E.2 List of properties of the Remote Monitor Collector service
The following table lists and describes the properties of the Remote Monitor Collector service of PFM - RM for Platform.
Directory name |
Property name |
Description |
|
---|---|---|---|
-- |
First Registration Date |
Displays the first date and time the service was recognized by PFM - Manager. |
|
Last Registration Date |
Displays the most recent date and time the service was recognized by PFM - Manager. |
||
Data Model Version |
Displays the version of the data model. |
||
General |
-- |
Stores information such as host names and directories. You cannot change properties stored in this directory. |
|
Directory |
Displays the name of the current directory where the service is running. |
||
Host Name |
Displays the name of the physical host on which the service runs. |
||
Process ID |
Displays the process ID of the service. |
||
Physical Address |
Displays the IP address and port number of the host where the service is running when the IPv6 communication facility is disabled. |
||
Physical Address (IPv4) |
Displays the IP address (IPv4) of the host where the service is running when the IPv6 communication facility is enabled. |
||
Physical Address (IPv6) |
Displays the IP address (IPv6) of the host where the service is running when the IPv6 communication facility is enabled. |
||
Port Number |
Displays the port number being used by the service that is running when the IPv6 communication facility is enabled. |
||
User Name |
Displays the name of the user that executed the service process. |
||
Time Zone |
Displays the time zone in which the service is being used. |
||
System |
-- |
Stores information about the OS where the service is running. You cannot change properties stored in this directory. |
|
CPU Type |
Displays the CPU type. |
||
Hardware ID |
Displays the hardware ID. |
||
OS Type |
Displays the OS type. |
||
OS Name |
Displays the OS name. |
||
OS Version |
Displays the OS version. |
||
Network Services |
-- |
Stores information about the Stores information Performance Management communication common library. You cannot change properties stored in this directory. |
|
Build Date |
Displays the creation date of the Remote Monitor Collector service. |
||
INI File |
Displays the name of the directory containing the jpcns.ini file. |
||
Network Services |
Service |
-- |
Stores information about the service. You cannot change properties stored in this directory. |
Description |
Displays the host name in the following format: instance-name_host-name |
||
Local Service Name |
Displays the service ID. |
||
Remote Service Name |
Displays the service ID of the Remote Monitor Store service to which the Remote Monitor Collector service is connected. |
||
EP Service Name |
Displays the service ID of the Correlator service on the connection-target PFM - Manager host. |
||
AH Service Name |
Displays the service ID of the Action Handler service on the connection-target PFM - Manager host. |
||
JP1 Event Configurations |
-- |
Specifies the condition for issuing JP1 events. |
|
Services |
Specifies whether Yes or No was selected for the list items in the Remote Monitor Collector service, Remote Monitor Store service, Action Handler service, and Status Server service to issue a JP1 system event for each service. |
||
JP1 Event Send Host |
Specifies the connection-target event server name of JP1/Base. You can only specify an event server that is running on the logical host or physical host of the same machine as that on which the Action Handler service is running. You can specify from 0 to 255 bytes of single-byte alphanumeric characters, including periods (.) or hyphens (-). If you specify a value that is outside the permitted range, it is treated as if the specification was omitted. If the value is omitted, the host where the Action Handler service is running is used as the event-issuing host. If localhost is specified, it is assumed that you mean the physical host. |
||
Monitoring Console Host |
This property specifies the PFM - Web Console host to be started when the service that browses it is automatically executed by the startup of the JP1/IM - Manager monitor. You can specify from 0 to 255 bytes of single-byte alphanumeric characters, including periods (.) or hyphens (-). If you specify a value that is outside the permitted range, it is treated as if the specification was omitted. If the value is omitted, the connection-target PFM - Manager host is assumed. |
||
Monitoring Console Port |
Specifies the port number (http request port number) on which the PFM - Web Console is to be started. You can specify from 1 to 65535. If you specify a value that is outside the permitted range, it is treated as if the specification was omitted. If the value is omitted, 20358 is set. |
||
JP1 Event Configurations |
Alarm |
JP1 Event Mode |
Specifies whether to issue a JP1 system event or a JP1 user event when the alarm status changes.
|
Detail Records |
-- |
Stores the properties of records of the PD record type. The record IDs of the collected records are displayed in boldface type. |
|
Detail Records |
record-ID#1 |
-- |
Stores the properties of a record. |
Description |
Displays a description of the record. You cannot change this property. |
||
Log |
Displays Yes or No, indicating whether records are to be recorded in the Store database of PFM - RM for Platform. No is always displayed here. |
||
Log (ITSLM) |
Displays Yes or No, indicating whether records are to be recorded in the Store database of PFM - RM for Platform from JP1/ITSLM - Manager when JP1/ITSLM - Manager is linked. If JP1/ITSLM - Manager is not linked, this property is fixed at No. You cannot change this property. |
||
Monitoring (ITSLM) |
Displays Yes or No, based on the setting in JP1/ITSLM - Manager, indicating whether records are to be sent to JP1/ITSLM - Manager when JP1/ITSLM - Manager is linked. If JP1/ITSLM - Manager is not linked, this property is fixed at No. You cannot change this property. |
||
Collection Interval#2 |
Specifies the data collection interval. The permitted value is from 0 to 2,147,483,647 seconds in increments of 1. If you specify 0 for the property, 0 seconds is assumed, in which case no data is collected. |
||
Collection Offset#2 |
Specifies the offset value (in seconds) for starting data collection. This value must be in the range from 0 to 32,767 seconds but cannot exceed the value specified for Collection Interval. The data collection logging time does not depend on the Collection Offset value and is the same as the Collection Interval. |
||
Sync Collection With#2 |
Displays the records whose collection is to be synchronized, in record-type,record-ID format. |
||
Over 10 Sec Collection Time |
Displays record collection time only when historical data collection takes priority over real-time report display processing#3. Whether the collection of records takes 10 seconds or longer is displayed as Yes or No.
You cannot change this property. |
||
LOGIF |
Specifies the conditions for storing records in the database. Only records that satisfy the conditions are stored in the database. The system displays the conditional expression (character string) that was created in the LOGIF Expression Editor window, which is displayed by clicking LOGIF in the lower frame of the properties window for the service that is displayed on PFM - Web Console's Services page. |
||
Interval Records |
-- |
Stores the properties of records of the PI record type. The record IDs of the collected records are displayed in boldface type. |
|
Interval Records |
record-ID#1 |
-- |
Stores the properties of a record. |
Description |
Displays a description of the record. You cannot change this property. |
||
Log |
Displays Yes or No indicating whether records are to be recorded in the Store database of PFM - RM for Platform. No is always displayed here. |
||
Log (ITSLM) |
Displays Yes or No, indicating whether records are to be recorded in the Store database of PFM - RM for Platform from JP1/ITSLM - Manager when JP1/ITSLM - Manager is linked. If JP1/ITSLM - Manager is not linked, this property is fixed at No. You cannot change this property. |
||
Monitoring (ITSLM) |
Displays Yes or No, based on the setting in JP1/ITSLM - Manager, indicating whether records are to be sent to JP1/ITSLM - Manager when JP1/ITSLM - Manager is linked. If JP1/ITSLM - Manager is not linked, this property is fixed at No. You cannot change this property. |
||
Collection Interval |
Specifies the data collection interval. The permitted value is from 0 to 2,147,483,647 seconds in increments of 1. If you specify 0 for the property, 0 seconds is assumed, in which case no data is collected. |
||
Collection Offset |
Specifies the offset value (in seconds) for starting data collection. This value must be in the range from 0 to 32,767 seconds but cannot exceed the value specified for Collection Interval. The data collection logging time does not depend on the Collection Offset value and is the same as the Collection Interval. |
||
Over 10 Sec Collection Time |
Displays record collection time only when historical data collection takes priority over real-time report display processing#3. Whether the collection of records takes 10 seconds or longer is displayed as Yes or No.
You cannot change this property. |
||
LOGIF |
Specifies the conditions for storing records in the database. Only records that satisfy the conditions are stored in the database. The system displays the conditional expression (character string) that was created in the LOGIF Expression Editor window, which is displayed by clicking LOGIF in the lower frame of the properties window for the service that is displayed on PFM - Web Console's Services page. |
||
Log Records |
-- |
Stores the properties of records of the PL type. PFM - RM for Platform does not use this property. |
|
Monitoring Targets |
-- |
Stores the properties of the monitored host that is monitored by PFM - RM for Platform. |
|
Monitoring Targets |
monitoring-target-name |
-- |
Displays a description of the monitoring target. As many descriptions are displayed as there are monitoring targets. |
Target Name |
Displays the name of the monitoring target. You cannot change this property. |
||
Target Host |
Displays the name of the monitored host. You cannot change this property. |
||
Health Check Configurations |
Health Check for Target Hosts |
Specifies whether to poll monitored hosts. This property applies to all monitored hosts in an instance. |
|
Restart Configurations |
-- |
Specifies the conditions for automatically restarting the PFM service. |
|
Restart when Abnormal Status |
Specifies whether to automatically restart a service when the Status Server service cannot normally acquire the status of the Action Handler service, Remote Monitor Collector service, and Remote Monitor Store service. |
||
Restart when Single Service Running |
Specifies whether to automatically restart a service when only the Remote Monitor Store service or Remote Monitor Collector service has started. |
||
Restart Configurations |
Remote Monitor Collector |
Auto Restart |
Specifies whether to use the auto restart function on the Remote Monitor Collector service. |
Auto Restart - Interval (Minute) |
Specifies the interval at which to check the operation status of a service when the auto restart function is used. You can specify from 1 to 1,440 minutes in 1-minute increments. |
||
Auto Restart - Repeat Limit |
Specifies the number of continuous retries, as an integer from 1 to 10, when the auto restart function is used. |
||
Scheduled Restart |
Select Yes or No from the list items to indicate whether the scheduled restart function will be used on the Remote Monitor Collector service. |
||
Scheduled Restart - Interval |
Specifies the restart interval, as an integer from 1 to 1000, when the scheduled restart function is used. |
||
Scheduled Restart - Interval Unit |
Select Day, Week, or Month from the item list to indicate the unit for the restart interval when the scheduled restart function is used. |
||
Scheduled Restart - Origin - Year |
Specifies the year when a restart will be executed, as an integer from 1971 to 2035. |
||
Scheduled Restart - Origin - Month |
Specifies the month when a restart will be executed, as an integer from 1 to 12. |
||
Scheduled Restart - Origin - Day |
Specifies the day when a restart will be executed, as an integer from 1 to 31. |
||
Scheduled Restart - Origin - Hour |
Specifies the time (hour) when a restart will be executed, as an integer from 0 to 23. |
||
Scheduled Restart - Origin - Minute |
Specifies the time (minutes) when a restart will be executed, as an integer from 0 to 59. |
||
Remote Monitor Store |
Auto Restart |
Specifies whether to use the auto restart function on the Remote Monitor Store service. |
|
Auto Restart - Interval (Minute) |
Specifies the interval at which to check the operation status of a service when the auto restart function is used. You can specify from 1 to 1,440 minutes in 1-minute increments. |
||
Auto Restart - Repeat Limit |
Specifies the number of continuous retries, as an integer from 1 to 10, when the auto restart function is used. |
||
Scheduled Restart |
Select Yes or No from the item list to indicate whether the scheduled restart function will be used on the Remote Monitor Store service. |
||
Scheduled Restart - Interval |
Specifies the restart interval, as an integer from 1 to 1000, when the scheduled restart function is used. |
||
Scheduled Restart - Interval Unit |
Select Day, Week, or Month from the item list to indicate the unit for the restart interval when the scheduled restart function is used. |
||
Scheduled Restart - Origin - Year |
Specifies the year when a restart will be executed, as an integer from 1971 to 2035. |
||
Scheduled Restart - Origin - Month |
Specifies the month when a restart will be executed, as an integer from 1 to 12. |
||
Scheduled Restart - Origin - Day |
Specifies the day when a restart will be executed, as an integer from 1 to 31. |
||
Scheduled Restart - Origin - Hour |
Specifies the time (hour) when a restart will be executed, as an integer from 0 to 23. |
||
Scheduled Restart - Origin - Minute |
Specifies the time (minutes) when a restart will be executed, as an integer from 0 to 59. |
||
Action Handler |
Auto Restart |
Specifies whether to use the auto restart function on the Action Handler service. |
|
Auto Restart - Interval (Minute) |
Specifies the interval at which to check the operation status of a service when the auto restart function is used. You can specify from 1 to 1,440 minutes in 1-minute increments. |
||
Auto Restart - Repeat Limit |
Specifies the number of continuous retries, as an integer from 1 to 10, when the auto restart function is used. |
||
Scheduled Restart |
Select Yes or No from the item list to indicate whether the scheduled restart function will be used on the Action Handler service. |
||
Scheduled Restart - Interval |
Specifies the restart interval, as an integer from 1 to 1000, when the scheduled restart function is used. |
||
Scheduled Restart - Interval Unit |
Select Day, Week, or Month from the item list to indicate the unit for the restart interval when the scheduled restart function is used. |
||
Scheduled Restart - Origin - Year |
Specifies the year when a restart will be executed, as an integer from 1971 to 2035. |
||
Scheduled Restart - Origin - Month |
Specifies the month when a restart will be executed, as an integer from 1 to 12. |
||
Scheduled Restart - Origin - Day |
Specifies the day when a restart will be executed, as an integer from 1 to 31. |
||
Scheduled Restart - Origin - Hour |
Specifies the time (hour) when a restart will be executed, as an integer from 0 to 23. |
||
Scheduled Restart - Origin - Minute |
Specifies the time (minutes) when a restart will be executed, as an integer from 0 to 59. |
||
ITSLM Connection Configuration |
-- |
Displays information about the JP1/ITSLM - Manager that is linked. |
|
ITSLM Connection Configuration |
ITSLM Connection |
-- |
Displays information about the connection-target JP1/ITSLM - Manager. |
ITSLM Host |
Displays the host name of the connected JP1/ITSLM - Manager. This property is not displayed when JP1/ITSLM - Manager is not connected. |
||
ITSLM Port |
Displays the port number of the connected JP1/ITSLM - Manager. This property is not displayed when JP1/ITSLM - Manager is not connected. |
||
MANAGE ITSLM CONNECTION |
-- |
Specifies whether to terminate the connection to JP1/ITSLM - Manager. |
|
DISCONNECT ITSLM CONNECTION |
Specifies from the item list the host name of the JP1/ITSLM - Manager whose connection is to be terminated. If a blank character is specified from the item list, no action is taken. Only a blank character is displayed in the item list if JP1/ITSLM - Manager is not connected. |
||
Multiple Manager Configuration |
Primary Manager |
Displays the host name of the manager specified as the primary manager for multiple monitoring. You cannot change this property. |
|
Secondary Manager |
Displays the host name of the manager specified as the secondary manager for multiple monitoring. You cannot change this property. |
||
Remote Monitor Configuration |
-- |
Stores the setting properties specific to PFM - RM for Platform. |
|
Remote Monitor Configuration |
Remote Monitor |
-- |
Displays an overview of the Remote Monitor Collector service. |
Product |
Displays 7 as the product ID. |
||
Instance |
Displays the instance name specified in the jpcconf inst setup command. |
||
UseCommonAccount |
Displays the value of UseCommonAccount, which was specified when the instance environment was set up. Not Supported is displayed in environments where common account information is not supported. You cannot change this property. This property is supported only when the PFM - RM host is running Windows. |
||
Interval |
Displays the value of Interval, which was specified when the instance environment was set up. You can change this property. |
||
Std_Category |
Displays the value of StdCategory, which was specified when the instance environment was set up. You can change this property. |
||
Disk_Category |
Displays the value of DiskCategory, which was specified when the instance environment was set up. You can change this property. |
||
Network_Category |
Displays the value of NetworkCategory, which was specified when the instance environment was set up. You can change this property. |
||
Ps_Category |
Displays the value of PsCategory specified when the instance environment was set up. You can change this property. |
||
RMHost_User |
This property is supported only when the PFM - RM host is running Windows. |
||
RMHost_Password |
**** (fixed) is displayed. You cannot change this property. This property is supported only when the PFM - RM host is running Windows. |
||
RMHost_Domain |
This property is supported only when the PFM - RM host is running Windows. |
||
SSH_Client |
Displays the value specified in SSH_Client when the instance environment was set up. You can change this property. This property is supported only when the PFM - RM host is running Windows. You must specify this property when the monitored host is running UNIX. |
||
Perl_Module |
Displays the value specified in Perl_Module when the instance environment was set up. You can change this property. This property is supported only when the PFM - RM host is running Windows. You must specify this property when the monitored host is running UNIX. |
||
Log_Size |
Displays the value of Log_Size, which was specified when the instance environment was set up. You can change this property. |
- Legend:
-
--: Not applicable
- #1
-
The directory name shows the record ID without the database ID. For details about the record ID of each record, see 7. Records.
- #2
-
If Sync Collection With is displayed, Collection Interval and Collection Offset are not displayed.
- #3
-
For details, see the chapter that describes troubleshooting in the Job Management Partner 1/Performance Management User's Guide.
- #4
-
To apply the new values, restart the Remote Monitor Collector service.