The NBT Overview (PI_NBT) record stores the performance data per unit time on the rate of data transfer that is made via a single NBT connection that connects the local computer to a remote computer.

This is a multi-instance record.

Notes:

If a record for the Instance (INSTANCE) field is newly created during a collection interval, the fields listed below displays 0 because their values are computed from the information collected during the previous interval.

Bytes Rcvd/sec

Bytes Sent/sec

Bytes Total/sec

Item	Default value	Modifiable
Collection Interval	60	Yes
Collection Offset#	0	Yes
Log	No	Yes
LOGIF	Blank	Yes

#

A value between 0 and 32,767 seconds can be specified (a value within the range specified for Collection Interval). Use this item to distribute the collection load, because executing data collection all at once results in concentration of the processing workload. Note that the data collection duration to be recorded is the same as the Collection Interval, regardless of the value specified for Collection Offset.

PI_NBT_INSTANCE

None

• Fixed portion: 681 bytes
• Variable portion: 308 bytes

PFM-View name (PFM - Manager name name)	Description	Smry	Format	Delta	Not sprtd on	Data source
Bytes Rcvd/sec (BYTES_RECEIVED_PER_SEC)	Rate at which the local computer received data via the NBT connection to a remote computer (bytes/second).	AVG	float	No	--	--
Bytes Sent/sec (BYTES_SENT_PER_SEC)	Rate at which the local computer sent data via the NBT connection to a remote computer (bytes/second).	AVG	float	No	--	--
Bytes Total/sec (BYTES_TOTAL_PER_SEC)	Rate at which the local computer sent/received data via the NBT connection to a remote computer (bytes/second).	AVG	float	No	--	--
Instance (INSTANCE)	Remote connection name. Shown as a NetBIOS name. If a period (.) is added to the 16th byte, it indicates that NBT connection was made by a remote computer.	COPY	string (256)	No	--	--
Interval (INTERVAL)	Collection interval during which the record was stored (seconds). For a real-time report, the first value is 5. If records are summarized into a historical report, the last stored value is displayed.	COPY	ulong	No	--	RECORD_TIME (T1) - RECORD_TIME (T0)
Interval2 (INTERVAL2)	Collection interval during which the record was stored (seconds). For a real-time report, the first value is 5. If records are summarized into a historical report, the total of the summarized records is displayed.	ADD	ulong	No	--	RECORD_TIME (T1) - RECORD_TIME (T0)
Record Time (RECORD_TIME)	Time at which the record was created.	COPY	time_t	No	--	--
Record Type (INPUT_RECORD_TYPE)	Record name. Always NBT.	COPY	char (8)	No	--	--

Legend:

Smry: Summary

Not sprtd on: Not supported on