Job Management Partner 1 Version 10, Job Management Partner 1/Automatic Job Management System 3 Operator's Guide
The Monitor Details - [Jobnet] dialog box allows you to check the execution status of the selected jobnet (jobnet, remote jobnet, or jobnet connector) and the details about the execution result. The type of dialog box to be displayed differs depending on the icon you choose. The following describes the dialog box to be displayed for each case.
- When you select a root jobnet:
The Monitor Details - [Jobnet] dialog box (for a root jobnet) appears.
- When you select a nested jobnet:
The Monitor Details - [Jobnet] dialog box (for a nested jobnet) appears.
- When you select a root remote jobnet:
The Monitor Details - [Remote Jobnet] dialog box (for a root remote jobnet) appears.
- When you select a nested remote jobnet:
The Monitor Details - [Remote Jobnet] dialog box (for a nested remote jobnet) appears.
- When you select a jobnet connector:
The Monitor Details - [Jobnet Connector] dialog box appears.
Each of the following two groups of dialog boxes displays the same items.
- Monitor Details - [Jobnet] dialog box (for a root jobnet) and Monitor Details - [Remote Jobnet] dialog box (for a root remote jobnet)
- Monitor Details - [Jobnet Connector] dialog box, Monitor Details - [Jobnet] dialog box (for a nested jobnet), and Monitor Details - [Remote Jobnet] dialog box (for a nested remote jobnet)
The following figures show the Monitor Details - [Jobnet] dialog box (for a root jobnet) and the Monitor Details - [Jobnet Connector] dialog box.
Figure 15-65 Monitor Details - [Jobnet] dialog box
![[Figure]](FIGURE/ZV140740.GIF)
Figure 15-66 Monitor Details - [Jobnet Connector] dialog box
![[Figure]](FIGURE/ZV140750.GIF)
The following explains the displayed items.
- Unit name
- Displays the full path name of a unit.
- Status
- Displays the status of the unit.
- Change plan
- Displays whether any plan in the unit has been changed.
- Hold
- Displays whether or not the execution of the unit is suspended.
- Scheduled start time
- Displays the time at which to start executing the unit.
- Start time
- Displays the time when the execution of the unit started.
- The execution start date and time displayed here are the date and time when the unit entered the Now running status on the manager host.
- To check the actual date and time when a job began to be executed on the agent, execute the ajsshow command. In the ajsshow command, specify the date and time when job execution started on another host (%V) in the format indicator.
- For details about the ajsshow command, see ajsshow in 2. Commands in the manual Job Management Partner 1/Automatic Job Management System 3 Command Reference 1.
- Rerun start time
- Displays the time when the re-execution of the unit started.
- When the unit is re-executed, the rerun start time is set for the upper-level jobnet at the rerun start point.
- However, the rerun start time is not set for the root jobnet if the root jobnet is being executed. If the root jobnet has terminated and the root jobnet has been specified for the rerun start point, the rerun start time is exclusively set for the root jobnet.
- End time
- Displays the time when the execution of the unit ended.
- The execution end date and time displayed here are the date and time when the unit entered the end status on the manager host.
- To check the actual date and time when a job ended on the agent, execute the ajsshow command. In the ajsshow command, specify the date and time when job execution ended on another host (%Q) in the format indicator.
- For details about the ajsshow command, see ajsshow in 2. Commands in the manual Job Management Partner 1/Automatic Job Management System 3 Command Reference 1.
- Delay status
- Displays the delay status of the unit.
- Time when start delayed
- Displays the start time for monitoring for a start delay.
- Time when end delayed
- Displays the date and time for monitoring an end delay.
- For monitoring of an end delay for the scheduled end time in the schedule, the system assumes the following to be the time when the end is delayed: relative time from the scheduled start time and absolute time of the scheduled end.
- When an end delay is monitored based on the time required for execution, this text box shows the number of days and hours from the start date and time. Therefore, the date and time from which to start detecting an end delay is determined when the jobnet starts to be executed.
- If you have specified monitoring of an end delay based on both the scheduled end time and the time required for execution, the earlier time is shown here.
- Start delayed
- Displays whether a delayed start has been specified.
- End delayed
- Displays whether a delayed end has been specified.
- Exec. ID (Source)
- Displays the execution ID of the connected jobnet connector.
- A hyphen (-) is displayed for jobnets for which execution order control is not performed using jobnet connectors or for remote jobnets.
- This text box displays None when execution order control is performed but no jobnet connector is connected. The text box also displays None when you do not have reference permission for the connected jobnet connector.
- The text box appears only in the Monitor Details - [Jobnet] dialog box (for a root jobnet) and Monitor Details - [Remote Jobnet] dialog box (for a root remote jobnet).
- Cautionary note
- When the connected jobnet connector is under a scheduler service on a different host, you need to start the JP1/AJS3 service on the host with the jobnet connector beforehand.
- Supplementary notes
- Exec. order method
- Displays an execution order control method.
- You can temporarily change the execution order control method for each generation. This text box displays a method as follows.
- When the method is not changed:
Follow the definition. (execution order control method) appears.
- When the method is changed from Asynchro to Synchro:
Synchro appears.
- When the method is changed from Synchro to Asynchro:
Asynchro appears.
- A hyphen (-) is displayed for jobnets for which execution order control is not performed and for remote jobnets.
- This text box appears only in the Monitor Details - [Jobnet] dialog box (for a root jobnet) and Monitor Details - [Remote Jobnet] dialog box (for a root remote jobnet).
- Exec. ID (Destination)
- Displays the execution ID of the connection-destination jobnet when you select a jobnet connector. The text box displays None when no jobnet is connected. The text box also displays None when you do not have reference permission for the connection-destination jobnet.
- This text box appears only in the Monitor Details - [Jobnet] dialog box (for a nested jobnet), Monitor Details - [Remote Jobnet] dialog box (for a nested remote jobnet), and Monitor Details - [Jobnet Connector] dialog box.
- Cautionary note
- When the jobnet connector is connected to a jobnet under a scheduler service on a different host, you need to start the JP1/AJS3 service on the host where the connection-destination jobnet exist.
- Supplementary notes
- Waiting
- If the unit has wait conditions, this field shows whether the wait conditions are satisfied.
- If the wait conditions are not satisfied:
Displays Yes.
- If the wait conditions are satisfied:
Displays None.
- This field shows a hyphen if any of the following apply:
- The unit has no wait conditions
- The connection target is JP1/AJS2 - Manager or a version of JP1/AJS3 - Manager earlier than 09-50
- The JP1/AJS3 - Manager database uses the compatible ISAM configuration
- Execution result details
- If you have selected a remote jobnet, you can click the Details button. If you click this button, the Execution Result Details dialog box appears. For more information, see 15.3.39 Execution Result Details dialog box.
- Edit Def button
- You see the Define Details - [Jobnet] dialog box or Define Details - [Remote Jobnet] dialog box used to define detailed information about a unit. For more information, see 15.3.8 Define Details - [Jobnet] dialog box (for a root jobnet), 15.3.9 Define Details - [Jobnet] dialog box (for a nested jobnet), 15.3.10 Define Details - [Remote Jobnet] dialog box (for a root remote jobnet), or 15.3.11 Define Details - [Remote Jobnet] dialog box (for a nested remote jobnet).
- Cautionary notes
- The displayed execution status, which is acquired when the dialog box appears, may differ from the contents displayed in the list area.
- Even for the same target unit, multiple dialog boxes appear.
- When you display the dialog box from the JP1/AJS3 - View window (Main window), the execution status is not automatically updated.
- The unit start and end times display the time associated with JP1/AJS3 - Manager. To determine the actual start and end times for a jobs or other units, see the log for JP1/AJS3 - Agent.
- Note the following when you display the Monitor Details dialog box for a generation without fixed connection with a jobnet connector or connection-destination jobnet:
- When you specify a jobnet connector or a connection-destination jobnet on the host in a different authentication bloc as the connection destination, you might need to log in to the host containing the destination item in order to obtain an Exec. ID (Source) or Exec. ID (Destination).
- Because the local host might need to communicate with the host containing the connection destination unit, you need to start the JP1/AJS3 service on that host beforehand. If the JP1/AJS3 service is not active, a communication error occurs. You cannot perform other operations before a communication error is detected.
Copyright (C) 2012, Hitachi, Ltd.
Copyright (C) 2012, Hitachi Solutions, Ltd.