8.2 Messages displayed in Event Viewer

The table below lists and describes the messages that can be displayed in Event Viewer.

Table 8‒1: Messages displayed in Event Viewer
Event ID	Type	Category^#19	Description	Notes
`2`	`Error` or `Warning`	`Log` `Error` (`107`) `Log` `Warning` (`109`) `Agent` `Error` (`113`) `Agent` `Warning` (`115`) `Server` `Warning` (`106`) `Client` `Error` (`101`) `Client` `Warning` (`103`)	`System` `function` `error` `occurred.` `Function` `that` `caused` `error:`^#1 `Place` `where` `error` `occurred:`^#2 `Function` `name:`^#3 `Error` `message:`^#4 `Details:`^#5	Error and warning logs in the event of a system call error Action: See Table 8-2.
`3`	`Error`	`Server` `Error` (`104`)	`System` `function` `error` `occurred.` `Connection` `number:`^#6 `Function` `that` `caused` `error:`^#1 `Place` `where` `error` `occurred:`^#2 `Function` `name:`^#3 `Error` `message:`^#4 `User` `name:`^#7 `IP` `address:`^#8 `Details:`^#5	Error log in the event of a system call error
`4`	`Error` or `Warning`	`Server` `Error` (`104`) `Server` `Warning` (`106`)	`System` `call` `error` `occurred.` `Connection` `number:`^#6 `Transmission` `number:`^#9 `Function` `that` `caused` `error:`^#1 `Place` `where` `error` `occurred:`^#2 `Function` `name:`^#3 `Error` `message:`^#4 `User` `name:`^#7 `IP` `address:`^#8 `Local` `file` `name:`^#10 `Details:`^#5	Error and warning logs in the event of a system call error during file transmission Action: See Table 8-3.
`5`	`Error`	`Client` `Error` (`101`) `Log` `Error` (`107`) `Server` `Error` (`104`) `Agent` `Error` (`113`)	`Logic` `error` `occurred.` `Function` `that` `caused` `error:`^#1 `Place` `where` `error` `occurred:`^#2	Error log in the event of a logical error
`6`	`Warning`	`Client` `Warning` (`103`)	`Protocol` `error` `occurred.` `Function` `that` `caused` `error:`^#1 `Place` `where` `error` `occurred:`^#2 `Reply` `message:`^#11 `Connection` `number:`^#6 `Transmission` `number:`^#9 `Log-in` `user` `name:`^#12 `Log-in` `host` `name:`^#13 `Transmission` `type:`^#14 `Local` `file` `name:`^#15 `Remote` `file` `name:`^#16	Error log in the event of a protocol error
`7`	`Error` or `Warning`	`Client` `Error` (`101`) `Client` `Warning` (`103`)	`System` `call` `error` `occurred.` `Function` `that` `caused` `error:`^#1 `Place` `where` `error` `occurred:`^#2 `Function` `name:`^#3 `Error` `message:`^#4 `Connection` `number:`^#6 `Transmission` `number:`^#9 `Log-in` `user` `name:`^#12 `Log-in` `hostname:`^#13 `Transmission` `type:`^#14 `Local` `file` `name:`^#15 `Remote` `file` `name:`^#16 `Details:`^#5	Error log in the event of a system call error Action: See Table 8-4.
`8`	`Error`	`Client` `Error` (`101`)	`Logic` `error` `occurred.` `Function` `that` `caused` `error:`^#1 `Place` `where` `error` `occurred:`^#2 `Connection` `number:`^#6 `Transmission` `number:`^#9 `Log-in` `user` `name:`^#12 `Log-in` `hostname:`^#13 `Transmission` `type:`^#14 `Local` `file` `name:`^#15 `Remote` `file` `name:`^#16	Error log in the event of a logical error
`9`	`Error`	`Log` `Error` (`107`)	`File` `system` `is` `full,` `so` `cannot` `output` `log.` `Delete` `unnecessary` `files.`	Error log when there was not enough disk space to write the log
`10`	`Warning`	`Client` `Warning` (`103`) `Server` `Warning` (`106`)	`File` `system` `is` `full,` `so` `cannot` `output` `trace.` `Delete` `unnecessary` `files.`	Warning log when there was not enough disk space to write the trace log
`11`	`Information`	`Server` `Info` (`105`)	`JP1/File` `Transmission` `Server/FTP` `Server` `service` `started.`	Information log when the server service started
`12`	`Information`	`Server` `Info` (`105`)	`JP1/File` `Transmission` `Server/FTP` `Server` `service` `terminated.`	Information log when the server service stopped
`14`	`Information`	`Client` `Info` (`102`)	`JP1/File` `Transmission` `Server/FTP` `Client` `service` `started.`	Information log when the client service started
`15`	`Information`	`Client` `Info` (`102`)	`JP1/File` `Transmission` `Server/FTP` `Client` `service` `terminated.`	Information log when the client service stopped
`17`	`Warning`	`Client` `Warning` (`103`) `Server` `Warning` (`106`)	`Log` `service` `forcibly` `terminated` `the` `connection.`	Warning log when Log service forcibly terminated the connection
`18`	`Warning`	`Server` `Warning` (`106`)	`Number` `of` `concurrent` `transmissions` `exceeds` `the` `maximum,` `so` `the` `request` `is` `rejected.` `IP` `address` `of` `requestor:`^#8	Warning log when the maximum number of connections was exceeded during server connection
`19`	`Information`	`Log` `Info` (`108`)	`JP1/File` `Transmission` `Server/FTP` `Log` `service` `started.`	Information log when the log service started
`20`	`Information`	`Log` `Info` (`108`)	`JP1/File` `Transmission` `Server/FTP` `Log` `service` `terminated.`	Information log when the log service stopped
`21`	`Error`	`Client` `Error` (`101`) `Server` `Error` (`104`) `Log` `Error` (`107`) `Agent` `Error` (`113`)	`Port` `number` `is` `not` `defined` `in` `the` `Services` `file.[service` `name` `for` `which` `a` `port` `number` `is` `not` `defined]`	Error log when the service started
`24`	`Information`	`Server` `Info` (`105`)	`Transmission` `was` `finished` `normally.` `Connection` `number:`^#6 `Transmission` `number:`^#9 `User` `name:`^#7 `IP` `address:`^#8 `Local` `file` `name:`^#10	Information log when transmission terminated normally
`25`	`Error`	`Server` `Error` (`104`)	`Transmission` `was` `finished` `abnormally.` `Connection` `number:`^#6 `Transmission` `number:`^#9 `User` `name:`^#7 `IP` `address:`^#8 `Local` `file` `name:`^#10	Error log when transmission terminated abnormally
`26`	`Information`	`Client` `Info` (`102`)	`Transmission` `was` `finished` `normally.` `Connection` `number:`^#6 `Transmission` `number:`^#9 `Card` `name:`^#17 `Log-in` `user` `name:`^#12 `Log-in` `hostname` `or` `IP` `address:`^#13 `Local` `file` `name:`^#15 `Remote` `file` `name:`^#16	Information log when transmission terminated normally
`27`	`Error`	`Client` `Error` (`101`)	`Transmission` `was` `finished` `abnormally.` `Connection` `number:`^#6 `Transmission` `number:`^#9 `Card` `name:`^#17 `Log-in` `user` `name:`^#12 `Log-in` `hostname` `or` `IP` `address:`^#13 `Local` `file` `name:`^#15 `Remote` `file` `name:`^#16	Information log when transmission terminated abnormally
`28`	`Information`	`Agent` `Info` (`114`)	`JP1/File` `Transmission` `Server/FTP` `Agent` `service` `started.`	Information log when the Operations-Manager Agent service started
`29`	`Information`	`Agent` `Info` (`114`)	`JP1/File` `Transmission` `Server/FTP` `Agent` `service` `terminated.`	Information log when the Operations-Manager Agent service ended
`30`	`Information`	`Log` `Info` (`108`)	`The` `existing` `log` `information` `file` `(history)` `is` `being` `copied.` `(FTSLOGSAVE)(`^#18`)(Log` `information` `pointer)`	Information log when the log information file was copied
`31`	`Information`	`Log` `Info` (`108`)	`A` `new` `log` `information` `file` `(history)` `will` `now` `be` `created.` `(Log` `information` `pointer)`	Information log when a new log information file was created
`33`	`Information`	`Server` `Info` (`105`)	`Transmission` `was` `started.` `Connection` `number:`^#6 `Transmission` `number:`^#9 `User` `name:`^#7 `IP` `address:`^#8 `Local` `file` `name:`^#10	Information log when transmission started
`34`	`Information`	`Client` `Info` (`102`)	`Transmission` `was` `started.` `Connection` `number:`^#6 `Transmission` `number:`^#9 `Card` `name:`^#17 `Log-in` `user` `name:`^#12 `Log-in` `hostname` `or` `IP` `address:`^#13 `Local` `file` `name:`^#15 `Remote` `file` `name:`^#16	Information log when transmission started
`35`	`Error`	`Client` `Error` (`101`) `Server` `Error` (`104`) `Agent` `Error` (`113`)	`The` `trial` `version` `of` `Job` `Management` `Partner` `1/File` `Transmission` `Server/FTP` `has` `passed` `the` `expiration` `date` `(m/d/y).`	Error when the trial version has expired, but an attempt was made to start a service or receive a message at the port
`37`	`Warning`	`Client` `Warning` (`103`) `Server` `Warning` (`106`)	`An` `error` `occurred` `while` `a` `connection` `number` `or` `transmission` `number` `was` `being` `saved.` `Function` `that` `caused` `error:`^#1 `Place` `where` `error` `occurred:`^#2 `Function` `name:`^#3 `Error` `message:`^#4 `Details:`^#5	Warning log when writing of a connection number or transmission number failed
`38`	`Error`	`Client` `Error` (`101)`	`Logic` `error` `occurred.` `Function` `that` `caused` `error:`^#1 `Place` `where` `error` `occurred:`^#2 `Details:`^#5	Error log in the event of a logical error
`1001`	`Information` `Warning`	`Backup` `Info` (`110`) `Backup` `Warning` (`111`)	`Saved` `JP1/FTP` `settings.`	Information and warning logs when the `ftssave` command was used
`1002`	`Information` or `Warning`	`Backup` `Info` (`110`) `Backup` `Warning` (`111`)	`Recovered` `JP1/FTP` `settings.`	Error log when the `ftsload` command was used
`1003`	`Error`	`Backup` `Error` (`112`)	`Error` `occurred` `when` `saving` `JP1/FTP` `settings.`^#4	Error log when the `ftssave` command was used
`1004`	`Error`	`Backup` `Error` (`112`)	`Error` `occurred` `when` `recovering` `JP1/FTP` `settings.`^#4	Error log when the `ftsload` command was used
`1006`	`Error`	`Backup` `Error` (`112`)	`Incorrect` `parameter` `for` `ftssave` `command.`^#4	Error log when the `ftssave` command was used
`1007`	`Error`	`Backup` `Error` (`112`)	`Incorrect` `parameter` `for` `ftsload` `command.`^#4	Error log when the `ftsload` command was used

#1

Name of the function that contains the process resulting in the error

#2

Location number in the function where the error was detected

#3

Name of the function resulting in the error

#4

Message indicating the nature of the error

#5

Details of the error (applicable to server and client services)

#6

Connection number managed by JP1/FTP

#7

Name of the connected user (when the server is used)

#8

IP address of the machine used by the connected user (when the server is used)

#9

Transmission number managed by JP1/FTP

#10

Name of the transmission file at the server (when the server is used)

#11

Response message from the connection-target server

#12

User name used for connection (when the client is used)

#13

Host name or IP address of the connection target (when the client is used)

#14

Send/receive type indicated as send (overwrite send), append (append send), or recv (receive)

#15

Name of the transmission file at the client (when the client is used)

#16

Name of the transmission file at the server (when the client is used)

#17

Transmission card name (when the client is used)

#18: One of the following:

1: The size of the log information has become smaller than the existing log information file.

2: The existing log information file has become smaller than the previous log information pointer.

3: The existing log information file is for an old version.

#19

In Windows Server 2008 and Windows Server 2012, the number in parentheses is displayed.

Table 8‒2: Action to be taken when the event ID is 2
Function name	Error message	Action
`IMEventLoad`	`The` `library` `was` `not` `found.` `(50)`	Install JP1/Base.
`IMEventOpenSender`	`Cannot` `connect` `to` `the` `event` `service.` `(40)`	Start JP1/Base.
`Jp1NnmStatusTrap`	`SNMP` `service` `is` `not` `installed.` `(1)`	Install the SNMP service.
`Jp1NnmStatusTrap`	`SNMP` `service` `is` `not` `started.` `(2)`	Start the SNMP service.
`Jp1NnmStatusTrap`	`The` `community` `name` `is` `not` `specified.` `(3)`	Set the community name of the SNMP service.
`Jp1NnmStatusTrap`	`SNMP` `trap` `trasmission-destination` `is` `not` `defined.` `(4)`	Set the trap destination for the SNMP service.

Table 8‒3: Action to be taken when the event ID is 4
Name of function resulting in error	Function name	Error message	Action
--	`IMEventLoad`	`The` `library` `was` `not` `found.` `(50)`	Install JP1/Base.
--	`IMEventOpenSender`	`Cannot` `connect` `to` `the` `event` `service.` `(40)`	Start JP1/Base.
--	`Jp1NnmStatusTrap`	`SNMP` `service` `is` `not` `installed.` `(1)`	Install the SNMP service.
--	`Jp1NnmStatusTrap`	`SNMP` `service` `is` `not` `started.` `(2)`	Start the SNMP service.
--	`Jp1NnmStatusTrap`	`The` `community` `name` `is` `not` `specified.` `(3)`	Set the community name of the SNMP service.
--	`Jp1NnmStatusTrap`	`SNMP` `trap` `trasmission-destination` `is` `not` `defined.` `(4)`	Set the trap destination for the SNMP service.
--	`JpSeventOpen`	`Cannot` `connect` `to` `the` `event` `server.` `(11)`	Check the status of the JP1/Base that is used as the event server.
`fts_ss_callproc`	`SearchPath`	`The` `system` `cannot` `find` `the` `file` `specified.` `(2)`	Check and, if necessary, revise Program to start when transmission ends normally (or Program to start when transmission ends abnormally) in the auto-start program settings.
`fts_ss_callproc`	`CreateProcess`	`Access` `is` `denied.` `(5)`	Check and, if necessary, revise Program to start when transmission ends normally (or Program to start when transmission ends abnormally) in the auto-start program settings.
`retrieve`	`GetFileAttributes`	`The` `system` `cannot` `find` `the` `file` `specified.` `(2)`	Check and, if necessary, revise the transmission file name at the server.
`store`	`CreateFile`	`Access` `is` `denied.` `(5)`	Check and, if necessary, revise the transmission file name at the server.

Legend:: --: There is no applicable function.

Table 8‒4: Action to be taken when the event ID is 7
Name of function resulting in error	Function name	Error message	Action
--	`IMEventLoad`	`The` `library` `was` `not` `found.` `(50)`	Install JP1/Base.
--	`IMEventOpenSender`	`Cannot` `connect` `to` `the` `event` `service.` `(40)`	Start JP1/Base.
--	`Jp1NnmStatusTrap`	`SNMP` `service` `is` `not` `installed.` `(1)`	Install the SNMP service.
--	`Jp1NnmStatusTrap`	`SNMP` `service` `is` `not` `started.` `(2)`	Start the SNMP service.
--	`Jp1NnmStatusTrap`	`The` `community` `name` `is` `not` `specified.` `(3)`	Set the community name of the SNMP service.
--	`Jp1NnmStatusTrap`	`SNMP` `trap` `trasmission-destination` `is` `not` `defined.` `(4)`	Set the trap destination for the SNMP service.
--	`gethostbyname`	`Authoritative` `Answer` `Host` `not` `found.` `(11001)`	Check and, if necessary, revise the host name in the transmission information.
`fts_cs_callproc`	`SearchPath`	`The` `system` `cannot` `find` `the` `file` `specified.` `(2)`	Check and, if necessary, revise Program to start at normal end (or Program to start at abnormal end) in the transmission settings.
`fts_cs_callproc`	`CreateProcess`	`Access` `is` `denied.` `(5)`	Check and, if necessary, revise Program to start at normal end (or Program to start at abnormal end) in the transmission settings.
`sendrequest`	`GetFileAttributes`	`The` `system` `cannot` `find` `the` `file` `specified.` `(2)`	Check and, if necessary, revise the transmission file name at the client.
`fts_cs_recvrequest`	`CreateFile`	`Access` `is` `denied.` `(5)`	Check and, if necessary, revise the transmission file name at the client.

Legend:: --: There is no applicable function.

To Page Top