C.1 Performance Management port numbers
This section describes the port numbers that are used by PFM - Manager, PFM - Web Console, and PFM - Base.
For details about the port numbers for the Agent Collector and Remote Monitor Collector service, or Agent Store and Remote Monitor Store service, see the lists of port numbers provided in the appendix of each PFM - Agent or PFM - RM manuals.
- Organization of this subsection
(1) Port numbers used by PFM - Manager
The following table shows the port numbers used by PFM - Manager:
Port number |
Service name |
Parameter |
Use |
---|---|---|---|
20275#1 |
Action Handler |
jp1pcah |
Used to execute actions. |
Automatic#2 |
Agent Collector (health check agent) |
jp1pcagt0 |
Used to bind alarms and acquire realtime reports. |
Automatic#2 |
Agent Store (health check agent) |
jp1pcsto0 |
Used to record performance data and acquire historical reports. |
20273#1 |
Correlator |
jp1pcep |
Used to send the events of each PFM - Agent or PFM - RM to PFM - Manager. |
20271#1 |
Master Manager |
jp1pcmm |
Used when each service communicates with the Master Manager service. |
20272#1 |
Master Store |
jp1pcsto |
Used to record the events of each PFM - Agent or PFM - RM. |
22292#3 |
NNM Object Manager |
jp1pcovsvr |
Used to link with NNM. |
22285 |
Name Server |
jp1pcnsvr |
Used when each service communicates with the Name Server service. |
22350 |
Status Server |
jp1pcstatsvr |
Used to check the service status. |
20274#1 |
Trap Generator |
jp1pctrap |
Used when SNMP traps are sent. |
20276#1 |
View Server |
jp1pcvsvr2 |
Used to send the events and reports of each PFM - Agent or PFM - RM to PFM - Web Console. |
22286 |
View Server (between PFM - Web Console and View Server service) |
jp1pcvsvr |
Used to log in to PFM - Manager and to manipulate PFM - Web Console's GUI. |
View Server (between JP1/ITSLM and PFM - Manager) |
jp1pcvsvr |
Used to set a linkage with PFM - Manager from JP1/ITSLM. |
- #1
-
This is the port number assigned by the system; it is used unless you change the port number to a value you select by executing the jpcconf port define command. If you do not execute the jpcconf port define command, the system automatically assigns an available port number each time a service is restarted.
- #2
-
When the jpcconf port define command is executed, a port number that is not being used at that point is assigned automatically and displayed. Also, if you do not execute the jpcconf port define command, a port number that is not being used by the system is automatically assigned each time the service is restarted.
- #3
-
The port number is used only when the product is installed on Windows Server 2003, or Solaris (SPARC).
(2) Port numbers used by PFM - Web Console
The following table shows the port numbers used by PFM - Web Console:
Port number |
Service name |
Parameter |
Use |
---|---|---|---|
20358 |
Web Service |
N/A |
Used to connect from a Web browser to PFM - Web Console. |
20359 |
Web Console |
N/A |
Used when the Web Service service establishes communication connection with the Web Console service. |
20360 |
Web Console |
N/A |
Used to manage the Web Console service. |
Automatic# |
Web Console |
N/A |
Callback port number (ownPort) used by the PFM - Web Console service |
Automatic# |
Web Console |
N/A |
Callback port number (ownCmdPort) used by the PFM - Web Console command |
- Legend:
-
N/A: Not applicable
- #
-
When PFM - Web Console starts, a port number set in the config.xml file is automatically assigned to PFM - Web Console. If no port number is set in the config.xml file, a port number that is not being used by the system is automatically assigned to PFM - Web Console each time PFM - Web Console is restarted.
(3) Port numbers used by PFM - Base
The following table shows the port numbers used by PFM - Base:
Port number |
Service name |
Parameter |
Use |
---|---|---|---|
20275#1 |
Action Handler |
jp1pcah |
Used to execute actions. |
22292#2 |
NNM Object Manager |
jp1pcovsvr |
Used to link with NNM. |
22350 |
Status Server |
jp1pcstatsvr |
Used to check the service status. |
- #1
-
This is the port number assigned by the system; it is used unless you change the port number to a value you select by executing the jpcconf port define command. If you do not execute the jpcconf port define command, the system automatically assigns an available port number each time a service is restarted.
- #2
-
The port number is used only when the product is installed on Windows Server 2003, Solaris (SPARC), or HP-UX.
(4) About port number information registered in the services file on the PFM - Base host
When you install PFM - Base, register the following port number information in the services file:
-
jp1pcnsvr: 22285/tcp
-
jp1pcstatsvr: 22350/tcp
-
jp1pcovsvr: 22292/tcp#
The port number 22285 above is a port that waits for the NameServer service of the PFM - Manager host and is used for specifying the communication port from the PFM - Base host.
PFM - Base communicates with the NameServer service by using this port information as the destination. Therefore, do not change the setting value except when the port number of the NameServer service is changed. If you change or delete the port number, PFM - Base cannot communicate with NameServer.
- #
-
The port number is used only when PFM - Base is installed on Windows Server 2003, Solaris (SPARC), or HP-UX.