2.3.2 Setting the SNMP trap transmission port number (when performing overwrite installation on version 07-10 or earlier)
If you are performing overwrite installation on SNMP Agent version 07-10 or earlier, and if you have specified a value other than 161/udp for the SNMP reception port, you must specify 162 for the SNMP trap transmission port number (SR_TRAP_TEST_PORT environment variable) after you have installed SNMP Agent.
Use the following procedure to set the SNMP trap transmission port number.
Procedure
-
Add the following two lines in the SnmpMaster file, which is used by the snmpdm process:
SR_TRAP_TEST_PORT=162 export SR_TRAP_TEST_PORT
-
Use the snmpstart command to start SNMP Agent.