value
Yes	Global zone and all non-global zones	ID of each zone^#
No	Global zone	0

#: When process information is collected from the global zone, the virtualized environment ID (value of the Virtual Env ID field) is 0. When process information is collected from a non-global zone, the virtualized environment ID (value of the Virtual Env ID field) is the ID assigned to that non-global zone.

Table 2-6 When PFM - Agent for Platform is installed in a non-global zone in an environment in which zones have been created

ALL ZONE Collection for Process property setting	Obtained information
ALL ZONE Collection for Process property setting	Data is collected from:	Virtual Env ID field value
Yes	Non-global zone where PFM - Agent for Platform is installed	Non-global zone ID
No	Non-global zone where PFM - Agent for Platform is installed	Non-global zone ID

Reference note:

The following table describes the relationship between the property setting and obtained information in an environment in which no zones have been created.

Table 2-7 When PFM - Agent for Platform is installed in the global zone in an environment in which no zones have been created

ALL ZONE Collection for Process property setting	Obtained information
ALL ZONE Collection for Process property setting	Data is collected from:	Virtual Env ID field value
Yes	Global zone	0
No	Global zone	0

PD_APP record

For process information obtained by the PD_APP record, the following table describes the relationship between the property setting and the obtained information. Note that for the PD_APP record, you can set the ADD AN APPLICATION MONITORING SETTING FOR VIRTUAL ENVIRONMENT property to restrict the environment from which process information is to be collected.

Table 2-8 When PFM - Agent for Platform is installed in the global zone in an environment in which zones have been created

Property settings		Obtained information
ALL WPAR Collection for Process	ADD AN APPLICATION MONITORING SETTING FOR VIRTUAL ENVIRONMENT	Data is collected from:	Virtual Env ID field value
Yes	Blank	Global zone and all non-global zones	Blank
Yes	0	Global zone	0
Yes	ID of the existing non-global zone	Specified non-global zone environment	ID of the specified non-global zone
Yes	ID of the nonexistent non-global zone	--	ID of the specified non-global zone
No	Blank	Global zone	Blank
No	0	Global zone	0
No	ID of the existing non-global zone	--	ID of the specified non-global zone
No	ID of the nonexistent non-global zone	--	ID of the specified non-global zone

Legend:: --: Neither collected nor displayed in a report. In the ProcessXX Count field, 0 is displayed (where XX is a number between 01 and 15).

Table 2-9 When PFM - Agent for Platform is installed in the non-global zone in an environment in which zones have been created

Property settings		Obtained information
ALL WPAR Collection for Process	ADD AN APPLICATION MONITORING SETTING FOR VIRTUAL ENVIRONMENT	Data is collected from:	Virtual Env ID field value
Yes	Blank	Non-global zone where PFM - Agent for Platform is installed	Blank
Yes	0	--	0
Yes	ID of the non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed	ID of the non-global zone where PFM - Agent for Platform is installed
Yes	ID of the non-global zone where PFM - Agent for Platform is not installed	--	ID of the specified non-global zone
No	Blank	Non-global zone where PFM - Agent for Platform is installed	Blank
No	0	--	0
No	ID of the non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed	ID of the non-global zone where PFM - Agent for Platform is installed
No	ID of the non-global zone where PFM - Agent for Platform is not installed	--	ID of the specified non-global zone

Legend:: --: Not collected. In the ProcessXX Count field, 0 is displayed (where XX is a number between 01 and 15).

Reference note:

The following table describes the relationship between the property settings and obtained information in an environment in which no zones have been created.

Table 2-10 When PFM - Agent for Platform is installed in the global zone in an environment in which no zones have been created

Property settings		Obtained information
ALL WPAR Collection for Process	ADD AN APPLICATION MONITORING SETTING FOR VIRTUAL ENVIRONMENT	Data is collected from:	Virtual Env ID field value
Yes	Blank	Global zone	Blank
Yes	0	Global zone	0
Yes	Value other than 0	--	ID of the specified non-global zone
No	Blank	Global zone	Blank
No	0	Global zone	0
No	Value other than 0	--	ID of the specified non-global zone

Legend:: --: Not collected. In the ProcessXX Count field, 0 is displayed (where XX is a number between 01 and 15).

PD_APPD and PD_APP2 records

For process information obtained by the PD_APPD and PD_APP2 records, the following table describes the relationship between the property setting and the obtained information.

Table 2-11 When PFM - Agent for Platform is installed in the global zone in an environment in which zones have been created

Property settings		Obtained information
ALL ZONE Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value^#2
Yes	Blank	Global zone and all non-global zones	Blank
Yes	0	Global zone	0
Yes	ID of the existing non-global zone	Specified non-global zone environment	ID of the specified non-global zone
Yes	ID of the nonexistent non-global zone	--	ID of the specified non-global zone
No	Blank	Global zone	Blank
No	0	Global zone	0
No	ID of the existing non-global zone	--	ID of the specified non-global zone
No	ID of nonexistent non-global zone	--	ID of the specified non-global zone

Legend:: --: Not collected. For PD_APPD records, 0 is displayed in the Monitoring Count field.

#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtualization environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.

#2: The PD_APPD record has no Virtual Env ID field.

Table 2-12 When PFM - Agent for Platform is installed in a non-global zone in an environment in which zones have been created

Property settings		Obtained information
ALL ZONE Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value^#2
Yes	Blank	Non-global zone where PFM - Agent for Platform is installed	Blank
Yes	0	--	0
Yes	ID of the non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed	ID of the specified non-global zone
Yes	ID of the non-global zone where PFM - Agent for Platform is not installed	--	ID of the specified non-global zone
No	Blank	Non-global zone where PFM - Agent for Platform is installed	Blank
No	0	--	0
No	ID of the non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed	ID of the specified non-global zone
No	ID of the non-global zone where PFM - Agent for Platform is not installed	--	ID of the specified non-global zone

Legend:: --: Not collected. For PD_APPD records, 0 is displayed in the Monitoring Count field.

#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtualization environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.

#2: The PD_APPD record has no Virtual Env ID field.

Reference note:

The following table describes the relationship between the property setting and obtained information in an environment in which no zones have been created.

Table 2-13 When PFM - Agent for Platform is installed in the global zone in an environment in which no zones have been created

Property settings		Obtained information
ALL ZONE Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value^#2
Yes	Blank	Global zone	Blank
Yes	0	Global zone	0
Yes	Value other than 0	--	ID of the specified non-global zone
No	Blank	Global zone	Blank
No	0	Global zone	0
No	Value other than 0	--	ID of the specified non-global zone

Legend:: --: Not collected. For PD_APPD records, 0 is displayed in the Monitoring Count field.

#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtualization environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.

#2: The PD_APPD record has no Virtual Env ID field.

PD_APSI record

For process information obtained by the PD_APSI record, the following table describes the relationship between the property setting and the obtained information.

Table 2-14 When PFM - Agent for Platform is installed in the global zone in an environment in which zones have been created

Property settings		Obtained information
ALL ZONE Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value
Yes	Blank	Global zone and all non-global zones	ID of that zone^#2
Yes	0	Global zone	0
Yes	ID of the existing non-global zone	Specified non-global zone environment	ID of the specified non-global zone
Yes	ID of the nonexistent non-global zone	--^#3	--
No	Blank	Global zone	0
No	0	Global zone	0
No	ID of the existing non-global zone	--^#3	--
No	ID of the nonexistent non-global zone	--^#3	--

Legend:: --: Not collected.

#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtualization environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.

#2: When process information is collected from the global zone, the virtualized environment ID (value of the Virtual Env ID field) is 0. When process information is collected from a non-global zone, the virtualized environment ID (value of the Virtual Env ID field) is the ID assigned to that non-global zone.

#3: Not displayed in a report.

Table 2-15 When PFM - Agent for Platform is installed in the non-global zone in an environment in which zones have been created

Property settings		Obtained information
ALL ZONE Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value
Yes	Blank	Non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed
Yes	0	--^#2	--
Yes	ID of the non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed
Yes	ID of the non-global zone where PFM - Agent for Platform is not installed	--^#2	--
No	Blank	Non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed
No	0	--^#2	--
No	ID of the non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed
No	ID of the non-global zone where PFM - Agent for Platform is not installed	--^#2	--

Legend:: --: Not collected.

#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtualization environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.

#2: Not displayed in a report.

Reference note:

The following table describes the relationship between the property setting and obtained information in an environment in which no zones have been created.

Table 2-16 When PFM - Agent for Platform is installed in the global zone in an environment in which no zones have been created

Property settings		Obtained information
ALL ZONE Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value
Yes	Blank	Global zone	0
Yes	0	Global zone	0
Yes	Value other than 0	--^#2	--
No	Blank	Global zone	0
No	0	Global zone	0
No	Value other than 0	--^#2	--

Legend:: --: Not collected.

#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtualization environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.

#2: Not displayed in a report.

PD_APS record

For process information obtained by the PD_APS record, the following table describes the relationship between the property setting and the obtained information.

Table 2-17 When PFM - Agent for Platform is installed in the global zone in an environment in which zones have been created

ALL ZONE Collection for Process setting	Obtained information
ALL ZONE Collection for Process setting	Data is collected from:	Virtual Env ID field value
Yes	Global zone and all non-global zones	ID of that zone^#
No	Global zone	0

#: When process information is collected from the global zone, the virtualized environment ID (value of the Virtual Env ID field) is 0. When process information is collected from a non-global zone, the virtualized environment ID (value of the Virtual Env ID field) is the ID assigned to that non-global zone.

Table 2-18 When PFM - Agent for Platform is installed in the non-global zone in an environment in which zones have been created

ALL ZONE Collection for Process property setting	Obtained information
ALL ZONE Collection for Process property setting	Data is collected from:	Virtual Env ID field value
Yes	Non-global zone where PFM - Agent for Platform is installed	Non-global zone ID
No	Non-global zone where PFM - Agent for Platform is installed	Non-global zone ID

Reference note:

The following table describes the relationship between the property setting and obtained information in an environment in which no zones have been created.

Table 2-19 When PFM - Agent for Platform is installed in the global zone in an environment in which no zones have been created

ALL ZONE Collection for Process property setting	Obtained information
ALL ZONE Collection for Process property setting	Data is collected from:	Virtual Env ID field value
Yes	Global zone	0
No	Global zone	0

(b) WPAR environment

If processes that have the same name exist in the global environment and WPAR environment, check the value of the Virtual Env ID field to determine the environment from which the process information for the PD and PD_APP records was collected.

PD record

For process information obtained by the PD record, the following table describes the relationship between the property setting and the obtained information.

Table 2-20 When PFM - Agent for Platform is installed in the global environment in an environment in which a system WPAR has been created

ALL WPAR Collection for Process property setting	Obtained information
ALL WPAR Collection for Process property setting	Data is collected from:	Virtual Env ID field value
Yes	Global environment and all WPAR environments	ID of each WPAR^#
No	Global environment	0

#: When process information is collected from the global environment, the virtualized environment ID (value of the Virtual Env ID field) is 0. When process information is collected from a WPAR environment, the virtualized environment ID (value of the Virtual Env ID field) is the ID assigned to that WPAR environment.

Table 2-21 When PFM - Agent for Platform is installed in a system WPAR environment in an environment in which a system WPAR has been created

ALL WPAR Collection for Process property setting	Obtained information
ALL WPAR Collection for Process property setting	Data is collected from:	Virtual Env ID field value
Yes	System WPAR environment in which PFM - Agent for Platform is installed	0
No	System WPAR environment in which PFM - Agent for Platform is installed	0

Reference note:

The following table describes the relationship between the property setting and obtained information in an environment in which no system WPAR has been created.

Table 2-22 When PFM - Agent for Platform is installed in the global environment in an environment in which no system WPAR has been created

ALL WPAR Collection for Process property setting	Obtained information
ALL WPAR Collection for Process property setting	Data is collected from:	Virtual Env ID field value
Yes	Global environment	0
No	Global environment	0

PD_APP record

Table 2-23 When PFM - Agent for Platform is installed in the global environment in an environment in which a system WPAR has been created

Property settings		Obtained information
ALL WPAR Collection for Process	ADD AN APPLICATION MONITORING SETTING FOR VIRTUAL ENVIRONMENT	Data is collected from:	Virtual Env ID field value
Yes	Blank	Global environment and all WPAR environments	Blank
Yes	0	Global environment	0
Yes	ID of the existing WPAR	Specified WPAR environment	ID of the specified WPAR
Yes	ID of the non-existing WPAR	--	ID of the specified WPAR
No	Blank	Global environment	Blank
No	0	Global environment	0
No	ID of the existing WPAR	--	ID of the specified WPAR
No	ID of the non-existing WPAR	--	ID of the specified WPAR

Legend:: --: Not collected. In the ProcessXX Count field, 0 is displayed (where XX is a number between 01 and 15).

Table 2-24 When PFM - Agent for Platform is installed in a system WPAR environment in an environment in which a system WPAR has been created

Property settings		Obtained information
ALL WPAR Collection for Process	ADD AN APPLICATION MONITORING SETTING FOR VIRTUAL ENVIRONMENT	Data is collected from:	Virtual Env ID field value
Yes	Blank	System WPAR environment in which PFM - Agent for Platform is installed	Blank
Yes	0	System WPAR environment in which PFM - Agent for Platform is installed	0
Yes	Value other than 0	--	ID of the specified WPAR
No	Blank	System WPAR environment in which PFM - Agent for Platform is installed	Blank
No	0	System WPAR environment in which PFM - Agent for Platform is installed	0
No	Value other than 0	--	ID of the specified WPAR

Legend:: --: Not collected. In the ProcessXX Count field, 0 is displayed (where XX is a number between 01 and 15).

Reference note:

The following table describes the relationship between the property settings and obtained information in an environment in which no system WPAR has been created.

Table 2-25 When PFM - Agent for Platform is installed in a global environment in an environment in which no system WPAR has been created

Property settings		Obtained information
ALL WPAR Collection for Process	ADD AN APPLICATION MONITORING SETTING FOR VIRTUAL ENVIRONMENT	Data is collected from:	Virtual Env ID field value
Yes	Blank	Global environment	Blank
Yes	0	Global environment	0
Yes	Value other than 0	--	ID of the specified WPAR
No	Blank	Global environment	Blank
No	0	Global environment	0
No	Value other than 0	--	ID of the specified WPAR

Legend:: --: Not collected. In the ProcessXX Count field, 0 is displayed (where XX is a number between 01 and 15).

PD_APPD and PD_APP2 records

For process information obtained by the PD_APPD and PD_APP2 records, the following table describes the relationship between the property setting and the obtained information.

Table 2-26 When PFM - Agent for Platform is installed in the global environment in an environment in which a system WPAR has been created

Property settings		Obtained information
ALL WPAR Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value^#2
Yes	Blank	Global environment and all WPAR environments	Blank
Yes	0	Global environment	0
Yes	ID of the existing WPAR	Specified WPAR environment	ID of the specified WPAR
Yes	ID of the non-existing WPAR	--	ID of the specified WPAR
No	Blank	Global environment	Blank
No	0	Global environment	0
No	ID of the existing WPAR	--	ID of the specified WPAR
No	ID of the non-existing WPAR	--	ID of the specified WPAR

Legend:: --: Not collected. For PD_APPD records, 0 is displayed in the Monitoring Count field.

#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtualization environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.

#2: The PD_APPD record has no Virtual Env ID field.

Table 2-27 When PFM - Agent for Platform is installed in a system WPAR environment in an environment in which a system WPAR has been created

Property settings		Obtained information
ALL WPAR Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value^#2
Yes	Blank	System WPAR environment in which PFM - Agent for Platform is installed	Blank
Yes	0	System WPAR environment in which PFM - Agent for Platform is installed	0
Yes	Value other than 0	--	ID of the specified WPAR
No	Blank	System WPAR environment n which PFM - Agent for Platform is installed	Blank
No	0	System WPAR environment n which PFM - Agent for Platform is installed	0
No	Value other than 0	--	ID of the specified WPAR

Legend:: --: Not collected. For PD_APPD records, 0 is displayed in the Monitoring Count field.

#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtualization environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.

#2: The PD_APPD record has no Virtual Env ID field.

Reference note:

The following table describes the relationship between the property setting and obtained information in an environment in which no system WPAR has been created.

Table 2-28 When PFM - Agent for Platform is installed in the global environment in an environment in which no system WPAR has been created

Property settings		Obtained information
ALL WPAR Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value^#2
Yes	Blank	Global environment	Blank
Yes	0	Global environment	0
Yes	Value other than 0	--	ID of the specified WPAR
No	Blank	Global environment	Blank
No	0	Global environment	0
No	Value other than 0	--	ID of the specified WPAR

Legend:: --: Not collected. For PD_APPD records, 0 is displayed in the Monitoring Count field.

#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtualization environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.

#2: The PD_APPD record has no Virtual Env ID field.

PD_APSI record

For process information obtained by the PD_APSI record, the following table describes the relationship between the property setting and the obtained information.

Table 2-29 When PFM - Agent for Platform is installed in the global environment in an environment in which a system WPAR has been created

Property settings		Obtained information
ALL WPAR Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value
Yes	Blank	Global environment and all WPAR environments	ID of the specified WPAR^#2
Yes	0	Global environment	0
Yes	ID of the existing WPAR	Specified WPAR environment	ID of the specified WPAR
Yes	ID of the non-existing WPAR	--^#3	--
No	Blank	Global environment	0
No	0	Global environment	0
No	ID of the existing WPAR	--^#3	--
No	ID of the non-existing WPAR	--^#3	--

Legend:: --: Not collected.

#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtualization environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.

#2: When process information is collected from the global zone, the virtualized environment ID (value of the Virtual Env ID field) is 0. When process information is collected in a WPAR environment, the virtualized environment ID (value of the Virtual Env ID field) is the ID assigned to the WPAR environment.

#3: Not displayed in a report.

Table 2-30 When PFM - Agent for Platform is installed in a system WPAR environment in an environment in which a system WPAR has been created

Property settings		Obtained information
ALL WPAR Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value
Yes	Blank	System WPAR environment where PFM - Agent for Platform is installed	0
Yes	0	System WPAR environment where PFM - Agent for Platform is installed	0
Yes	Value other than 0	--^#2	--
No	Blank	System WPAR environment where PFM - Agent for Platform is installed	0
No	0	System WPAR environment where PFM - Agent for Platform is installed	0
No	Value other than 0	--^#2	--

Legend:: --: Not collected.

#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtualization environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.

#2: Not displayed in a report.

Reference note:

The following table describes the relationship between the property setting and the obtained information in an environment in which no system WPAR has been created.

Table 2-31 When PFM - Agent for Platform is installed in the global environment in an environment in which no system WPAR has been created

Property settings		Obtained information
ALL WPAR Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value
Yes	Blank	Global environment	0
Yes	0	Global environment	0
Yes	Value other than 0	--^#2	--
No	Blank	Global environment	0
No	0	Global environment	0
No	Value other than 0	--^#2	--

Legend:: --: Not collected.

#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtualization environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.

#2: Not displayed in a report.

PD_APS record

For process information obtained by the PD_APS record, the following table describes the relationship between the property setting and the obtained information.

Table 2-32 When PFM - Agent for Platform is installed in the global environment in an environment in which a System WPAR has been created

ALL ZONE Collection for Process setting	Obtained information
ALL ZONE Collection for Process setting	Data is collected from:	Virtual Env ID field value
Yes	Global environment and all WPAR environments	ID of the specified WPAR^#
No	Global environment	0

#: When process information is collected from the global zone, the virtualized environment ID (value of the Virtual Env ID field) is 0. When process information is collected in a WPAR environment, the virtualized environment ID (value of the Virtual Env ID field) is the ID assigned to the WPAR environment.

Table 2-33 When PFM - Agent for Platform is installed in a system WPAR environment in an environment in which a system WPAR has been created

ALL ZONE Collection for Process setting	Obtained information
ALL ZONE Collection for Process setting	Data is collected from:	Virtual Env ID field value
Yes	System WPAR environment where PFM - Agent for Platform is installed	0
No	System WPAR environment where PFM - Agent for Platform is installed	0

Reference note:

The following table describes the relationship between the property setting and the obtained information in an environment in which no system WPAR has been created.

Table 2-34 When PFM - Agent for Platform is installed in the global environment in an environment in which no system WPAR has been created

ALL ZONE Collection for Process setting	Obtained information
ALL ZONE Collection for Process setting	Data is collected from:	Virtual Env ID field value
Yes	Global environment	0
No	Global environment	0