VM CPU Insufficient
- Organization of this page
Overview
The VM CPU Insufficient alarm monitors the following item:
-
For VMware
CPU insufficiency (%) on a virtual machine
-
For Hyper-V and KVM
This alarm is not available because the Insufficient % field is not supported.
This value approaches 0% if sufficient CPU resources are allocated to the virtual machine. To monitor a specific virtual machine, copy this alarm and create an alarm in which "*" is replaced with the name of the virtual machine to be monitored.
Main settings
PFM - Web Console alarm properties |
Setting |
|
---|---|---|
Item |
Detailed item |
|
Main Information |
Product |
RM VirtualMachine |
Message text |
CPU insufficiency rate of %CVS1 is %CVS2% |
|
Enable alarm |
Selected |
|
Evaluate all data |
Not selected |
|
Monitoring time range |
Always monitor |
|
Report alarm when the following damping condition is reached |
Selected |
|
Interval(s) |
3 |
|
occurrence(s) during |
2 |
|
Action |
|
-- |
Command |
-- |
|
SNMP |
Abnormal, Warning, Normal |
|
Conditional expression |
Record |
VM Status (PI_VI) |
Field |
|
|
Abnormal condition |
VM Name = "*" AND Insufficient % >= 30 |
|
Warning condition |
VM Name = "*" AND Insufficient % >= 10 |
Action to be taken
Alarm table
PFM RM VirtualMachine Template Alarms 10.00
Related report
Reports/RM VirtualMachine/Troubleshooting/Recent Past/VM CPU Insufficient