Page Faults
- Organization of this page
Overview
The Page Faults alarm monitors the memory load status.
Main settings
|
Alarm properties in PFM - Web Console |
Setting |
|
|---|---|---|
|
Item |
Details |
|
|
Main Information |
Product |
RM Platform |
|
Alarm message |
Page fault is %CVS/sec |
|
|
Enable alarm |
Selected |
|
|
Monitoring time range |
Always monitor |
|
|
Report alarm when the following damping condition is reached |
Selected |
|
|
interval(s) |
3 |
|
|
occurrence(s) during |
2 |
|
|
Action |
|
-- |
|
Command |
-- |
|
|
SNMP |
Abnormal, Warning, Normal |
|
|
Alarm Conditions |
Record |
System Summary (PI) |
|
Field |
Page Fault Counts/sec |
|
|
Abnormal condition |
Page Fault Counts/sec >= 5 |
|
|
Warning condition |
Page Fault Counts/sec >= 4 |
|
- Legend:
-
--: The setting is always ignored.
Alarm table
PFM RM Platform Template Alarms 09.10
Related reports
Reports/RM Platform/Troubleshooting/Real-Time/System Overview
- Note
-
Do not use this alarm when the OS of the monitored host is HP-UX or Linux.