3.2.1 Messages KAPM00001 through KAPM99999
-
KAPM00001-E
ID=aa...aa,LogTraceLibrary error.Trace START failed. bb...bb
[Action]
An attempt to start the log trace has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: ID of the program using the log
bb...bb: Error message output by the log trace library when the system failed to start the trace
-
KAPM00002-E
ID=aa...aa,LogtraceLibrary error.Trace STOP failed. bb...bb
[Action]
An attempt to stop the log trace has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: ID of the program using the log
bb...bb: Error message output by the log trace library when the system failed to stop the trace
-
KAPM00003-W
ID=aa...aa,Trace output error.
[Action]
An attempt to output the log trace has failed.
Check whether the log file is read only.
aa...aa: ID of the program using the log
-
KAPM00004-W
ID=aa...aa,Integrated trace output error.
[Action]
An attempt to output an integrated log trace has failed.
Check whether the Hitachi Network Objectplaza Trace Monitor 2 service is running.
aa...aa: ID of the program using the log
-
KAPM00005-E
File I/O failed.(filename=aa...aa).
[Action]
An attempt to create a version file has failed.
Check whether the version file specified for aa...aa can be written.
aa...aa: Name of the version file
-
KAPM00006-E
ID=aa...aa,Invalid eventlog source.Eventlog's config not found in the registry(source name="HiCommand Log")
[Action]
The registry for Eventlog was not found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: ID of the program using the log
-
KAPM00011-E
ID=aa...aa,Versionfile name is null.
[Action]
The version file name has not been specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: ID of the program using the log
-
KAPM00012-E
ID=aa...aa,PP version is null.
[Action]
The version of each PP has not been specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: ID of the program using the log
-
KAPM00013-E
ID=aa...aa,Trace log file name is null.
[Action]
The name of the individual log trace has not been specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: ID of the program using the log
-
KAPM00014-E
ID=aa...aa,Class name is null.
[Action]
The class name of the program to be used to output the log has not been specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: ID of the program using the log
-
KAPM00015-E
ID=aa...aa,Kind of Event is null.
[Action]
The value that indicates the type of message event for output has not been specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: ID of the program using the log
-
KAPM00016-E
ID=aa...aa,Message-ID is null.
[Action]
The message ID for the message to be output has not been specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: ID of the program using the log
-
KAPM00017-E
aa...aa
[Action]
A NullPointerException occurred in LogTraceManager.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: NullPointerException message
-
KAPM00018-E
aa...aa
[Action]
An unexpected exception occurred in LogTraceManager.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception message
-
KAPM00019-E
ID=aa...aa,SyslogID size error:idEnt=bb...bb
[Action]
The ID (bb...bb) length attached to Eventlog is too long.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: ID of the program using the log
bb...bb: Eventlog ID
-
KAPM00020-E
ID=aa...aa,Invalid version length:version=bb...bb
[Action]
The version character string is too long.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: ID of the program using the log
bb...bb: Version character string
-
KAPM00021-E
ID=aa...aa,Invalid log file number:logNum=bb...bb
[Action]
The number of individual log trace files is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: ID of the program using the log
bb...bb: Number of individual log trace files
-
KAPM00022-E
ID=aa...aa,Invalid log file size:logSize=bb...bb
[Action]
The size of an individual log trace file is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: ID of the program using the log
bb...bb: File size of the individual log trace
-
KAPM00023-E
ID=aa...aa,Invalid message type:kind=bb...bb
[Action]
A value indicating the message type is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: ID of the program using the log
bb...bb: Message type
-
KAPM00024-E
ID=aa...aa,Invalid output level:level=bb...bb
[Action]
An invalid log output level exists in the code.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: ID of the program using the log
bb...bb: Output level
-
KAPM00025-E
The value of the encoding setting bb...bb of the unique log output of aa...aa is invalid.
[Action]
The value of the encoding setting bb...bb of the unique log output of aa...aa is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Program name request to output log
bb...bb: Encoding
-
KAPM00090-I
The SSO server started successfully.
[Action]
The SSO server started successfully.
-
KAPM00091-E
An attempt to start the SSO server has failed.
[Action]
An attempt to start the SSO server has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00092-I
The SSO server was stopped successfully.
[Action]
The SSO server was stopped successfully.
-
KAPM00101-E
An authentication error occurred.
[Action]
An authentication error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00102-E
An error occurred during DBMS access processing.
[Action]
An error occurred during DBMS access processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00103-E
The DBMS is not running.
[Action]
The DBMS is not running.
Make sure the DBMS has started.
-
KAPM00104-E
The product name is not specified.
[Action]
The product name is not specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00105-E
An unexpected value was returned from the integrated authentication server. (aa...aa)
[Action]
An unexpected value was returned from the integrated authentication server.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Unexpected return value
-
KAPM00106-E
An attempt to update the authentication data has failed.
[Action]
An attempt to update the authentication data has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00107-E
An attempt to delete the authentication data has failed.
[Action]
An attempt to delete the authentication data has failed.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM00108-E
An attempt to print the authentication data has failed.
[Action]
An attempt to print the authentication data has failed.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM00110-E
The HSSOContext value is invalid.
[Action]
The HSSOContext value is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00111-I
The authentication data was successfully updated.
[Action]
The authentication data was successfully updated.
-
KAPM00112-I
The authentication data was successfully deleted. (aa...aa)
[Action]
The authentication data was successfully deleted.
aa...aa: Product name
-
KAPM00113-I
The authentication data is already deleted. (aa...aa)
[Action]
The authentication data is already deleted.
aa...aa: Product name
-
KAPM00114-I
The authentication data was successfully displayed.
[Action]
The authentication data was successfully displayed.
-
KAPM00115-E
An attempt to communicate with the SSO server has failed.
[Action]
An attempt to communicate with the SSO server has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00116-E
An attempt to update authentication data has failed.
[Action]
This message is displayed when an attempt to update authentication data fails.
Please restart the Single Sign On server.
-
KAPM00117-E
The RD area of HBase is blocked.
[Action]
The RD area of HBase is blocked.
Remove the cause of the HiRDB blockage, and then try again.
-
KAPM00119-E
Deletion of the license event data has failed.
[Action]
Deletion of the license event data has failed.
Confirm that the DBMS is running, and then retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM00130-E
There is no value in the request.
[Action]
There is no value in the request.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00131-E
A required token is not specified.
[Action]
A required token is not specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00132-E
The event name is invalid.
[Action]
The event name is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00133-E
The DBMS is not running.
[Action]
The DBMS is not running.
Make sure the DBMS has started.
-
KAPM00134-E
An error occurred during a DBMS access.
[Action]
An error occurred during a DBMS access.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00137-E
An authentication error occurred.
[Action]
An authentication error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00138-E
Authentication data for delete processing is invalid.
[Action]
Authentication data for delete processing is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00139-I
Deletion of authentication data for all products will now start.
[Action]
Deletion of authentication data for all products will now start.
-
KAPM00140-I
Deletion of authentication data will now start.
Application name: aa...aa
Service name: bb...bb
[Action]
Deletion of authentication data will now start.
aa...aa: Application name
bb...bb: Service name
-
KAPM00141-E
An attempt to lock the table has failed.
[Action]
An attempt to lock the table has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00145-E
The RD area of HBase is blocked.
[Action]
The RD area of HBase is blocked.
Remove the cause of the HiRDB blockage, and then try again.
-
KAPM00162-E
There is an error in the protocol. (element = aa...aa)
[Action]
There is an error in the protocol.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Element
-
KAPM00163-E
There is an error in the protocol. (element = aa...aa, attribute = bb...bb, value = cc...cc)
[Action]
There is an error in the protocol.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Element
bb...bb: Attribute
cc...cc: Value
-
KAPM00192-E
An exception was detected.
[Action]
An exception was detected.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00199-E
aa...aa
[Action]
Detailed information for KAPMxxxxx-E. This indicates the thrown exception object and the backtrace for that object.
See the message KAPMxxxxx-E.
aa...aa: Name of the exception object and the reason that object was thrown, or the backtrace for that object
-
KAPM00203-E
The DBMS is not running.
[Action]
The DBMS is not running.
Make sure the DBMS has started.
-
KAPM00204-E
The RD area of HBase is blocked.
[Action]
The RD area of HBase is blocked.
Remove the cause of the HiRDB blockage, and then try again.
-
KAPM00205-E
An error occurred during access to the DBMS.
[Action]
An error occurred during access to the DBMS.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00206-E
The specified event data has already been registered. (application type = aa...aa, event type = bb...bb, event code = cc...cc)
[Action]
The specified event data has already been registered.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Application type
bb...bb: Event type
cc...cc: Event code
-
KAPM00207-E
Event data cannot be updated because no event data exists. (application type = aa...aa, event type = bb...bb, event code = cc...cc)
[Action]
Event data cannot be updated because no event data exists.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Application type
bb...bb: Event type
cc...cc: Event code
-
KAPM00208-E
Communication with the SSO server has failed.
[Action]
Communication with the SSO server has failed.
Make sure the following have started: the HBase Storage Mgmt Common Service or HBase Storage Mgmt Web Service, and the database.
-
KAPM00209-E
Authentication has failed.
[Action]
Authentication has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00210-E
A program type specified for TNB_SoftwareFeature is not registered. (application type = aa...aa)
[Action]
A program type specified for TNB_SoftwareFeature is not registered.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Application type
-
KAPM00211-E
Associated data does not exist. (application type = aa...aa)
[Action]
Associated data does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Application type
-
KAPM00212-E
An event management object cannot be deleted because the specified parameter is invalid. (application type = aa...aa, event type = bb...bb, event code = cc...cc)
[Action]
An event management object cannot be deleted because the specified parameter is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Application type
bb...bb: Event type
cc...cc: Event code
-
KAPM00213-E
The value registered in the database is invalid. (application type = aa...aa, event type = bb...bb, event code = cc...cc)
[Action]
The value registered in the database is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Application type
bb...bb: Event type
cc...cc: Event code
-
KAPM00214-E
The same information is already registered in the database. (application type = aa...aa, event type = bb...bb, event code = cc...cc)
[Action]
The same information is already registered in the database.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Application type
bb...bb: Event type
cc...cc: Event code
-
KAPM00215-E
An attribute value is invalid. (attribute = aa...aa)
[Action]
An attribute value is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Attribute
-
KAPM00216-W
The attribute length exceeds the maximum limit. (attribute = aa...aa, value = bb...bb, maximum limit = cc...cc)
[Action]
The attribute length exceeds the maximum limit.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Attribute
bb...bb: Value
cc...cc: Maximum limit
-
KAPM00217-E
An invalid parameter is specified.
[Action]
An invalid parameter is specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00218-W
The relation between the license warning window and the version window is not registered. (application type = aa...aa)
[Action]
The relation between the license warning window and the version window is not registered. (application type = aa...aa)
aa...aa: application type
-
KAPM00252-E
The license information file does not exist. (license information file = aa...aa)
[Action]
The license information file does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: License information file
-
KAPM00253-E
The license information file might be corrupted. (license information file = aa...aa)
[Action]
The license information file might be corrupted.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: License information file
-
KAPM00254-E
An attempt to read the license information file has failed. (license information file = aa...aa)
[Action]
An attempt to read the license information file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: License information file
-
KAPM00255-E
The license information file cannot be accessed. (license information file = aa...aa)
[Action]
The license information file cannot be accessed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: License information file
-
KAPM00256-E
The license information file contains invalid information. (line number = aa...aa, value = bb...bb)
[Action]
The license information file contains invalid information.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: line number
bb...bb: value
-
KAPM00257-E
The format ID of the license information in the license information file is invalid. (format ID = aa...aa)
[Action]
The format ID of the license information in the license information file is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: format ID
-
KAPM00258-E
The length of the license information in the license information file is invalid. (format ID = aa...aa, number of characters = bb...bb)
[Action]
The length of license information in the license information file is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: format ID
bb...bb: number of characters
-
KAPM00259-E
Valid license information does not exist.
[Action]
Valid license information does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00260-E
The PPID in the license information file contains non-hexadecimal characters. (PPID = aa...aa)
[Action]
The PPID in the license information file contains non-hexadecimal characters.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: PPID
-
KAPM00261-E
The device number in the license information file contains non-alphanumeric characters. (device number = aa...aa)
[Action]
The device number in the license information file contains non-alphanumeric characters.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: device number
-
KAPM00262-E
The license type in the license information file is invalid. (license type = aa...aa)
[Action]
The license type in the license information file is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: license type
-
KAPM00263-E
The license capacity in the license information file contains non-alphanumeric characters. (license capacity = aa...aa)
[Action]
The license capacity in the license information file contains non-alphanumeric characters.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: license capacity
-
KAPM00264-E
The expiration date in the license information file contains non-numerical characters. (expiration date = aa...aa)
[Action]
The expiration date in the license information file contains non-numerical characters.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: expiration date
-
KAPM00265-E
The serial number in the license information file contains non-alphanumeric characters. (serial number = aa...aa)
[Action]
The serial number in the license information file contains non-alphanumeric characters.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: serial number
-
KAPM00266-E
The subscription license capacity in the license information file contains non-alphanumeric characters. (capacity of subscription license = aa...aa)
[Action]
The subscription license capacity in the license information file contains non-alphanumeric characters.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: capacity of subscription license
-
KAPM00267-E
The device type in the license information file contains non-alphanumeric characters. (device type = aa...aa)
[Action]
The device type in the license information file contains non-alphanumeric characters.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: device type
-
KAPM00269-E
The specified argument is invalid.
[Action]
The specified argument is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00270-E
The used capacity of the specified storage system is invalid. (used capacity = aa...aa)
[Action]
The used capacity of the specified storage system is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Used capacity
-
KAPM00271-E
The license is in emergency status.
[Action]
The license is in emergency status.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00272-E
The meter-based term license capacity cannot be reduced because a meter-based term license cannot be applied to the target storage system.
[Action]
The meter-based term license capacity cannot be reduced because a meter-based term license cannot be applied to the target storage system.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00273-E
The capacity after reduction falls below the minimum of -99,999,999 TB.
[Action]
The capacity after reduction falls below the minimum of -99,999,999 TB.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00274-E
The specified license information is invalid. (attribute = aa...aa)
[Action]
The specified license information is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Attribute
-
KAPM00275-W
The current storage system's used capacity is within the range of the usable capacity under a permanent license. (usable capacity under permanent license = aa...aa, usable capacity under meter-based term license = bb...bb)
[Action]
The current storage system's used capacity is within the range of the usable capacity under a permanent license.
aa...aa: Usable capacity under a permanent license
bb...bb: Usable capacity under a meter-based term license
-
KAPM00276-E
The usable capacity under the meter-based term license is less than 0. (usable capacity under meter-based term license = aa...aa)
[Action]
The usable capacity under the meter-based term license is less than 0.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Usable capacity under a meter-based term license
-
KAPM00277-W
An attempt to write to the license history has failed.
[Action]
An attempt to write to the license history has failed.
-
KAPM00278-W
An attempt to modify the file attribute failed. (file name = aa...aa)
[Action]
An attempt to modify the file attribute failed.
aa...aa: file name
-
KAPM00279-E
Exclusive control has failed.
[Action]
Exclusive control has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00280-E
A time out occurred during exclusive control.
[Action]
A timeout occurred during exclusive control.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM00281-E
The meter-based term licensed capacity cannot be reduced because aa...aa day(s) passed since the usable license capacity became negative.
[Action]
The meter-based term licensed capacity cannot be reduced because aa...aa day(s) passed since the usable license capacity became negative.
Check the meter-based term license information, and then add a license key if necessary.
aa...aa: Number of days since the usable licensed capacity became negative
-
KAPM00282-W
The license information file does not exist. (application type = aa...aa)
[Action]
There is no license information file for the application output in the message.
If no license has been entered, this message might be output even during normal operation.
aa...aa: Application type
-
KAPM00283-E
The license information file might be corrupted. (application type = aa...aa)
[Action]
The license information file might be corrupted.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Application type
-
KAPM00284-E
An attempt to read the license information file failed. (application type = aa...aa)
[Action]
An attempt to read the license information file failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Application type
-
KAPM00285-E
The license information file cannot be accessed. (application type = aa...aa)
[Action]
The license information file cannot be accessed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Application type
-
KAPM00286-E
The number of servers after the subtraction operation fell below the minimum value -99,999,999.
[Action]
The number of servers after the subtraction operation fell below the minimum value -99,999,999.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM00287-E
Information related to the exclusion control failure will be output. (function name = aa...aa, detailed error code = bb...bb, processing time = cc...cc)
[Action]
Information related to the exclusion control failure will be output.
Take action according to the previous message.
aa...aa: Function name
bb...bb: Detailed error code
cc...cc: Processing time
-
KAPM00288-E
An attempt to release the lock failed.
[Action]
An attempt to release the lock failed.
Retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM00900-I
The SSO server started successfully.
[Action]
The SSO server started successfully.
-
KAPM00901-E
An attempt to start the SSO server has failed.
[Action]
An attempt to start the SSO server has failed.
-
KAPM00902-I
The SSO server was stopped successfully.
[Action]
The SSO server was stopped successfully.
-
KAPM01001-I
Initializing HssoServer configuration.
[Action]
Servlet initialization has started.
-
KAPM01002-E
The system property indicated by hcmds.home could not be found.
[Action]
The system property indicated by hcmds.home could not be found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01003-E
HssoServerRes1_0.dtd was not found. path= aa...aa
[Action]
HssoServerRes1_0.dtd was not found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Path of file HssoServerRes1_0.dtd
-
KAPM01004-E
Can't read DTD files.
[Action]
An attempt to read the DTD file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01005-W
Failed to close FileStream.
[Action]
An attempt to close FileStream has failed.
-
KAPM01008-I
HTTP:POST from aa...aa
[Action]
The IP address of the requesting client.
aa...aa: IP address
-
KAPM01010-E
Can't get InputStream from Request.
[Action]
An attempt to acquire an InputStream from a client's request has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01013-E
Unsupported command was requested.
[Action]
The requested command name is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01017-E
Unsupported method was requested.
[Action]
The requested method name is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01019-E
Unsupported method was requested.
[Action]
The requested method name is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01024-I
Request Information: Version = aa...aa, Command = bb...bb, ID = cc...cc
[Action]
The request information will be displayed.
aa...aa: Version
bb...bb: Command
cc...cc: ID
-
KAPM01025-E
A fatal error occurred.
[Action]
A fatal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01026-E
An attempt to initialize the HSSO Server configuration has failed.
[Action]
An attempt to initialize the HSSO server configuration has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01028-E
The file "aa...aa" could not be read. Path = bb...bb
[Action]
The file "aa...aa" could not be read.
Check the specified file path and the permission for reading the specified file.
aa...aa: File name
bb...bb: File path name
-
KAPM01034-E
Can't get the required information from request. Request is invalid.
[Action]
The request format is invalid (analysis was successful).
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01036-E
Request XML can't parse to DOM. - aa...aa
[Action]
The format of the request is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception message
-
KAPM01040-E
XML version aa...aa for HssoClient is not supported.
[Action]
The version of the specified request is not supported.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Request version
-
KAPM01042-E
An attempt to parse the request has failed.
[Action]
An attempt to parse the request has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01046-E
The format of the request was invalid. Cause = aa...aa
[Action]
The format of the request was invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Cause
-
KAPM01051-E
The creation of HSSOContext for authentication has failed. aa...aa
[Action]
An attempt to create HSSOContext has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception message
-
KAPM01052-I
aa...aa accessed.
[Action]
Indicates the ID of the accessing user.
aa...aa: User ID
-
KAPM01053-E
Authentication Failed.
[Action]
An attempt at client authentication has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01055-E
The system property specified in hcmds.home cannot be found.
[Action]
The system property specified in hcmds.home cannot be found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01056-E
HDVM.user not found at hcmds.home.
[Action]
HDVM.user not found at hcmds.home.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01057-E
HDVM.password not found at hcmds.home.
[Action]
HDVM.password not found at hcmds.home.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01059-E
The specified HSSO session is invalid, or does not exist. Session ID = aa...aa
[Action]
The specified HSSO session is invalid, or does not exist.
Log in again.
aa...aa: Session ID
-
KAPM01061-E
An invalid value is set in the configuration file. Parameter = aa...aa
[Action]
An invalid value is set in the configuration file.
Check the value of the parameter specified for aa...aa in the configuration file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris SPARC : /opt/HiCommand/Base/conf/user.conf
Solaris10(x64) or Linux : <HiCommand Suite Common Component installation-folder>/Base/conf/user.conf
aa...aa: Parameter name
-
KAPM01062-E
A parameter is not set in the configuration file. Parameter = aa...aa
[Action]
A parameter is not set in the configuration file.
Check the value of the parameter specified for aa...aa in the configuration file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris SPARC : /opt/HiCommand/Base/conf/user.conf
Solaris10(x64) or Linux : <HiCommand Suite Common Component installation-folder>/Base/conf/user.conf
aa...aa: Parameter name
-
KAPM01063-I
HSSO configuration: Virtual Host Name = aa...aa
[Action]
The set virtual host name will now be displayed.
aa...aa: Virtual host name
-
KAPM01065-E
Can't create DOM tree. - aa...aa
[Action]
An attempt to create a DOM tree from the client request has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception message
-
KAPM01066-E
A CIM Repository exception occurred.
[Action]
A CIM Repository exception occurred.
For the HiCommand V3.x series, confirm that InterBase or InterClient is running.
For the HiCommand V4.x series or later, confirm that HiRDB is running.
If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM01067-E
The status of the response from Device Manager was FAILED.
[Action]
The status of the response from HiCommand Device Manager was FAILED. See the following message KAPM01068-E for the cause.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01068-E
aa...aa
[Action]
aa...aa: Information that is included in the response of HiCommand Device Manager.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Information that is included in the response of HiCommand Device Manager
-
KAPM01069-E
The protocol version aa...aa for HSSO Client is not supported.
[Action]
The protocol version aa...aa for HSSO Client is not supported.
An error might have occurred in an HSSO operation requested by a secondary server. Check whether an HSSO error has occurred by referring to the log data output by the secondary server. If an error has occurred, upgrade the Suite product installed on the primary server.
aa...aa: Protocol version
-
KAPM01073-E
The format of the response from Device Manager was invalid.
[Action]
The format of the response from HiCommand Device Manager was invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01081-E
Authentication has failed. User ID = aa...aa
[Action]
Authentication has failed.
Log in again using a valid user ID and password.
aa...aa: User ID
-
KAPM01084-I
The HSSO session has started. Session ID = aa...aa
[Action]
The HSSO session has started.
aa...aa: Session ID
-
KAPM01088-E
An attempt to load the class failed. Class = aa...aa
[Action]
An attempt to load the class failed.
Confirm that the class specified for aa...aa is the class specified in HSSO.classpath.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris SPARC : /opt/HiCommand/Base/conf/user.conf
Solaris10(x64) or Linux : <HiCommand Suite Common Component installation-folder>/Base/conf/user.conf
aa...aa: Class name
-
KAPM01089-E
An attempt to create the instance of the class for authentication failed. Class = aa...aa
[Action]
An attempt to create the instance of the class for authentication failed.
Check the value of HSSO.authentication.module in the configuration file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris SPARC : /opt/HiCommand/Base/conf/user.conf
Solaris10(x64) or Linux : <HiCommand Suite Common Component installation-folder>/Base/conf/user.conf
aa...aa: Class name
-
KAPM01090-E
An attempt to create the instance of the class for authorization failed. Class = aa...aa
[Action]
An attempt to create the instance of the class for authorization failed.
Check the value of HSSO.authorization.module in the configuration file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris SPARC : /opt/HiCommand/Base/conf/user.conf
Solaris10(x64) or Linux : <HiCommand Suite Common Component installation-folder>/Base/conf/user.conf
aa...aa: Class name
-
KAPM01091-E
An attempt to initialize the authentication class failed. Class = aa...aa
[Action]
An attempt to initialize the authentication class failed.
Take action according to the proceeding message.
aa...aa: Class name
-
KAPM01092-E
An attempt to initialize the authorization class failed. Class = aa...aa
[Action]
An attempt to initialize the authorization class failed.
Take action according to the proceeding message.
aa...aa: Class name
-
KAPM01093-I
HSSO configuration: Authentication class = aa...aa
[Action]
The authentication class that HSSO uses will now be displayed.
aa...aa: Class name
-
KAPM01094-I
HSSO configuration: Authorization class = aa...aa
[Action]
The authorization class that HSSO uses will now be displayed.
aa...aa: Class name
-
KAPM01095-E
The authenticated user does not have permission. User ID = aa...aa, Application = bb...bb
[Action]
The authenticated user does not have permission.
Log in again as a user having the permission.
aa...aa: User ID
bb...bb: Application
-
KAPM01096-E
An attempt to authenticate the internal user has failed.
[Action]
An attempt to authenticate the internal user has failed.
Confirm that the user specified by the value of HDVM.user and HDVM.password in the following configuration file is registered in HiCommand Device Manager.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris or Linux : /opt/HiCommand/Base/conf/user.conf
-
KAPM01097-E
An exception occurred during internal authentication module processing.
[Action]
An exception occurred during internal authentication module processing.
Take action according to the proceeding message.
-
KAPM01098-E
An exception occurred during authentication module processing.
[Action]
An exception occurred during authentication module processing.
Take action according to the proceeding message.
-
KAPM01099-E
An exception occurred during authorization module processing.
[Action]
An exception occurred during authorization module processing.
Take action according to the proceeding message.
-
KAPM01103-I
HSSO configuration: Device Manager Server URL = aa...aa
[Action]
The URL of the HiCommand Device Manager server that HSSO uses will now be displayed.
aa...aa: HiCommand Device Manager server URL
-
KAPM01104-I
HSSO configuration: Device Manager Server Connection Timeout = aa...aa
[Action]
The timeout value for the connection with the HiCommand Device Manager server that HSSO uses will now be displayed.
aa...aa: HiCommand Device Manager server connection timeout
-
KAPM01105-E
The JP1 token is invalid.
[Action]
The JP1 token is invalid.
Log in again.
-
KAPM01106-E
An attempt to communicate with JP1/Base has failed.
[Action]
An attempt to communicate with JP1/Base has failed.
Check the status of JP1/Base.
-
KAPM01107-E
An error occurred due to a virtual host name. Function Code = aa...aa, Result Code = bb...bb
[Action]
An error occurred due to a virtual host name.
Check the value of hbase.virtualhost in the configuration file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris or Linux : /opt/HiCommand/Base/conf/user.conf
aa...aa: Function code
bb...bb: Result code
-
KAPM01108-E
An attempt to load the library associated with JP1/Base has failed.
[Action]
An attempt to load the associated with JP1/Base library has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01109-E
An exception occurred during JP1 token authentication processing. Function Code = aa...aa, Result Code = bb...bb
[Action]
An exception occurred during JP1 token authentication processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Function code
bb...bb: Result code
-
KAPM01114-E
An attempt to acquire the link and launch information failed.
[Action]
An attempt to acquire the link and launch information failed.
Take action according to the proceeding message.
-
KAPM01115-E
Exception in DeviceManager. DeviceManager returns FAILED. - aa...aa
[Action]
The response status of HiCommand Device Manager is "FAILED".
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error message acquired from HiCommand Device Manager
-
KAPM01116-E
No user was returned from DeviceManager.
[Action]
The GetUser response does not contain any user information.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01119-E
No user information is set in the HSSO session.
[Action]
No user information is set in the HSSO session.
Log in again.
-
KAPM01123-I
HSSO configuration: HSSO Session Timeout = aa...aa
[Action]
The timeout value (in seconds) of the HSSO session will now be displayed.
aa...aa: HSSO session timeout
-
KAPM01124-I
The login process has completed properly.
[Action]
This audit log data indicates that login was successful.
-
KAPM01125-E
The login process has failed.
[Action]
This audit log data indicates that login failed.
-
KAPM01152-E
Can't get the application name from request. Request is invalid.
[Action]
The application name cannot be acquired from the request. The request is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01154-W
aa...aa is not registered.
[Action]
aa...aa is not registered.
aa...aa: Application name
-
KAPM01156-E
Exception in Repository. - aa...aa
[Action]
An error occurred when the Common Repository was accessed.
See the message KAPM02xxx-E.
aa...aa: Message
-
KAPM01167-I
The database has stopped.
[Action]
The database has stopped.
-
KAPM01168-E
The RD area of HBase is blocked.
[Action]
The RD area of HBase is blocked.
Remove the cause of the HiRDB blockage, and then try again.
-
KAPM01169-E
Authentication of the JP1 token failed.
[Action]
Authentication of the JP1 token failed.
To determine the cause and resolve the problem, detailed investigation is required. Contact the support center, who may ask you to collect troubleshooting information.
-
KAPM01170-I
The JP1 token will now be authenticated.
[Action]
The JP1 token will now be authenticated.
-
KAPM01171-I
The JP1 token was successfully authenticated.
[Action]
The JP1 token was successfully authenticated.
-
KAPM01172-E
An error occurred while linking to the external authentication server.
[Action]
An error occurred while linking to the external authentication server.
Perform one of the following procedures.
For LDAP:
1. Use the host, port, and protocol set in exauth.properties to verify whether the external authentication server can be accessed, and verify the external authentication server settings and network status.
2. Use the hcmdsldapuser command to verify whether information is registered about the server whose name is set for the auth.server.name attribute in exauth.properties.
3. If STARTTLS is used, verify that SSL is set.
4. If OCSP is enabled, verify that the certificate is valid.
5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
For RADIUS:
1. Use the host, port, and protocol set in exauth.properties to verify whether the external authentication server can be accessed, and verify the external authentication server settings and network status.
2. Use the hcmdsradiussecret command to verify whether information is registered about the server whose name is set for the auth.server.name attribute in exauth.properties.
3. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
For Kerberos:
1. Verify that the realm name and KDC set in exauth.properties are correct.
2. Verify that the network is properly set up.
3. Verify that the external authentication server supports the Kerberos V5 protocol.
4. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
For JP1/Base:
1. Verify that JP1/Base on the primary server is running properly.
2. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
-
KAPM01178-E
An attempt to load init.conf failed.
[Action]
An attempt to load init.conf failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect
-
KAPM01179-E
The list of library files could not be retrieved properly.
[Action]
The list of library files could not be retrieved properly.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect
-
KAPM01205-E
No instance of Service associated with ServiceAccessPoint.
[Action]
An attempt to acquire the service associated with ServiceAccessPoint has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01206-E
No instance of SoftwareFeature associated with Service.
[Action]
An attempt to acquire the SoftwareFeature associated with the Service has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM01208-E
Exception in Repository. - aa...aa
[Action]
An error occurred in the access to the repository.
See the message KAPM02xxx-E.
aa...aa: Details about the repository access error
-
KAPM01209-W
ServiceAccessPoint is not registered.
[Action]
ServiceAccessPoint is not registered.
-
KAPM01220-E
Communication with the external authentication server has failed.
[Action]
Communication with the external authentication server has failed.
Perform one of the following procedures:
For LDAP:
1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network.
2. Use the hcmdsldapuser command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
3. If StartTLS is used, check the SSL settings.
4. If an OCSP is enabled, make sure that the certificate is valid.
5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
For RADIUS:
1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network.
2. Use the hcmdsradiussecret command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
3. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
For Kerberos:
1. Make sure that the realm name and KDC specified in exauth.properties are correct.
2. Make sure that the network is correctly connected.
3. Make sure that the external authentication server is compatible with the Kerberos V5 protocol.
4. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM01255-E
Exception in DeviceManager. DeviceManager returns FAILED. - aa...aa
[Action]
The response status of HiCommand Device Manager is "FAILED".
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error message acquired from HiCommand Device Manager
-
KAPM01302-E
Can't get the host name or port number of DeviceManager from configuration.
[Action]
The host name or port number of HiCommand Device Manager cannot be acquired from the configuration.
Confirm that the value of the properties HDVM.host and HDVM.port are set in init.conf.
-
KAPM01308-E
An attempt to communicate with Device Manager failed. URL = aa...aa
[Action]
An attempt to communicate with HiCommand Device Manager failed.
Check the status of HiCommand Device Manager, and check the values of HDVM.protocol, HDVM.host and HDVM.port in the configuration file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris or Linux : /opt/HiCommand/Base/conf/user.conf
aa...aa: URL
-
KAPM01309-E
The Device Manager Server XML API version aa...aa is not supported.
[Action]
HiCommand Device Manager server XML API version aa...aa is not supported.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Version
-
KAPM01312-E
DeviceManager Server version aa...aa is not supported.
[Action]
HiCommand Device Manager server version aa...aa is not supported.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Version of HiCommand Device Manager
-
KAPM01314-E
The connection to Device Manager timed out.
[Action]
The connection to HiCommand Device Manager timed out.
Confirm that HiCommand Device Manager is running.
-
KAPM01331-I
Connecting to DeviceManager Server specified by aa...aa
[Action]
The connection to HiCommand Device Manager is being established.
aa...aa: URL of HiCommand Device Manager
-
KAPM01336-E
URL aa...aa is invalid to DeviceManager Server.
[Action]
The format of the URL aa...aa for HiCommand Device Manager server is invalid.
Confirm that the values of the HDVM.host and HDVM.port properties are valid in init.conf.
aa...aa: URL of HiCommand Device Manager
-
KAPM01337-E
Authentication Failed in DeviceManager.
[Action]
An authentication error occurred in HiCommand Device Manager.
Confirm that the specified user was registered in HiCommand Device Manager.
-
KAPM01338-E
I/O Error regarding connection to DeviceManager.
[Action]
An I/O Error occurred in the communication with HiCommand Device Manager.
Confirm that HiCommand Device Manager is running.
-
KAPM01353-E
Can not map aa...aa.
[Action]
User permissions could not be mapped.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: User permissions
-
KAPM01401-I
Creating CIMClient.
[Action]
CIMClient creation is starting.
-
KAPM01402-E
Can't create CIMClient. - aa...aa
[Action]
An attempt to create CIMClient has failed.
See the message KAPM02xxx-E.
aa...aa: Exception message
-
KAPM02001-E
Can not be found database.
[Action]
The database could not be found.
Check the value of DATABASE.path in the following file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris or Linux : /opt/HiCommand/Base/conf/user.conf
-
KAPM02001-W
Some of connection updated the same instance together. So didn't update the instance.
[Action]
Some of connection updated the same instance together. So didn't update the instance.
Confirm that the candidate for updating was updated. If it was not updated, try again.
-
KAPM02002-E
Your user name and password are not defined.
[Action]
The name or password of the user accessing the database is invalid.
Check the value of DATABASE.user or DATABASE.password in the following file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris or Linux : /opt/HiCommand/Base/conf/user.conf
-
KAPM02003-E
An unknown host exception occurred while trying to open a socket connection to server.
[Action]
The host name of the database to be accessed is invalid.
Check the value of DATABASE.hostname in the following file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris or Linux : /opt/HiCommand/Base/conf/user.conf
-
KAPM02004-E
No suitable driver.
[Action]
The driver name for accessing the database is invalid.
Check the value of DATABASE.type in the following file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris or Linux : /opt/HiCommand/Base/conf/user.conf
-
KAPM02005-E
A socket exception occurred while trying to establish a socket connection to server.
[Action]
A socket exception occurred while trying to establish a socket connection to server.
Make sure that InterClient is running.
-
KAPM02006-E
InterServer is unable to locate the InterBase application or service.
[Action]
InterServer is unable to locate the InterBase application or service.
Make sure that InterBase is running.
-
KAPM02007-E
aa...aa
[Action]
An SQLException has occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception message
-
KAPM02008-E
aa...aa
[Action]
Another type of exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception message
-
KAPM02009-E
Failed to unlock a table when inserting a record or records.
[Action]
The table-unlock process that set the connection during the insert has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02010-E
Update data doesn't exist.
[Action]
The data could not be found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02011-E
Delete data doesn't exist.
[Action]
The data could not be found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02012-E
Search data doesn't exist.
[Action]
The data could not be found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02013-E
Exception happened when some CIM class was used.
[Action]
An error occurred while reading or using the value specified in CIM.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02014-E
An attempt to load the definition for a class has failed. Class name = aa...aa
[Action]
An attempt to load the definition for a class has failed.
Take action according to the proceeding message.
aa...aa: Class name
-
KAPM02015-E
A class definition could not be found. Class name = aa...aa
[Action]
A class definition could not be found.
Reboot the single signon service.
aa...aa: Class name
-
KAPM02016-E
A RepositoryException occurred.
[Action]
A RepositoryException occurred.
Take action according to the proceeding message.
-
KAPM02017-E
The parameter is null.
[Action]
The parameter is null.
This message provides additional information. Check the other messages that were output around the same time, and then follow the instructions given in those messages.
-
KAPM02018-E
The parameter is invalid.
[Action]
The parameter is invalid.
Take action according to the proceeding message.
-
KAPM02019-E
The CIMElement already exists.
[Action]
The CIMElement already exists.
Take action according to the proceeding message.
-
KAPM02020-E
Duplicate data exists.
[Action]
Duplicate data exists.
Take action according to the proceeding message.
-
KAPM02021-E
The CIMElement could not be found.
[Action]
The CIMElement could not be found.
Take action according to the proceeding message.
-
KAPM02023-E
The CIMObjectPath is incorrect. A key is required.
[Action]
The CIMObjectPath is incorrect. A key is required.
Take action according to the proceeding message.
-
KAPM02025-E
The CIMObjectPath contains an invalid property.
[Action]
The CIMObjectPath contains an invalid property.
Take action according to the proceeding message.
-
KAPM02027-E
The key property could not be changed.
[Action]
The key property could not be changed.
Take action according to the proceeding message.
-
KAPM02029-E
The initialize parameter is invalid.
[Action]
The initialize parameter in init.conf is invalid.
Take action according to the proceeding message.
-
KAPM02030-E
An unsupported data type was used.
[Action]
An unsupported data type was used.
Take action according to the proceeding message.
-
KAPM02031-E
The CIMClass is invalid. A KEY property is required.
[Action]
The CIMClass is invalid. A KEY property is required.
Take action according to the proceeding message.
-
KAPM02032-E
The CIMClass could not be deleted, because it contains instances.
[Action]
The CIMClass could not be deleted, because it contains instances.
Take action according to the proceeding message.
-
KAPM02033-E
The CIMClass could not be deleted, because it contains subclasses.
[Action]
The CIMClass could not be deleted, because it contains subclasses.
Take action according to the proceeding message.
-
KAPM02034-E
A ClassNotFoundException occurred.
[Action]
A ClassNotFoundException occurred.
Take action according to the proceeding message.
-
KAPM02035-E
A CIMInConnectionPoolException occurred.
[Action]
A CIMInConnectionPoolException occurred.
Take action according to the proceeding message.
-
KAPM02036-E
A connection to the database could not be established.
[Action]
A connection to the database could not be established.
Take action according to the proceeding message.
-
KAPM02038-W
A DeadLockException occurred. Description = aa...aa
[Action]
A DeadLockException occurred.
Take action according to the proceeding message.
aa...aa: Class name
-
KAPM02039-W
A CIMInDeadLockException occurred.
[Action]
A CIMInDeadLockException occurred.
Take action according to the proceeding message.
-
KAPM02040-E
The CIMInstance is invalid.
[Action]
The CIMInstance is invalid.
Take action according to the proceeding message.
-
KAPM02041-E
The CIMObjectPath is invalid.
[Action]
The CIMObjectPath is invalid.
This message provides additional information. Check the other messages that were output around the same time, and then follow the instructions given in those messages.
-
KAPM02042-E
The name of property is invalid.
[Action]
The name of property is invalid.
Take action according to the proceeding message.
-
KAPM02044-E
A DBNotFoundException occurred.
[Action]
A DBNotFoundException occurred.
Take action according to the proceeding message.
-
KAPM02045-E
The CIMClass is invalid.
[Action]
The CIMClass is invalid.
Take action according to the proceeding message.
-
KAPM02046-E
The CIMProperty is invalid. The KEY property must be set.
[Action]
The CIMProperty is invalid. The KEY property must be set.
Take action according to the proceeding message.
-
KAPM02047-E
The type of class is invalid.
[Action]
The type of class is invalid.
Take action according to the proceeding message.
-
KAPM02048-E
Failed to get membership groups.
[Action]
Failed to get membership groups.
Take action according to the proceeding message.
-
KAPM02049-E
Not authorized object. ObjectName = aa...aa
[Action]
Not authorized object.
Take action according to the proceeding message.
aa...aa: Object name
-
KAPM02050-E
Host name is invalid.
[Action]
Host name is invalid.
Take action according to the proceeding message.
-
KAPM02051-E
Cannot connect to InterClient.
[Action]
Cannot connect to InterClient.
Take action according to the proceeding message.
-
KAPM02052-E
Cannot connect to InterBase.
[Action]
Cannot connect to InterBase.
Take action according to the proceeding message.
-
KAPM02053-E
SQLException occurred. Description = aa...aa
[Action]
SQLException occurred.
Take action according to the proceeding message.
aa...aa: Description
-
KAPM02054-E
Exception occurred. Description = aa...aa
[Action]
Exception occurred.
Take action according to the proceeding message.
aa...aa: Description
-
KAPM02055-E
CIMException occurred. Description = aa...aa
[Action]
CIMException occurred.
This message provides additional information. Check the other messages that were output around the same time, and then follow the instructions given in those messages.
aa...aa: Description
-
KAPM02056-E
A CIMClassNotFoundException occurred.
[Action]
A CIMClassNotFoundException occurred.
Take action according to the proceeding message.
-
KAPM02057-E
IOException occurred. Description = aa...aa
[Action]
IOException occurred.
Take action according to the proceeding message.
aa...aa: Description
-
KAPM02058-E
InterruptedException occurred. Description = aa...aa
[Action]
InterruptedException occurred.
Take action according to the proceeding message.
aa...aa: Description
-
KAPM02059-E
The time limit for establishing a connection is over.
[Action]
The time limit for establishing a connection is over.
Take action according to the proceeding message.
-
KAPM02060-E
An attempt to establish a connection has failed.
[Action]
An attempt to establish a connection has failed.
Take action according to the proceeding message.
-
KAPM02061-E
aa...aa
[Action]
Detailed information for KAPMxxxxx-E. This indicates the thrown exception object and the backtrace for that object.
See the message KAPMxxxxx-E.
aa...aa: Name of the exception object and the reason that object was thrown, or the backtrace for that object
-
KAPM02062-I
The get method changed the state to the standby state.
[Action]
The get method changed the state to the standby state.
-
KAPM02063-I
The createConnection method changed the state to the standby state.
[Action]
The createConnection method changed the state to the standby state.
-
KAPM02069-E
A time-over error occurred when connecting to the repository.
[Action]
A time-over error occurred when connecting to the repository.
If you are trying to log in, log in again. If you have already logged in, retry the operation.
-
KAPM02070-E
A CIMUnavailableDatabaseException occurred. Detailed message of exception = aa...aa
[Action]
A CIMUnavailableDatabaseException occurred.
Take action according to the proceeding message.
aa...aa: Detailed message of exception
-
KAPM02071-E
HiRDB is not running.
[Action]
HiRDB is not running.
Please start HiRDB.
-
KAPM02072-E
The password of a user connected to HiRDB is invalid. (user name = aa...aa)
[Action]
The password of a user connected to HiRDB is invalid.
Check the value of HiRDB.password in the user.conf file. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: User name
-
KAPM02073-E
The user name of a user connected to HiRDB is invalid. (user name = aa...aa)
[Action]
The user name of a user connected to HiRDB is invalid.
Check the value of HiRDB.user in the user.conf file. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: User name
-
KAPM02074-W
The table name registered into DBMS is changed. Before= aa...aa After = bb...bb
[Action]
The table name to be registered in the DBMS will be changed.
aa...aa: Before
bb...bb: After
-
KAPM02075-E
An attempt to set a connection to the factory has failed.
[Action]
An attempt to set a connection to the factory has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02076-I
Processing to initialize the connection pool was executed.
aa...aa: Initial value, bb...bb: Increment value, cc...cc: Maximum value, dd...dd: Keep-alive period, ee...ee: Timeout period, ff...ff: Number of retries, gg...gg: Retry interval
[Action]
Processing to initialize the connection pool was executed.
aa...aa: Initial value
bb...bb: Increment value
cc...cc: Maximum value
dd...dd: Keep-alive period
ee...ee: Timeout period
ff...ff: Number of retries
gg...gg: Retry interval
-
KAPM02077-E
An attempt to release the connection of the connection pool has failed.
[Action]
This message is displayed when an attempt to release the connection of the connection pool fails.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02078-E
A RepositoryException occurred. (details = aa...aa)
[Action]
This message is displayed when a RepositoryException occurs.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Details
-
KAPM02079-E
An attempt to release the JDBC connection has failed.
[Action]
This message is displayed when an attempt to release the JDBC connection fails.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02080-E
A CIMHeldRepositoryException has occurred. Exception message = aa...aa
[Action]
A CIMHeldRepositoryException has occurred.
Remove the cause of the HiRDB blockage, and then try again.
aa...aa: detailed message of exception
-
KAPM02081-E
A hcmdsDBUserManagementException has occurred. (exception message = aa...aa)
[Action]
A hcmdsDBUserManagementException has occurred.
Check the settings and the status of the HiRDB.
aa...aa: Exception message
-
KAPM02201-I
The method was invoked.
[Action]
The method was invoked.
-
KAPM02202-I
The following arguments were specified: aa...aa
[Action]
The following arguments were specified: aa...aa
aa...aa: Arguments
-
KAPM02203-I
External module processing has started. (module = aa...aa)
[Action]
External module processing has started.
aa...aa: Module
-
KAPM02204-I
External module processing has terminated. (module = aa...aa)
[Action]
External module processing has terminated.
aa...aa: Module
-
KAPM02210-E
The specified argument is null.
[Action]
The specified argument is null.
-
KAPM02211-E
The password is not set.
[Action]
The password is not set.
-
KAPM02212-E
Authentication has failed.
[Action]
Authentication has failed.
-
KAPM02213-E
An attempt to read the password file has failed.
[Action]
An attempt to read the password file has failed.
Confirm that you have read permissions for the following file.
In Windows: <Hitachi-Command- Suite-Common-Component-installation-folder>\conf\.hbaspass
In Solaris or Linux: /opt/HiCommand/Base/conf/.hbaspass
If you do not have read permissions, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM02214-E
An attempt to write to the password file has failed.
[Action]
An attempt to write to the password file has failed.
Make sure that you have write permissions for the following file.
In Windows: <Hitachi-Command-Suite-Common-Component-installation-folder>\conf\.hbaspass
In Solaris or Linux: /opt/HiCommand/Base/conf/.hbaspass
If you do not have write permissions, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM02215-E
The authenticated user does not have permission to execute the method.
[Action]
The authenticated user does not have permission to execute the method.
-
KAPM02216-E
The specified user was not found.
[Action]
The specified user was not found.
-
KAPM02217-E
The specified group was not found.
[Action]
The specified group was not found.
-
KAPM02218-E
The specified user already exists.
[Action]
The specified user already exists.
-
KAPM02219-E
The specified group already exists.
[Action]
The specified group already exists.
-
KAPM02220-E
The specified user is already registered in the group.
[Action]
The specified user is already registered in the group.
-
KAPM02221-E
hadmin cannot be registered in the group.
[Action]
hadmin cannot be registered in the group.
-
KAPM02222-E
An error occurred during user database access.
[Action]
An error occurred during user database access.
Confirm that the DBMS, HBase Storage Mgmt Web service, and HBase Storage Mgmt Common service are running. If they are running, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM02223-E
The specified mode is unsupported.
[Action]
The specified mode is unsupported.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02224-E
A fatal error occurred.
[Action]
A fatal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02225-E
The specified user cannot be deleted.
[Action]
The specified user cannot be deleted.
-
KAPM02226-E
The specified group cannot be deleted.
[Action]
The specified group cannot be deleted.
-
KAPM02227-E
The common repository is stopping.
[Action]
The common repository has stopped.
Make sure the DBMS has started.
-
KAPM02228-E
The user ID is not set.
[Action]
The user ID is not set.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02229-E
The specified user ID is invalid.
[Action]
The specified user ID is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02230-E
The specified password is invalid.
[Action]
The specified password is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02231-E
The application type is not set.
[Action]
The application type is not set.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02232-E
The resource group ID is not set.
[Action]
The resource group ID is not set.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02233-E
The specified application is not registered.
[Action]
The specified application is not registered.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02234-I
The permissions for aa...aa will now be changed. (User ID = aa...aa)
[Action]
The permissions for aa...aa will now be changed.
aa...aa: User ID
-
KAPM02235-I
The permissions for aa...aa were changed. (User ID = aa...aa)
[Action]
The permissions for aa...aa were changed.
aa...aa: User ID
-
KAPM02236-I
A user account will now be created. (User ID = aa...aa)
[Action]
A user account will now be created.
aa...aa: User ID
-
KAPM02237-I
The user account was created successfully. (User ID = aa...aa)
[Action]
The user account was created successfully.
aa...aa: User ID
-
KAPM02238-I
The user-account properties will now be changed. (aa...aa)
[Action]
The user account properties will now be changed.
aa...aa: Properties list before the change
-
KAPM02239-I
The user-account properties were changed. (aa...aa)
[Action]
The user account properties were changed.
aa...aa: Properties list after the change
-
KAPM02240-I
The resource-group properties will now be changed. (aa...aa)
[Action]
The resource group properties will now be changed.
aa...aa: Properties list before the change
-
KAPM02241-I
The resource-group properties were changed. (aa...aa)
[Action]
The resource group properties were changed.
aa...aa: Properties list after the change
-
KAPM02242-I
The allocation status of the resource group will now be changed. (aa...aa)
[Action]
The allocation status of the resource group will now be changed.
aa...aa: Allocation status before the change
-
KAPM02243-I
The allocation status of the resource group was changed. (aa...aa)
[Action]
The allocation status of the resource group was changed.
aa...aa: Allocation status after the change
-
KAPM02244-I
The password will now be changed. (User ID = aa...aa)
[Action]
The password will now be changed.
aa...aa: User ID
-
KAPM02245-I
The password was changed. (User ID = aa...aa)
[Action]
The password was changed.
aa...aa: User ID
-
KAPM02246-I
The user account will now be deleted. (User ID = aa...aa)
[Action]
The user account will now be deleted.
aa...aa: User ID
-
KAPM02247-I
The user account was deleted. (User ID = aa...aa)
[Action]
The user account was deleted.
aa...aa: User ID
-
KAPM02248-I
The resource group will now be deleted. (resource group ID = aa...aa, resource group name = bb...bb)
[Action]
The resource group will now be deleted.
aa...aa: Resource-group ID
bb...bb: Resource-group name
-
KAPM02249-I
The resource group was deleted. (resource group ID = aa...aa, resource group name = bb...bb)
[Action]
The resource group was deleted.
aa...aa: Resource-group ID
bb...bb: Resource-group name
-
KAPM02250-E
A resource group with the same name has already been registered. (resource group name = aa...aa)
[Action]
A resource group with the same name has already been registered.
aa...aa: Resource-group name
-
KAPM02251-E
A user account with the same user ID has already been registered. (User ID = aa...aa)
[Action]
A user account with the same user ID has already been registered.
aa...aa: User ID
-
KAPM02252-E
A resource group with the same ID has already been registered. (group ID = aa...aa)
[Action]
A resource group with the same ID has already been registered.
aa...aa: Group ID
-
KAPM02254-I
Request information: (API version = aa...aa, Command name = bb...bb, User ID or session ID = cc...cc)
[Action]
Request information.
aa...aa: API version
bb...bb: Command name
cc...cc: User ID or session ID
-
KAPM02255-E
The specified version is not supported. (version = aa...aa)
[Action]
The specified version is not supported.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: API version
-
KAPM02256-E
The specified command is not supported. (command = aa...aa)
[Action]
The specified command is not supported.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
-
KAPM02257-E
Authentication has failed. (user ID = aa...aa)
[Action]
Authentication has failed.
Make sure the combination of user ID and password is correct.
aa...aa: User ID
-
KAPM02258-I
Response information: (API version = aa...aa, Command name = bb...bb, Response status = cc...cc)
[Action]
Response information.
aa...aa: API version
bb...bb: Command name
cc...cc: Response status
-
KAPM02259-I
Response information when an error occurs: (Error code = aa...aa, Description = bb...bb)
[Action]
Response information when an error occurs.
aa...aa: Error code
bb...bb: Description
-
KAPM02260-E
An attempt to communicate with a server has failed. (URL = aa...aa)
[Action]
An attempt to communicate with a server has failed.
Make sure the HBase Storage Mgmt Common Service or the HBase Storage Mgmt Web Service of the server specified in the URL has started.
aa...aa: URL of the server
-
KAPM02261-E
An attempt to parse the response has failed.
[Action]
An attempt to parse the response has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02262-E
The request parameter is invalid.
[Action]
The request parameter is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02263-E
This user does not have execution permissions. (ID = aa...aa)
[Action]
This user does not have execution permissions.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Session ID
-
KAPM02269-E
The specified user was not found.
[Action]
The specified user was not found.
Another user might have deleted the specified user.
Refresh the display and make sure the selected user is registered.
-
KAPM02270-E
The same user ID already exists.
[Action]
The same user ID already exists.
Specify another user ID.
-
KAPM02271-E
An attempt to communicate with a database has failed.
[Action]
An attempt to communicate with a database has failed.
Make sure that HiRDB has started.
-
KAPM02272-E
An error occurred within the server.
[Action]
An error occurred within the server.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02273-I
The user will now be added. (ID = aa...aa, user ID = bb...bb)
[Action]
The user will now be added.
aa...aa: Session ID
bb...bb: User ID
-
KAPM02274-I
The user was added successfully. (ID = aa...aa, user ID = bb...bb)
[Action]
The user was added successfully.
aa...aa: Session ID
bb...bb: User ID
-
KAPM02275-I
The password will now be changed. (ID = aa...aa, user ID = bb...bb)
[Action]
The password will now be changed.
aa...aa: Session ID
bb...bb: User ID
-
KAPM02276-I
The password was changed successfully. (ID = aa...aa, user ID = bb...bb)
[Action]
The password was changed successfully.
aa...aa: Session ID
bb...bb: User ID
-
KAPM02277-I
The user profile will now be changed. (ID = aa...aa, user ID = bb...bb)
[Action]
The user profile will now be changed.
aa...aa: Session ID
bb...bb: User ID
-
KAPM02278-I
The user profile was changed successfully. (ID = aa...aa, user ID = bb...bb)
[Action]
The user profile was changed successfully.
aa...aa: Session ID
bb...bb: User ID
-
KAPM02279-I
The permissions will now be changed. (ID = aa...aa, user ID = bb...bb, permissions = cc...cc)
[Action]
The permissions will now be changed.
aa...aa: Session ID
bb...bb: User ID
cc...cc: Permissions after the change
-
KAPM02280-I
The permissions were changed successfully. (ID = aa...aa, user ID = bb...bb, permissions = cc...cc)
[Action]
The permissions were changed successfully.
aa...aa: Session ID
bb...bb: User ID
cc...cc: Permissions after the change
-
KAPM02281-I
The user will now be deleted. (ID = aa...aa, user ID = bb...bb)
[Action]
The user will now be deleted.
aa...aa: Session ID
bb...bb: User ID
-
KAPM02282-I
The user was deleted successfully. (ID = aa...aa, user ID = bb...bb)
[Action]
The user was deleted successfully.
aa...aa: Session ID
bb...bb: User ID
-
KAPM02283-E
The old password is incorrect. (ID = aa...aa, user ID = bb...bb)
[Action]
The old password is incorrect.
aa...aa: Session ID
bb...bb: User ID
-
KAPM02284-I
The user will now be locked. (ID = aa...aa, user ID = bb...bb)
[Action]
The user will now be locked.
aa...aa: Session ID
bb...bb: User ID
-
KAPM02285-I
The user was locked successfully. (ID = aa...aa, user ID = bb...bb)
[Action]
The user was locked successfully.
aa...aa: Session ID
bb...bb: User ID
-
KAPM02286-E
An attempt to lock the user has failed. aa...aa
[Action]
An attempt to lock the user has failed.
See the message that follows.
aa...aa: Detailed information
-
KAPM02287-I
The user will now be unlocked. (ID = aa...aa, user ID = bb...bb)
[Action]
The user will now be unlocked.
aa...aa: Session ID
bb...bb: User ID
-
KAPM02288-I
The user was unlocked successfully. (ID = aa...aa, user ID = bb...bb)
[Action]
The user was unlocked successfully.
aa...aa: Session ID
bb...bb: User ID
-
KAPM02289-E
An attempt to unlock the user has failed. aa...aa
[Action]
An attempt to unlock the user has failed.
See the Message of the next message.
aa...aa: Detailed information
-
KAPM02290-I
Authentication was successful. (user ID =aa...aa)
[Action]
Authentication was successful.
aa...aa: User ID
-
KAPM02291-W
Authentication has failed. aa...aa
[Action]
Authentication has failed.
aa...aa: Detailed information
-
KAPM02292-W
Authentication has failed for aa...aa times in a row, so the user (bb...bb) was locked.
[Action]
Authentication has failed for aa...aa times in a row, so the user (bb...bb) was locked.
aa...aa: Failure times
bb...bb: User ID
-
KAPM02294-E
The RD area of HBase is blocked.
[Action]
The RD area of HBase is blocked.
Remove the cause of the HiRDB blockage, and then try again.
-
KAPM02295-E
A distinguished name has not been set.
[Action]
A distinguished name has not been set.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02296-E
A domain name has not been set.
[Action]
A domain name has not been set.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02297-E
The specified distinguished name already exists. (distinguished name = aa...aa)
[Action]
The specified distinguished name already exists.
Specify a different distinguished name.
aa...aa: Distinguished name
-
KAPM02298-E
The specified distinguished name could not be found. (distinguished name = aa...aa)
[Action]
The specified distinguished name could not be found.
Another user might have already deleted the specified authorization group. Refresh the screen, and then check whether the specified authorization group is registered.
aa...aa: Distinguished name
-
KAPM02301-E
hcmds.home is not set in the Java system properties.
[Action]
hcmds.home is not set in the Java system properties.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02302-E
An error occurred during loading of a library.
[Action]
An error occurred during loading of a library.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02303-E
An attempt to acquire user information about a HiRDB-connected user has failed. error code = aa...aa
[Action]
An attempt to acquire user information about a HiRDB-connected user has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error code
-
KAPM02304-E
An attempt to set a system environment variable has failed. error code = aa...aa
[Action]
An attempt to set a system environment variable has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error code
-
KAPM02305-E
Attempts to set the system environment variables PDDIR and PATH have failed. error code = aa...aa
[Action]
Attempts to set the system environment variables PDDIR and PATH have failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error code
-
KAPM02306-E
An attempt to clear an HiRDB system environment variable has failed. error code = aa...aa
[Action]
An attempt to clear an HiRDB system environment variable has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error code
-
KAPM02307-E
The application type is required, but is not set.
[Action]
The application type is required, but is not set.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02401-E
An attempt to read the file failed. (path = aa...aa)
[Action]
An attempt to read the file failed.
Confirm that a file exists in the specified location.
aa...aa: Path
-
KAPM02409-E
A communication error occurred in an external authentication server. (error code = aa...aa)
[Action]
A communication error occurred in an external authentication server.
Perform one of the following procedures:
For LDAP:
1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network.
2. Use the hcmdsldapuser command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
3. If StartTLS is used, check the SSL settings.
4. If an OCSP is enabled, make sure that the certificate is valid.
5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
For RADIUS:
1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network.
2. Use the hcmdsradiussecret command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
3. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: error code
-
KAPM02410-W
Authentication with an external authentication server has failed. (user ID = aa...aa, host = bb...bb, port = cc...cc, protocol = dd...dd)
[Action]
The login user failed to be authenticated on the external authentication server.
Log in again using a valid user ID and password.
aa...aa: User ID
bb...bb: Host
cc...cc: Port
dd...dd: Protocol
-
KAPM02411-W
Authentication with an external authentication server has failed. The specified user was not found in the external authentication server. (user ID = aa...aa, host = bb...bb)
[Action]
The login user was not found in the external authentication server.
Log in again using a valid user ID and password.
aa...aa: User ID
bb...bb: Host
-
KAPM02412-E
A naming exception occurred. (host = aa...aa, port = bb...bb, protocol = cc...cc)
[Action]
A naming exception occurred.
Perform one of the following procedures:
For LDAP:
1. By using the host, port, and protocol set in "exauth.properties", check whether the authentication server can be accessed, the settings of the external authentication server, and the status of the network.
2. By using the hcmdsldapuser command, check that the information for the server names specified in the "auth.server.name" attribute in "exauth.properties" is registered.
3. If StartTLS is used, check the SSL settings.
4. If an OCSP is effective, check the following:
- Make sure the certificate is valid.
5. If you cannot resolve the problem, collect maintenance information, and then contact the Support Center.
For RADIUS:
1. By using the host, port, and protocol set in "exauth.properties", check whether the authentication server can be accessed, the settings of the external authentication server, and the status of the network.
2. By using the hcmdsradiussecret command, check that the information for the server names specified in the "auth.server.name" attribute in "exauth.properties" is registered.
3. If you cannot resolve the problem, collect maintenance information, and then contact the Support Center.
aa...aa: Host
bb...bb: Port
cc...cc: Protocol
-
KAPM02413-E
The negotiation for a TLS session has failed. (host = aa...aa, port = bb...bb, protocol = cc...cc)
[Action]
Negotiation for a TLS session has failed.
Perform one of the following procedures:
For LDAP:
1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network.
2. Use the hcmdsldapuser command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
3. If StartTLS is used, check the SSL settings.
4. If an OCSP is enabled, make sure that the certificate is valid.
5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
For RADIUS:
1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network.
2. Use the hcmdsradiussecret command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
3. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Host
bb...bb: Port
cc...cc: Protocol
-
KAPM02414-I
Authentication with an external authentication server was successful. (user ID = aa...aa, host = bb...bb, port = cc...cc, protocol = dd...dd)
[Action]
The login user was successfully authenticated on the external authentication server.
aa...aa: User ID
bb...bb: Host
cc...cc: Port
dd...dd: Protocol
-
KAPM02416-E
A communication error occurred in an external authentication server.
[Action]
A communication error occurred in an external authentication server.
Perform one of the following procedures:
For LDAP:
1. By using the host, port, and protocol set in "exauth.properties", check whether the authentication server can be accessed, the settings of the external authentication server, and the status of the network.
2. By using the hcmdsldapuser command, check that the information for the server names specified in the "auth.server.name" attribute in "exauth.properties" is registered.
3. If StartTLS is used, check the SSL settings.
4. If an OCSP is effective, check the following:
- Make sure the certificate is valid.
5. If you cannot resolve the problem, collect maintenance information, and then contact the Support Center.
For RADIUS:
1. By using the host, port, and protocol set in "exauth.properties", check whether the authentication server can be accessed, the settings of the external authentication server, and the status of the network.
2. By using the hcmdsradiussecret command, check that the information for the server names specified in the "auth.server.name" attribute in "exauth.properties" is registered.
3. If you cannot resolve the problem, collect maintenance information, and then contact the Support Center.
-
KAPM02417-E
Communication with an external authentication server has failed. (host = aa...aa, port = bb...bb, protocol = cc...cc)
[Action]
An attempt to communicate with the LDAP server has failed.
Perform one of the following procedures:
For LDAP:
1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network.
2. Use the hcmdsldapuser command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
3. If StartTLS is used, check the SSL settings.
4. If an OCSP is enabled, make sure that the certificate is valid.
5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
For RADIUS:
1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network.
2. Use the hcmdsradiussecret command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
3. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Host
bb...bb: Port
cc...cc: Protocol
-
KAPM02418-E
The LDAP service cannot be used. (host = aa...aa, port = bb...bb, protocol = cc...cc)
[Action]
The LDAP service cannot be used.
Perform one of the following procedures:
For LDAP:
1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network.
2. Use the hcmdsldapuser command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
3. If StartTLS is used, check the SSL settings.
4. If an OCSP is enabled, make sure that the certificate is valid.
5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
For RADIUS:
1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network.
2. Use the hcmdsradiussecret command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
3. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Host
bb...bb: Port
cc...cc: Protocol
-
KAPM02419-W
Only local operation is available because the attempt to read the configuration file for the external authentication server has failed.
[Action]
Only local operation is available because the attempt to read the configuration file for the external authentication server has failed.
Review the settings in the configuration file for the external authentication server.
-
KAPM02422-W
A parameter in the exauth.properties file contains an invalid value (aa...aa = bb...bb). The default value (cc...cc) will be used.
[Action]
The exauth.properties file (configuration file for the external authentication server) contains an invalid parameter file.
Review the settings in the configuration file for the external authentication server.
aa...aa: Parameter name
bb...bb: Parameter value
cc...cc: Default value
-
KAPM02423-E
Authentication of the search user has failed. (host = aa...aa)
[Action]
Authentication of the search user at the LDAP server has failed.
Use the hcmdsldapuser command to register the access user in the external authentication server. If the user has already been registered, check the settings for that user.
aa...aa: Host
-
KAPM02424-E
An error occurred in the external authentication server.
[Action]
An error occurred in the LDAP server.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02425-E
A parameter was not specified. (parameter = aa...aa)
[Action]
A parameter is not specified in the configuration file for the external authentication server.
Review the settings in the configuration file for the external authentication server.
aa...aa: Parameter name
-
KAPM02426-E
Authentication stopped because a setting in the configuration file for the external authentication server was invalid.
[Action]
Authentication stopped because a setting in the configuration file for the external authentication server was invalid.
Review the settings in the configuration file for the external authentication server.
-
KAPM02427-E
An invalid character was specified in the URL for a host name or a port number. (host = aa...aa, port = bb...bb)
[Action]
A URL for a host name or a port number, specified in the configuration file for the external authentication server, contains invalid characters.
Review the settings in the configuration file for the external authentication server.
aa...aa: Host
bb...bb: Port
-
KAPM02429-I
A RADIUS packet has been received. (packet information = aa...aa)
[Action]
A RADIUS packet has been received.
aa...aa: Packet information
-
KAPM02430-E
Verification of a RADIUS packet has failed. (host = aa...aa, port = bb...bb, protocol = cc...cc, cause = dd...dd)
[Action]
Verification of a RADIUS packet has failed.
aa...aa: Host
bb...bb: Port
cc...cc: Protocol
dd...dd: Cause of failure
-
KAPM02431-E
The connection to an external authentication server has timed out. (host = aa...aa, port = bb...bb, protocol = cc...cc)
[Action]
The connection to an external authentication server has timed out.
Perform one of the following procedures:
For LDAP:
1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network.
2. Use the hcmdsldapuser command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
3. If StartTLS is used, check the SSL settings.
4. If an OCSP is enabled, make sure that the certificate is valid.
5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
For RADIUS:
1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network.
2. Use the hcmdsradiussecret command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
3. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Host
bb...bb: Port
cc...cc: Protocol
-
KAPM02432-E
SSL-encrypted communication with the external authentication server has failed. (host = aa...aa, port = bb...bb, protocol = cc...cc)
[Action]
SSL-encrypted communication with the external authentication server has failed.
Perform one of the following procedures:
For LDAP:
1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network.
2. Use the hcmdsldapuser command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
3. If StartTLS is used, check the SSL settings.
4. If an OCSP is enabled, make sure that the certificate is valid.
5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
For RADIUS:
1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network.
2. Use the hcmdsradiussecret command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
3. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Host
bb...bb: Port
cc...cc: Protocol
-
KAPM02434-W
The lock processing was interrupted.
[Action]
The lock processing was interrupted.
Make a selection such that at least one user has the User Management permission.
-
KAPM02435-W
If the selected user accounts are locked, no more users will have the User Management permission.
[Action]
If the selected user accounts are locked, no more users will have the User Management permission.
Make a selection such that at least one user has the User Management permission.
-
KAPM02436-E
Determination of whether lock processing was performed has failed.
[Action]
Determination of whether lock processing was performed has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02450-I
Authentication by an external authentication server was successful. (server type = aa...aa, host = bb...bb)
[Action]
This audit log data indicates that login was successful.
aa...aa: Server type
bb...bb: Host
-
KAPM02451-W
Authentication by an external authentication server has failed. (server type = aa...aa, host = bb...bb)
[Action]
This audit log data indicates that login has failed.
aa...aa: Server type
bb...bb: Host
-
KAPM02452-I
A user's authentication method has been successfully changed. (authentication method = aa...aa, user ID = bb...bb)
[Action]
This audit log data indicates that a user's authentication method has been successfully changed.
aa...aa: Authentication method
bb...bb: User ID
-
KAPM02453-E
An attempt to change a user's authentication method has failed. (authentication method = aa...aa, user ID = bb...bb)
[Action]
This audit log data indicates that an attempt to change a user's authentication method has failed.
aa...aa: Authentication method
bb...bb: User ID
-
KAPM02454-E
Acquisition of SRV records failed. (domain name = aa...aa, protocol = bb...bb)
[Action]
Acquisition of SRV records failed.
Make sure that SRV records have been defined on the DNS server.
aa...aa: Domain name
bb...bb: Protocol
-
KAPM02455-E
A domain has been removed from the domain list because the acquisition of SRV records failed. (domain name = aa...aa)
[Action]
A domain has been removed from the domain list because the acquisition of SRV records failed.
Make sure that SRV records have been defined on the DNS server.
aa...aa: Domain name
-
KAPM02456-E
A function cannot be used because group mapping is disabled. (function name = aa...aa)
[Action]
A function cannot be used because group mapping is disabled.
Revise the settings in the configuration file for the external authentication server (exauth.properties).
aa...aa: Function name
-
KAPM02457-E
Acquisition of the password file failed.
[Action]
Acquisition of the password file failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02458-E
A setting in the configuration file for the external authentication server (exauth.properties) is invalid.
[Action]
A setting in the configuration file for the external authentication server (exauth.properties) is invalid.
Revise the settings in the configuration file for the external authentication server (exauth.properties).
-
KAPM02459-E
The domain cannot be linked to. (domain name = aa...aa)
[Action]
The domain cannot be linked to.
Use a domain that can be linked to.
aa...aa: Domain name
-
KAPM02460-E
The specified instance is invalid.
[Action]
The specified instance is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02461-E
No device type has been specified.
[Action]
No device type has been specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02462-E
The specified device type is too long. (device type = aa...aa)
[Action]
The specified device type is too long.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Device type
-
KAPM02463-E
The specified device type includes non-alphanumeric characters. (device type = aa...aa)
[Action]
The specified device type includes non-alphanumeric characters.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Device type
-
KAPM02464-E
No device number has been specified.
[Action]
No device number has been specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02465-E
The specified device number is too long. (device number = aa...aa)
[Action]
The specified device number is too long.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Device number
-
KAPM02466-E
The specified device number includes non-alphanumeric characters. (device number = aa...aa)
[Action]
The specified device number includes non-alphanumeric characters.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Device number
-
KAPM02467-E
The specified description is too long. (description = aa...aa)
[Action]
The specified description is too long.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Description
-
KAPM02468-E
The specified ID is too long. (ID = aa...aa)
[Action]
The specified ID is too long.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: ID
-
KAPM02469-E
The specified display name is too long. (display name = aa...aa)
[Action]
The specified display name is too long.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Display name
-
KAPM02470-E
No application has been specified.
[Action]
No application has been specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02471-E
No authorization information is specified for the user group.
[Action]
No authorization information is specified for the user group.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02472-E
A resource group has been specified for the authorization information.
[Action]
A resource group has been specified for the authorization information.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02473-E
A role has been specified for the authorization information.
[Action]
A role has been specified for the authorization information.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02474-E
No display name has been specified.
[Action]
No display name has been specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02475-E
The specified resource group was not found. (resource group ID = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
The specified resource group was not found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Resource group ID
bb...bb: Device type
cc...cc: Device number
-
KAPM02476-E
The specified user group was not found. (user group ID = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
The specified user group was not found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Resource group ID
bb...bb: Device type
cc...cc: Device number
-
KAPM02477-E
A user group with the same ID is already registered. (user group ID = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
A user group with the same ID is already registered.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Resource group ID
bb...bb: Device type
cc...cc: Device number
-
KAPM02478-E
No ID has been specified.
[Action]
No ID has been specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02479-E
An empty string has been specified for the ID.
[Action]
An empty string has been specified for the ID.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02480-W
The specified application is not registered. (application type = aa...aa)
[Action]
The specified application is not registered.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Application type
-
KAPM02481-E
An application not compatible with the function was specified. (application type = aa...aa, function name = bb...bb)
[Action]
An application not compatible with the function was specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Application type
bb...bb: Function name
-
KAPM02482-E
The method cannot be used. (class name = aa...aa, method name = bb...bb)
[Action]
The method cannot be used.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Class name
bb...bb: Method name
-
KAPM02483-W
Invalid authentication information has been registered. (application type = aa...aa)
[Action]
Invalid authentication information has been registered.
Use the hcmdsintg command to delete the invalid authentication information.
aa...aa: Application type
-
KAPM02484-E
The specified user account is not registered. (user ID = aa...aa)
[Action]
The specified user account is not registered.
Make sure that a user account is registered.
aa...aa: User ID
-
KAPM02485-E
The specified role was not found. (role ID = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
The specified role was not found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Role ID
bb...bb: Device type
cc...cc: Device number
-
KAPM02486-E
A role with the same ID has already been registered. (role ID = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
A role with the same ID has already been registered.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Role ID
bb...bb: Device type
cc...cc: Device number
-
KAPM02487-E
The same role name has already been registered. (role name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
The same role name has already been registered.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Role name
bb...bb: Device type
cc...cc: Device number
-
KAPM02488-E
The specified permission was not found. (permission = aa...aa, application type = bb...bb)
[Action]
The specified permission was not found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Permission name
bb...bb: Application type
-
KAPM02489-E
Encoding failed. (character string = aa...aa)
[Action]
Encoding failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Character string
-
KAPM02490-E
An attempt to read the BuiltInUserGroup.properties file failed.
[Action]
An attempt to read the BuiltInUserGroup.properties file failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02491-E
A user group with the same name is already registered. (user group name = aa...aa)
[Action]
A user group with the same name is already registered.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: User group name
-
KAPM02492-E
The specified user group was not found. (user group name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
The specified user group was not found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: User group name
bb...bb: Device type
cc...cc: Device number
-
KAPM02493-E
Multiple resource groups contain the same data. (class = aa...aa, data = bb...bb)
[Action]
Multiple resource groups contain the same data.
To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Class
bb...bb: Data
-
KAPM02494-E
The specified resource group was not found. (resource group name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
The specified resource group was not found.
To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Resource group name
bb...bb: Device type
cc...cc: Device number
-
KAPM02502-E
Please enter a password that satisfies the following conditions:
A minimum of aa...aa upper-case characters.
A minimum of bb...bb lower-case characters.
A minimum of cc...cc numerals.
A minimum of dd...dd symbols.
Different from the user ID.
[Action]
Please enter a password that satisfies the following conditions:
A minimum of aa...aa upper-case characters.
A minimum of bb...bb lower-case characters.
A minimum of cc...cc numerals.
A minimum of dd...dd symbols.
Different from the user ID.
Enter an appropriate value according to the error message.
aa...aa: the minimum number of characters
bb...bb: the minimum number of characters
cc...cc: the minimum number of characters
dd...dd: the minimum number of characters
-
KAPM02503-E
A minimum of aa...aa upper-case characters.
[Action]
A minimum of aa...aa upper-case characters.
Enter an appropriate value according to the error message.
aa...aa:the minimum number of characters
-
KAPM02504-E
A minimum of aa...aa lower-case characters.
[Action]
A minimum of aa...aa lower-case characters.
Enter an appropriate value according to the error message.
aa...aa:the minimum number of characters
-
KAPM02505-E
A minimum of aa...aa numerals.
[Action]
A minimum of aa...aa numerals.
Enter an appropriate value according to the error message.
aa...aa:the minimum number of characters
-
KAPM02506-E
A minimum of aa...aa symbols.
[Action]
A minimum of aa...aa symbols.
Enter an appropriate value according to the error message.
aa...aa:the minimum number of characters
-
KAPM02507-E
Different from the user ID.
[Action]
Different from the user ID.
Enter an appropriate value according to the error message.
-
KAPM02508-E
Enter a value that is exactly aa...aa characters long.
[Action]
Enter a value that is exactly aa...aa characters long.
Enter an appropriate value according to the error message.
aa...aa:the maximum number of characters
-
KAPM02509-E
The following characters can be used for the value:
A-Z a-z 0-9 # + - . @ _
[Action]
The following characters can be used for the value:
A-Z a-z 0-9 # + - . @ _
Enter an appropriate value according to the error message.
-
KAPM02510-I
Authentication by using a KDC was successful. (Kerberos principal = aa...aa, KDC = bb...bb)
[Action]
Authentication by using a KDC was successful.
aa...aa: Kerberos principal name
bb...bb: KDC
-
KAPM02511-E
Communication with KDC failed. (KDC = aa...aa)
[Action]
Communication with KDC failed.
Make sure the specified KDC is correct.
aa...aa: KDC
-
KAPM02512-E
Resolution of the KDC host name failed. (KDC = aa...aa)
[Action]
Resolution of the KDC host name failed.
Perform one of the following procedures:
- Make sure the specified KDC is correct.
- Make sure the specified host name in the KDC is registered in the DNS server.
aa...aa: KDC
-
KAPM02513-W
Authentication by using a KDC failed. (Kerberos principal = aa...aa, KDC = bb...bb)
[Action]
Authentication by using a KDC failed.
aa...aa: Kerberos principal name
bb...bb: KDC
-
KAPM02514-I
The krb5.conf file, used for internal processing, was successfully deleted. (file name = aa...aa)
[Action]
The krb5.conf file, used for internal processing, was successfully deleted.
aa...aa: File name
-
KAPM02515-W
Deletion of the krb5.conf file, used for internal processing, failed. (file name = aa...aa)
[Action]
Deletion of the krb5.conf file, used for internal processing, was successful.
aa...aa: File name
-
KAPM02516-I
The krb5.conf file, used for internal processing, was successfully created. (file name = aa...aa)
[Action]
The krb5.conf file, used for internal processing, was successfully created.
aa...aa: File name
-
KAPM02517-E
Creation of the krb5.conf file, used for internal processing, failed. (file name = aa...aa)
[Action]
Creation of the krb5.conf file, used for internal processing, failed.
Make sure you have the necessary permissions to create the file on the specified path.
aa...aa: File name
-
KAPM02518-I
A request to acquire SRV records was sent. (record key = aa...aa)
[Action]
A request to acquire SRV records was sent.
aa...aa: SRV record key
-
KAPM02519-E
Communication with the DNS server failed.
[Action]
Communication with the DNS server failed.
Make sure the DNS server settings in the OS are correct. Make sure the status of the network connected with the DNS server is normal.
-
KAPM02520-E
The Kerberos authentication settings are invalid.
[Action]
The Kerberos authentication settings are invalid.
Revise the Kerberos authentication settings in the exauth.properties file or the search user definition.
-
KAPM02521-E
The Kerberos realm or KDC definition is invalid. (realm name = aa...aa)
[Action]
The Kerberos realm or KDC definition is invalid.
Check and, if necessary, revise the exauth.properties file realm or the KDC definition.
aa...aa: Realm name
-
KAPM02522-W
The SRV records are undefined. (record key = aa...aa)
[Action]
The SRV records are undefined.
aa...aa: SRV record key
-
KAPM02523-I
Acquisition of the SRV records was successful. (SRV record = aa...aa)
[Action]
Acquisition of the SRV records was successful.
aa...aa: SRV record
-
KAPM02524-E
Acquisition of the SRV records failed. (record key = aa...aa)
[Action]
Acquisition of the SRV records failed.
Make sure that the SRV records are defined on the DNS server.
aa...aa: SRV record key
-
KAPM02525-E
An error occurred on the DNS server.
[Action]
An error occurred on the DNS server.
Check the operation status of the DNS server.
-
KAPM02526-I
Processing to identify the user account will now start. (user ID = aa...aa, server type = bb...bb)
[Action]
Processing to identify the user account will now start.
aa...aa: User ID
bb...bb: Server type
-
KAPM02527-I
The user account was found. (user ID = aa...aa, internal = bb...bb)
[Action]
The user account was found.
aa...aa: User ID
bb...bb: Boolean value that shows whether an external authentication server is used
-
KAPM02528-I
The user account was not found. (user ID = aa...aa)
[Action]
The user account was not found.
aa...aa: User ID
-
KAPM02529-I
The user account was identified. (user ID = aa...aa, external = bb...bb, Kerberos user = cc...cc, Kerberos realm = dd...dd)
[Action]
The user account was identified.
aa...aa: User ID
bb...bb: Boolean value that shows whether an external authentication server is used
cc...cc: Kerberos user name
dd...dd: Kerberos realm name
-
KAPM02551-E
The following characters can be used for the value: aa...aa
[Action]
The following characters can be used for the value.
Enter an appropriate value according to the error message.
aa...aa: Value
-
KAPM02552-W
An invalid permission is registered. (application type = aa...aa)
[Action]
An invalid permission is registered.
Use the hcmdsintg command to delete the invalid authentication data.
aa...aa: Application type
-
KAPM02603-E
The resource group already exists. (resource group name = aa...aa)
[Action]
The resource group aa...aa already exists.
Check the resource group name, and then change it to a name that differs from the others.
aa...aa: Resource group name
-
KAPM02604-E
An HcmdsInvalidOperationException occurred.
[Action]
Settings for adding a user are invalid.
Make sure that the settings for adding users are valid.
-
KAPM02605-E
An HcmdsAuthorizationException occurred.
[Action]
The logged in user does not have the required permissions to add users.
Add users by using an account that has the required permissions.
-
KAPM02606-E
An HcmdsUserManagementException occurred.
[Action]
A problem occurred while adding a user.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02607-E
Make sure that the users can be added.
[Action]
Make sure that the users can be added.
Make sure that the users can be added.
-
KAPM02615-E
An HSSOException occurred.
[Action]
An HSSOException occurred.
Make sure that the repository is running. If you cannot, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM02616-E
An IOException occurred.
[Action]
An IOException occurred.
Confirm that the file I/Os are valid. If that cannot be confirmed, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM02617-E
A CIMException occurred.
[Action]
A CIMException occurred.
Make sure that the access method for the repository is correct. If you cannot, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM02618-E
A CIMUnavailableDatabaseException occurred.
[Action]
A CIMUnavailableDatabaseException occurred.
Make sure that the connection to the repository is correct. If you cannot, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM02620-E
The resource group was not found.
[Action]
The resource group was not found.
-
KAPM02625-E
The specified software definition aa...aa was not found.
[Action]
The specified software definition aa...aa was not found.
aa...aa: Application name
-
KAPM02630-I
A resource group has been created. (login ID = aa...aa, resource group name = bb...bb, module name = cc...cc)
[Action]
A resource group has been created. (login ID = aa...aa, resource group name = bb...bb, module name = cc...cc)
aa...aa: Login ID
bb...bb: Resource group name
cc...cc: Module name
-
KAPM02631-I
A resource group has been deleted. (login ID = aa...aa, resource group ID = bb...bb, module name = cc...cc)
[Action]
A resource group has been deleted. (login ID =aa...aa, resource group ID = bb...bb, module name = cc...cc)
aa...aa: Login ID
bb...bb: Resource group ID
cc...cc: Module name
-
KAPM02632-I
A resource has been added. (login ID = aa...aa, resource group ID = bb...bb, module name = cc...cc)
[Action]
A resource has been added. (login ID = aa...aa, resource group ID = bb...bb, module name = cc...cc)
aa...aa: Login ID
bb...bb: Resource group ID
cc...cc: Module name
-
KAPM02633-I
A resource has been removed. (login ID = aa...aa, resource group ID = bb...bb, module name = cc...cc)
[Action]
A resource has been removed. (login ID = aa...aa, resource group ID = bb...bb, module name = cc...cc)
aa...aa: Login ID
bb...bb: Resource group ID
cc...cc: Module name
-
KAPM02634-I
A resource group property has been edited. (login ID = aa...aa, resource group ID = bb...bb, module name = cc...cc)
[Action]
A resource group property has been edited. (login ID = aa...aa, resource group ID = bb...bb, module name = cc...cc)
aa...aa: Login ID
bb...bb: Resource group ID
cc...cc: Module name
-
KAPM02635-E
Creation of a resource group has failed. (login ID = aa...aa, resource group name = bb...bb, module name = cc...cc)
[Action]
Creation of a resource group has failed. (login ID =aa...aa, resource group ID = bb...bb, module name = cc...cc)
aa...aa: Login ID
bb...bb: Resource group name
cc...cc: Module name
-
KAPM02636-E
Deletion of a resource group has failed. (login ID = aa...aa, resource group ID = bb...bb, module name = cc...cc)
[Action]
Deletion of a resource group has failed. (login ID = aa...aa, resource group ID = bb...bb, module name = cc...cc)
aa...aa: Login ID
bb...bb: Resource group ID
cc...cc: Module name
-
KAPM02637-E
Addition of a resource has failed. (login ID = aa...aa, resource group ID = bb...bb, module name = cc...cc)
[Action]
Addition of a resource has failed. (login ID =aa...aa, resource group ID = bb...bb, module name = cc...cc)
aa...aa: Login ID
bb...bb: Resource group ID
cc...cc: Module name
-
KAPM02638-E
Removal of a resource has failed. (login ID = aa...aa, resource group ID = bb...bb, module name = cc...cc)
[Action]
Removal of a resource has failed. (login ID = aa...aa, resource group ID = bb...bb, module name = cc...cc)
aa...aa: Login ID
bb...bb: Resource group ID
cc...cc: Module name
-
KAPM02639-E
An attempt to edit a resource group property has failed. (login ID = aa...aa, resource group ID = bb...bb, module name = cc...cc)
[Action]
An attempt to edit a resource group property has failed. (login ID = aa...aa, resource group ID = bb...bb, module name = cc...cc)
aa...aa: Login ID
bb...bb: Resource group ID
cc...cc: Module name
-
KAPM02650-I
A parameter has been sent. (HSSO token = aa...aa, application name = bb...bb)
[Action]
A parameter has been sent. (HSSO token = aa...aa, application name = bb...bb)
aa...aa: HSSO token
bb...bb: Application name
-
KAPM02651-I
The software definition aa...aa does not exist.
[Action]
The specified software definition aa...aa does not exist in the repository.
aa...aa: Application name
-
KAPM02652-I
aa...aa is not associated with a resource bundle.
[Action]
aa...aa is not associated with a resource bundle.
aa...aa: Application name
-
KAPM02654-E
A ResourceTabHandleException occurred.
[Action]
A ResourceTabHandleException occurred.
Check and, if necessary, revise the registered software definitions and resource bundles.
-
KAPM02656-I
A parameter has been sent. (HSSO token = aa...aa, application name = bb...bb, resource group ID = cc...cc, resource group name = dd...dd)
[Action]
A parameter has been sent. (HSSO token = aa...aa, application name = bb...bb, resource group ID = cc...cc, resource group name = dd...dd)
aa...aa: HSSO token
bb...bb: Application name
cc...cc: Resource group ID
dd...dd: Resource group name
-
KAPM02659-I
No users that can be added exist.
[Action]
No users that can be added exist.
-
KAPM02660-I
A user has been added successfully. (resource group name = aa...aa, user name = bb...bb)
[Action]
A user has been added successfully. (resource group name = aa...aa, user name = bb...bb)
aa...aa: Resource group name
bb...bb: User name
-
KAPM02661-I
A user has been removed successfully. (resource group name = aa...aa, user name = bb...bb)
[Action]
A user has been removed successfully. (resource group name = aa...aa, user name = bb...bb)
aa...aa: Resource group name
bb...bb: User name
-
KAPM02670-I
A resource group has been created.
[Action]
A resource group has been created.
-
KAPM02671-I
A resource group has been deleted.
[Action]
A resource group has been deleted.
-
KAPM02672-I
A resource has been added.
[Action]
A resource has been added.
-
KAPM02674-I
A resource group property has been edited.
[Action]
A resource group property has been edited.
-
KAPM02675-E
Creation of a resource group has failed.
[Action]
Creation of a resource group has failed.
-
KAPM02676-E
Deletion of a resource group has failed.
[Action]
Deletion of a resource group has failed.
-
KAPM02677-E
Addition of a resource has failed.
[Action]
Addition of a resource has failed.
-
KAPM02679-E
An attempt to edit a resource group property has failed.
[Action]
An attempt to edit a resource group property has failed.
-
KAPM02704-W
An invalid RUAccessPoint object was created. Addition to the launch list is not performed. Name=aa...aa, URL=bb...bb, TokenVersion=cc...cc, IconUrl=dd...dd, IconMsg=ee...ee
[Action]
An invalid RUAccessPoint object was created. Addition to the launch list is not performed.
aa...aa: Name
bb...bb: URL
cc...cc: Token version
dd...dd: Icon URL
ee...ee: Icon message
-
KAPM02705-E
CIMException occurred. The processing that acquires RUAccessPoint will now be interrupted.
[Action]
CIMException occurred. The processing that acquires RUAccessPoint will now be interrupted.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02706-E
The URL format is failed. URL=aa...aa
[Action]
The URL format is failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: URL
-
KAPM02801-I
[SQL]: aa...aa
[Action]
An SQL statement was executed.
Take action according to the proceeding message.
aa...aa: Execution SQL statement
-
KAPM02802-E
A HcmdsExecException occurred. Message=aa...aa, Reason=bb...bb
[Action]
A HcmdsExecException occurred.
Take action according to the proceeding message.
aa...aa: Message
bb...bb: Reason
-
KAPM02803-E
Option is invalid.
[Action]
Option is invalid.
Check the options.
-
KAPM02804-E
A Exception occurred. Message=aa...aa
[Action]
A Exception occurred.
Take action according to the proceeding message.
aa...aa: Message
-
KAPM02805-E
[Stack Trace]:aa...aa
[Action]
A stack trace will be output.
Take action according to the proceeding message.
aa...aa: Stack trace
-
KAPM02806-E
A FileNotFoundException occurred.
[Action]
A FileNotFoundException occurred.
Confirm that a file exists in the specified location.
-
KAPM02807-E
A IOException occurred.
[Action]
A IOException occurred.
Take action according to the proceeding message.
-
KAPM02809-E
A SQLException occurred. Message=aa...aa
[Action]
A SQLException occurred.
Take action according to the proceeding message.
aa...aa: Message
-
KAPM02810-E
An EXECUPDATE statement failed. Execution SQL statement = aa...aa
[Action]
An EXECUPDATE statement failed.
Take action according to the proceeding message.
aa...aa: Execution SQL statement
-
KAPM02811-E
A ClassNotFoundException occurred.
[Action]
A ClassNotFoundException occurred.
Take action according to the proceeding message.
-
KAPM02812-E
A SQL statement failed. Message=aa...aa, Reason=bb...bb
[Action]
A SQL statement failed.
Take action according to the proceeding message.
aa...aa: Message
bb...bb: Reason
-
KAPM02813-E
An EXECQUERY statement failed. Execution SQL statement = aa...aa
[Action]
An EXECQUERY statement failed.
Take action according to the proceeding message.
aa...aa: Execution SQL statement
-
KAPM02814-E
A SQLException occurred.
[Action]
A SQLException occurred.
Take action according to the proceeding message.
-
KAPM02815-E
File is not found. file-name = aa...aa
[Action]
File is not found.
Confirm that a file exists in the specified location.
aa...aa: File name
-
KAPM02816-I
Record No.: aa...aa
[Action]
Displays the record number.
aa...aa: Record number
-
KAPM02817-I
Column count: aa...aa
[Action]
Displays the number of columns.
aa...aa: Number of columns
-
KAPM02818-I
aa...aa: bb...bb
[Action]
Displays the column name and value.
aa...aa: Column name
bb...bb: Value
-
KAPM02891-E
DB is not found.
[Action]
Database is not found.
Check the value of DATABASE.path in the configuration file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris or Linux : /opt/HiCommand/Base/conf/user.conf
-
KAPM02892-E
User name or password is invalid.
[Action]
User name or password is invalid.
Check the value of DATABASE.user and DATABASE.password in the configuration file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris or Linux : /opt/HiCommand/Base/conf/user.conf
-
KAPM02893-E
The host name is invalid.
[Action]
The host name is invalid.
Check the value of DATABASE.hostname in the configuration file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris or Linux : /opt/HiCommand/Base/conf/user.conf
-
KAPM02894-E
No suitable driver exists.
[Action]
No suitable driver exists.
Check the value of DATABASE.type in the configuration file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris or Linux : /opt/HiCommand/Base/conf/user.conf
-
KAPM02895-E
A connection to InterClient could not be established.
[Action]
A connection to InterClient could not be established.
Confirm that the InterClient service is running.
-
KAPM02896-E
A connection to InterBase could not be established.
[Action]
A connection to InterBase could not be established.
Confirm that the InterBase service is running.
-
KAPM02899-E
Fatal error.
[Action]
Processing continuation is impossible.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02901-I
[Trace]: aa...aa
[Action]
A trace message will be output.
- Read legacy record.
- Order of hcmdsID change from x to 0.
- Change legacy record.
- Update CIMClient From 01-00 to 01-01
- Already update.
- Update DB Version.
- Create TNB_Classes.
- Create TNB_ClassAttribute.
- Drop TNB_SERVICEACCESSBYSAP.
- Drop TNB_SOFTWAREFEATURESERVICEIMPL.
- Drop CIMClasses.
- Succeed in update DataBase.
aa...aa: Trace message
-
KAPM02902-E
A ClassNotFoundException occurred.
[Action]
A ClassNotFoundException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02903-E
A HcmdsUpdateException occurred. Message = aa...aa, Reason = bb...bb
[Action]
A HcmdsUpdateException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Message
bb...bb: Reason
-
KAPM02904-E
An option is invalid.
[Action]
An option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM02905-E
An exception occurred. Message = aa...aa
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Message
-
KAPM02906-E
[Stack Trace]: aa...aa
[Action]
A stack trace is output.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Stack trace
-
KAPM02907-E
A SQLException occurred. Message = aa...aa
[Action]
A SQLException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Message
-
KAPM02910-E
A SELECT statement failed. Table name = aa...aa
[Action]
A SELECT statement failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Table name
-
KAPM02911-E
An ALTER statement failed. Table name = aa...aa
[Action]
An ALTER statement failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Table name
-
KAPM02912-E
A DROP statement failed. Table name = aa...aa
[Action]
A DROP statement failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Table name
-
KAPM02913-E
An UPDATE statement failed. Table name = aa...aa
[Action]
An UPDATE statement failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Table name
-
KAPM02914-E
An EXECUPDATE statement failed. Execution SQL statement = aa...aa
[Action]
An EXECUPDATE statement failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Execution SQL statement
-
KAPM02980-I
Update CIMClient from 01-00 to 01-01.
[Action]
Update CIMClient from 01-00 to 01-01.
-
KAPM02981-I
The database has already been updated.
[Action]
The database has already been updated.
-
KAPM02982-I
The database was successfully updated.
[Action]
The database was successfully updated.
-
KAPM02991-E
DB is not found.
[Action]
Database is not found.
Check the value of DATABASE.path in the configuration file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris or Linux : /opt/HiCommand/Base/conf/user.conf
-
KAPM02992-E
User name or password is invalid.
[Action]
User name or password is invalid.
Check the value of DATABASE.user and DATABASE.password in the configuration file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris or Linux : /opt/HiCommand/Base/conf/user.conf
-
KAPM02993-E
The host name is invalid.
[Action]
The host name is invalid.
Check the value of DATABASE.hostname in the configuration file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris or Linux : /opt/HiCommand/Base/conf/user.conf
-
KAPM02994-E
No suitable driver exists.
[Action]
No suitable driver exists.
Check the value of DATABASE.type in the configuration file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris or Linux : /opt/HiCommand/Base/conf/user.conf
-
KAPM02995-E
A connection to InterClient could not be established.
[Action]
A connection to InterClient could not be established.
Confirm that the InterClient service is running.
-
KAPM02996-E
A connection to InterBase could not be established.
[Action]
A connection to InterBase could not be established.
Confirm that the InterBase service is running.
-
KAPM02999-E
Fatal error.
[Action]
Fatal error occurred.
Take action according to the proceeding message.
-
KAPM03001-E
Illegal parameters have been specified to create HSSO Context.
[Action]
Illegal parameters have been specified to create HSSO Context.
Specify the correct user ID and password.
-
KAPM03004-E
An error occurred on the HSSO Server.
[Action]
An error occurred on the HSSO server.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03005-E
An error occurred when CIM Client was created.
[Action]
An error occurred when CIM Client was created.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03006-E
An unexpected error occurred.
[Action]
An unexpected error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03007-E
A frame-enabled browser is required.
[Action]
A frame-enabled browser is required.
Use Internet Explorer 5.5 later or Netscape 6 later.
-
KAPM03026-E
A CIMException was generated during Console screen display processing.
[Action]
A CIMException was generated during Console screen display processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03050-E
The parameter sent from the JP1/IM-View is invalid.
[Action]
The parameter sent from the JP1/IM-View is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03051-E
The Launchurl is invalid.
[Action]
The Launchurl is invalid.
-
KAPM03052-E
The JP1user ID is invalid.
[Action]
The JP1user ID is invalid.
-
KAPM03053-E
The JP1token is invalid.
[Action]
The JP1token is invalid.
-
KAPM03054-E
An acquisition failure occurred in RequestDispatcher.
[Action]
An acquisition failure occurred in RequestDispatcher.
-
KAPM03055-E
A JavaScript-enabled browser is required.
[Action]
A JavaScript-enabled browser is required.
Use a browser that can use JavaScript. Alternatively, change the setting of the browser to use JavaScript if the use of script is disabled.
-
KAPM03080-E
HSSOIllegalArgumentException:Illegal parameters have been specified to create HSSO Context.
[Action]
HSSOIllegalArgumentException:Illegal parameters have been specified to create HSSO Context.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03081-E
HSSONotRegisteredException: The application is not registered.
[Action]
HSSONotRegisteredException: The application is not registered.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03082-E
HSSOAuthenticationException: Authentication failed.
[Action]
HSSOAuthenticationException: Authentication failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03083-E
HSSOServerException: An error occurred in HSSO Server.
[Action]
HSSOServerException: An error occurred in HSSO Server.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03084-E
IOException: HSSO SERVER Connection Error.
[Action]
IOException: HSSO SERVER Connection Error.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03085-E
HSSOIllegalArgumentException: "createToken()" was used before authentication.
[Action]
HSSOIllegalArgumentException: "createToken()" was used before authentication.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03086-E
HSSOIllegalStateException: An unsupported version is specified.
[Action]
HSSOIllegalStateException: An unsupported version is specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03087-E
An error occurred while accessing the DBMS.
[Action]
An error occurred while accessing the DBMS.
Verify that the DBMS, the HBase Storage Mgmt Web Service, and the HBase Storage Mgmt Common Service are running. If they are running, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
-
KAPM03105-E
A CIMException was generated during menu bar display processing.
[Action]
A CIMException was generated during menu bar display processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03106-E
A CIMException was generated during subwindow display processing.
[Action]
A CIMException was generated during subwindow display processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03107-E
A CIMRepositoryException was generated during menu bar display processing.
[Action]
A CIMRepositoryException was generated during menu bar display processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03108-E
A CIMRepositoryException was generated during subwindow display processing.
[Action]
A CIMRepositoryException was generated during subwindow display processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03109-E
A CIMProviderException was generated during menu bar display processing.
[Action]
A CIMProviderException was generated during menu bar display processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03110-E
A CIMProviderException was generated during subwindow display processing.
[Action]
A CIMProviderException was generated during subwindow display processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03111-E
An exception was generated during menu bar display processing.
[Action]
An exception was generated during menu bar display processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03112-E
An exception was generated during subwindow display processing.
[Action]
An exception was generated during subwindow display processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03113-E
A NoSuchElementException was generated during menu bar display processing.
[Action]
A NoSuchElementException was generated during menu bar display processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03114-E
A NoSuchElementException was generated during subwindow display processing.
[Action]
A NoSuchElementException was generated during subwindow display processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03119-I
Are you sure that you want to log out?
[Action]
Are you sure that you want to log out?
-
KAPM03120-I
Do you want to end the application?
[Action]
Do you want to end the application?
-
KAPM03122-E
The request parameter for a launch is invalid.
[Action]
The request parameter for a launch is invalid.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM03123-E
Could not acquire the required parameter. ParmName=aa...aa
[Action]
The required parameter could not be acquired.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Parameter name
-
KAPM03124-E
Failed to changing of token version. Token=aa...aa
[Action]
An attempt to change the token version has failed.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Token
-
KAPM03125-E
Failed to getting of service information. Description=aa...aa
[Action]
The acquisition of the service information has failed.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Description
-
KAPM03304-E
An attempt to get the path string failed.
[Action]
An attempt to get the path string failed.
Log in again.
-
KAPM03354-W
A value is not set because an argument is invalid.
[Action]
A value is not set because an argument is invalid.
-
KAPM03355-W
A value is not acquired because an argument is invalid.
[Action]
A value is not acquired because an argument is invalid.
-
KAPM03356-W
A default is set because an argument is invalid. default = aa...aa
[Action]
A default is set because an argument is invalid.
aa...aa: Default
-
KAPM03357-E
A parameter of request is invalid. paramName = aa...aa, value = bb...bb
[Action]
A parameter of request is invalid.
Log in again.
aa...aa: Parameter name
bb...bb: Value
-
KAPM03358-E
The tree element is invalid. treeElement = aa...aa
[Action]
The tree element is invalid.
Log in again.
aa...aa: Tree element
-
KAPM03361-E
An attempt to get the root element data has failed.
[Action]
An attempt to get the root element data has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03362-E
An attempt to get the common repository has failed.
[Action]
An attempt to get the common repository has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03363-E
An attempt to get the common resource has failed.
[Action]
An attempt to get the common resource has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03364-E
The registered data in the common repository is invalid.
[Action]
The registered data in the common repository is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03366-E
An attempt to get the name of default view is invalid. application name = aa...aa
[Action]
An attempt to get the name of default view is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Application name
-
KAPM03368-W
An invalid association definition exists in the repository. instance = aa...aa
[Action]
An invalid association definition exists in the repository.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Instance
-
KAPM03370-W
A tree element relation (TNB_AssocNavigationDef) is invalid. name=aa...aa, associationClass=bb...bb, fromName=cc...cc, toClassName=dd...dd, fromRole=ee...ee, toRole=ff...ff
[Action]
A tree element relation (TNB_AssocNavigationDef) is invalid.
aa...aa: Related name
bb...bb: Related class name
cc...cc: Class name of a relation place
dd...dd: Class name of a related agency
ee...ee: Attribute of a relation place
ff...ff: Attribute of a related agency
-
KAPM03371-W
A tree element relation (TNB_AllInstanceNavigationDef) is invalid. name=aa...aa, fromName=bb...bb, toClassName=cc...cc
[Action]
A tree element relation (TNB_AllInstanceNavigationDef) is invalid.
aa...aa: Related name
bb...bb: Class name of a relation place
cc...cc: Class name of a related
-
KAPM03375-W
An attempt to get the tree element data has failed. element = aa...aa
[Action]
An attempt to get the tree element data has failed.
aa...aa: Element
-
KAPM03377-W
A tree has not been created in the state where the specification object was opened. objectName = aa...aa
[Action]
A tree has not been created in the state where the specification object was opened.
aa...aa: Object name
-
KAPM03378-W
The specified object does not exist or is not shown in the tree. pathName = aa...aa, objectName = bb...bb
[Action]
The specified object does not exist or is not shown in the tree.
aa...aa: Path name
bb...bb: Object name
-
KAPM03379-E
An attempt to create a tree from a request has failed.
[Action]
An attempt to create a tree from a request has failed.
Log in again.
-
KAPM03380-W
An active object was not found. By default, the root object will be set.
[Action]
An active object was not found. By default, the root object will be set.
-
KAPM03381-E
An internal error occurred. If you click the Refresh button, the initial object tree will be displayed. If you cannot display the tree, log in again and then retry.
[Action]
An internal error occurred. If you click the Refresh button, the initial object tree will be displayed. If you cannot display the tree, log in again and then retry.
Click the "Refresh" button to display the initial object tree. If the initial object tree cannot be displayed, log in again. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM03382-E
An internal error occurred. If you click the Refresh button, the initial object tree will be displayed. If you cannot display the tree, collect maintenance information, and then contact customer support.
[Action]
An internal error occurred. Click the "Refresh" button to display the initial object tree.
Click the "Refresh" button to display the initial object tree. If the initial object tree cannot be displayed, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM03383-E
An internal error has occurred. Retry the operation. If the problem still cannot be solved, log in again and then retry.
[Action]
An internal error has occurred. Retry the operation. If the problem still cannot be solved, log in again and then retry.
Do the following:
1. Retry the operation.
2. If the problem still cannot be solved, log in again and then retry.
3. If the problem still cannot be solved, collect maintenance information, and then contact the Support Center.
-
KAPM03384-E
An internal error has occurred. Retry the operation. If the problem still cannot be solved, collect maintenance information, and then contact customer support.
[Action]
An internal error has occurred.
Retry the previous operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. Restore the data from the backup file.
-
KAPM03501-E
A CIM object name is not available for the selected object.
[Action]
A CIM object name is not available for the selected object.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03502-W
There is no default method.
[Action]
There is no default method.
-
KAPM03503-W
The repository data is invalid, so the localization object acquisition failed.
[Action]
The repository data is invalid, so the localization object acquisition failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03504-W
A resource is not found, so the localization object acquisition failed.
[Action]
A resource is not found, so the localization object acquisition failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03505-W
The selected object is already deleted.
[Action]
The selected object is already deleted.
Click the "Refresh" in NavigationFrame.
-
KAPM03702-E
A HSSOIllegalStateException occurred during launch.
[Action]
A HSSOIllegalStateException occurred during launch.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03703-E
An attempt to get to the URL encoding of a token failed.
token = aa...aa
[Action]
An attempt to get to the URL encoding of a token failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Token
-
KAPM03708-E
A HSSOAuthenticationException was generated during user profile display processing.
[Action]
A HSSOAuthenticationException was generated during user profile display processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03709-E
A HSSOIllegalArgumentException was generated during user profile display processing.
[Action]
A HSSOIllegalArgumentException was generated during user profile display processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03710-E
A HSSOServerException was generated during user profile display processing.
[Action]
A HSSOServerException was generated during user profile display processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03712-E
An attempt to get membership groups failed.
[Action]
An attempt to get membership groups failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03716-E
The format of the URL bb...bb for the object aa...aa is invalid.
[Action]
The format of the URL bb...bb for the object aa...aa is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Object name
bb...bb: URL
-
KAPM03717-W
The resource bb...bb for object aa...aa cannot be accessed.
[Action]
The resource bb...bb for object aa...aa cannot be accessed.
aa...aa: Object name
bb...bb: Resource name
-
KAPM03718-E
The data format of the resource bb...bb for the object aa...aa is invalid..
[Action]
The data format of the resource bb...bb for the object aa...aa is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Object name
bb...bb: Resource name
-
KAPM03721-E
The attribute bb...bb for object aa...aa is missing.
[Action]
The attribute bb...bb for object aa...aa is missing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Object name
bb...bb: Value of attribute
-
KAPM03722-E
The resource information of bb...bb for object aa...aa is missing.
[Action]
The resource information of bb...bb for object aa...aa is missing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Object name
bb...bb: Related name
-
KAPM03723-E
Property cc...cc of bb...bb for object aa...aa is missing.
[Action]
Property cc...cc of bb...bb for object aa...aa is missing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Object name
bb...bb: Related name
cc...cc: Value of attribute
-
KAPM03931-W
Your session is invalid. Logout, and then login again.
[Action]
Your session is invalid. Logout, and then login again.
Your session is invalid. Logout, and then login again.
-
KAPM03951-E
An internal server error has occurred.
[Action]
An internal server error has occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03952-E
An attempt to get the Session has failed.
[Action]
An attempt to get the Session has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03954-E
An attempt to get the HSSOSubject has failed.
[Action]
An attempt to get the HSSOSubject has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03956-E
The login process has not completed properly.
[Action]
The login process has not completed properly.
Specify the correct user ID and password.
-
KAPM03957-E
An error occurred when the Common Repository was accessed.
[Action]
An error occurred when the Common Repository was accessed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03958-E
The request type is not correct.
[Action]
The request type is not correct.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03960-E
An attempt to get the string from the ResourceBundle failed.
[Action]
An attempt to get the string from the ResourceBundle failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03961-E
An attempt to get the RequestDispatcher for "aa...aa" failed.
[Action]
An attempt to get the RequestDispatcher for "aa...aa" failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Unexpected operation
-
KAPM03962-E
An attempt to get the application name has failed.
[Action]
An attempt to get the application name has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM03963-E
Authentication has failed.
[Action]
Authentication has failed.
Log in again. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. Restore the data from the backup file.
-
KAPM03964-E
An error occurred on the Single Sign On server.
[Action]
An error occurred on the Single Sign On server.
Do the following:
1. When using HiCommand V3.x series, make sure that the InterBase service is running. When using the HiCommand V4.x series or later, make sure that HiRDB is running.
2. If you are using HiCommand Device Manager, make sure its services are running.
3. Make sure that the settings and statuses of the Single Sign On server service are appropriate.
4. If the problem cannot be solved, collect maintenance information, and then contact the Support Center.
-
KAPM03965-E
An error occurred on the Single Sign On server.
[Action]
An error occurred on the Single Sign On server.
Do the following:
1. When using HiCommand V3.x series, make sure that the InterBase service is running. If it is not running, start InterBase and log in again. If it is running, restart the Single Sign On Server, and log in again.
When using the HiCommand V4.x series or later, make sure that HiRDB is running. If it is not running, start HiRDB and log in again. If it is running, restart the Single Sign On Server, and log in again.
2. If you are using HiCommand Device Manager, make sure its services are running.
3. Make sure that the settings and statuses of the Single Sign On Server are appropriate.
4. If the problem cannot be solved, collect maintenance information, and then contact the Support Center.
-
KAPM03966-E
Communications of the Single Sign On server have failed.
[Action]
Communications of the Single Sign On server have failed.
An error occurred on the web server or proxy server. Do the following:
1. Make sure that the services of the Single Sign On server are running.
2. Make sure that the settings and statuses of the Single Sign On server service are appropriate.
-
KAPM03967-E
Communications of the Single Sign On server have failed.
[Action]
Communications of the Single Sign On server have failed.
An error occurred on the web server or proxy server. Do the following:
1. Make sure that HiCommand Suite Common Web Service is running.
2. Make sure that the settings and statuses of the Single Sign On server service are appropriate.
-
KAPM03968-E
The token is invalid. token=aa...aa.
[Action]
The token is invalid.
Log in again.
aa...aa: Token
-
KAPM03969-E
The request is invalid.token=aa...aa. The name of application=bb...bb.
[Action]
The request is invalid.
Log in again. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. Restore the data from the backup file.
aa...aa: Token
bb...bb: Name of application
-
KAPM03970-E
The request is invalid.token=aa...aa. The name of application=bb...bb.
[Action]
The request is invalid.
Log in again. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. Restore the data from the backup file.
aa...aa: Token
bb...bb: Name of application
-
KAPM03971-E
The application is not registered. The name of application=aa...aa.
[Action]
The application is not registered.
Log in again. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. Restore the data from the backup file.
aa...aa: Name of application
-
KAPM04001-I
usage start.
[Action]
This message is displayed when the usage output method of the command starts.
-
KAPM04002-I
usage is finished.
[Action]
This message is displayed when the usage output method of the command ends.
-
KAPM04003-I
hcmdssup start.
[Action]
The hcmdssup command has started.
-
KAPM04004-I
hcmdssup is finished.
[Action]
The hcmdssup command has stopped.
-
KAPM04006-W
Log initialization has failed.
[Action]
The process outputting the hcmdssup log has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04007-E
File is not found. file-name=aa...aa
[Action]
The file could not be found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM04008-E
The error has occurred in file access. file-name=aa...aa
[Action]
An error occurred while the hsso.conf file was being accessed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM04009-E
aa...aa
[Action]
A NumberFormatException occurred during the processing of hcmdssup.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: NumberFormat exception message
-
KAPM04010-E
aa...aa
[Action]
An IllegalArgumentException occurred during the processing of hcmdssup.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: IllegalArgument exception message
-
KAPM04011-E
aa...aa
[Action]
A NullPointerException occurred during the creation of an object, such as a file object.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: NullPointerException message
-
KAPM04012-E
aa...aa
[Action]
An IndexOutOfBoundsException occurred during the processing of hcmdssup.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: IndexOutOfBounds exception message
-
KAPM04013-E
aa...aa
[Action]
A SecurityException occurred while a system property was being accessed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: SecurityException message
-
KAPM04014-E
aa...aa
[Action]
An unexpected exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception message
-
KAPM04022-E
Hostname is too long.
[Action]
The host name is too long.
Specify a host name less than 64 bytes.
-
KAPM04023-E
Portnumber is invalid.
[Action]
The port number is invalid.
Specify a port number from 1 to 65535.
-
KAPM04024-E
Portnumber is invalid.
[Action]
The port number is invalid.
The specified value is outside the integer range. Check the port number.
-
KAPM04025-I
hcmdssup has succeeded.
[Action]
The hcmdssup was executed successfully.
-
KAPM04026-E
hcmdssup has failed.
[Action]
hcmdssup has failed.
Take action according to the proceeding message.
-
KAPM04027-E
The SSL port number is invalid.
[Action]
The SSL port number is invalid.
Specify a port number with a value from 1 to 65535.
-
KAPM04028-E
The SSL port number is invalid.
[Action]
The SSL port number is invalid.
The type of the port number is not an integer. Check the specified value.
-
KAPM04034-E
An attempt to read the file hsso.conf has failed.
[Action]
An attempt to read the file hsso.conf has failed.
Make sure that the hsso.conf file exists,that you have access permissions for this file, and that the file is not in use.
-
KAPM04035-E
An attempt to write to the file hsso.conf has failed.
[Action]
An attempt to write to the file hsso.conf has failed.
Make sure that the hsso.conf file exists,that you have access permissions for this file, and that the file is not in use.
-
KAPM04036-E
The specified command line input is invalid. (input data = aa...aa)
[Action]
The specified command line input is invalid.
Specify a valid option, and then re-execute the command.
aa...aa: input data
-
KAPM04038-E
The specified host name is invalid.
[Action]
The specified host name is invalid.
Specify a valid option, and then re-execute the command.
-
KAPM04040-E
The specified port number is invalid.
[Action]
The specified port number is invalid.
Specify a valid option, and then re-execute the command.
-
KAPM04042-E
The specified SSL port number is invalid.
[Action]
The specified SSL port number is invalid.
Specify a valid option, and then re-execute the command.
-
KAPM04050-I
The command hcmdsprmset ended successfully.
[Action]
The command ended successfully.
-
KAPM04051-E
The command hcmdsprmset has failed.
[Action]
The command failed.
Specify a valid option, and then re-execute the command.
-
KAPM04052-E
An option is invalid.
[Action]
The specified command line input was invalid.
Make sure the command format is correct.
-
KAPM04059-E
The specified host name is too long.
[Action]
The specified host name is too long.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04061-E
The value specified for an option is invalid.
[Action]
The value specified for an option is invalid.
Revise the values specified for the options.
-
KAPM04101-E
Container server name is invalid. Server= aa...aa
[Action]
Container server name is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Container server name
-
KAPM04102-E
Archive file is not found. file=aa...aa
[Action]
Archive file is not found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Archive file name
-
KAPM04103-E
Program type is invalid. type=aa...aa
[Action]
Program type is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Program type
-
KAPM04104-I
Starting web application registration...
[Action]
Web Application registration is now starting.
-
KAPM04105-E
Privilege is invalid.
[Action]
The user does not have sufficient permissions to execute the command.
Execute the command as a user with Administrator permission.
-
KAPM04106-E
Cannot get tmpjavavm.properties file name.
[Action]
Cannot get tmpjavavm.properties file name.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04107-E
Failed to get service registration status. service=aa...aa
[Action]
Failed to get service registration status.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Service name
-
KAPM04108-E
Cannot get javavm.properties file name.
[Action]
Cannot get javavm.properties file name.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04109-E
Cannot set JavaVM option.
[Action]
Cannot set JavaVM option.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04110-E
Cannot set Java options.
[Action]
Cannot set Java options.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04111-E
An attempt to check whether a program type exists in the hcmdswebpp.ini file has failed.
[Action]
An attempt to check whether a program type exists in the hcmdswebpp.ini file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04112-E
Cannot write hcmdswebpp.ini file.
[Action]
Cannot write hcmdswebpp.ini file.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04113-E
Service registration has failed. service=aa...aa
[Action]
Service registration has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Service name
-
KAPM04114-E
Failed to get service registration status. service=aa...aa
[Action]
Failed to get service registration status.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Service name
-
KAPM04115-E
Service registration has failed. service=aa...aa
[Action]
Service registration has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Service name
-
KAPM04116-I
hcmdsweb registration has succeeded.
[Action]
hcmdsweb registration was successful.
-
KAPM04117-I
Starting web application deletion...
[Action]
Web application deletion is now starting.
-
KAPM04118-E
Program type is not registered. type=aa...aa
[Action]
Program type is not registered.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Program type
-
KAPM04119-E
Cannot delete service and folder.
[Action]
Cannot delete service and folder.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04120-E
Cannot delete hcmdswebpp.ini file.
[Action]
Cannot delete hcmdswebpp.ini file.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04121-I
hcmdsweb deletion has succeeded.
[Action]
hcmdsweb deletion was successful.
-
KAPM04122-E
Cannot get only a war file name.
[Action]
Cannot get only a war file name.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04123-E
Cannot get hcmdswebpp.ini file name.
[Action]
Cannot get hcmdswebpp.ini file name.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04124-E
Cannot get tmphcmdswebpp.ini file name.
[Action]
Cannot get tmphcmdswebpp.ini file name.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04125-E
Log initialization has failed.
[Action]
Log initialization has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04126-E
Cannot insert new line character.
[Action]
Cannot insert new line character.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04127-E
An attempt to exchange hcmdswebpp.ini with tmphcmdswebpp.ini has failed.
[Action]
An attempt to exchange hcmdswebpp.ini with tmphcmdswebpp.ini has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04128-E
hcmdsweb registration has failed.
[Action]
hcmdsweb registration has failed.
Take action according to the last message.
-
KAPM04129-E
hcmdsweb deletion has failed.
[Action]
hcmdsweb deletion has failed.
Take action according to the last message.
-
KAPM04130-E
Cannot read hcmdswebpp.ini file.
[Action]
Cannot read hcmdswebpp.ini file.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04131-E
OpenSCManager command error.
[Action]
OpenSCManager command error.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04132-E
Access is denied.
[Action]
Access is denied.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04133-E
The parameter is incorrect.
[Action]
The parameter is incorrect.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04134-E
The database specified does not exist.
[Action]
The database specified does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04135-E
An unexpected error occurred. Error code = aa...aa
[Action]
An unexpected error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error code
-
KAPM04136-E
RegOpenKeyEx command error.ErrorCode(aa...aa)
[Action]
RegOpenKeyEx command error.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error code
-
KAPM04137-E
A duplicate name exists on the network.
[Action]
A duplicate name exists on the network.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04138-E
The filename, directory name, or volume label syntax is incorrect.
[Action]
The filename, directory name, or volume label syntax is incorrect.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04139-E
The account name is invalid or does not exist.
[Action]
The account name is invalid or does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04140-E
Circular service dependency was specified.
[Action]
Circular service dependency was specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04141-E
Service already exists. service=aa...aa
[Action]
Service already exists.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Service name
-
KAPM04142-E
The handle is invalid.
[Action]
The handle is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04143-E
The specified service has been marked for deletion.
[Action]
The specified service has been marked for deletion.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04144-E
CreateService command error. code=aa...aa
[Action]
CreateService command error.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error code
-
KAPM04145-E
DeleteService command error. code=aa...aa
[Action]
DeleteService command error.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error code
-
KAPM04146-E
OpenService command error. code=aa...aa
[Action]
OpenService command error.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error code
-
KAPM04147-E
The specified service does not exist as an installed service.
[Action]
The specified service does not exist as an installed service.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04148-E
RegQueryValueEx command error. code=aa...aa
[Action]
RegQueryValueEx command error.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error code
-
KAPM04149-E
The error has occurred in aa...aa command. code=bb...bb
[Action]
The error has occurred in aa...aa command.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command
bb...bb: Error code
-
KAPM04150-E
The directory cannot be removed. directory=aa...aa
[Action]
The directory cannot be removed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Directory name
-
KAPM04151-E
The directory is not empty. directory=aa...aa
[Action]
The directory is not empty.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Directory name
-
KAPM04152-E
The directory name is invalid. directory=aa...aa
[Action]
The directory name is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Directory name
-
KAPM04153-E
QueryServiceStatus command error. code=aa...aa
[Action]
QueryServiceStatus command error.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error code
-
KAPM04154-E
Failed to get installation directory.
[Action]
Failed to get installation directory.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04155-E
Failed to get Service name. service=aa...aa
[Action]
Failed to get Service name.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Service name
-
KAPM04156-E
Service is running. service=aa...aa
[Action]
Service is running.
Stop the service, and then execute the command again.
aa...aa: Service name
-
KAPM04157-E
Failed to get service status. service=aa...aa
[Action]
Failed to get service status.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Service name
-
KAPM04158-E
File is not found. file=aa...aa
[Action]
File is not found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM04159-E
Failed to delete specified file. file=aa...aa
[Action]
Failed to delete specified file.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM04160-E
Failed to rename aa...aa to bb...bb.
[Action]
Failed to rename aa...aa to bb...bb.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Original file name
bb...bb: New file name
-
KAPM04161-E
Privilege is invalid to access aa...aa file.
[Action]
Permission to access the file is insufficient.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM04162-E
Failed to copy from aa...aa to bb...bb.
[Action]
Failed to copy from aa...aa to bb...bb.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Name of the source file
bb...bb: Name of the destination file
-
KAPM04163-E
Failed to delete service. service=aa...aa
[Action]
Failed to delete service.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Service name
-
KAPM04164-W
Failed to delete the war file. file=aa...aa
[Action]
Failed to delete the war file.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: War file name
-
KAPM04165-W
Failed to delete the folder. folder=aa...aa
[Action]
Failed to delete the folder.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Folder name
-
KAPM04166-E
Failed to delete service. service=aa...aa
[Action]
Failed to delete service.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Service name
-
KAPM04167-E
Failed to get service folder. service-folder=aa...aa
[Action]
Failed to get service folder.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Service folder name
-
KAPM04168-W
Failed to delete service folder. service-folder=aa...aa
[Action]
Failed to delete service folder.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Service folder name
-
KAPM04169-E
File is not found. file=aa...aa
[Action]
File is not found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM04172-E
Failed to write usrconf.properties to installation information.
[Action]
Failed to write usrconf.properties to installation information.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04173-E
Failed to read usrconf.properties file.
[Action]
Failed to read usrconf.properties file.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04174-E
Failed to exchange usrconf.properties to tmpusrconf.properties.
[Action]
Failed to exchange usrconf.properties to tmpusrconf.properties.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04175-E
Failed to create directory. directory=aa...aa
[Action]
Failed to create directory.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Directory name
-
KAPM04176-E
Failed to get the war file name. file=aa...aa
[Action]
Failed to get the war file name.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM04177-E
Failed to read javavm.properties file.
[Action]
Failed to read javavm.properties file.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04178-E
An attempt to exchange javavm.properties with tmpjavavm.properties has failed.
[Action]
An attempt to exchange javavm.properties with tmpjavavm.properties has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04197-I
Service registration has succeeded. service=aa...aa
[Action]
The service was successfully registered.
aa...aa: Service name
-
KAPM04198-I
Service registration has succeeded. service=aa...aa
[Action]
The service was successfully registered.
aa...aa: Service name
-
KAPM04202-I
Service deletion has succeeded. service=aa...aa
[Action]
The service was successfully deleted.
aa...aa: Service name
-
KAPM04205-E
Memory alloc error. code=aa...aa
[Action]
Memory alloc error.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error code
-
KAPM04206-E
The system cannot find the file specified.
[Action]
The system cannot find the file specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04207-E
The system cannot find the path specified.
[Action]
The system cannot find the path specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04208-E
The system cannot open the file.
[Action]
The system cannot open the file.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04209-E
The process cannot access the file because it is being used by another process.
[Action]
The process cannot access the file because it is being used by another process.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04211-E
Failed to get tmpusrconf.properties file name.
[Action]
Failed to get tmpusrconf.properties file name.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04212-E
Failed to get usrconf.properties file name.
[Action]
Failed to get usrconf.properties file name.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04213-E
ExtractionWarFolderPath function error.
[Action]
ExtractionWarFolderPath function error.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04214-E
Failed to get web-users.xml file name.
[Action]
Failed to get web-users.xml file name.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04215-E
Failed to get template usrconf.properties file name.
[Action]
Failed to get template usrconf.properties file name.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04216-E
Failed to get template web-users.xml file name.
[Action]
Failed to get template web-users.xml file name.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04217-E
Failed to get template javavm.properties file name.
[Action]
Failed to get template javavm.properties file name.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04218-E
Failed to get Display name.
[Action]
Failed to get Display name.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04219-E
Failed to load hntr2t.dll. code=aa...aa
[Action]
Failed to load hntr2t.dll.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error code
-
KAPM04220-E
The file option is invalid.
[Action]
The file option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04221-E
The type option is invalid.
[Action]
The type option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04222-E
The server option is invalid.
[Action]
The server option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04223-E
The classpath option is invalid.
[Action]
The classpath option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04224-E
The librarypath option is invalid.
[Action]
The librarypath option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04225-E
The javaoption option is invalid.
[Action]
The javaoption option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04226-E
The Xms option is invalid.
[Action]
The Xms option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04227-E
The Xmx option is invalid.
[Action]
The Xmx option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04228-E
RegCreateKeyEx command error. code=aa...aa
[Action]
RegCreateKeyEx command error.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error code
-
KAPM04229-E
RegSetValueEx command error. code=aa...aa
[Action]
RegSetValueEx command error.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error code
-
KAPM04230-I
Service deletion has succeeded. service=aa...aa
[Action]
Service deletion has succeeded.
aa...aa: Service name
-
KAPM04231-E
Failed to read usrconf.properties file.
[Action]
Failed to read usrconf.properties file.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04232-E
An attempt to register the program type in the registry failed.
program type = aa...aa
[Action]
An attempt to register the program type in the registry failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Program type
-
KAPM04233-E
An attempt to delete the program type in the registry failed.
program type = aa...aa
[Action]
An attempt to delete the program type in the registry failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Program type
-
KAPM04234-E
Failed to remake service.
[Action]
Failed to remake service.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04235-E
The minimum heap size has exceeded the maximum heap size.
[Action]
The minimum heap size has exceeded the maximum heap size.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04236-E
The minimum heap size has exceeded the already set up maximum heap size.
[Action]
The minimum heap size has exceeded the already set up maximum heap size.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04237-E
The service name exceeds 256 characters.
[Action]
The service name exceeds 256 characters.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04238-E
The service registration is not possible because the service name exceeds 256 characters.
[Action]
The service registration is not possible because the service name exceeds 256 characters.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04239-E
An attempt to get the service control manager execution file path failed.
[Action]
An attempt to get the service control manager execution file path failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04240-E
An error occurred when the environment settings folder was created.
[Action]
An error occurred when the environment settings folder was created.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04241-E
An error occurred when the environment settings file was set.
[Action]
An error occurred when the environment settings file was set.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04242-E
An error occurred when the web application archive file was expanded.
[Action]
An error occurred when the web application archive file was expanded.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04243-E
An error occurred when a directory expanded with the web application archive file was deleted.
[Action]
An error occurred when a directory expanded with the web application archive file was deleted.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04244-E
An error occurred when registering and updating the web server.
[Action]
An error occurred when registering and updating the web server.
If you are using Windows, close the Services window, and then perform the operation again. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. Restore the data from the backup file.
-
KAPM04245-E
An error occurred when registering and updating Tomcat.
[Action]
An error occurred when registering and updating Tomcat.
If you are using Windows, close the Services window, and then retry the operation. If you are using a platform other than Windows, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM04246-E
An error occurred when the usrconf.properties file was merged.
[Action]
An error occurred when the usrconf.properties file was merged.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04247-E
An attempt to acquire the number of file lines has failed.
[Action]
An attempt to acquire the number of file lines has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04248-E
An attempt to create Map information has failed.
[Action]
An attempt to create Map information has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04249-E
An attempt to read data from a file has failed.
[Action]
An attempt to read data from a file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04250-E
An attempt to set the javaVM debug option has failed.
[Action]
An attempt to set the JavaVM debug option has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04251-E
The jvmoption option is invalid.
[Action]
The jvmoption option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04252-E
An error occurred in an internal function. (call function = aa...aa, use function = bb...bb, note = cc...cc, error code = dd...dd)
[Action]
An error occurred in an internal function.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Call function
bb...bb: Use function
cc...cc: Note
dd...dd: Error code
-
KAPM04253-E
A memory allocation error occurred. (call function = aa...aa, use function = bb...bb, note = cc...cc, error code = dd...dd)
[Action]
A memory allocation error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Call function
bb...bb: Use function
cc...cc: Note
dd...dd: Error code
-
KAPM04254-E
An attempt to acquire the daemon shell name has failed.
[Action]
An attempt to acquire the daemon shell name has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04255-E
An attempt to write service registration information to the version file has failed.
[Action]
An attempt to write service registration information to the version file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04256-E
An attempt to delete service registration information from the version file has failed.
[Action]
An attempt to delete service registration information from the version file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04257-E
An attempt to start the hcmdssrv command has failed.
[Action]
An attempt to start the hcmdssrv command has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04258-E
An error occurred during execution of the hcmdssrv command.
[Action]
An error occurred during execution of the hcmdssrv command.
For details, refer to the hcmdssrv command log.
-
KAPM04259-E
An attempt to create the boot shell has failed.
[Action]
An attempt to create the boot shell has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04260-E
The startup mode of the service is invalid. (start mode = aa...aa)
[Action]
The startup mode of the service is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Start mode
-
KAPM04261-E
The starttype option is invalid.
[Action]
The starttype option is invalid.
Confirm the specification of the starttype option.
-
KAPM04262-E
An attempt to create the usrconf.cfg file has failed.
[Action]
An attempt to create the usrconf.cfg file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04263-E
An attempt to deploy the compiled JSP file has failed.
[Action]
An attempt to deploy the compiled JSP file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04264-E
A path was not found for the Web application folder. (folder path = aa...aa)
[Action]
A path was not found for the Web application folder.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Folder path
-
KAPM04265-E
A path was not found for the compiled JSP storage folder. (folder path = aa...aa)
[Action]
A path was not found for the compiled JSP storage folder.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Folder path
-
KAPM04266-E
The contents of the directory are invalid. (Directory path = aa...aa)
[Action]
The contents of the directory are invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Directory path
-
KAPM04267-W
An attempt to delete the hwc directory has failed. (Directory path = aa...aa)
[Action]
An attempt to delete the hwc directory has failed.
aa...aa: Directory path
-
KAPM04271-E
An attempt to update the web application version has failed.
[Action]
An attempt to update the web application version has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04272-E
Failed to delete specified directory. Directory=aa...aa
[Action]
Failed to delete specified directory.
See the message KAPMxxxxx-W.
aa...aa: Directory
-
KAPM04273-W
An attempt to execute the aa...aa function has failed. (error code = bb...bb, description = cc...cc)
[Action]
This message is displayed if an attempt to add a service description has failed.
The service explanation was not added. It will be added the next time the hcmdsweb command is executed.
aa...aa: Function name
bb...bb: Error code
cc...cc: Error description
-
KAPM04274-E
An attempt to load the DLL has failed.
[Action]
This message is displayed if an attempt to load the DLL has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04275-E
An attempt to acquire the function address in the DLL has failed.
[Action]
This message is displayed if an attempt to acquire the function address in the DLL has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04276-E
The file does not exist. (file name = aa...aa)
[Action]
This message is displayed if the file does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM04279-E
An attempt to add a service description has failed.
[Action]
This message is displayed if an attempt to add a service description has failed.
Take the appropriate action based on the preceding message.
-
KAPM04280-E
A memory allocation error occurred.
[Action]
This message is displayed if a memory allocation error has occurred.
Please see the message that follows.
-
KAPM04281-E
The specified service is not registered.
[Action]
This message is displayed if the specified service is not registered.
Please see the message that follows.
-
KAPM04282-E
An attempt to acquire the installation directory has failed.
[Action]
This message is displayed if an attempt to acquire the path of the HiCommand Suite Common Component installation folder has failed.
Please see the message that follows.
-
KAPM04283-E
The name of the specified service is invalid.
[Action]
This message is displayed if the specified service name is invalid.
Please see the message that follows.
-
KAPM04284-E
An attempt to access the service explanation definition file has failed.
[Action]
This message is displayed if an attempt to access the service explanation definition file has failed.
Please see the message that follows.
-
KAPM04285-E
The service explanation definition file is invalid.
[Action]
This message is displayed if the service explanation definition file is invalid.
Please see the message that follows.
-
KAPM04286-E
An attempt to change a service configuration parameter has failed.
[Action]
This message is displayed if an attempt to change a service configuration parameter has failed.
Please see the message that follows.
-
KAPM04287-E
An attempt to connect the service control manager has failed.
[Action]
This message is displayed if an attempt to connect the service control manager has failed.
Please see the message that follows.
-
KAPM04288-E
An attempt to open the service handle has failed.
[Action]
This message is displayed if an attempt to open the service handle has failed.
Please see the message that follows.
-
KAPM04289-E
An attempt to access the service explanation definition file has failed.
[Action]
This message is displayed if an attempt to access the service explanation definition file has failed.
Please see the message that follows.
-
KAPM04290-E
The service name was not specified.
[Action]
This message is displayed if the service name is not specified.
Please see the message that follows.
-
KAPM04291-I
Registration of the aa...aa Web application will now start.
[Action]
Web application registration is now starting.
aa...aa: Product name
-
KAPM04292-I
Deletion of the aa...aa Web application will now start.
[Action]
Web application deletion is now starting.
aa...aa: Product name
-
KAPM04293-E
An attempt to delete the JSP servlet class file has failed.
[Action]
An attempt to delete the JSP servlet class file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04294-I
The JSP servlet class file was deleted successfully.
[Action]
The JSP servlet class file was deleted successfully.
-
KAPM04295-I
Deletion of the JSP servlet class file will now start.
[Action]
Deletion of the JSP servlet class file will now start.
-
KAPM04296-I
Deletion of the JSP servlet class file will now end.
[Action]
Deletion of the JSP servlet class file will now end.
-
KAPM04300-I
Uninstallation of aa...aa has started.
[Action]
Uninstallation of aa...aa has started.
aa...aa: Product name
-
KAPM04301-I
[All processing has finished.]
[Action]
All processing has finished.
-
KAPM04302-I
Uninstallation was successful.
[Action]
Uninstallation was successful.
-
KAPM04303-I
All of the services for aa...aa have been deleted.
[Action]
All of the services for aa...aa have been deleted.
aa...aa: Product name
-
KAPM04304-I
Restart the machine, and then execute the program again.
[Action]
Restart the machine, and then execute the program again.
-
KAPM04305-E
Uninstallation has failed.
[Action]
Uninstallation has failed.
Manually perform the deletion.
-
KAPM04306-I
Uninstallation was successful. Restart the machine.
[Action]
Uninstallation was successful. Restart the machine.
-
KAPM04307-E
"aa...aa" has not stopped. Stop the service, and then try again.
[Action]
aa...aa has not stopped.
Stop the service, and then try again.
aa...aa: Service name
-
KAPM04311-E
An attempt to acquire an installation path for aa...aa has failed. Manually delete the installation directory.
[Action]
An attempt to acquire an installation path for aa...aa has failed.
Manually delete the installation directory.
aa...aa: Product name
-
KAPM04312-E
An attempt to acquire registry information has failed.
[Action]
An attempt to acquire registry information has failed.
-
KAPM04313-E
An attempt to acquire the registry information has failed. Manually delete the registry information.
[Action]
An attempt to acquire the registry information has failed. Manually delete the registry information.
-
KAPM04314-E
Some files remained. Manually delete them.
[Action]
Some files remained. Manually delete them.
-
KAPM04315-W
All the files for aa...aa will now be deleted. Is this OK?
[Action]
All the files for aa...aa will now be deleted. Is this OK?
aa...aa: Product name
-
KAPM04316-W
Are you sure you want to delete all of the files?
[Action]
Are you sure you want to delete all of the files?
-
KAPM04317-I
Uninstallation was interrupted.
[Action]
Uninstallation was interrupted.
-
KAPM04318-I
The OS setting information was successfully deleted.
[Action]
The OS setting information was successfully deleted.
-
KAPM04319-E
An attempt to delete the OS setting information has failed.
[Action]
An attempt to delete the OS setting information has failed.
manually perform the deletion.
-
KAPM04320-W
The resident process "aa...aa" has not stopped.
[Action]
The resident process aa...aa has not stopped.
aa...aa: Process name
-
KAPM04321-I
The OS settings information will now be deleted to stop the resident process.
[Action]
The OS settings information will now be deleted to stop the resident process.
-
KAPM04378-E
DOMException: aa...aa
[Action]
A DOMException has occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception message
-
KAPM04379-E
RuntimeException occurred. aa...aa
[Action]
A RuntimeException has occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception message
-
KAPM04380-E
MalformedURLException occurred. aa...aa
[Action]
A MalformedURLException has occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception message
-
KAPM04381-E
IllegalDataException occurred.
[Action]
An IllegalDataException has occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04382-E
IllegalOptionException occurred.
[Action]
An IllegalOptionException has occurred.
Specify a valid option to execute the command.
-
KAPM04383-E
IOException occurred. aa...aa
[Action]
An IOException has occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception message
-
KAPM04384-E
SAXException occurred. aa...aa
[Action]
A SAXException has occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception message
-
KAPM04385-E
HttpProtocolException occurred. aa...aa
[Action]
An HttpProtocolException has occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception message
-
KAPM04386-E
ServerNotStartException occurred.
[Action]
A ServerNotStartException has occurred.
Confirm that HiCommand Device Manager, HiCommand Suite Common Web Service, and HiCommand Suite Single Sign On Service are running, and that the port numbers used by these services are correct.
-
KAPM04389-E
Exception occurred. aa...aa
[Action]
An Exception has occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception message
-
KAPM04401-I
Initializing servlet.
[Action]
Servlet initialization has started.
-
KAPM04405-E
Can't read DTD file.
[Action]
An attempt to read the DTD file has failed.
Windows : Copy the file hcmdsrepClient.dtd and hcmdsrepServer.dtd from <HiCommand Suite Common Component installation-folder>\sample\conf to <HiCommand Suite Common Component installation-folder>\conf
Solaris or Linux : Copy the file hcmdsrepClient.dtd and hcmdsrepServer.dtd from /opt/HiCommand/Base/sample/conf to /opt/HiCommand/Base/conf
-
KAPM04411-I
HTTP:POST from aa...aa
[Action]
The IP address of the requesting client.
aa...aa: IP address
-
KAPM04421-E
The error has occurred in Repository process.
[Action]
The error has occurred in Repository process.
For the HiCommand V3.x series, confirm that InterBase or InterClient is running.
For the HiCommand V4.x series or later, confirm that HiRDB is running.
If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM04422-E
The illegal data has detected in Server process.
[Action]
The illegal data has detected during server process.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04423-E
The error has occurred in Server process.
[Action]
An error occurred during server processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04426-E
The version is incorrect. Version aa...aa is required.
[Action]
The client version is not 1.0.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Versions supported by the server
-
KAPM04429-E
An error occurred during server processing.
[Action]
An error occurred during server processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04440-E
Token has timed out.
[Action]
Token has timed out.
Execute hcmdsrep again.
-
KAPM04446-I
Starting information registration...
[Action]
Repository registration is now starting.
-
KAPM04455-W
aa...aa has already registered in Repository.
[Action]
aa...aa was already registered in the repository.
Specify a different combination of the type option and the displayname option to execute hcmdsrep.
aa...aa: Value specified by the type option and the displayname option
-
KAPM04463-W
aa...aa is not found in Repository.
[Action]
aa...aa was not found in the repository.
Specify registered information to execute hcmdsrep.
aa...aa: Value specified by the type option and the displayname option
-
KAPM04464-E
aa...aa is associated with more than one ServiceAccessPoint Instances.
[Action]
aa...aa is associated with more than one ServiceAccessPoint Instance.
The database might be corrupted. detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Value specified by the type option and the displayname option
-
KAPM04465-I
Starting information deletion...
[Action]
Deletion of product information from the repository is now starting.
-
KAPM04468-W
aa...aa is not found in Repository.
[Action]
aa...aa was not found in the repository.
Specify a valid program type to execute hcmdsrep.
aa...aa: Value specified by the type option and the displayname option
-
KAPM04472-I
Starting information display...
[Action]
Acquisition of display information from the repository is now starting.
-
KAPM04475-W
No results were found in Repository.
[Action]
No results were found in Repository.
-
KAPM04480-E
Type name is too Long.
[Action]
Type name is too Long.
The database might be corrupted. detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM04481-E
Type or URL is not set.
[Action]
Type or URL is not set.
The database might be corrupted. detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM04489-E
This version does not support the add option.
[Action]
This version does not support the add option.
The add option cannot be used.
-
KAPM04499-E
Detail of exception: aa...aa
[Action]
Detail of exception.
aa...aa: Contents of the exception
-
KAPM04510-E
Option is invalid. option= aa...aa
[Action]
An option is invalid.
Specify a valid option.
aa...aa: Option
-
KAPM04511-E
Option is invalid. option= aa...aa
[Action]
An option is invalid.
Specify a valid option.
aa...aa: Option
-
KAPM04512-E
Option is invalid. option= aa...aa
[Action]
An option is invalid.
Specify a valid option.
aa...aa: Option
-
KAPM04513-E
Option value is invalid. option-value=aa...aa
[Action]
An option value is invalid.
Specify a valid option.
aa...aa: Option value
-
KAPM04514-E
Following Option is not supported: aa...aa
[Action]
An option is invalid.
Specify a valid option.
aa...aa: Option
-
KAPM04515-E
Option is invalid. option= aa...aa
[Action]
An option is invalid.
Specify a valid option.
aa...aa: Option
-
KAPM04516-E
Option is invalid. option= aa...aa
[Action]
An option is invalid.
Specify a valid option.
aa...aa: Option
-
KAPM04517-E
Option is invalid.
[Action]
Option is invalid.
Specify a valid option.
-
KAPM04518-E
Option is invalid.
[Action]
Option is invalid.
Specify a valid option.
-
KAPM04519-E
Option is invalid.
[Action]
Option is invalid.
Specify a valid option.
-
KAPM04520-E
Option is invalid.
[Action]
Option is invalid.
Specify a valid option.
-
KAPM04521-E
Option is invalid.
[Action]
Option is invalid.
Specify a valid option.
-
KAPM04522-E
Invalid Group or Role.
[Action]
Invalid Group or Role.
Specify the name and password of a user who belongs to the GROUP "Global" and ROLE "Admin".
-
KAPM04523-E
Username or password is invalid.
[Action]
Username or password is invalid.
Specify a user name and password registered in HiCommand Device Manager.
-
KAPM04524-E
Failed to connect to HiCommand Suite Single Sign On Service.
[Action]
Failed to connect to HiCommand Suite Single Sign On Service.
Confirm that HiCommand Suite Single Sign On Service is running.
-
KAPM04525-E
Failed to connect to HiCommand Device Manager.
[Action]
Failed to connect to HiCommand Device Manager.
Confirm that the HiCommand Device Manager service is running.
-
KAPM04526-E
HSSOException occurred.
[Action]
An HSSOException has occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04527-E
FileNotFoundException occurred.
[Action]
A FileNotFoundException has occurred.
Windows : Copy the file hcmdsrepClient.dtd and hcmdsrepServer.dtd from <HiCommand Suite Common Component installation-folder>\sample\conf to <HiCommand Suite Common Component installation-folder>\conf
Solaris or Linux : Copy the file hcmdsrepClient.dtd and hcmdsrepServer.dtd from /opt/HiCommand/Base/sample/conf to /opt/HiCommand/Base/conf
-
KAPM04528-E
IOException occurred.
[Action]
An IOException has occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04529-E
Option needs value. option=aa...aa
[Action]
An option requires a value.
Specify a value for the option.
aa...aa: Option
-
KAPM04553-E
IOException occurred. aa...aa
[Action]
An IOException has occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception message
-
KAPM04554-E
Not support tag type detected.
[Action]
An unsupported tag type was detected.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04555-E
Value is too long.
[Action]
The value is too long.
Enter a string that does not exceed the character limit.
-
KAPM04556-E
Failed to connect to HiCommand Suite Common Web Service.
[Action]
HiCommand Suite Common Web Service could not be connected.
Confirm that HiCommand Suite Common Web Service is running.
-
KAPM04557-E
A single sign-on server exception has occurred.
[Action]
A single sign-on server exception has occurred.
Confirm that HiCommandServer and the database to be used are running. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM04558-E
An invalid role was detected.
[Action]
An invalid role was detected.
Specify a user belonging to the group "Admin" or "Peer" and the user's password.
-
KAPM04560-I
hcmdsrep add has succeeded. aa...aa
[Action]
hcmdsrep add has succeeded.
aa...aa: Program type
-
KAPM04561-I
hcmdsrep delete has succeeded. aa...aa
[Action]
hcmdsrep delete has succeeded.
aa...aa: Program type
-
KAPM04562-E
hcmdsrep add has failed. aa...aa
[Action]
hcmdsrep add has failed.
See the message output prior to receiving this message.
aa...aa: Program type
-
KAPM04563-E
hcmdsrep delete has failed. aa...aa
[Action]
hcmdsrep delete has failed.
See the message output prior to receiving this message.
aa...aa: Program type
-
KAPM04601-E
Command format is invalid.
[Action]
The command format is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04602-E
Command format is invalid. invalid-param=aa...aa
[Action]
The command format is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Invalid parameter
-
KAPM04603-E
File is not found. file-name=aa...aa
[Action]
The file could not be found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM04604-E
Directory is not found. directory-name=aa...aa
[Action]
The directory could not be found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Directory name
-
KAPM04605-E
Bundle PP Name is invalid. name=aa...aa
[Action]
The value of the type option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Invalid value
-
KAPM04606-E
Web Container server is invalid. name=aa...aa
[Action]
The value of the server option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Invalid value
-
KAPM04608-I
Setup completed successfully.
[Action]
Setup completed successfully.
-
KAPM04609-E
Failed to create file. file-name=aa...aa
[Action]
An attempt to create a file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM04613-I
Delete completed successfully.
[Action]
Delete completed successfully.
-
KAPM04614-E
Failed to setup server.
[Action]
An attempt to set up the server has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04615-E
Failed to delete server.
[Action]
An attempt to delete the server has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04616-E
Server is running. pid=aa...aa
[Action]
The server is running.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Process ID
-
KAPM04702-E
The option(s) specified is insufficient.
[Action]
The option(s) specified is insufficient.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04703-E
The option value specified is invalid.
[Action]
The option value specified is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04705-E
The option "aa...aa" is not supported.
[Action]
The option "aa...aa" is not supported.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Option
-
KAPM04706-E
The option "aa...aa" appears 2 times or more.
[Action]
The option "aa...aa" appears 2 times or more.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Option
-
KAPM04707-E
The combination of options is invalid.
[Action]
The combination of options is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04710-E
An exception occurred.
[Action]
An exception occurred. See the following message KAPM49001-E for details.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04711-E
The file "aa...aa" could not be read.
[Action]
The file "aa...aa" could not be read.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM04713-E
The input XML contains a grammar mistake.
[Action]
The input XML contains a grammar mistake.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04714-E
Failed to connect to HBase Storage Mgmt Common Service.
[Action]
Failed to connect to HBase Storage Mgmt Common Service.
Confirm that HBase Storage Mgmt Common Service is running.
-
KAPM04715-E
Failed to connect to HBase Storage Mgmt Web Service.
[Action]
Failed to connect to HBase Storage Mgmt Web Service.
Confirm that the HBase Storage Mgmt Web Service has started. If the HBase Storage Mgmt Web Service has started, confirm that the hostname in hsso.conf is correct.
Windows : <HiCommand Suite Common Component installation-folder>\conf\hsso.conf
Solaris or Linux : /opt/HiCommand/Base/conf/hsso.conf
-
KAPM04716-E
Failed to connect to the host specified in hsso.conf.
[Action]
Failed to connect to the host specified in hsso.conf.
Confirm that the host name in hsso.conf is correct.
Windows : <HiCommand Suite Common Component installation-folder>\conf\hsso.conf
Solaris or Linux: /opt/HiCommand/Base/conf/hsso.conf
-
KAPM04717-E
An invalid URL was detected. ( aa...aa )
[Action]
An invalid URL was detected.
Confirm that the URL is correct.
aa...aa: URL
-
KAPM04718-E
The server returned an empty response.
[Action]
The server returned an empty response.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04719-E
An unsupported element type was detected in the XML.
[Action]
An unsupported element type was detected in the XML.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04722-W
aa...aa error(s) were detected in the response.
[Action]
aa...aa error(s) were detected in the response.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Number of errors
-
KAPM04723-E
Invalid error information was detected.
[Action]
Invalid error information was detected.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04724-E
Invalid server information was detected.
[Action]
Invalid server information was detected.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04800-E
Authentication information is insufficient.
[Action]
Authentication information is insufficient.
Use a SOAP Client that send Authentication information.
-
KAPM04801-E
Authentication has failed.
[Action]
Authentication has failed to authenticate the specified user id or password. See the following message KAPM49001-E for details.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04802-E
A single sign-on server communication exception has occurred.
[Action]
Communication between a single sign-on client and the server has failed. See the following message KAPM49001-E for details.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04803-E
A single sign-on server exception has occurred.
[Action]
A single sign-on server exception has occurred. See the following message KAPM49001-E for details.
For the HiCommand V3.x series, confirm that InterServer/InterBase or HiCommand Device Manager is running.
For the HiCommand V4.x series or later, confirm that HiRDB or HiCommand Device Manager is running.
In all other cases, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM04805-E
An XML parser exception occurred.
[Action]
An XML parser exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04806-E
The received XML element aa...aa contains an unexpected value cc...cc for attribute bb...bb. The expected value is dd...dd. TARGET=ee...ee
[Action]
The received XML element aa...aa contains an unexpected value cc...cc for attribute bb...bb. The expected value is dd...dd.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: XML tag name including unexpected value
bb...bb: Name of attribute unexpected value is set
cc...cc: Unexpected value of attribute
dd...dd: Value of attribute the server expects
ee...ee: Information for processing
-
KAPM04807-E
The XML element aa...aa is not allowed as a child of element bb...bb. TARGET=cc...cc
[Action]
The XML element aa...aa is not allowed as a child of element bb...bb.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Tag name of unexpected element
bb...bb: Tag name of element including unexpected element
cc...cc: Information for processing
-
KAPM04808-W
The received XML attribute aa...aa is not allowed as an attribute of bb...bb. TARGET=cc...cc
[Action]
The XML attribute aa...aa is not allowed as an attribute of bb...bb.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Unexpected attribute name
bb...bb: Tag name of element including unexpected attribute
cc...cc: Information for processing
-
KAPM04809-E
Message catalog information is insufficient for the log message. TARGET=aa...aa
[Action]
Message catalog information is insufficient for the log message.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Information for processing
-
KAPM04810-E
A CIM Repository exception occurred. TARGET=aa...aa
[Action]
A CIM Repository exception occurred. See the following message KAPM49001-E for details.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Information for processing
-
KAPM04812-E
Failed to connect to HiCommand Device Manager.
[Action]
Failed to connect to HiCommand Device Manager.
Confirm that the service is running and check the value of HDVM.host in the init.conf file.
-
KAPM04813-E
An exception occurred. TARGET=aa...aa
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Information for processing
-
KAPM04814-W
The CIM datatype aa...aa is invalid for bb...bb; it will be handled as a string type.
[Action]
The CIM datatype aa...aa is invalid for bb...bb; it will be handled as a string type.
Specify a supported data type.
aa...aa: Specified CIM data type name
bb...bb: Attribute name Specified CIM data type is specified
-
KAPM04815-E
This operation aa...aa is unknown. TARGET= bb...bb
[Action]
This operation aa...aa is unknown.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Unexpected operation
bb...bb: Information for processing
-
KAPM04816-E
INSTANCENAME cannot be used for the set operation. TARGET=aa...aa
[Action]
INSTANCENAME cannot be used for the set operation.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Information for processing
-
KAPM04817-E
The CIM operation aa...aa is missing required argument bb...bb. TARGET=cc...cc
[Action]
The CIM operation aa...aa is missing a required argument bb...bb.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: CIM operation name
bb...bb: Essential parameter name
cc...cc: Information for processing
-
KAPM04818-I
Starting CIM access... Method = aa...aa
[Action]
CIM access is starting.
aa...aa: Name of the method of the repository API
-
KAPM04819-I
Ending CIM access...
[Action]
Ending CIM access.
-
KAPM04820-I
Receiving a request..
[Action]
Receiving a SOAP request.
-
KAPM04821-I
Replying to the request....
[Action]
Replying to the SOAP request.
-
KAPM04826-I
The instance has been updated. TARGET=aa...aa
[Action]
The instance has been updated by the set operation.
aa...aa: Information for processing
-
KAPM04827-I
A new instance has been created. TARGET=aa...aa
[Action]
A new instance has been created by the set operation.
aa...aa: Information for processing
-
KAPM04828-I
The class is empty. TARGET=aa...aa
[Action]
The result of the enumerate operation shows the class is empty.
aa...aa: Information for processing
-
KAPM04829-I
The instance could not be found. TARGET=aa...aa
[Action]
The instance could not be found.
aa...aa: Information for processing
-
KAPM04830-I
The instance was deleted. TARGET=aa...aa
[Action]
The instance was deleted.
aa...aa: Information for processing
-
KAPM04832-E
The input data aa...aa is not valid for data type bb...bb. TARGET=cc...cc
[Action]
The input data aa...aa is not valid for data type bb...bb. See the following message KAPM49001-E for details.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Input data value
bb...bb: Input data type
cc...cc: Information for processing
-
KAPM04833-E
The received XML element bb...bb is missing a required attribute aa...aa. TARGET=cc...cc
[Action]
The received XML element bb...bb is missing a required attribute aa...aa.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Required attribute name
bb...bb: XML tag name which contains attribute of aa...aa
cc...cc: Information for processing
-
KAPM04834-E
The received XML element bb...bb is missing a required child element aa...aa. TARGET=cc...cc
[Action]
The received XML element bb...bb is missing a required child element aa...aa.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: XML tag name of the required element
bb...bb: XML tag name of the parent element
cc...cc: Information for processing
-
KAPM04835-W
The received XML element bb...bb has no child element aa...aa. TARGET=cc...cc
[Action]
The received XML element bb...bb has no child element aa...aa.
Specify the bb...bb element for the aa...aa element in the XML file.
aa...aa: Required tag name
bb...bb: Tag name of parent element
cc...cc: Information for processing
-
KAPM04836-E
The received XML element aa...aa with attribute bb...bb=cc...cc is duplicated. TARGET=dd...dd
[Action]
The received XML element aa...aa with attribute bb...bb=cc...cc is duplicated.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Duplicated tag name of XML element
bb...bb: Attribute name
cc...cc: Attribute value
dd...dd: Information for processing
-
KAPM04837-E
The XML element aa...aa as child of element bb...bb is duplicated. TARGET=cc...cc
[Action]
The XML element aa...aa as child of element bb...bb is duplicated.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Duplicated tag name of XML element
bb...bb: Tag name of parent element
cc...cc: Information for processing
-
KAPM04838-I
The class has been created. TARGET=aa...aa
[Action]
The class has been created.
aa...aa: Information for processing
-
KAPM04839-I
The class already exist. TARGET=aa...aa
[Action]
The class already exists.
aa...aa: Information for processing
-
KAPM04840-I
The class could not be found. TARGET=aa...aa
[Action]
The class could not be found.
aa...aa: Information for processing
-
KAPM04841-I
The class was deleted. TARGET=aa...aa
[Action]
The class was deleted.
aa...aa: Information for processing
-
KAPM04842-E
The class aa...aa of the instance is invalid. TARGET=aa...aa
[Action]
The class aa...aa of the instance is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Information for processing
-
KAPM04901-E
The parameter is invalid.
[Action]
The parameter is invalid.
Set the valid parameter.
-
KAPM04902-E
A fatal error occurred.
[Action]
A fatal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04905-E
An attempt to open the file failed. Path = aa...aa
[Action]
An attempt to open the file failed.
Confirm that a file exists in the specified location or does not in use.
aa...aa: File path name
-
KAPM04906-I
The alias for aa...aa was set.
[Action]
The alias for aa...aa was set.
aa...aa: Program product name
-
KAPM04907-I
The alias for aa...aa was overwritten.
[Action]
The alias for aa...aa was overwritten.
aa...aa: Program product name
-
KAPM04908-I
The alias for aa...aa was deleted.
[Action]
The alias for aa...aa was deleted.
aa...aa: Program product name
-
KAPM04909-E
The alias for aa...aa does not exist.
[Action]
The alias for aa...aa does not exist.
aa...aa: Program product name
-
KAPM04910-W
The alias for aa...aa does not exist.
[Action]
The alias for aa...aa does not exist.
aa...aa: Program product name
-
KAPM04933-E
An option is invalid.
[Action]
An option is invalid.
-
KAPM04950-I
PrintWriter was created. path = "aa...aa", file = "bb...bb"
[Action]
PrintWriter was created.
aa...aa: Path of file bb...bb
bb...bb: File name
-
KAPM04951-I
BufferedReader was created. path = "aa...aa", file = "bb...bb"
[Action]
BufferedReader was created.
aa...aa: Path of file bb...bb
bb...bb: File name
-
KAPM04952-E
The file was not found. path = "aa...aa", file = "bb...bb"
[Action]
The file was not found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Path of file bb...bb
bb...bb: File name
-
KAPM04953-I
PrintWriter has closed.
[Action]
PrintWriter has closed.
-
KAPM04954-W
PrintWriter cannot be closed. PrintWriter is null.
[Action]
PrintWriter cannot be closed. PrintWriter is null.
-
KAPM04955-I
BufferedReader has closed.
[Action]
BufferedReader has closed.
-
KAPM04956-W
BufferedReader cannot be closed. BufferedReader is null.
[Action]
BufferedReader cannot be closed. BufferedReader is null.
-
KAPM04957-E
The specified application command is not registered. application name = "aa...aa"
[Action]
The specified application command is not registered.
aa...aa: Specified application name
-
KAPM04958-E
The specified application command is already registered. application name = "aa...aa"
[Action]
The specified application command is already registered.
aa...aa: Specified application name
-
KAPM04959-I
aa...aa has been added to the file.
[Action]
aa...aa has been added to the file.
aa...aa: Application name
-
KAPM04960-I
aa...aa has been removed from the file.
[Action]
aa...aa has been removed from the file.
aa...aa: Application name
-
KAPM04970-I
Processing ended normally.
[Action]
Processing ended normally.
-
KAPM04971-E
The specified command is already registered.
[Action]
The specified command is already registered.
-
KAPM04972-E
The specified command is not registered.
[Action]
The specified command is not registered.
-
KAPM04973-E
An option is invalid.
[Action]
An option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04974-E
An unexpected error occurred.
[Action]
An unexpected error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04975-E
The type of OS is unknown.
[Action]
The type of OS is unknown.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM04976-E
IllegalOptionException occurred. Description = "aa...aa"
[Action]
IllegalOptionException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error details
-
KAPM04977-E
InconsistencyException occurred. Description = "aa...aa"
[Action]
InconsistencyException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error details
-
KAPM05001-I
hcmdssrv was entered.
[Action]
The hcmdssrv command was entered.
-
KAPM05002-E
Command format is invalid.
[Action]
The option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05003-E
Option is invalid. option=aa...aa
[Action]
The option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Invalid option
-
KAPM05004-E
Server name is invalid. server-name=aa...aa
[Action]
The server name is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Server name
-
KAPM05005-E
The Win32API has failed. API name=aa...aa, error code=bb...bb
[Action]
An error has occurred in WIN32API.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Name of the WIN32API
bb...bb: Results of GetLastError()
-
KAPM05006-E
Failed to start service. service-name=aa...aa
[Action]
An attempt to start the service has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Service name
-
KAPM05007-I
Already started service. service-name=aa...aa
[Action]
The service is already running.
aa...aa: Service name
-
KAPM05008-E
Failed to stop service. service-name=aa...aa
[Action]
An attempt to stop the service has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Service name
-
KAPM05009-I
Already stopped service. service-name=aa...aa
[Action]
The service is already stopped.
aa...aa: Service name
-
KAPM05010-E
Failed to query service. service-name=aa...aa
[Action]
An attempt to query the service status has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Service name
-
KAPM05011-E
Failed to control service.
[Action]
An attempt to control the service has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05012-E
Failed to access registry. maintenance-code=aa...aa
[Action]
An attempt to access the registry has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Maintenance code
-
KAPM05013-W
Failed to read init.conf. maintenance-code=aa...aa
[Action]
An attempt to read init.conf has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Maintenance code
-
KAPM05014-W
Failed to initialize trace. api-name=aa...aa,reason=bb...bb
[Action]
An attempt to initialize the log has failed.
Confirm that the hcmdssrv command is not being executed at the same time. If this problem occurs frequently, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Log trace API name
bb...bb: Maintenance code
-
KAPM05015-E
An internal function has failed. Function name=aa...aa, error code=bb...bb
[Action]
An internal function has failed.
Take action according to the proceeding message.
aa...aa: Internal function name
bb...bb: Maintenance code
-
KAPM05016-I
Succeeded in starting of service. service-name=aa...aa
[Action]
A request to start the service was accepted.
aa...aa: Service name
-
KAPM05017-I
Succeeded in stopping of service. service-name=aa...aa
[Action]
A request to stop the service was accepted.
aa...aa: Service name
-
KAPM05018-E
A system call has failed. API name=aa...aa, error code=bb...bb
[Action]
A system call has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: System call name
bb...bb: Maintenance code
-
KAPM05019-W
Definition is invalid. name=aa...aa
[Action]
The definition is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Definition value name
-
KAPM05020-E
Failed to open file. maintenance-code=aa...aa
[Action]
An attempt to open the file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Maintenance code
-
KAPM05021-E
Service does not exist.
[Action]
The service does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05022-W
Service does not exist.
[Action]
The service does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05023-E
Could not find executable file. file-name=aa...aa
[Action]
Could not find executable file.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Executable file
-
KAPM05024-W
Failed to initialize trace. Reason=aa...aa
[Action]
Failed to initialize trace.
Processing is continued without a trace.
aa...aa: Reason
-
KAPM05025-I
The start type has been successfully changed. service-name = aa...aa
[Action]
The start type has been successfully changed.
aa...aa: Service name
-
KAPM05026-E
An attempt to change the start type has failed. service-name = aa...aa
[Action]
An attempt to change the start type has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Service name
-
KAPM05027-E
An attempt to start the DBMS service has failed.
[Action]
An attempt to start the DBMS service has failed.
Refer to details to the hcmdsdbsrv log.
-
KAPM05028-E
An attempt to stop the DBMS service has failed.
[Action]
An attempt to stop the DBMS service has failed.
Refer to details to the hcmdsdbsrv log.
-
KAPM05029-E
An attempt to acquire the status of the DBMS service has failed.
[Action]
An attempt to acquire the status of the DBMS service has failed.
Refer to details to the hcmdsdbsrv log.
-
KAPM05030-E
An attempt to query the status of a service has failed. (service name = aa...aa)
[Action]
An attempt to query the status of a service failed.
Take action according to the message output before or after this message.
aa...aa: Service name
-
KAPM05035-E
An attempt to execute the command aa...aa has failed.
[Action]
An attempt to execute a command has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: executable file name
-
KAPM05036-I
The command aa...aa was executed successfully. (return code = bb...bb)
[Action]
A command was executed successfully.
aa...aa: executable file name, bb...bb: return code
-
KAPM05037-E
An attempt to query a service has failed.
[Action]
An attempt to query a service has failed.
Take action according to the message output before or after this message.
-
KAPM05038-W
The error has occurred in aa...aa command. code=bb...bb
[Action]
The error has occurred in aa...aa command.
aa...aa: Command
bb...bb: Error code
-
KAPM05201-E
The memory is insufficient.(aa...aa)
[Action]
The memory is insufficient.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Variable name
-
KAPM05202-E
The number of options is insufficient.
[Action]
The number of options is insufficient.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05203-E
There is no value following the option.
[Action]
An option has been specified without a value.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05204-E
Option is invalid.
[Action]
An option contains an error.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05205-E
There is only a value though there is no option.
[Action]
Only a value is specified for arguments, and not the corresponding option.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05206-E
The error occurred in dispatcher.
[Action]
An error occurred in the dispatcher.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05207-E
The error occurred in the registration of the service controller.
[Action]
An error occurred in the registration of the service controller.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05208-E
The error occurred in the HandlerRoutine.
[Action]
An error occurred during list addition of the process's handler function.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05209-I
The service_stop_thread is started.
[Action]
A service stop request thread was opened.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05210-E
The error occurred in the service_stop_thread.
[Action]
An error occurred in the service stop request thread.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05211-E
The error occurred in the Report Status.
[Action]
An attempt to report progress to the service control manager has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05212-E
The error occurred in create JavaVM.
[Action]
An error occurred while generating the JavaVM.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05213-E
Failed to set processing of JavaVM.
[Action]
An attempt to set up the JavaVM has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05214-I
aa...aa started.
[Action]
The service has started.
aa...aa: Service name
-
KAPM05215-I
aa...aa stopped.
[Action]
The service has stopped.
aa...aa: Service name
-
KAPM05216-E
The error occurred in the start of service.
[Action]
An attempt to start the service failed or the service stopped abnormally.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05217-E
Failed to get to the option definition file value.
[Action]
An attempt to get the value of the option definition file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05218-E
Failed to change the current directory.
[Action]
An attempt to change the current directory has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05219-E
Failed to create JavaVM.
[Action]
An attempt to create the JavaVM has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05220-E
Failed to connect to JavaVM.
[Action]
An attempt to connect to the JavaVM has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05221-E
The class is not found.
[Action]
The class was not found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05222-E
The method is not found.
[Action]
The method was not found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05223-E
The error occurred in the Getinstpath.(aa...aa)
[Action]
An error occurred while acquiring a key or path from the registry.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Registry key or registry path
-
KAPM05224-E
The error occurred in the LoadLibrary.
[Action]
An attempt to load the DLL has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05225-E
The error occurred in the GetProcAddress.
[Action]
An attempt to get the function address in the DLL has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05226-E
The error occurred in the AllocConsole.
[Action]
An error occurred while allocating a new console to a process.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05227-E
The error occurred in the DeleteFile.
[Action]
An error occurred while deleting a file.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05228-E
The error occurred in the GenerateConsoleCtrlEvent.
[Action]
An error occurred while sending the specified signal to the console process group.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05229-E
An attempt to execute the command to start the Web container server has failed.
[Action]
An attempt to execute the command to start the Web container server has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05230-E
An attempt to execute the command to stop the Web container server has failed.
[Action]
An attempt to execute the command to stop the Web container server has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05231-E
An attempt to execute the thread-dump acquisition command has failed.
[Action]
An attempt to execute the thread-dump acquisition command has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05232-E
The service stopped abnormally. (service name = aa...aa)
[Action]
The service stopped abnormally
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Service name
-
KAPM05250-I
Registration of the information-search user has finished.
[Action]
Registration of the information-search user has finished.
-
KAPM05251-I
Deletion of the information-search user has finished.
[Action]
Deletion of the information-search user has finished.
-
KAPM05252-E
An option is invalid.
[Action]
An option specified for the command is invalid.
Specify a correct option.
-
KAPM05253-E
The specified option contains an invalid character.
[Action]
The specified option parameter contains an invalid character.
Specify valid characters for the option parameter.
-
KAPM05255-E
An internal error occurred.
[Action]
An internal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05256-E
A fatal error occurred.
[Action]
A fatal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05257-E
Log initialization has failed.
[Action]
Log initialization has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05258-I
The command has started.
[Action]
The command has started.
-
KAPM05259-I
The command has ended.
[Action]
The command has ended.
-
KAPM05263-W
No registered information exists.
[Action]
No registered information exists.
Register user information by using the set option, and then re-execute the command. If the same message is output again, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05264-E
The file format is invalid.
[Action]
The file format is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05265-E
An error occurred during file I/O processing.
[Action]
An error occurred during file I/O processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05266-W
A server has not been registered.
[Action]
No information was displayed when the list option was specified.
Register user information by using the set option, and then re-execute the command. If the same message is output again, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05280-I
Registration of a secret has succeeded.
[Action]
Registration of a secret has succeeded.
-
KAPM05281-I
Deletion of a secret has succeeded.
[Action]
Deletion of a secret has succeeded.
-
KAPM05282-E
An option is invalid.
[Action]
An option is invalid.
Specify a valid option.
-
KAPM05285-E
An internal error occurred.
[Action]
An internal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05286-E
A fatal error occurred.
[Action]
A fatal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05288-I
The command has started.
[Action]
The command hcmdsradiussecret has started.
-
KAPM05289-I
The command has finished.
[Action]
The command hcmdsradiussecret has finished.
-
KAPM05293-W
No registered information exists.
[Action]
No registered information exists.
Register a secret by using the set option, and then re-execute the command. If the same message is output again, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05294-E
The file format is invalid.
[Action]
The file format is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05295-E
An error occurred during file I/O processing.
[Action]
An error occurred during file I/O processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05296-W
A server has not been registered.
[Action]
No information was displayed when the list option was specified.
Register a secret by using the set option, and then re-execute the command. If the same message is output again, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05301-E
The license has expired.
[Action]
The license has expired.
Use a license key that has not expired.
-
KAPM05302-E
The system environment is incorrect.
[Action]
The system environment is incorrect.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05303-E
The entered license key is invalid.
[Action]
The entered license key is invalid.
Use a regular license key published by the license server.
-
KAPM05304-I
Processing ended normally.
[Action]
Processing ended normally.
-
KAPM05308-I
The acquiring of aa...aa logs started.
[Action]
The acquiring of aa...aa logs started.
aa...aa: Application name
-
KAPM05309-I
Backup of aa...aa started.
[Action]
Backup of aa...aa started.
aa...aa: Application name
-
KAPM05310-E
The acquiring of aa...aa logs abnormally ended.
[Action]
The acquiring of aa...aa logs abnormally ended.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Application name
-
KAPM05311-I
The acquiring of aa...aa logs successfully ended.
[Action]
The acquiring of aa...aa logs successfully ended.
aa...aa: Application name
-
KAPM05312-E
Backup of aa...aa abnormally ended.
[Action]
Backup of aa...aa abnormally ended.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Application name
-
KAPM05313-I
Backup of aa...aa successfully ended.
[Action]
Backup of aa...aa successfully ended.
aa...aa: Application name
-
KAPM05314-E
The specified directory is not empty.
[Action]
The specified directory is not empty.
Specify an empty directory.
-
KAPM05315-E
An option is invalid.
[Action]
An option is invalid.
Check the options of the command.
-
KAPM05316-E
The specified directory name aa...aa is invalid.
[Action]
The specified directory name aa...aa is invalid.
Confirm that the specified directory is correct.
aa...aa: Invalid directory name
-
KAPM05317-E
aa...aa is not registered. bb...bb is available.
[Action]
aa...aa is not registered. bb...bb is available.
Specify the registered program product name.
aa...aa: Program product name specified in option
bb...bb: Program product name registered in the command
-
KAPM05318-I
The acquiring of logs successfully ended. aa...aa
[Action]
The acquiring of aa...aa logs successfully ended.
aa...aa: Program product name
-
KAPM05319-E
The acquiring of logs abnormally ended. aa...aa
[Action]
The acquiring of aa...aa logs abnormally ended.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Program product name
-
KAPM05320-I
Backup successfully ended. (aa...aa)
[Action]
Backup successfully ended.
aa...aa: Program product name
-
KAPM05321-E
Backup abnormally ended. (aa...aa)
[Action]
Backup abnormally ended.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Program product name
-
KAPM05322-E
aa...aa does not exist.
[Action]
aa...aa does not exist.
Confirm that the file exists in the specified directory.
aa...aa: File name
-
KAPM05323-I
Information for restore:
To restore the HiCommand shared repository, specify the "/enforce" option .
Before restoring, you have to stop the services "InterServer" and "InterBase Server".
Note that the HiCommand shared repository is overwritten with old backup data after the restore.
[Action]
Information for restore:
To restore the HiCommand shared repository, specify the "/enforce" option.
Before restoring, you have to stop the services "InterServer" and "InterBase Server".
Note that the HiCommand shared repository is overwritten with old backup data after the restore.
-
KAPM05324-E
The privilege is invalid.
[Action]
The privilege is invalid.
Execute as a user with execution privilege.
-
KAPM05325-E
An attempt to execute hcmdsras failed.
[Action]
An attempt to execute hcmdsras failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05326-E
An attempt to execute jar has failed.
[Action]
An attempt to execute jar has failed.
Confirm that the path name is included in the file name specified for the arc option. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05328-I
The hcmdsbasebackup processing has succeeded.
[Action]
The hcmdsbasebackup processing has succeeded.
-
KAPM05329-E
The hcmdsbasebackup processing has failed.
[Action]
The hcmdsbasebackup processing has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05330-E
An option is invalid.
[Action]
An option is invalid.
Check the options of the command.
-
KAPM05331-E
The license has expired.
[Action]
The license has expired.
Use a license key that has not expired.
-
KAPM05332-E
The system environment is incorrect.
[Action]
The system environment is incorrect.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05333-E
The entered license key is invalid.
[Action]
The entered license key is invalid.
Use a regular license key published by the license server.
-
KAPM05334-I
Processing ended normally.
[Action]
Processing ended normally.
-
KAPM05335-E
The license key file that was entered could not be found.
[Action]
The license key file that was entered could not be found.
Confirm that the specified path is valid.
-
KAPM05336-E
The license key file that was entered is invalid.
[Action]
The license key file that was entered is invalid.
The license key file that was input may be damaged. Contact the Support Center and acquire a new license key file.
-
KAPM05337-I
The license key that should be entered does not exist in the license key file.
[Action]
The license key that should be entered does not exist in the license key file.
Confirm that the specified license key file is correct.
-
KAPM05390-I
The hcmdsras processing has succeeded.
[Action]
The hcmdsras processing has succeeded.
-
KAPM05392-W
An attempt to get the System Log failed.
[Action]
An attempt to get the System Log failed.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05393-W
An attempt to get the Application Log failed.
[Action]
An attempt to get the Application Log failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05394-W
An attempt to get the Syslog Daemon configuration file failed.
[Action]
An attempt to get the Syslog Daemon configuration file failed.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05402-E
The option(s) specified is insufficient.
[Action]
The option(s) specified is insufficient.
Specify all the necessary options.
-
KAPM05403-E
The option value specified is invalid.
[Action]
The option value specified is invalid.
Specify the option and specify the necessary proceeding values (user name and password, etc.).
-
KAPM05405-E
The option "aa...aa" is not supported.
[Action]
The option "aa...aa" is not supported.
Do not specify an unsupported option.
aa...aa: Option
-
KAPM05406-E
The option "aa...aa" appears 2 times or more.
[Action]
The option "aa...aa" appears 2 times or more.
Check the specification of the option.
aa...aa: Option
-
KAPM05407-E
The combination of options is invalid.
[Action]
The combination of options is invalid.
Confirm that no option that should be specified exclusively is specified at the same time.
-
KAPM05410-E
An exception occurred.
[Action]
An exception occurred. See the following message KAPM49001-E for details.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05411-E
The file "aa...aa" could not be read.
[Action]
The file "aa...aa" could not be read.
Confirm that the file exists, that the file is not in use, and that the make directory of the file is correct.
aa...aa: File name
-
KAPM05413-E
The input XML contains a grammar mistake.
[Action]
The input XML contains a grammar mistake.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05414-E
A fatal structure error was detected in the input XML.
[Action]
A fatal structure error was detected in the input XML.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05415-E
An error occurred during communication processing. (Detail: aa...aa)
[Action]
An error occurred during communication processing. See the following message KAPM49001-E for details.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error details
-
KAPM05417-E
An invalid URL was detected. ( aa...aa )
[Action]
An invalid URL was detected.
Check the specification of the URL.
aa...aa: URL
-
KAPM05418-E
The server returned an empty response.
[Action]
The server returned an empty response.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05419-E
An unsupported element type was detected in the XML.
[Action]
An unsupported element type was detected in the XML.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05422-W
aa...aa error(s) were detected in the response.
[Action]
aa...aa error(s) were detected in the response.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Number of errors
-
KAPM05423-E
Invalid error information was detected.
[Action]
Invalid error information was detected.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05424-E
Invalid server information was detected.
[Action]
Invalid server information was detected.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05425-E
The input file contains a grammar mistake.
[Action]
The input file contains a grammar mistake.
Correct the syntax error in the specified definition file.
-
KAPM05426-E
An error occurred when inputting the file.
[Action]
An error occurred when inputting the file.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05427-E
The specified value is invalid. value = aa...aa
[Action]
The specified value is invalid.
Confirm the value in the user definition application file.
aa...aa: Value
-
KAPM05432-E
Link registration processing has failed. Processing is interrupted.
[Action]
Link registration processing has failed. Processing is interrupted.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05433-E
The acquisition as a result of registration processing has failed.
[Action]
The acquisition as a result of registration processing has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05434-E
I/O of XML has failed.
[Action]
I/O of XML has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05435-E
An error occurred in the SAX parser.
[Action]
An error occurred in the SAX parser.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05436-E
An attempt to analyze the execution result has failed.
[Action]
An attempt to analyze the execution result has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05437-E
The execution result of the XREP processing was null.
[Action]
The execution result of the XREP processing was null.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05438-W
The "aa...aa" xrep processing result is bb...bb.
[Action]
The "aa...aa" xrep processing result is bb...bb.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Result of hcmdsxrep command
bb...bb: Result of the command
-
KAPM05439-E
An attempt to register a link has failed.
[Action]
An attempt to register a link has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05440-E
An attempt to delete a link has failed.
[Action]
An attempt to delete a link has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05441-W
An attempt to check the result has failed.
[Action]
An attempt to check the result has failed.
Confirm the value in the user definition application file.
-
KAPM05442-E
The registered information was not found.
[Action]
The registered information was not found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05443-E
The table that registers a link does not exist.
[Action]
The table that registers a link does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05444-E
An error occurred within the server.
[Action]
An error occurred within the server.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05445-E
An unexpected error occurred within the server.
[Action]
An unexpected error occurred within the server.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05446-I
Processing ended normally.
[Action]
Processing ended normally.
-
KAPM05501-I
Backing up the database to file aa...aa...
[Action]
Backing up the database to file aa...aa.
aa...aa: File name
-
KAPM05502-I
INTERBASE_PID=aa...aa.
[Action]
INTERBASE_PID=aa...aa.
aa...aa: InterBase process ID
-
KAPM05503-W
The file aa...aa will be overwritten. Is this OK?
[Action]
The file aa...aa will be overwritten. Is this OK?
The continuation will overwrite the aa...aa.
aa...aa: File name
-
KAPM05504-W
The HiCommand Server database will be overwritten by this procedure. Is this OK?
[Action]
The HiCommand Base database will be overwritten by this procedure. Is this OK?
The continuation will overwrite the HiCommand Base database.
-
KAPM05505-E
The aa...aa file does not exist or is not readable.The HiCommand Server database was not altered.
[Action]
The aa...aa file does not exist or is not readable. The HiCommand Base database was not altered.
Confirm that aa...aa file exists. Alternatively, check the permission of the aa...aa file.
aa...aa: File name
-
KAPM05506-E
The aa...aa file does not exist or is not readable.The HiCommand Server database was not altered.
[Action]
The aa...aa file does not exist or is not readable. The HiCommand Base database was not altered.
Confirm that the aa...aa file exists.
aa...aa: File name
-
KAPM05507-I
Restoring the database from the aa...aa file...
[Action]
Restoring the database from the aa...aa file...
aa...aa: File name
-
KAPM05508-E
The path of the specified database file is invalid.
[Action]
The path of the specified database file is invalid.
Check the value of DATABASE.path in the configuration file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris or Linux : /opt/HiCommand/Base/conf/user.conf
-
KAPM05509-E
The specified database file was not found.
[Action]
The specified database file was not found.
Check the value of DATABASE.path in the configuration file.
Windows : <HiCommand Suite Common Component installation-folder>\conf\user.conf
Solaris or Linux : /opt/HiCommand/Base/conf/user.conf
-
KAPM05510-E
An attempt to read to a file has failed. file name=aa...aa.
[Action]
An attempt to read to a file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM05511-E
An unexpected error occurred.
[Action]
An unexpected error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05512-I
Backup has succeeded.
[Action]
Backup has succeeded.
-
KAPM05513-E
An attempt to back up has failed.
[Action]
An attempt to back up has failed.
Take action according to the message output in the window after command execution.
-
KAPM05514-I
Restoration has succeeded.
[Action]
Restoration has succeeded.
-
KAPM05515-E
An attempt to restore has failed.
[Action]
An attempt to restore has failed.
Take action according to the message output in the window after command execution.
-
KAPM05516-E
The setup of the specified database is invalid.
[Action]
The setup of the specified database is invalid.
Make sure the setting for the key that the file DATABASE starts is correct.
Windows:
HiCommand Suite Common Component installation-folder\conf\user.conf
Solaris: /opt/HiCommand/Base/conf/user.conf
-
KAPM05530-I
Backup of the database has started.
[Action]
Backup of the database has started.
-
KAPM05531-I
Backup of the database has ended.
[Action]
Backup of the database has ended.
-
KAPM05532-I
Restoration of the database has started.
[Action]
Restoration of the database has started.
-
KAPM05533-I
Restoration of the database has ended.
[Action]
Restoration of the database has ended.
-
KAPM05534-I
The database will now be backed up to file aa...aa.
[Action]
The database will now be backed up to file aa...aa.
aa...aa: Backup file
-
KAPM05535-I
The system area has been damaged. Do you want to recover the system? [y or n]
[Action]
The system area has been damaged. Please select whether to restore this system. Enter y (for yes) or n (for do not).
-
KAPM05536-I
Please press the Enter key.
[Action]
Please press the Enter key.
-
KAPM05537-I
Stop the HiRDB service before restoring the database.
[Action]
Stop the HiRDB service before restoring the database.
-
KAPM05538-I
Re-creation of the system area has started.
[Action]
Re-creation of the system area has started.
-
KAPM05539-I
Re-creation of the system area has ended.
[Action]
Re-creation of the system area has ended.
-
KAPM05540-I
Re-creation of the RD area has started.
[Action]
Re-creation of the RD area has started.
-
KAPM05541-I
Re-creation of the RD area has ended.
[Action]
Re-creation of the RD area has ended.
-
KAPM05544-E
An attempt to back up the database has failed.
[Action]
An attempt to back up the database has failed.
Confirm that there are no errors in the directory specification. If there are no errors, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05545-E
An attempt to restore the database has failed.
[Action]
An attempt to restore the database has failed.
Confirm that there are no errors in the directory specification. If there are no errors, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05546-W
The backed-up version is different from the version in the current environment.
[Action]
The backed-up version is different from the version in the current environment.
-
KAPM05547-I
Do you want to continue and restore the database?
[Action]
Do you want to continue and restore the database?
-
KAPM05548-I
Restoration of the database will continue.
[Action]
Restoration of the database will continue.
-
KAPM05550-E
The option(s) specified is invalid.
[Action]
The option(s) specified is invalid.
Specify the option correctly.
-
KAPM05551-E
An attempt to execute the aa...aa command has failed.
[Action]
An attempt to execute the aa...aa command has failed.
Confirm that there are no syntax errors in the command specification. If there are no syntax errors, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
-
KAPM05552-E
HiRDB has not been installed.
[Action]
HiRDB has not been installed.
Make sure that HiRDB has been installed.
-
KAPM05553-E
The RD area of the specified program type could not be found.
[Action]
The RD area of the specified program type could not be found.
Make sure that HiRDB has been set up.
-
KAPM05554-E
The file aa...aa could not be deleted.
[Action]
The file aa...aa could not be deleted.
aa...aa: File name
-
KAPM05555-E
An attempt to set the environment variable has failed.
[Action]
An attempt to set the environment variable has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05556-E
An attempt to create the backup file has failed.
[Action]
An attempt to create the backup file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05557-E
An I/O error occurred.
[Action]
An I/O error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05558-E
An attempt to open the archive file has failed.
[Action]
An attempt to open the archive file has failed.
Confirm that there are no errors in the file specification. If there are no errors, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05559-E
The backup file format is invalid.
[Action]
The backup file format is invalid.
Specify a valid backup file.
-
KAPM05560-E
The database location of the specified program type has not been created.
[Action]
The database location of the specified program type has not been created.
Make sure that the specified application is installed.
-
KAPM05561-I
The database was backed up successfully.
[Action]
The database was backed up successfully.
-
KAPM05562-E
An attempt to back up the database has failed.
[Action]
An attempt to back up the database has failed.
-
KAPM05563-I
The database was completely restored.
[Action]
The database was completely restored.
-
KAPM05564-E
An attempt to completely restore the database has failed.
[Action]
An attempt to completely restore the database has failed.
-
KAPM05565-I
The database was partially restored.
[Action]
The database was partially restored.
-
KAPM05566-E
An attempt to partially restore the database has failed.
[Action]
An attempt to partially restore the database has failed.
-
KAPM05567-E
An exception occurred.
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05568-E
aa...aa:bb...bb
[Action]
Message for debugging.
aa...aa: Command name
bb...bb: Message
-
KAPM05569-E
aa...aa
[Action]
Message for debugging.
aa...aa: Command name
-
KAPM05570-I
Processing ended normally.
[Action]
Processing ended normally.
-
KAPM05573-E
The option(s) specified is invalid.
[Action]
The option(s) specified is invalid.
Specify the option correctly.
-
KAPM05574-E
An attempt to execute the aa...aa command has failed.
[Action]
An attempt to execute the aa...aa command has failed.
Confirm that there are no syntax errors in the command specification. If there are no syntax errors, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
-
KAPM05575-E
HiRDB has not been installed.
[Action]
HiRDB has not been installed.
Confirm that HiRDB has already installed.
-
KAPM05576-E
The RD area of the specified program type could not be found.
[Action]
The RD area of the specified program type could not be found.
Confirm that HiRDB has already set up.
-
KAPM05577-E
An attempt to clear an HiRDB environment variable has failed.
[Action]
An attempt to clear an HiRDB environment variable has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05578-E
The database location of the specified program type has not been created.
[Action]
The database location of the specified program type has not been created.
Make sure that the specified application is installed.
-
KAPM05579-E
An exception occurred.
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05580-I
Re-creation of the database has started.
[Action]
Re-creation of the database has started.
-
KAPM05581-I
Re-creation of the database has ended.
[Action]
Re-creation of the database has ended.
-
KAPM05582-I
Unsetup of aa...aa has started.
[Action]
Unsetup of aa...aa has started.
aa...aa: Product name
-
KAPM05583-I
Unsetup of aa...aa has ended.
[Action]
Unsetup of aa...aa has ended.
aa...aa: Product name
-
KAPM05584-I
Setup of aa...aa has started.
[Action]
Setup of aa...aa has started.
aa...aa: Product name
-
KAPM05585-I
Setup of aa...aa has ended.
[Action]
Setup of aa...aa has ended.
aa...aa: Product name
-
KAPM05586-I
Execution of the aa...aa command has started.
[Action]
Execution of the aa...aa command has started.
aa...aa: Command name
-
KAPM05587-I
Execution of the aa...aa command ended normally.
[Action]
Execution of the aa...aa command ended normally.
aa...aa: Command name
-
KAPM05588-I
Backup of the parameter definition file has ended.
[Action]
Backup of the parameter definition file has ended.
-
KAPM05589-I
The backup file of the parameter definition file has been deleted.
[Action]
The backup file of the parameter definition file has been deleted.
-
KAPM05590-E
The option(s) specified is invalid.
[Action]
The option(s) specified is invalid.
Specify the option correctly.
-
KAPM05591-E
An attempt to execute the aa...aa command has failed.
[Action]
An attempt to execute the aa...aa command has failed.
Confirm that there are no syntax errors in the command specification. If there are no syntax errors, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
-
KAPM05592-E
HiRDB has not been set up.
[Action]
HiRDB has not been set up.
Confirm that HiRDB has already set up.
-
KAPM05593-E
The aa...aa file was not found.
[Action]
The aa...aa file was not found.
Confirm that HiRDB is set up. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM05594-E
The aa...aa file could not be read.
[Action]
The aa...aa file could not be read.
Confirm that HiRDB is set up. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM05595-E
The aa...aa folder could not be deleted.
[Action]
The aa...aa folder could not be deleted.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Folder name
-
KAPM05596-E
An SQL exception occurred.
[Action]
An SQL exception occurred.
Confirm that HiRDB is running. If HiRDB is running, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05597-E
An attempt to clear the HiRDB system environment variables has failed.
[Action]
An attempt to clear the HiRDB system environment variables has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05598-E
An exception occurred.
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05599-E
aa...aa:bb...bb
[Action]
aa...aa : Command name
bb...bb : Message
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
bb...bb: Message
-
KAPM05601-I
The acquisition of HiRDB detail logs has started.
[Action]
The acquisition of HiRDB detail logs has started.
-
KAPM05602-I
The acquisition of HiRDB detail logs was successful.
[Action]
The acquisition of HiRDB detail logs was successful.
-
KAPM05603-I
The acquisition of the HiRDB RDAREA has started.
[Action]
The acquisition of the HiRDB RDAREA has started.
-
KAPM05604-I
The acquisition of the HiRDB RDAREA was successful.
[Action]
The acquisition of the HiRDB RDAREA was successful.
-
KAPM05605-I
The acquisition of the table data has started.
[Action]
The acquisition of the table data has started.
-
KAPM05606-I
The acquisition of the table data was successful.
[Action]
The acquisition of the table data was successful.
-
KAPM05607-E
The command aa...aa is executing in another process.
[Action]
The command is executing in another process.
After the command executing in the other process finishes, re-execute the command.
aa...aa: Command name
-
KAPM05608-E
The wait for the end of the command aa...aa has failed.
[Action]
The wait for the end of the command executing in another process has failed.
Re-execute the command. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
-
KAPM05609-E
The command aa...aa timed out and ended.
[Action]
The command executing in another process timed out.
Re-execute the command. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
-
KAPM05610-I
The specified product is a version for which registration data can be moved. (This was determined by comparing the versions of the specified product and the product to be installed.)
[Action]
The specified product is a version for which registration data can be moved. (This was determined by comparing the versions of the specified product and the product to be installed.)
-
KAPM05611-E
The specified product is a version for which registration data cannot be moved. (This was determined by comparing the versions of the specified product and the product to be installed.)
[Action]
The specified product is a version for which registration data cannot be moved. (This was determined by comparing the versions of the specified product and the product to be installed.)
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05612-E
The version of the specified product could not be acquired. (product name = aa...aa)
[Action]
An attempt to execute the version acquisition function has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Product name
-
KAPM05613-E
The format of the version number file for the specified product is invalid.
[Action]
The format of the version number file for the specified product is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05614-E
The specified product is not installed. (product name = aa...aa)
[Action]
The product specified by the version check command is not installed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Product name
-
KAPM05615-E
An internal error occurred: aa...aa
[Action]
An internal error occurred. A detailed message to pinpoint the cause is displayed in the log.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Detailed message
-
KAPM05616-E
The number of specified options is invalid.
[Action]
The number of options to specify in the version check function is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05617-E
The contents of the version file are invalid.
[Action]
The version number file contains characters that are not numbers.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05618-I
The hcmdsppcheck command has started.
[Action]
The version check function has started.
-
KAPM05619-I
The hcmdsppcheck command has ended.
[Action]
The version check function has ended.
-
KAPM05620-I
The hcmdsppvrs command was successful.
[Action]
The version acquisition function was successful.
-
KAPM05621-E
The hcmdsppvrs command failed.
[Action]
An attempt to execute the version acquisition function has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05622-E
Initialization of the log failed.
[Action]
Initialization of the log failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05623-E
An attempt to assign memory to store the log file path has failed.
[Action]
An attempt to assign memory to store the log file path has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05624-E
An attempt to acquire the installation path has failed.
[Action]
An attempt to acquire the installation path has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05625-E
The product names do not match.
[Action]
The product name specified by the
version check function does not match the registered product name.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05626-E
The product name is not specified.
[Action]
The product name that must be specified by the version check function is not specified.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05627-E
There is no version number file.
[Action]
There is no version number file in the location specified by the version check function.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05628-I
A file already exists at the specified output destination.
[Action]
Upgrade permission file already exists.
-
KAPM05629-E
A folder already exists at the specified output destination.
[Action]
A folder already exists at the output destination specified by the version check function.
After deleting the output destination folder, re-execute the command, or specify an empty directory.
-
KAPM05630-E
There is no registry key for HBase.
[Action]
There is no registry key for HBase.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05640-I
The user ID and password were changed successfully.
[Action]
The specified user ID and password were changed successfully.
-
KAPM05641-I
There is no password file to reference.
[Action]
The password file that writes the user ID and password was not found.
-
KAPM05642-W
Neither the user ID nor the password was changed.
[Action]
The specified user ID and password are the same as before.
Specify a new (different) ID and password.
-
KAPM05643-E
The format of the password file is invalid.
[Action]
The password file might have been corrupted.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05644-E
An attempt to change the user ID and password has failed.
[Action]
An attempt to change the specified user ID and password failed because an error occurred.
Check the preceding log.
-
KAPM05645-E
An option is invalid.
[Action]
Please make sure the specification of the option is correct.
Specify the option correctly, and execute the command again.
-
KAPM05646-E
The specified argument contains an invalid character.
[Action]
An invalid character was specified in the option.
Enter valid characters only.
-
KAPM05647-E
An attempt to acquire the HiCommand Suite Common Component installation path has failed.
[Action]
An attempt to acquire the HiCommand Suite Common Component installation path has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05648-E
An attempt to initialize the log has failed.
[Action]
An attempt to initialize the log has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05649-E
An internal error occurred.
[Action]
An internal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05650-E
A fatal error occurred.
[Action]
A fatal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05654-E
An attempt to output the password file has failed.
[Action]
An error occurred during processing to write to the password file.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05655-E
The character string specified by the option is too long.
[Action]
The character string specified by the option exceeds the maximum number of characters.
Enter a character string that is within the maximum number of characters.
-
KAPM05656-E
The character string specified by the option is too short.
[Action]
The length of the character string specified by the option is less than the minimum number of characters.
Enter a character string that is at least the minimum number of characters.
-
KAPM05657-I
The hcmdschangeaccount command has started.
[Action]
The hcmdschangeaccount command has started.
-
KAPM05658-I
The hcmdschangeaccount command has ended.
[Action]
The hcmdschangeaccount command has ended.
-
KAPM05659-E
The program product specified by the type option is invalid.
[Action]
The value specified for the type option is invalid.
Enter a correct value.
-
KAPM05660-E
The user ID specified by the newid option is invalid.
[Action]
The value specified for the newid option is invalid.
Enter a correct value.
-
KAPM05661-E
The password specified by the newpass option is invalid.
[Action]
The value specified for the newpass option is invalid.
Enter a correct value.
-
KAPM05662-E
An attempt to read the password file has failed.
[Action]
An error occurred during processing to load the password file.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05663-E
The specified user already exists.
[Action]
The specified user already exists.
Please execute it again after changing the user name.
-
KAPM05672-I
The memory size was changed successfully.
[Action]
The memory size was changed successfully.
-
KAPM05673-E
An attempt to change the memory size has failed.
[Action]
An attempt to change the memory size has failed.
Check the message output before or after this message, and take action appropriate to that message.
-
KAPM05674-E
A fatal error occurred during processing.
[Action]
A fatal error occurred during processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05675-E
The service is running.
[Action]
The service is running.
Stop the service, and then execute the command again.
-
KAPM05676-E
In a Windows x32 environment, the memory size cannot be changed to Large.
[Action]
In a Windows x32 environment, the memory size cannot be changed to Large.
Specify a valid option to execute the command.
-
KAPM05677-E
The parameter is invalid.
[Action]
The parameter is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05678-I
The current memory size is aa...aa.
[Action]
The current memory size is displayed.
aa...aa: Memory size
-
KAPM05679-E
The current memory size is unknown.
[Action]
The current memory size is unknown.
Use the hcmdschgheap command to reset the memory size.
-
KAPM05680-E
An option is invalid.
[Action]
An option is invalid.
Specify a valid option, and then re-execute the command.
-
KAPM05681-E
An entered argument is invalid.
[Action]
An entered argument is invalid.
Specify an appropriate argument.
-
KAPM05682-E
The specified options are insufficient.
[Action]
A necessary option is not specified.
Specify a valid option, and then try again.
-
KAPM05683-E
The value specified for an option is invalid. (option = aa...aa)
[Action]
The value specified for an option is invalid. (option = aa...aa)
Check the value specified for the option.
aa...aa: Option
-
KAPM05684-E
The specified value is invalid. (value = aa...aa)
[Action]
The specified value is invalid. (value = aa...aa)
Specify an appropriate value.
aa...aa: Value
-
KAPM05685-E
The hcmds.home value cannot be acquired.
[Action]
The hcmds.home value cannot be acquired.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05686-E
An attempt to load the file has failed. (file = aa...aa)
[Action]
An attempt to load the file has failed. (file = aa...aa)
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM05687-I
Processing ended normally.
[Action]
Processing ended normally.
-
KAPM05688-E
Execution of the hcmdsweb command has failed.
[Action]
Execution of the hcmdsweb command has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05689-E
Execution of the hcmdsweb2 command has failed.
[Action]
Execution of the hcmdsweb2 command has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05690-E
In Windows x86 version, you cannot specify Large.
[Action]
In Windows x86 version, you cannot specify Large.
Specify a valid option, and then re-execute the command.
-
KAPM05691-E
Command execution failed because services were running.
[Action]
Command execution failed because services were running.
Stop all Suite products, Single Sign On Server, and Common Web Service, and then re-execute the command.
-
KAPM05692-E
The command cannot be executed because multiple containers are not registered.
[Action]
The command cannot be executed because multiple containers are not registered.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05699-E
An exception occurred.
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05802-E
The option is invalid.
[Action]
The option is invalid.
Specify the option correctly.
-
KAPM05803-E
The specified arguments are insufficient.
[Action]
The specified arguments are insufficient.
Specify the option correctly.
-
KAPM05804-E
The specified value of option is invalid. (Option = aa...aa)
[Action]
The specified value of option is invalid.
Check the specified value of the option.
aa...aa: Option name
-
KAPM05805-E
The specified directory cannot be created. (directory = aa...aa)
[Action]
The specified directory cannot be created.
Make sure that you have write permission for the directory.
aa...aa: Directory name
-
KAPM05806-E
The specified directory name already existed as a file. (file = aa...aa)
[Action]
The specified directory name already existed as a file.
Specify another directory name.
aa...aa: File name
-
KAPM05807-E
The specified value is invalid. (value = aa...aa)
[Action]
The specified value is invalid.
Specify a valid value.
aa...aa: Specified value
-
KAPM05808-E
The file aa...aa does not exist.
[Action]
The file aa...aa does not exist.
Confirm that there are no errors in the file specification. If there are no errors, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM05809-E
The directory aa...aa does not exist.
[Action]
The directory aa...aa does not exist.
Confirm that there are no errors in the file specification. If there are no errors, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Directory name
-
KAPM05810-E
The file aa...aa already exists.
[Action]
The file aa...aa already exists.
Delete the file, or move to another directory.
aa...aa: File name
-
KAPM05811-E
Command aa...aa returns value bb...bb. The error message is cc...cc.
[Action]
Command aa...aa returns value bb...bb. The error message is cc...cc.
Confirm that the value specified for the option is correct. If the value is correct, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
bb...bb: Return code
cc...cc: Error message
-
KAPM05812-I
Processing ended normally.
[Action]
Processing ended normally.
-
KAPM05813-E
An IOException occurred. (details = aa...aa)
[Action]
An IOException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception details
-
KAPM05814-E
An exception occurred. (details = aa...aa)
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception details
-
KAPM05815-E
A NullPointerException occurred. (details = aa...aa)
[Action]
A NullPointerException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception details
-
KAPM05816-E
An error occurred while executing the hcmdsauthmode command.
[Action]
An error occurred while executing the hcmdsauthmode command.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05817-E
There is no RD area in the system.
[Action]
There is no RD area in the system.
Make sure that the HiCommand product has been installed.
-
KAPM05818-I
The hcmdsauthmove command has started.
[Action]
The hcmdsauthmove command has started.
-
KAPM05819-I
Processing to import data has started.
[Action]
Processing to import data has started.
-
KAPM05820-I
Processing to import data has ended.
[Action]
Processing to import data has ended.
-
KAPM05821-I
Processing to export data has started.
[Action]
Processing to export data has started.
-
KAPM05822-I
Processing to export data has ended.
[Action]
Processing to export data has ended.
-
KAPM05823-E
HiRDB has not started.
[Action]
HiRDB has not started.
Start HiRDB.
-
KAPM05824-E
The directory aa...aa already exists.
[Action]
The directory aa...aa already exists.
Specify another directory.
aa...aa: Directory name
-
KAPM05825-E
An HSSOException occurred. (details = aa...aa)
[Action]
An HSSOException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception details
-
KAPM05826-E
A CIMException occurred. (details = aa...aa)
[Action]
A CIMException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception details
-
KAPM05827-E
The specified directory is not empty. (directory name = aa...aa)
[Action]
The specified directory is not empty.
Specify an empty directory.
aa...aa: Directory name
-
KAPM05828-E
An attempt to execute the hcmdsauthmove command has failed.
[Action]
An attempt to execute the hcmdsauthmove command has failed.
See the message KAPMxxxxx-E.
-
KAPM05829-E
A fatal error occurred.
[Action]
A fatal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05830-E
An attempt to establish a connection has failed.
[Action]
An attempt to establish a connection has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05831-E
An attempt to execute SQL has failed.
[Action]
An attempt to execute SQL has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05832-I
The authentication data was backed up successfully.
[Action]
The authentication data was backed up successfully.
-
KAPM05833-E
An attempt to back up the authentication data has failed.
[Action]
An attempt to back up the authentication data has failed.
-
KAPM05834-I
The authentication data was restored successfully.
[Action]
The authentication data was restored successfully.
-
KAPM05835-E
An attempt to restore the authentication data has failed.
[Action]
An attempt to restore the authentication data has failed.
-
KAPM05836-E
An attempt to acquire the physical table name has failed. (table name = aa...aa)
[Action]
The physical table name was not requested from the logical table name.
Confirm that the DBMS is running, and then retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Table name
-
KAPM05837-W
The column data exceeds 80 characters. (column data = aa...aa)
[Action]
The column data of the TNB_AccountUser table could not be reduced to within 80 characters.
aa...aa: Column data
-
KAPM05838-E
An attempt to execute the SQL has failed. (SQL = aa...aa, error code = bb...bb)
[Action]
An attempt to execute the SQL has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Executed SQL statement
bb...bb: Error code
-
KAPM05840-E
The option is invalid.
[Action]
The option is invalid.
Specify correct options, and then re-execute the command.
-
KAPM05841-E
The option is invalid. Code=[aa...aa], Data=[bb...bb]
[Action]
The option is invalid.
Specify correct options, and then re-execute the command.
aa...aa: Generated code
bb...bb: Generated option and value
-
KAPM05842-I
hcmdsbanner [aa...aa]{,[bb...bb],......[.....]}
[Action]
The options specified for the command will be displayed.
aa...aa: Command line argument
bb...bb: Command line argument
-
KAPM05843-E
The message file does not exist.
[Action]
The message file specified in the "file" option does not exist.
Please specify the correct file, and then execute the command.
-
KAPM05844-E
The path specified for the message file is not a file.
[Action]
The path of the message file specified in the "file" option is not a file.
Please specify the correct file, and then execute the command.
-
KAPM05845-E
The message exceeded 1000 characters.
[Action]
The message of the message file specified in the "file" option exceeded 1,000 characters.
Please keep the message to 1,000 characters or less.
-
KAPM05846-E
The path specified in the aa...aa option is not an absolute path.
[Action]
The path specified in the aa...aa option is not an absolute path.
Specify the absolute path, and then try again.
aa...aa: Option
-
KAPM05850-E
An attempt to set the banner message display has failed.
[Action]
An attempt to set the banner message has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05851-E
An attempt to set the banner message display has failed. File = [aa...aa], Code = [bb...bb]
[Action]
An attempt to set the banner message has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File or directory
bb...bb: Generated code
-
KAPM05852-I
Setting of the banner message display has been completed.
[Action]
The setting of the banner message has been completed.
-
KAPM05860-W
The banner message display has already been cancelled.
[Action]
The banner message has already been deleted.
-
KAPM05861-E
An attempt to cancel the banner message display has failed.
[Action]
An attempt to delete the banner message has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05862-E
An attempt to cancel the banner message display has failed. File = [aa...aa], Code=[bb...bb]
[Action]
An attempt to delete the banner message has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File or directory
bb...bb: Generated code
-
KAPM05863-I
Cancellation of the banner message display has been completed.
[Action]
The banner message has been released.
-
KAPM05876-E
A fatal error occurred during processing.
[Action]
A fatal error occurred during processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05879-E
aa...aa
[Action]
Information for debugging.
aa...aa: Information for debugging
-
KAPM05880-E
The value of EXCurrentVersion is invalid.
[Action]
The value of EXCurrentVersion is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05881-E
EXCurrentVersion does not exist.
[Action]
EXCurrentVersion does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05882-E
The registry key that must be acquired does not exist.
[Action]
The registry key that must be acquired does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05883-E
A fatal error occurred.
[Action]
A fatal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05884-E
The version management file is invalid
[Action]
The version management file is invalid
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05885-E
The version management file that must be acquired does not exist.
[Action]
The version management file that must be acquired does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05886-E
An attempt to acquire the version has failed.
[Action]
An attempt to acquire the version has failed.
Make sure that the product has been correctly installed. If it has been, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05887-I
The hcmdsvrsutil utility was successful.
[Action]
The processing of the version acquisition function was succeeded.
-
KAPM05890-I
The hcmdsbasevrs command was successful.
[Action]
The version display function was successful.
-
KAPM05891-E
The sub-key that shows the version does not exist.
[Action]
The sub-key that shows the version does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05892-I
The hcmdsbasevrs command has started.
[Action]
The version display function has started.
-
KAPM05893-I
The hcmdsbasevrs command has ended.
[Action]
The version display function has ended.
-
KAPM05894-E
A fatal error occurred.
[Action]
A fatal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05895-E
The registry key that must be acquired does not exist.
[Action]
The registry key that must be acquired does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05896-E
Initialization of the log failed.
[Action]
Initialization of the log failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05897-E
An attempt to acquire the installation path has failed.
[Action]
An attempt to acquire the installation path has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05898-E
An attempt to create the log file path has failed.
[Action]
An attempt to create the log file path has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05899-E
There is no registry key for HBase.
[Action]
There is no registry key for HBase.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05900-I
The hcmdsdbtrans command has started.
[Action]
The hcmdsdbtrans command has started.
-
KAPM05901-I
The hcmdsdbtrans command ended normally.
[Action]
The hcmdsdbtrans command ended normally.
-
KAPM05902-E
An option is invalid.
[Action]
An option is invalid.
Specify correct options, and then re-execute the command.
-
KAPM05903-E
An option is invalid. Code=[aa...aa], Data=[bb...bb]
[Action]
An option is invalid.
Specify correct options, and then re-execute the command.
aa...aa: Code indicating generation location
bb...bb: Generated option and value
-
KAPM05904-I
hcmdsdbtrans [aa...aa]{,[bb...bb],......[.....]}
[Action]
The options specified for the command are displayed.
aa...aa: Command line argument
bb...bb: Command line argument
-
KAPM05905-E
The path specified in the aa...aa option is not an absolute path.
[Action]
The path specified in the aa...aa option is not an absolute path.
Specify the absolute path, and then try again.
aa...aa: Option
-
KAPM05909-E
An unexpected exception occurred.
[Action]
An unexpected exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05910-E
An attempt to acquire the version of aa...aa has failed.
[Action]
An attempt to acquire the version of the installed aa...aa failed.
Make sure that the product has been properly installed. If an error still occurs after taking the above action, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Product name
-
KAPM05911-E
aa...aa is a version that cannot be registered.
[Action]
The aa...aa data in the registration data cannot be registered because the data cannot be used with the installed aa...aa version.
Change the installed aa...aa version to the version used when the registration data was created, or to a version for which the registration data can be moved.
If operation is possible without registering the aa...aa data, exclude this data and register the data for the other products.
aa...aa: Product name
-
KAPM05912-I
aa...aa cannot be registered because it is not installed.
[Action]
aa...aa cannot be registered because it is not installed.
If the aa...aa data is necessary, install aa...aa, and then re-execute the command.
aa...aa: Product name
-
KAPM05913-E
Processing to register aa...aa will stop because it is not installed.
[Action]
Processing to register data will stop because aa...aa, specified in the type option, is not installed.
If registration of aa...aa is necessary, install aa...aa and then re-execute the command.
If operation is possible without registering the aa...aa data, exclude this data and register the data for the other products.
aa...aa: Product name
-
KAPM05914-E
Processing to register aa...aa will stop because it is not in the registration data.
[Action]
Processing to register data will stop because aa...aa, specified in the type option, is not in the registration data.
Use the type option to specify only the products that are included in the archive file or in the directory specified by the workpath option.
aa...aa: Product name
-
KAPM05915-E
An attempt was made to register primary server data into the secondary server.
[Action]
An attempt was made to register primary server data into the secondary server.
Check the data to be imported.
-
KAPM05916-E
An attempt was made to register secondary server data into the primary server.
[Action]
An attempt was made to register secondary server data into the primary server.
Check the data to be imported and the setting of the server to which the data is to be imported.
-
KAPM05917-E
An attempt to import the database has failed.
[Action]
An attempt to import the database has failed.
Re-execute the command. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05918-E
An attempt to export the database has failed.
[Action]
An attempt to export the database has failed.
Re-execute the command. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05919-E
The hcmdsdbtrans command cannot be executed because the database is currently in use.
[Action]
The hcmdsdbtrans command cannot be executed because the database is currently in use.
Stop the Hitachi Command Suite product connected to HiRDB, and then retry the operation.
Even after retrying the operation, if the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05920-E
The archive file specification is incorrect.
[Action]
The archive file name specified in the file option is incorrect.
Revise the path specified in the command option.
-
KAPM05921-E
An attempt to extract the archive file has failed.
[Action]
An attempt to extract the archive file specified in the file option has failed.
Make sure that the following conditions are met:
- The capacity of the disk used for the directory specified by the workpath option is sufficient.
- The archive file is for the hcmdsdbtrans command.
If an error still occurs after taking the above action, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05922-E
An attempt to create an archive file has failed.
[Action]
An attempt to create an archive file has failed.
Allocate enough disk space for the archive file storage destination. If an error occurs while allocating disk space, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05923-E
An archive file cannot be created because the data exceeds 2 GB.
[Action]
You cannot create the archive file because data has exceeded 2 GB.
For the workpath option, specify the data that is stored in the directory specified by the workpath option, and then import the data.
-
KAPM05924-E
The work directory specification is incorrect.
[Action]
The work directory specification is incorrect.
Revise the path specified in the workpath option.
-
KAPM05925-E
The work directory is not empty.
[Action]
The work directory is not empty.
Specify an empty directory or uncreated directory as the work directory.
-
KAPM05926-E
The format of the registration data in the work directory is incorrect.
[Action]
A file or directory required by the hcmdsdbtrans command is not in the work directory specified by the workpath option.
- If the file option is specified
Check whether the specified archive file is an hcmdsdbtrans command archive file.
- If the file option is not specified
Check whether the entire contents of the directory specified for the work path option during an export operation are saved in the directory specified for the work path option.
Even after the above action, if the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05927-E
DBMS is not running.
[Action]
Data I/O cannot be performed because the DBMS is not running.
Start the DBMS by using the hcmdsdbsrv command.
-
KAPM05928-E
DBMS is not set up.
[Action]
Data I/O cannot be performed because the DBMS is not set up.
Make sure the installation status of the product is correct.
-
KAPM05929-W
An attempt to delete the work directory has failed.
[Action]
An attempt to delete a file or directory made in the work directory has failed.
Please delete the work directory.
-
KAPM05930-I
aa...aa will now be exported.
[Action]
aa...aa will now be exported.
aa...aa: "The application data" or "The authentication data"
-
KAPM05931-I
aa...aa has been exported.
[Action]
aa...aa has been exported.
aa...aa: "The application data" or "The authentication data"
-
KAPM05932-I
aa...aa has been deleted from the authentication data.
[Action]
aa...aa has been deleted from the authentication data.
aa...aa: Product name
-
KAPM05933-I
The archive file will now be created.
[Action]
The archive file will now be created.
-
KAPM05934-I
The archive file has been created.
[Action]
The archive file has been created.
-
KAPM05935-I
The archive file will now be extracted.
[Action]
The archive file will now be extracted.
-
KAPM05936-I
The archive file has been extracted.
[Action]
The archive file has been extracted.
-
KAPM05937-I
aa...aa will now be imported.
[Action]
aa...aa will now be imported.
aa...aa: "The application data" or "The authentication data"
-
KAPM05938-I
aa...aa has been imported.
[Action]
aa...aa has been imported.
aa...aa: "The application data" or "The authentication data"
-
KAPM05939-E
aa...aa
[Action]
See the preceding detailed error message.
Take action according to the preceding message.
aa...aa: Details from the time of the error
-
KAPM05950-E
The specified product is not supported.
[Action]
The product specified by the version acquisition function is not supported.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05951-E
The sub-key that shows the version does not exist.
[Action]
There is no sub-key that indicates the version.
Make sure that the product has been correctly installed. If it has been, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05952-E
The specified product is not installed.
[Action]
The product specified by the version acquisition function is not installed.
Please install the product specified by the option.
-
KAPM05953-I
The processing of the hcmdsvrsutil library succeeded.
[Action]
The processing of the version acquisition function succeeded.
-
KAPM05954-E
The product name is not specified.
[Action]
The product name is not specified.
Please specify the product name, and then re-execute the command.
-
KAPM05955-E
The product names do not match.
[Action]
The product names do not match.
Please specify the correct product name, and then re-execute the command.
-
KAPM05956-E
The processing of the hcmdsvrsutil library failed.
[Action]
The processing of the version acquisition function failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05957-E
There is no registry key for the specified product.
[Action]
There is no registry key for the product specified by the version acquisition function.
Make sure that the product has been correctly installed. If it has been, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05958-E
An attempt to acquire the sub-key that shows the version of the specified product has failed.
[Action]
There is no sub-key that indicates the version of the product specified by the version acquisition function.
Make sure that the product has been correctly installed. If it has been, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05959-E
The file that stores the installation path is invalid.
[Action]
The file that stores the installation path is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05970-I
The hcmdsppvrs command was successful.
[Action]
The version acquisition function was successful.
-
KAPM05971-E
The specified product is not installed. (product name = aa...aa)
[Action]
The product specified by the version acquisition function is not installed.
Please install the specified product.
aa...aa: Product name
-
KAPM05972-E
An attempt to acquire version information for the specified product has failed.
[Action]
The version of the product specified by the version acquisition function could not be acquired.
Make sure that the product has been correctly installed. If it has been, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM05973-I
The hcmdsppvrs command has started.
[Action]
The version acquisition function started.
-
KAPM05974-I
The hcmdsppvrs command has ended.
[Action]
The version acquisition function ended.
-
KAPM05975-E
A fatal error occurred.
[Action]
A fatal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05976-E
Log initialization failed.
[Action]
Initialization of the log failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05977-E
Initialization of the installation path has failed.
[Action]
Initialization of the installation path failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05978-E
An attempt to assign memory to store the log file path has failed.
[Action]
An attempt to assign memory to store the log file path has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05979-E
The number of specified options is invalid.
[Action]
The number of options specified by the version acquisition function is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05980-E
A file already exists at the specified output destination.
[Action]
The file already exists at the output destination specified by the version acquisition function.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05981-E
A folder already exists at the specified output destination.
[Action]
The folder already exists at the output destination specified by the version acquisition function.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05982-E
The file-creation function failed.
[Action]
The function that creates the file for writing the version value failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05983-E
The file-writing function failed.
[Action]
The function that writes the version value to the file failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05984-I
The version was successfully acquired. (product name = aa...aa, version = bb...bb)
[Action]
The version acquisition was successful.
aa...aa: Product name
bb...bb: Version
-
KAPM05985-E
An attempt to acquire the version has failed. (product name = aa...aa)
[Action]
An attempt to acquire the version has failed.
Make sure that the product has been correctly installed. If it has been, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Product name
-
KAPM05986-E
A fatal error occurred: aa...aa
[Action]
A fatal error occurred. A detailed message showing the cause is output.
Make sure the specified product is supported. If it is supported, the specified product name might be incorrect; so enter the correct product name, and then re-execute the command.
aa...aa: Detailed message
-
KAPM05987-I
The processing of the hcmdsvrsutil library succeeded.
[Action]
The processing of the version acquisition function succeeded.
-
KAPM05988-E
The processing of the hcmdsvrsutil library failed. (RTN = aa...aa, message = bb...bb)
[Action]
The processing of the version acquisition function failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: version acquisition function return code
bb...bb: version acquisition function error message
-
KAPM05990-E
The version file does not exist. (command line = aa...aa)
[Action]
The version file does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: command-line
-
KAPM05991-E
The argument is invalid.
[Action]
The argument is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM05999-E
Fatal error.
[Action]
Fatal error.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06001-I
Updating of the database has started.
[Action]
Updating of the database has started.
-
KAPM06002-I
The database was updated from 01-00 to 01-01.
[Action]
The database was updated from 01-00 to 01-01.
-
KAPM06003-I
The database need not be updated to 01-01.
[Action]
The database does not need to be updated to 01-01.
-
KAPM06004-I
The database updating from 01-01 to 03-00 has started.
[Action]
The database updating from 01-01 to 03-00 has started.
-
KAPM06005-I
The database was updated from 01-01 to 03-00.
[Action]
The database was updated from 01-01 to 03-00.
-
KAPM06006-I
The database need not be updated to 03-00.
[Action]
The database does not need updating to 03-00.
-
KAPM06007-I
The database is already updated.
[Action]
The database is already updated.
-
KAPM06008-E
Updating of the database abnormally ended.
[Action]
Updating of the database has abnormally ended.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06009-I
Updating of the database has ended.
[Action]
Updating of the database has ended.
-
KAPM06010-E
An attempt to backup of the database has failed.
[Action]
An attempt to backup the database has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06011-E
An attempt to restore of the database has failed.
[Action]
An attempt to restore the database has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06012-I
The database does not need to be updated to aa...aa.
[Action]
The database does not need to be updated to aa...aa.
aa...aa: Version
-
KAPM06013-I
The database has been updated from aa...aa to bb...bb.
[Action]
The database has been updated from aa...aa to bb...bb.
aa...aa: Old version
bb...bb: New version
-
KAPM06015-E
An attempt to change the database meta definition has failed.
[Action]
An attempt to change the database meta definition has failed.
Confirm that InterBase is running. If InterBase is running, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06016-E
The version of the database to be upgraded is unknown.
[Action]
The version of the database to be upgraded is unknown.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06017-E
The current database version could not be obtained.
[Action]
The current database version could not be obtained.
Confirm that InterBase is running. If InterBase is running, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06018-E
An attempt to acquire the connection has failed.
[Action]
An attempt to acquire the connection has failed.
Confirm that InterBase is running. If InterBase is running, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06019-E
An attempt to set up the auto-commit function has failed.
[Action]
An attempt to set up the auto-commit function has failed.
Confirm that InterBase is running. If InterBase is running, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06020-E
An attempt to create the lock table has failed.
[Action]
An attempt to create the lock table has failed.
Confirm that InterBase is running. If InterBase is running, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06021-E
An attempt to lock the table has failed.
[Action]
An attempt to lock the table has failed.
Confirm that InterBase is running. If InterBase is running, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06022-E
An attempt to execute SQL has failed.
[Action]
An attempt to execute SQL has failed.
Confirm that InterBase is running. If InterBase is running, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06023-E
An attempt to update the version of the database version table has failed.
[Action]
An attempt to update the version of the database version table has failed.
Confirm that InterBase is running. If InterBase is running, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06024-E
An error occurred during an attempt to read a file.
[Action]
An error occurred during an attempt to read a file.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06025-E
An attempt to acquire the database version has failed.
[Action]
An attempt to acquire the database version has failed.
Confirm that InterBase is running. If InterBase is running, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06026-E
An attempt to upgrade the database has failed.
[Action]
An attempt to upgrade the database has failed.
Confirm that InterBase is running. If InterBase is running, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06027-I
The database was successfully updated.
[Action]
The database was successfully updated.
-
KAPM06028-E
An attempt to set up the environment has failed. (system property name = aa...aa)
[Action]
An attempt to set up the environment has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: System property name
-
KAPM06029-E
Database is not running.
[Action]
The DBMS is not running.
This message might be output because the DBMS was starting immediately after the OS started.
If the message was output at a time other than immediately after the OS started, start the DBMS.
-
KAPM06030-E
Disk capacity is insufficient.
[Action]
Disk capacity is insufficient.
Restore the repository from the backup file, increase the database capacity, and then re-execute.
-
KAPM06031-E
An attempt to upgrade the database has failed.
[Action]
An attempt to upgrade the database has failed.
Restore the repository from a backup file, and then retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06032-E
An attempt to acquire the database version has failed.
[Action]
An attempt to acquire the database version has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06033-E
The current database version is incorrect.
[Action]
The current database version is incorrect.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06034-E
Exclusion control of a TNB_DBVersion table has failed.
[Action]
Exclusion control of a TNB_DBVersion table has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06035-E
The access class of a database could not be found.
[Action]
The access class of a database could not be found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06036-E
Access of a database has failed.
[Action]
An attempt to access a database failed.
This message might be output because the DBMS was starting immediately after the OS started.
If the message was output at a time other than immediately after the OS started, a detailed investigation is required to determine the cause and resolve the problem.
Collect failure information, and then contact the Support Center.
-
KAPM06037-I
The database has been update from version aa...aa to bb...bb.
[Action]
The database has been update from version aa...aa to bb...bb.
aa...aa: version
bb...bb: version
-
KAPM06038-E
An attempt to acquire the user names of users who access the database has failed.
[Action]
An attempt to acquire the user names of users who access the database has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06039-E
The version of the target database is unknown.
[Action]
The version of the target database is unknown.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06040-E
An unexpected error occurred.
[Action]
An unexpected error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06041-E
An attempt to clear an HiRDB environment variable has failed.
[Action]
An attempt to clear an HiRDB environment variable has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06042-W
The SQL will be disregarded. (SQL = aa...aa, error code = bb...bb)
[Action]
This message is displayed when the executed SQL statement is to be disregarded during processing to upgrade the database version.
aa...aa: Executed SQL statement
bb...bb: Error code
-
KAPM06043-E
An attempt to perform a rollback has failed.
[Action]
This message is displayed when an attempt to perform a rollback during processing to upgrade the database version has failed.
Confirm that the DBMS is running, and then retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06044-E
The version upgrade definition file is invalid.
[Action]
The version upgrade definition file is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06045-I
The SQL will now be executed. (SQL = aa...aa)
[Action]
This message is displayed when the SQL statement is to be executed during processing to upgrade the database version.
aa...aa: SQL statement
-
KAPM06046-I
Processing to upgrade the database version started. (version = aa...aa)
[Action]
Processing to upgrade the database version started.
aa...aa: Database version
-
KAPM06047-I
Processing to upgrade the database version ended. (version = aa...aa)
[Action]
Processing to upgrade the database version ended.
aa...aa: Database version
-
KAPM06048-E
An attempt to execute the SQL has failed. (SQL = aa...aa, error code = bb...bb)
[Action]
This message is displayed when an attempt to execute the SQL during processing to upgrade the database version has failed.
Confirm that the DBMS is running, and then retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Executed SQL statement
bb...bb: Error code
-
KAPM06049-E
The RD area of HBase is blocked.
[Action]
The RD area of HBase is blocked.
Remove the cause of the HiRDB blockage, and then try again.
-
KAPM06050-E
An attempt to add a built-in user group failed.
[Action]
An attempt to add a built-in user group failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06052-E
An attempt to change a resource group attribute has failed. (attribute = aa...aa)
[Action]
An attempt to change a resource group attribute has failed.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Attribute
-
KAPM06100-I
The hcmdschgurl command started.
[Action]
The hcmdschgurl command started.
-
KAPM06101-I
The hcmdschgurl command successfully ended.
[Action]
The hcmdschgurl command successfully ended.
-
KAPM06102-E
The hcmdschgurl command abnormally ended.
[Action]
The hcmdschgurl command abnormally ended.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06103-I
An attempt to back up the database has succeeded.
[Action]
An attempt to back up the database has succeeded.
-
KAPM06104-E
An attempt to back up the database has failed.
[Action]
An attempt to back up the database has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06105-I
An attempt to restore the database has succeeded.
[Action]
An attempt to restore the database has succeeded.
-
KAPM06106-E
An attempt to restore the database has failed.
[Action]
An attempt to restore the database has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06111-I
The URL was changed from "aa...aa" to "bb...bb".
[Action]
The URL was changed from "aa...aa" to "bb...bb".
aa...aa: Old URL
bb...bb: New URL
-
KAPM06112-E
The specified URL before the change is invalid. URL = "aa...aa"
[Action]
The specified URL before the change is invalid.
Confirm that the URL is valid.
aa...aa: URL
-
KAPM06113-E
The specified URL after the change is invalid. URL = "aa...aa"
[Action]
The specified URL after the change is invalid.
Confirm that the URL is valid.
aa...aa: URL
-
KAPM06114-E
An attempt to connect to the database has failed.
[Action]
An attempt to connect to the database has failed.
Confirm that the InterBase or the InterClient service is running.
-
KAPM06115-E
An option is invalid.
[Action]
An option is invalid.
Confirm that the option is valid.
-
KAPM06116-E
CIMException occurred. Description = "aa...aa"
[Action]
CIMException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error details
-
KAPM06117-E
An unexpected error occurred. Description = "aa...aa"
[Action]
An unexpected error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error details
-
KAPM06118-E
The BaseURL column does not exist in the class. class name = "aa...aa"
[Action]
The BaseURL column does not exist in the class.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Class name
-
KAPM06119-W
The specified URL does not exist in the class. URL = "aa...aa"
[Action]
The specified URL does not exist in the class.
Confirm that the URL is valid.
aa...aa: URL
-
KAPM06120-I
The URL is not registered.
[Action]
The URL is not registered.
-
KAPM06121-E
IllegalDataException occurred. Description = "aa...aa"
[Action]
IllegalDataException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Details
-
KAPM06122-W
The specified URL before the change and after the change are same.
[Action]
The specified URL before the change and after the change are same.
Confirm that the URL is valid.
-
KAPM06123-W
The program product specified by the type option is invalid.
[Action]
The value specified for the type option is invalid.
Enter a correct value.
-
KAPM06130-I
The hcmdsinitsetup command has started.
[Action]
The hcmdsinitsetup command has started.
-
KAPM06131-I
The hcmdsinitsetup command was successful.
[Action]
The hcmdsinitsetup command was successful.
-
KAPM06132-E
The hcmdsinitsetup command has failed.
[Action]
The hcmdsinitsetup command has failed.
-
KAPM06138-E
A required database path is missing.
[Action]
A required database path is missing.
-
KAPM06139-E
An error occurred during a parameter check.
[Action]
An error occurred during a parameter check.
-
KAPM06140-E
Memory is insufficient.
[Action]
Memory is insufficient.
Check the memory capacity for the operation environment. If necessary, increase the memory.
-
KAPM06141-E
The HiRDB environment already exists.
[Action]
The HiRDB environment already exists.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06142-E
Free disk space is insufficient.
[Action]
Free disk space is insufficient.
Check the disk capacity for the operation environment. If necessary, free some disk area.
-
KAPM06143-E
An error occurred in the system definition entry file.
[Action]
An error occurred in the system definition entry file.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06144-E
The port is already being used.
[Action]
The port is already being used.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06145-E
Other errors.
[Action]
Other errors.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06146-E
An attempt to create the file has failed.
[Action]
An attempt to create the file has failed.
-
KAPM06147-E
An attempt to write to the file has failed.
[Action]
An attempt to write to the file has failed.
-
KAPM06149-E
An attempt to delete the file has failed.
[Action]
An attempt to delete the file has failed.
-
KAPM06153-E
An attempt to execute the command has failed.
[Action]
An attempt to execute the command has failed.
-
KAPM06154-E
An unexpected exception occurred.
[Action]
An unexpected exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06159-E
An attempt to acquire a cluster configuration file has failed.
[Action]
An attempt to acquire a cluster configuration file has failed.
Check the cluster configuration file.
-
KAPM06160-E
The value of hcmds.home cannot be acquired.
[Action]
The value of hcmds.home cannot be acquired.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06161-E
The cluster configuration file was not found.
[Action]
The cluster configuration file was not found.
Check the cluster configuration file.
-
KAPM06162-E
An attempt to acquire the key name has failed.
[Action]
An attempt to acquire the key name has failed.
Check the cluster configuration file.
-
KAPM06163-E
An attempt to acquire a value has failed.
[Action]
An attempt to acquire a value has failed.
Check the cluster configuration file.
-
KAPM06164-E
A CIMClassNotFoundException occurred.
[Action]
A CIMClassNotFoundException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06165-E
An attempt to delete the file has failed. (file = "aa...aa")
[Action]
An attempt to delete the file has failed.
See the next message.
aa...aa: File name
-
KAPM06166-E
An attempt to register the authentication data has failed.
[Action]
An attempt to register the authentication data has failed.
If the hcmdschgurl command is executed, and then this message is displayed after the KAPM06111-I message, registration information was successfully registered in the local repository of the distributed environment, but the registration information on the remote computer was not applied. To apply the registration information on the remote computer, start or restart the single sign-on server for the remote computer. If starting or restarting the server does not resolve the problem, confirm the network connection and settings. Even after that, if the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06169-E
An attempt to log in as an internal user has failed.
[Action]
An attempt to log in as an internal user has failed.
See the next message.
-
KAPM06170-I
The hcmdsdbstatus command has started.
[Action]
The hcmdsdbstatus command has started.
-
KAPM06171-I
The hcmdsdbstatus command has ended.
[Action]
The hcmdsdbstatus command has terminated.
-
KAPM06172-I
The hcmdsdbstatus command was successful.
[Action]
The hcmdsdbstatus command was successful.
-
KAPM06173-E
The hcmdsdbstatus command has failed.
[Action]
The hcmdsdbstatus command has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06176-I
The DBMS is running.
[Action]
The DBMS is running.
-
KAPM06177-I
The DBMS is now starting or shutting down.
[Action]
The DBMS is now starting or shutting down.
-
KAPM06178-I
The DBMS service has stopped.
[Action]
The DBMS stopped.
-
KAPM06179-E
The DBMS restart was interrupted.
[Action]
The restart of the DBMS was interrupted.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06180-E
The DBMS service has stopped or does not exist.
[Action]
The DBMS service has stopped or does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06181-E
The database has not been set up.
[Action]
The database has not been set up.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06182-E
An internal error occurred.
[Action]
An internal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06183-I
Command execution results: "aa...aa"
[Action]
Execution result of command.
aa...aa: Displayed output of the executed command
-
KAPM06184-E
An attempt to execute the command has failed.
[Action]
The execution of the command failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06185-E
An exception occurred.
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06186-E
The value of hcmds.home could not be acquired.
[Action]
The value of hcmds.home cannot be acquired.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06187-E
An attempt to judge the DBMS status has failed.
[Action]
An attempt to judge the DBMS status has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06190-E
An attempt to acquire a parameter failed. (file name = aa...aa, key = bb...bb, value = cc...cc)
[Action]
An attempt to acquire, from the file, the parameter value that corresponds to the key failed.
The file from which the parameter was to be acquired might have been inaccessible when the hcmdsdbsetup command was executed.
Re-execute the hcmdsdbsetup command. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: File path
bb...bb: Key value for setting the value
cc...cc: Value corresponding to the key
-
KAPM06191-E
An attempt to set a parameter failed. (file name = aa...aa, key = bb...bb, value = cc...cc)
[Action]
An attempt to acquire, from the file, the parameter value that corresponds to the key failed.
The file from which the parameter was to be acquired might have been inaccessible when the hcmdsdbsetup command was executed.
Re-execute the hcmdsdbsetup command. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: File path
bb...bb: Key value for setting the value
cc...cc: Value corresponding to the key
-
KAPM06192-I
The command was executed. (command name = aa...aa, return code = bb...bb)
[Action]
The command was executed.
aa...aa: Command name
bb...bb: Return code
-
KAPM06193-I
aa...aa
[Action]
Debug information is output.
aa...aa: Debug information
-
KAPM06203-E
The list of table name is empty.
[Action]
The list of table name is empty.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06206-E
An unexpected error occurred during InterBase processing.
[Action]
An unexpected error occurred during InterBase processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06207-E
The list of table names is empty.
[Action]
The list of table names is empty.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06209-I
A table aa...aa has been created.
[Action]
A table aa...aa has been created.
aa...aa: Table name
-
KAPM06214-E
InterBaseServer is not running.
[Action]
InterBaseServer is not running.
Make sure that InterBaseServer is running.
-
KAPM06215-E
InterServer is not running.
[Action]
InterServer is not running.
Make sure that InterServer is running.
-
KAPM06216-E
An argument contains a null value.
[Action]
An argument contains a null value.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06217-E
The option is invalid.
[Action]
The option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06218-E
The specified directory cannot be created. (directory = aa...aa).
[Action]
The specified directory cannot be created.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Directory name
-
KAPM06219-E
The specified directory name already exists as a file. (file = aa...aa)
aa...aa: File name
[Action]
The specified directory name already exists as a file.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM06220-E
The specified file name already exists as a directory. (directory = aa...aa )
[Action]
The specified file name already exists as a directory.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Directory name
-
KAPM06221-E
The specified database file (aa...aa ) does not exist.
[Action]
The specified database file (aa...aa ) does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Database file name
-
KAPM06222-E
The specified XML file (aa...aa) does not exist.
[Action]
The specified XML file (aa...aa) does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: XML file name
-
KAPM06223-E
The specified value is invalid. (value = aa...aa)
[Action]
The specified value is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Value
-
KAPM06224-E
The specified arguments are insufficient.
[Action]
The specified arguments are insufficient.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06226-E
The specified file (aa...aa) does not exist in the argument of the pdload command.
[Action]
The specified file (aa...aa) does not exist in the argument of the pdload command.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Name of non-existent file
-
KAPM06227-I
The processing on table aa...aa finished successfully.
[Action]
The processing on table aa...aa finished successfully.
aa...aa: Table name
-
KAPM06228-E
The CSV file (aa...aa) contains an invalid line.
[Action]
The CSV file (aa...aa) contains an invalid line.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM06229-E
An attempt to read the data from table aa...aa has failed.
[Action]
An attempt to read the data from table aa...aa has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Table name
-
KAPM06230-E
An unexpected return value (aa...aa) was returned from the pdload command.
[Action]
An unexpected return value (aa...aa) was returned from the pdload command.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Unexpected return value
-
KAPM06231-E
An attempt to upgrade InterBase has failed.
[Action]
An attempt to upgrade InterBase has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06232-E
An SQL exception occurred.
[Action]
An SQL exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06234-E
A table name in XML is null or 0 bytes.
[Action]
A table name in XML is null or 0 bytes.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06235-E
An unexpected XML tag (aa...aa) has been detected.
[Action]
An unexpected XML tag (aa...aa) has been detected.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Unexpected XML tag
-
KAPM06239-E
An error occurred during SAX processing.
[Action]
An error occurred during SAX processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06241-E
A fatal error occurred during SAX processing.
[Action]
A fatal error occurred during SAX processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06242-E
An unexpected data length (aa...aa) was detected.
[Action]
An unexpected data length (aa...aa) was detected.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Unexpected value
-
KAPM06243-E
A SAXException occurred. (details = aa...aa)
[Action]
A SAXException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: SAXException detailed information
-
KAPM06244-E
The length of the data to be moved to HiRDB exceeds the HiRDB limit. (data type of excessively long data, length) = (aa...aa, bb...bb)
[Action]
The length of the data to be moved to HiRDB exceeds the HiRDB limit.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Data type of the excessively long data
bb...bb: Length of the excessively long data
-
KAPM06245-E
HiRDB has not started.
[Action]
HiRDB has not started.
Please start HiRDB.
-
KAPM06246-I
The table aa...aa was successfully created.
[Action]
Table aa...aa was successfully created.
aa...aa: Table name
-
KAPM06247-E
The table aa...aa was not created.
[Action]
Table aa...aa was not created.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Table name
-
KAPM06248-I
Processing ended normally.
[Action]
Processing ended normally.
-
KAPM06249-E
An unexpected exception occurred.
[Action]
An unexpected exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06250-I
The data was registered successfully in table aa...aa.
[Action]
The data was registered successfully in table aa...aa.
aa...aa: Table name
-
KAPM06251-E
The data was not registered in table aa...aa.
[Action]
The data was not registered in table aa...aa.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Table name
-
KAPM06252-E
Authentication has failed at aa...aa.
[Action]
Authentication has failed at aa...aa.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Database name
-
KAPM06253-E
Application aa...aa is not supported.
[Action]
Databases of application aa...aa are not supported.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Application name
-
KAPM06255-I
Processing to initialize database conversion is being performed.
[Action]
Processing to initialize database conversion is being performed.
-
KAPM06256-E
The specified file could not be created. (file = aa...aa)
[Action]
The specified file could not be created.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM06257-I
Data is now being read from the old database. (progress = aa...aa/bb...bb)
[Action]
The database is now being converted.
aa...aa: Number of converted tables
bb...bb: Total number of tables to be converted
-
KAPM06258-I
The database is now being converted. (progress = aa...aa/bb...bb)
[Action]
The database is now being converted.
aa...aa: Number of converted tables
bb...bb: Total number of tables to be converted
-
KAPM06259-E
The file aa...aa does not exist.
[Action]
The file aa...aa does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM06262-I
The hcmdssslsetup command has started.
[Action]
This message is output when the hcmdssslsetup command starts.
-
KAPM06263-I
The hcmdssslsetup command has ended.
[Action]
This message is output when the hcmdssslsetup command ends.
-
KAPM06264-I
The hcmdssslsetup command ended successfully.
[Action]
This message is output when the hcmdssslsetup command ends successfully.
-
KAPM06266-E
An option is invalid.
[Action]
This message is output when an option specified for a command is invalid.
Specify valid options.
-
KAPM06267-E
The sslc.cnf file was not found.
[Action]
This message is output when the sslc.cnf file does not exist at the storage location.
If the file option is specified, confirm that the path specified as an argument is in the sslc.cnf file.
If the file option is not specified, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06268-E
The sslc.cnf file is invalid.
[Action]
This message is output when the format of the sslc.cnf file is invalid.
Confirm the permissions for the sslc.cnf file or the permissions of the user who executed the command, and then re-execute the command.
Even after that, if the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06269-E
Execution of the sslc command failed.
[Action]
This message is output when execution of the sslc command fails.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06270-I
Processing to create a private key has started.
[Action]
This message is output when processing to create a private key starts.
-
KAPM06271-I
Processing to create a private key has ended.
[Action]
This message is output when processing to create a private key ends.
-
KAPM06272-E
Processing to create a private key failed.
[Action]
This message is output when processing to create a private key fails.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06273-I
Processing to create a self-signed certificate has started.
[Action]
This message is output when processing to create a self-signed certificate starts.
-
KAPM06274-I
Processing to create a self-signed certificate has ended.
[Action]
This message is output when processing to create a self-signed certificate ends.
-
KAPM06275-E
Processing to create a self-signed certificate failed.
[Action]
This message is output when processing to create a self-signed certificate fails.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06276-I
Processing to create a self-signed certificate in DER format has started.
[Action]
This message is output when processing to create a self-signed certificate in DER format starts.
-
KAPM06277-I
Processing to create a self-signed certificate in DER format has ended.
[Action]
This message is output when processing to create a self-signed certificate in DER format ends.
-
KAPM06278-E
Processing to create a self-signed certificate in DER format failed.
[Action]
This message is output when processing to create a self-signed certificate in DER format fails.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06280-E
An internal error occurred.
[Action]
This message is output when an internal error occurs.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06281-I
Processing to create a certificate content file started.
[Action]
Processing to create a certificate content file started.
-
KAPM06282-I
Processing to create a certificate content file ended.
[Action]
Processing to create a certificate content file ended.
-
KAPM06283-E
Processing to create a certificate content file has failed.
[Action]
Processing to create a certificate content file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06284-E
The sslc command was not found.
[Action]
The sslc command was not found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06285-E
File deletion has failed.
[Action]
Deletion of a private key, self-signed certificate, DER format self-signed certificate, or certificate content file created by the hcmdssslsetup command has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06286-E
The private key was not found.
[Action]
The private key was not found in the storage destination after it was created.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06287-E
The self-signed certificate was not found.
[Action]
The self-signed certificate was not found in the storage destination after it was created.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06288-E
The DER format self-signed certificate was not found.
[Action]
The DER format self-signed certificate was not found in the storage destination after it was created.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06289-E
The certificate contents file was not found.
[Action]
After the certificate contents file had been created, it was not found in the storage destination.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06290-E
An exception occurred.
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06303-E
The option(s) specified is insufficient.
[Action]
The option(s) specified is insufficient.
Specify all the necessary options.
-
KAPM06304-E
The option value specified is invalid.
[Action]
The option value specified is invalid.
Specify the option and specify the necessary proceeding values. (user name and password, etc.)
-
KAPM06305-E
The option "aa...aa" is not supported.
[Action]
The option "aa...aa" is not supported.
Do not specify an unsupported option.
aa...aa: Option name
-
KAPM06306-E
The option "aa...aa" appears 2 times or more.
[Action]
The option "aa...aa" appears 2 times or more.
Check the specification of the option.
aa...aa: Option name
-
KAPM06307-E
The combination of options is invalid.
[Action]
The combination of options is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06308-E
An argument contains a null value.
[Action]
An argument contains a null value.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06309-E
An exception occurred.
[Action]
An exception occurred. See the following message KAPM49001-E for details.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06310-E
The file "aa...aa" could not be read.
[Action]
The file "aa...aa" could not be read.
Confirm that the file exists, that the file is not in use, and that the make directory of the file is correct.
aa...aa: File name
-
KAPM06311-E
The input file contains a grammar mistake.
[Action]
The input file contains a grammar mistake.
Correct the syntax error in the specified definition file.
-
KAPM06312-E
An error occurred when inputting the file.
[Action]
An error occurred when inputting the file.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06313-E
The specified value is invalid. value = aa...aa
[Action]
The specified value is invalid.
Confirm the value in the user definition application file.
aa...aa: Value
-
KAPM06317-E
I/O of XML has failed.
[Action]
I/O of XML has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06318-E
An error occurred in the SAX parser.
[Action]
An error occurred in the SAX parser.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06319-I
Processing ended normally.
[Action]
Processing ended normally.
-
KAPM06321-E
The "bb...bb" file to be used by "aa...aa" does not exist.
[Action]
The bb...bb file to be used by aa...aa does not exist.
Check whether the file is in the specified location.
aa...aa: Command name, class name, etc.
bb...bb: Name of the file that does not exist
-
KAPM06322-E
An SQL exception occurred.
[Action]
An SQL exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06323-I
Execution of the "aa...aa" command ended normally.
[Action]
Execution of the aa...aa command ended normally.
aa...aa: Command name
-
KAPM06324-E
An attempt to execute the "aa...aa" command has failed.
[Action]
An attempt to execute the aa...aa command has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
-
KAPM06325-I
HiRDB was started.
[Action]
HiRDB was started.
-
KAPM06326-E
HiRDB was not started.
[Action]
HiRDB was not started.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06327-I
HiRDB was stopped.
[Action]
HiRDB was stopped.
-
KAPM06328-E
HiRDB was not stopped.
[Action]
HiRDB was not stopped.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06330-I
aa...aa processing started.
[Action]
aa...aa processing started.
aa...aa: Method name
-
KAPM06331-I
aa...aa processing finished.
[Action]
aa...aa processing finished.
aa...aa: Method name
-
KAPM06332-E
The database of the specified product has not been set up.
[Action]
The database of the specified product has not been set up.
Use the hcmdsdbsetup command to set up the database of the specified product.
-
KAPM06333-E
HiRDB cannot be stopped because a Suite product is connected to HiRDB.
[Action]
HiRDB cannot be stopped because a Suite product is connected to HiRDB.
Stop the Suite product that is connected to HiRDB, and then try again.
-
KAPM06334-E
InterBase is not running.
[Action]
InterBase is not running.
Check whether InterBaseServer is running. For details, check hcmdsdbconvert[n].log.
-
KAPM06335-E
The DBMS has not started.
[Action]
The DBMS has not started.
Check whether DBMS is running. For details, check hcmdsdbconvert[n].log.
-
KAPM06336-E
Authentication has failed at InterBase.
[Action]
Authentication has failed at InterBase.
Specify the correct user ID and password. For details, check hcmdsdbconvert[n].log.
-
KAPM06337-E
Authentication has failed in the DBMS.
[Action]
Authentication has failed in the DBMS.
Specify the correct user ID and password. For details, check hcmdsdbconvert[n].log.
-
KAPM06338-E
An unexpected exception occurred.
[Action]
An unexpected exception occurred.
Check hcmdsdbconvert[n].log.
-
KAPM06339-E
An unexpected exception occurred.
[Action]
An unexpected exception occurred.
Check hcmdsdbconvert[n].log.
-
KAPM06340-E
Memory is insufficient.
[Action]
Memory is insufficient.
Check hcmdsdbinitsetup[n].log.
-
KAPM06341-E
The DBMS environment already exists.
[Action]
The DBMS environment already exists.
Check hcmdsdbinitsetup[n].log.
-
KAPM06342-E
Free disk space is insufficient.
[Action]
Free disk space is insufficient.
Check the operating environment for the disk capacity. If necessary, free up some disk space. For details, check hcmdsdbinitsetup[n].log.
-
KAPM06343-E
An error occurred in the system definition entry file.
[Action]
An error occurred in the system definition entry file.
Check hcmdsdbinitsetup[n].log.
-
KAPM06344-E
The port is already being used.
[Action]
The port is already being used.
Check hcmdsdbinitsetup[n].log.
-
KAPM06345-E
An unexpected exception occurred.
[Action]
An unexpected exception occurred.
Check hcmdsdbinitsetup[n].log.
-
KAPM06346-E
The file "aa...aa" already exists.
[Action]
The file aa...aa already exists.
If the target file is hcmdsdbsetRDArea.ini, a database might already exist at the specified database creation destination. If such a database exists, change the database creation destination, and then perform setup again. If such a database does not exist, delete the file indicated by aa...aa, and then perform setup again.
aa...aa: File name
-
KAPM06347-W
The specified file system area "aa...aa" already existed, so it was deleted.
[Action]
The specified file system area aa...aa already existed, so it was deleted.
aa...aa: File system area
-
KAPM06348-I
The database was created successfully.
[Action]
The database was created successfully.
-
KAPM06349-E
An attempt to create the database has failed.
[Action]
An attempt to create the database has failed.
-
KAPM06350-I
The database was deleted successfully.
[Action]
The database was deleted successfully.
-
KAPM06351-E
An attempt to delete the database has failed.
[Action]
An attempt to delete the database has failed.
-
KAPM06352-E
Directory creation has failed. (directory = aa...aa)
[Action]
Directory creation has failed.
Revise the creation destination of the database. If necessary, change the creation destination of the database, and then perform the setup again.
If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: directory name
-
KAPM06353-I
Set up the database again.
[Action]
Set up the database again.
-
KAPM06354-E
There are no parameter definition files in the specified directory. Specify a directory that contains a parameter definition file.
[Action]
No parameter definition files (files that can be used to set up a database) are in the directory specified for the prmfile option of the hcmdsdbsetup command.
Specify a directory that contains a parameter definition file for the prmfile option, and then re-execute the command.
-
KAPM06355-W
Database unsetup processing failed. (product name = aa...aa)
[Action]
This message is output when unsetup fails for the product specified in the type option of the hcmdsdbsetup command.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Product name
-
KAPM06356-W
A database has not been set up for the specified product. (product name = aa...aa)
[Action]
This message is output when a database is not set up for the product specified in the type option of the hcmdsdbsetup command.
aa...aa: Product name
-
KAPM06357-I
The database was successfully unsetup. (product name = "aa...aa")
[Action]
The specified product database was unsetup.
aa...aa: Product name
-
KAPM06358-I
The initial unsetup processing succeeded.
[Action]
The initial unsetup processing was successful.
-
KAPM06359-W
The initial unsetup processing failed.
[Action]
The initial unsetup processing failed.
-
KAPM06360-W
Deletion of the RD area failed. (RD area file = aa...aa)
[Action]
Deletion of the RD area failed.
If another database exists at the database creation destination, delete it.
aa...aa: RD area file name
-
KAPM06361-I
The method was executed. (method name = aa...aa, return code = bb...bb)
[Action]
The method was executed.
aa...aa: Method name
bb...bb: Return code
-
KAPM06362-E
Acquisition of the name of a set up product failed.
[Action]
Acquisition of the name of a set up product failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06363-I
The service is stopped.
[Action]
The service is stopped.
-
KAPM06364-I
The service is running.
[Action]
The service is running.
-
KAPM06365-I
The service is starting.
[Action]
The service is starting.
-
KAPM06366-I
The service is stopping.
[Action]
The service is stopping.
-
KAPM06367-I
The service is now being resumed.
[Action]
The service is now being resumed.
-
KAPM06368-I
The service is now being paused.
[Action]
The service is now being paused.
-
KAPM06369-I
The service is paused.
[Action]
The service is paused.
-
KAPM06370-I
The service does not exist.
[Action]
The service does not exist.
-
KAPM06371-W
The service is disabled.
[Action]
The service is disabled.
-
KAPM06372-W
Acquisition of the service status failed.
[Action]
Acquisition of the service status failed.
-
KAPM06373-W
The service status is currently unknown.
[Action]
The service status is currently unknown.
-
KAPM06374-I
Execution of the "aa...aa" command ended successfully. (return code = bb...bb)
[Action]
Execution of the "aa...aa" command ended successfully.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
bb...bb: Return code
-
KAPM06375-E
Execution of the "aa...aa" command failed. (return code = bb...bb)
[Action]
Execution of the "aa...aa" command failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
bb...bb: Return code
-
KAPM06396-E
"aa...aa":"bb...bb"
[Action]
Message for debugging:
aa...aa: command name
bb...bb: message
-
KAPM06398-E
"aa...aa"
[Action]
Message for debugging.
aa...aa: Message
-
KAPM06399-E
An unexpected exception occurred.
[Action]
An unexpected exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06403-E
An exception occurred.
[Action]
An exception occurred. See the following message KAPM49001-E for details.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06404-E
The file "aa...aa" could not be read.
[Action]
The file "aa...aa" could not be read.
Confirm that the file exists, that the file is not in use, and that the make directory of the file is correct.
aa...aa: File name
-
KAPM06405-I
Processing ended normally.
[Action]
Processing ended normally.
-
KAPM06407-E
The "bb...bb" file to be used by "aa...aa" does not exist.
[Action]
The bb...bb file to be used by aa...aa does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name, class name, etc.
bb...bb: Name of the file that does not exist
-
KAPM06408-I
Execution of the "aa...aa" command ended normally.
[Action]
Execution of the aa...aa command ended normally.
aa...aa: Command name
-
KAPM06409-E
An attempt to execute the "aa...aa" command has failed.
[Action]
An attempt to execute the aa...aa command has failed.
aa...aa: Command name
-
KAPM06410-I
The setup status is "not set up".
[Action]
The setup status is "not set up".
-
KAPM06411-I
The setup status is "stand-alone".
[Action]
The setup status is "stand-alone".
-
KAPM06412-I
The setup status is "active system".
[Action]
The setup status is "active system".
-
KAPM06413-I
The setup status is "standby system".
[Action]
The setup status is "standby system".
-
KAPM06414-E
The option specification is incorrect.
[Action]
The option specification is incorrect.
Review and, if necessary, revise the option specification.
-
KAPM06429-E
An unexpected exception occurred.
[Action]
An unexpected exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06433-E
An exception occurred.
[Action]
An exception occurred. See the following message KAPM49001-E for details.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06434-I
Processing ended normally.
[Action]
Processing ended normally.
-
KAPM06436-E
An attempt to execute the "aa...aa" command has failed.
[Action]
An attempt to execute the aa...aa command has failed.
aa...aa: Command name
-
KAPM06437-E
The option(s) specified is insufficient.
[Action]
The option(s) specified is insufficient.
Please review the specification of the option.
-
KAPM06438-I
The HiRDB service has started.
[Action]
The HiRDB service has started.
-
KAPM06439-I
The HiRDB service has stopped.
[Action]
The HiRDB service has stopped.
-
KAPM06440-I
The HiRDB service has already started.
[Action]
The HiRDB service has already started.
-
KAPM06441-I
The HiRDB service has already stopped.
[Action]
It is already stopped by HiRDB service.
-
KAPM06442-E
The HiRDB service has not been set up.
[Action]
The HiRDB service has not been set up.
For products that use the DBMS:
Confirm that the product is properly installed, and then take action as necessary. Even after taking action, if the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
For products that do not use the DBMS (JP1/PFM-MWO):
There is no effect on the behavior of these products.
-
KAPM06443-E
An attempt to start the HiRDB service has failed.
[Action]
An attempt to start the HiRDB service has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06444-E
An attempt to stop the HiRDB service has failed.
[Action]
An attempt to stop the HiRDB service has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06445-E
HiRDB cannot be stopped because a Suite product is connected to HiRDB.
[Action]
HiRDB cannot be stopped because a Suite product is connected to HiRDB.
HiRDB cannot be stopped because a Hitachi Command Suite product is connected to it.
Stop the Hitachi Command Suite product connected to HiRDB, and then retry the operation.
Even after retrying the operation, if the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06459-E
An unexpected exception occurred.
[Action]
An unexpected exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06470-I
The hcmdsdbconnectcheck command will now start.
[Action]
The hcmdsdbconnectcheck command started.
-
KAPM06471-I
Now checking the HiRDB connection... (number of executions = aa...aa, specified number of executions = bb...bb)
[Action]
Now checking the HiRDB connection... (number of executions = aa...aa, specified number of executions = bb...bb)
aa...aa: Number of executions
bb...bb: Specified number of executions
-
KAPM06472-I
HiRDB can be connected to.
[Action]
HiRDB can be connected to.
-
KAPM06473-I
The hcmdsdbconnectcheck command will now end.
[Action]
The hcmdsdbconnectcheck command will now end.
-
KAPM06474-E
A connection with HiRDB could not be confirmed.
[Action]
A connection with HiRDB could not be confirmed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06475-E
The hcmdsdbconnectcheck command could not be executed successfully.
[Action]
The hcmdsdbconnectcheck command could not be executed successfully.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06476-E
An option is invalid.
[Action]
An option is invalid.
-
KAPM06477-E
The value of hcmds.home could not be acquired.
[Action]
The value of hcmds.home could not be acquired.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06501-I
The method has started.
[Action]
The method has started.
-
KAPM06502-I
The method has finished.
[Action]
The method has finished.
-
KAPM06503-E
The option is invalid.
[Action]
The option is invalid.
Specify the option correctly.
-
KAPM06504-E
A specified option is insufficient.
[Action]
A specified option is insufficient.
Specify the option correctly.
-
KAPM06505-E
The value specified in the option is invalid. (option = aa...aa)
[Action]
The value specified in the option is invalid.
Check the specified value of the option.
aa...aa: Option name
-
KAPM06506-E
The specified directory cannot be created. (directory = aa...aa)
[Action]
The specified directory cannot be created.
Make sure that you have write permission for the directory.
aa...aa: Directory
-
KAPM06507-E
The specified directory already exists as a file. (file = aa...aa)
[Action]
The specified directory already exists as a file.
Specify another directory name.
aa...aa: File name
-
KAPM06508-E
The specified value is invalid. (value = aa...aa)
[Action]
The specified value is invalid.
Specify a valid value.
aa...aa: Specified value
-
KAPM06509-E
The file aa...aa does not exist.
[Action]
The file aa...aa does not exist.
Confirm that there are no errors in the file specification. If there are no errors, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM06510-E
The directory aa...aa does not exist.
[Action]
The directory aa...aa does not exist.
Confirm that there are no errors in the directory specification. If there are no errors, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Directory name
-
KAPM06511-E
The file aa...aa already exists.
[Action]
The file aa...aa already exists.
Delete the file, or move to another directory.
aa...aa: File name
-
KAPM06512-E
The directory aa...aa already exists.
[Action]
The directory aa...aa already exists.
Specify another directory.
aa...aa: Directory name
-
KAPM06513-E
Command aa...aa returned the value bb...bb. The error message is cc...cc.
[Action]
Command aa...aa returned the value bb...bb. The error message is cc...cc.
Confirm that the value specified for the option is correct. If the value is correct, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
bb...bb: Return code
cc...cc: Error message
-
KAPM06514-I
Processing ended normally.
[Action]
Processing ended normally.
-
KAPM06515-E
An IOException occurred. (details = aa...aa)
[Action]
An IOException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception details
-
KAPM06516-E
An exception occurred. (details = aa...aa)
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception details
-
KAPM06517-E
A NullPointerException occurred. (details = aa...aa)
[Action]
A NullPointerException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Exception details
-
KAPM06518-E
HiRDB has not been installed.
[Action]
HiRDB has not been installed.
Make sure that HiRDB is installed. When a product of HiCommand 4.0 or later is installed, HiRDB is automatically installed.
-
KAPM06519-E
An error occurred while executing the hcmdsdbmode command.
[Action]
An error occurred while executing the hcmdsdbmode command.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06520-E
HiRDB has not started.
[Action]
HiRDB has not started.
Start HiRDB.
-
KAPM06521-E
The RD area for aa...aa has not been set up.
[Action]
The RD area for aa...aa has not been set up.
In the type option, specify the installed product name.
aa...aa: Product name
-
KAPM06522-E
There is no RD area in the system.
[Action]
There is no RD area in the system.
Make sure that the HiCommand product has been installed.
-
KAPM06523-I
The hcmdsdbmove command has started.
[Action]
The hcmdsdbmove command has started.
-
KAPM06524-I
Initialization for moving the database is being performed.
[Action]
Initialization for moving the database is being performed.
-
KAPM06525-I
The data for aa...aa will now be moved.
[Action]
The data for aa...aa will now be moved.
aa...aa: Product name
-
KAPM06526-I
Processing to import data has started.
[Action]
Processing to import data has started.
-
KAPM06527-I
The table definitions of the database are being imported.
[Action]
The table definitions of the database are being imported.
-
KAPM06528-I
The data is being imported.
[Action]
The data is being imported.
-
KAPM06529-I
The database procedures are being imported.
[Action]
The database procedures are being imported.
-
KAPM06530-I
Processing to import data has ended.
[Action]
Processing to import data has ended.
-
KAPM06531-I
Processing to export data has started.
[Action]
Processing to export data has started.
-
KAPM06532-I
The table definitions of the database are being exported.
[Action]
The table definitions of the database are being exported.
-
KAPM06533-I
The data is being exported.
[Action]
The data is being exported.
-
KAPM06534-I
The database procedures are being exported.
[Action]
The database procedures are being exported.
-
KAPM06535-I
Processing to export data has ended.
[Action]
Processing to export data has ended.
-
KAPM06536-I
The data is being imported. (progress = aa...aa/bb...bb)
[Action]
The data is being imported.
aa...aa: Amount of imported data
bb...bb: Total amount of data to be imported
-
KAPM06537-I
The data is being exported. (progress = aa...aa/bb...bb)
[Action]
The data is being exported.
aa...aa: Amount of exported data
bb...bb: Total amount of data to be exported
-
KAPM06540-I
The view is being imported.
[Action]
The view is being imported.
-
KAPM06541-I
The view is being exported.
[Action]
The view is being exported.
-
KAPM06542-E
The data to be imported to aa...aa is not in the directory in the datapath option.
[Action]
When the import option was specified in the hcmdsdbmove command, the data to be imported from the product displayed in the message was not in the directory specified by the datapath option.
Please check that the data to be imported exists in the directory specified by the datapath option.
Also, if import data of multiple products exists in different directories, specify the type option, and then import the data for each product one product at a time.
aa...aa: The product for which the data to be imported cannot be found.
-
KAPM06543-I
The database was exported successfully.
[Action]
The database was exported successfully.
-
KAPM06544-E
An attempt to export the database has failed.
[Action]
An attempt to export the database has failed.
Re-execute the command. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06545-I
The database was imported successfully.
[Action]
The database was imported successfully.
-
KAPM06546-E
An attempt to import the database has failed.
[Action]
An attempt to import the database has failed.
Re-execute the command. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06548-E
An attempt to delete a table definition from the database failed.
[Action]
An attempt to delete a table definition from the database failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06549-E
An attempt to defragment the database failed.
[Action]
An attempt to defragment the database failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06570-E
An option is invalid.
[Action]
This message is displayed when the format of the specified option is invalid.
Specify a valid option, and then try again.
-
KAPM06571-E
The specified options are insufficient.
[Action]
This message is displayed when a required option is not specified or an unnecessary option is specified.
Specify a valid option, and then try again.
-
KAPM06572-E
The specified option value is invalid.
[Action]
This message is displayed when the specified value of the option is invalid.
Specify a valid option value, and then try again.
-
KAPM06573-E
The specified directory name already exists as a file name. (file name = aa...aa)
[Action]
This message is displayed when the directory name specified in the command option already exists as a file.
Specify a valid option value, and then try again.
aa...aa: File name
-
KAPM06574-E
The directory name exceeds aa...aa characters.
[Action]
This message is displayed when the length (number of characters) of the directory name specified in the option exceeds the maximum.
Specify a valid option value, and then try again.
aa...aa: Length of directory name (number of characters)
-
KAPM06575-E
The same value cannot be specified for the databasepath and exportpath parameters.
[Action]
This message is displayed when the character strings specified for the databasepath and exportpath parameters are the same.
Specify a different directory name, and then try again.
-
KAPM06576-E
An attempt to acquire the key name has failed.
[Action]
This message is displayed when a required property has not been set in the cluster settings file.
Make sure the contents of the cluster settings file are correct.
-
KAPM06577-E
An attempt to acquire a value has failed.
[Action]
This message is displayed when a value has not been set correctly in the cluster settings file.
Make sure the values in the cluster settings file are correct.
-
KAPM06578-E
The cluster settings file was not found.
[Action]
This message is displayed when there is no cluster settings file in the conf directory.
Make sure that cluster.conf is in the conf directory.
-
KAPM06579-E
The value of hcmds.home cannot be acquired.
[Action]
This message is displayed when hcmds.home has not been set in the system properties.
Make sure that hcmds.home has been set in the system properties.
-
KAPM06580-E
An attempt to clear a DBMS environment variable has failed.
[Action]
This message is displayed when an attempt to delete the DBMS client environment variable has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06581-E
The DBMS has not stopped.
[Action]
This message is displayed when the DBMS did not stop when the command was executed.
Before executing a command, stop the DBMS service.
-
KAPM06582-E
An attempt to load the file has failed. (file = aa...aa)
[Action]
This message is displayed when an attempt to load the file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM06583-E
An attempt to write to the file has failed. (file = aa...aa)
[Action]
This message is displayed when an attempt to write to the file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM06584-I
Processing to export data was successful.
[Action]
This message is displayed when data was exported successfully.
-
KAPM06585-I
Re-creation of the database was successful.
[Action]
This message is displayed when the database was re-created successfully.
-
KAPM06586-I
Processing to import data was successful.
[Action]
This message is displayed when data was imported successfully.
-
KAPM06587-E
An attempt to export data has failed.
[Action]
This message is displayed when an attempt to export data has failed.
Remove the cause of the failure, and then try again. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06588-E
An attempt to re-create the database has failed.
[Action]
This message is displayed when an attempt to re-create the database has failed.
Remove the cause of the failure, and then try again. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06589-E
An attempt to import data has failed.
[Action]
This message is displayed when an attempt to import data has failed.
Remove the cause of the failure, and then try again. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06590-I
Processing ended normally.
[Action]
This message is displayed when command execution ended normally.
-
KAPM06591-E
The data to be imported was not found in the specified directory.
[Action]
This message is displayed when the data to be imported could not be found in the specified directory.
Specify the directory to which the data was exported, and then re-execute the command. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06592-E
The data to be imported to aa...aa is not in the directory specified in the exportpath option.
[Action]
The data to be imported of the product displayed in the message is not in the directory specified for the exportpath option.
Please confirm to exist an import data in the directory specified by the exportpath option.
aa...aa: The product that the import data could not be found.
-
KAPM06600-I
Entered parameter: aa...aa
[Action]
Entered parameter.
aa...aa: Parameter entered by the user
-
KAPM06601-I
User ID = aa...aa, application = bb...bb, permissions = cc...cc
[Action]
User ID = aa...aa, application = bb...bb, permissions = cc...cc
aa...aa: User ID of the target user
bb...bb: Target application
cc...cc: Permission set by the target user
-
KAPM06602-E
A specified parameter is invalid.
[Action]
A specified parameter is invalid.
Check the specified parameter.
-
KAPM06603-E
An attempt to read the file has failed. (file = aa...aa)
[Action]
An attempt to read the file has failed.
Make sure the file exists on the specified path aa...aa.
aa...aa: Absolute path of the file
-
KAPM06604-E
The database has not started.
[Action]
The database has not started.
Make sure the database has started.
-
KAPM06605-E
An attempt to communicate with the server or database has failed.
[Action]
An attempt to communicate with the server or database has failed.
Make sure the following have started: the HBase Storage Mgmt Common Service or HBase Storage Mgmt Web Service, and the database.
-
KAPM06606-E
An error has occurred.
[Action]
An error has occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06609-I
The command ended normally.
[Action]
The command ended normally.
-
KAPM06610-E
An option specification is invalid.
[Action]
An option specification is invalid.
Specify a valid option as shown in the message, and then execute the command.
-
KAPM06611-E
An attempt to load the hsso.conf file has failed.
[Action]
An attempt to load the hsso.conf file has failed.
Make sure the host name in hsso.conf is correct.
-
KAPM06612-E
Authentication has failed.
[Action]
Authentication has failed.
Make sure that the user name and password are correct.
If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06613-W
Authentication data was not found in the repository.
[Action]
Authentication data was not found in the repository.
-
KAPM06614-E
An attempt to communicate with SSO Server has failed.
[Action]
An attempt to communicate with SSO Server has failed.
Perform one of the following procedures:
1. For a distributed environment:
If you executed the command from the primary side, make sure that the single sign-on server on the primary side is running.
If you executed the command from the secondary side, make sure that the single sign-on server on the primary side is running. If the single sign-on server on the primary side is not running, start it, and then restart the single sign-on server on the secondary side. If the single sign-on server on the primary side is running, make sure that the single sign-on server on the secondary side is running.
2. For a non-distributed environment:
Make sure that the single sign-on server is running.
3. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06640-E
A fatal error occurred during processing.
[Action]
A fatal error occurred during processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06641-E
An internal error occurred.
[Action]
An internal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06642-E
An error occurred during file input.
[Action]
An error occurred during file input.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06643-E
An attempt to acquire file information has failed.
[Action]
An attempt to acquire file information has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06644-E
An option is invalid. Code=[aa...aa], Data=[bb...bb]
[Action]
An option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: code indicating the error location
bb...bb: problematic option and its value
-
KAPM06645-I
hcmdsdbpath [aa...aa]{,[bb...bb],......[.....]}
[Action]
The options specified for the command are displayed.
aa...aa: command line argument
bb...bb: command line argument
-
KAPM06654-E
The specified backup directory is invalid. Path=[aa...aa], Code=[bb...bb]
[Action]
The backup directory specified for the backupsdir option is invalid.
For the backupsdir option, specify the directory specified for the output destination of the hcmdsbackups command.
aa...aa: path to the backup directory
bb...bb: code indicating the error location
-
KAPM06659-E
aa...aa
[Action]
Detailed information for KAPMxxxxx-E. This indicates the thrown exception object and the backtrace for that object.
See the message KAPMxxxxx-E.
aa...aa: Name of the exception object and the reason that object was thrown, or the backtrace for that object
-
KAPM06665-I
The DBMS has started.
[Action]
The DBMS has started.
-
KAPM06666-I
The DBMS has stopped.
[Action]
The DBMS has stopped.
-
KAPM06667-I
aa...aa processing has started.
[Action]
Processing has started.
aa...aa: Processing name
-
KAPM06668-I
aa...aa processing has finished.
[Action]
Processing has finished.
aa...aa: Processing name
-
KAPM06669-E
An argument contains a null value.
[Action]
An argument contains a null value.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06670-E
An exception occurred.
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06671-E
The specified value is invalid. (value = aa...aa)
[Action]
The specified value is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Value
-
KAPM06672-E
Execution of the command aa...aa has failed.
[Action]
Execution of the command has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
-
KAPM06673-E
The DBMS did not start.
[Action]
The DBMS did not start.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06674-E
The DBMS did not stop.
[Action]
The DBMS did not stop.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06675-I
The DBMS has not been set up
[Action]
The DBMS has not been set up
-
KAPM06676-I
The database of the specified product has not been set up.
[Action]
The database of the specified product has not been set up.
-
KAPM06679-E
The value of hcmds.home cannot be acquired.
[Action]
The value of hcmds.home cannot be acquired.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06683-E
"aa...aa":"bb...bb"
[Action]
Message for debugging:
aa...aa: command name
bb...bb: message
-
KAPM06689-E
Processing has terminated abnormally. (processing name = aa...aa)
[Action]
Processing has terminated abnormally. (processing name = aa...aa)
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Processing name
-
KAPM06690-E
The file hcmdsdbsetRDArea.ini does not exist.
[Action]
The file hcmdsdbsetRDArea.ini does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06691-E
An error occurred during file I/O processing.
[Action]
An error occurred during file I/O processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06692-W
Execution of the command aa...aa has failed.
[Action]
Execution of the command has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
-
KAPM06700-I
The hcmdsscmquery command started.
[Action]
The hcmdsscmquery command started.
-
KAPM06701-I
The hcmdsscmquery command ended successfully.
[Action]
The hcmdsscmquery command ended successfully.
-
KAPM06702-E
The hcmdsscmquery command failed.
[Action]
The hcmdsscmquery command failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06703-I
The aa...aa function started.
[Action]
The function started.
aa...aa: Function name
-
KAPM06704-I
The aa...aa function ended.
[Action]
The function ended.
aa...aa: Function name
-
KAPM06705-E
Acquisition of the installation path failed.
[Action]
Acquisition of the installation path failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06706-E
One or more options are invalid.
[Action]
One or more options are invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06707-E
Allocation of memory to store the log file path failed.
[Action]
Allocation of memory to store the log file path failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06708-E
Log initialization failed.
[Action]
Log initialization failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06709-E
An internal error occurred.
[Action]
An internal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06710-I
The service is stopped.
[Action]
The service is stopped.
-
KAPM06711-I
The service is running.
[Action]
The service is running.
-
KAPM06712-I
The service is starting.
[Action]
The service is starting.
-
KAPM06713-I
The service is stopping.
[Action]
The service is stopping.
-
KAPM06714-I
The service is now being resumed.
[Action]
The service is now being resumed.
-
KAPM06715-I
The service is now being paused.
[Action]
The service is now being paused.
-
KAPM06716-I
The service is paused.
[Action]
The service is paused.
-
KAPM06717-I
The service does not exist.
[Action]
The service does not exist.
-
KAPM06718-I
The service is disabled.
[Action]
The service is disabled.
-
KAPM06719-E
The service status is currently unknown.
[Action]
The service status is currently unknown.
-
KAPM06720-E
A fatal error occurred.
[Action]
A fatal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06721-I
The hcmdsscmquery command ended.
[Action]
The hcmdsscmquery command ended.
-
KAPM06722-E
An error occurred in the Win32 API.. (API name = aa...aa, error code = bb...bb)
[Action]
An error occurred in the Win32 API.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: API name
bb...bb: Error code
-
KAPM06723-I
The service name is aa...aa.
[Action]
The name of the service currently processing
aa...aa: Service name
-
KAPM06753-E
A property value in the installation information file is invalid. (aa...aa)
[Action]
A property value in the installation information file is invalid.
Check the contents of the installation information file.
aa...aa: Property value
-
KAPM06760-I
A method has started.
[Action]
A method has started.
-
KAPM06761-I
A method has finished.
[Action]
A method has finished.
-
KAPM06762-I
The hcmdsssltool command has started.
[Action]
The hcmdsssltool command has started.
-
KAPM06763-I
The hcmdsssltool command has ended.
[Action]
The hcmdsssltool command has ended.
-
KAPM06764-I
The hcmdsssltool command ended successfully.
[Action]
The hcmdsssltool command ended successfully.
-
KAPM06765-E
An option is invalid.
[Action]
An option is invalid.
Check the options.
-
KAPM06766-E
Creation of a private key failed.
[Action]
Creation of a private key failed.
Check the file output location and the specified distinguished name, and then re-execute the command.
If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06767-E
Creation of a self-signed certificate failed.
[Action]
Creation of a self-signed certificate failed.
Check the file output location and the specified distinguished name, and then re-execute the command.
If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06768-E
Creation of a CSR failed.
[Action]
Creation of a CSR failed.
Check the file output location and the specified distinguished name, and then re-execute the command.
If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06769-E
Creation of a certificate content file failed.
[Action]
Creation of a certificate content file failed.
Check the file output location and the specified distinguished name, and then re-execute the command.
If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06770-E
An internal error occurred.
[Action]
An internal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06771-W
Failed to delete a key store.
[Action]
Failed to delete a key store.
-
KAPM06772-E
No value has been specified for an option.
[Action]
No value has been specified for an option.
Check the options.
-
KAPM06773-E
A fatal error occurred.
[Action]
A fatal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06774-E
The hcmds.home value cannot be acquired.
[Action]
The hcmds.home value cannot be acquired.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06775-E
Analysis of binary data failed.(position = aa...aa,part = bb...bb)
[Action]
Analysis of binary data failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Position
bb...bb: Part
-
KAPM06776-E
The keytool command failed.
[Action]
The keytool command failed.
Take action according to the content of the following messages:
- KAPM06766-E
- KAPM06767-E
- KAPM06768-E
- KAPM06769-E
-
KAPM06777-I
The keytool command has ended.(Return code = aa...aa)
[Action]
The keytool command has ended.
aa...aa: Return code
-
KAPM06780-I
Enter Server Name [default=aa...aa]:
[Action]
Enter Server Name.
aa...aa: Host name
-
KAPM06781-I
Enter Organizational Unit:
[Action]
Enter Organizational Unit.
-
KAPM06782-I
Enter Organization Name [default=aa...aa]:
[Action]
Enter Organization Name.
aa...aa: Host name
-
KAPM06783-I
Enter your City or Locality:
[Action]
Enter your City or Locality:
-
KAPM06784-I
Enter your State or Province:
[Action]
Enter your State or Province.
-
KAPM06785-I
Enter your two-character country-code:
[Action]
Enter your two-character country-code.
-
KAPM06786-I
Is aa...aa correct? (y/n) [default=n]:
[Action]
The Distinguished Name is confirmed.
aa...aa: Distinguished name
-
KAPM06787-E
Creation of a distinguished name failed.
[Action]
Creation of a distinguished name failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06790-E
An IllegalArgumentException occurred.
[Action]
An IllegalArgumentException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06791-E
An IOException occurred.
[Action]
An IOException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06792-E
A HBaseDeleteFileException occurred.
[Action]
A HBaseDeleteFileException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06793-E
An exception occurred.
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06794-E
A KeyStoreException occurred.
[Action]
A KeyStoreException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06795-E
A CertificateException occurred.
[Action]
A CertificateException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06796-E
An UnrecoverableKeyException occurred.
[Action]
An UnrecoverableKeyException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06797-E
A NoSuchAlgorithmException occurred.
[Action]
A NoSuchAlgorithmException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06799-I
aa...aa
[Action]
This message contains debug information.
aa...aa: Debug information
-
KAPM06900-I
Processing to start the service has started.
[Action]
This message is displayed when processing to start the service starts.
-
KAPM06901-I
The service was started successfully.
[Action]
This message is displayed when the service starts successfully. However, if the HiCommand version is earlier than 5.7, you might need to start some of the services manually because they do not start automatically.
-
KAPM06902-I
Processing to stop the service has started.
[Action]
This message is displayed when processing to stop the service starts.
-
KAPM06903-I
The service was stopped successfully.
[Action]
This message is displayed when the service stops successfully.
-
KAPM06904-I
Processing to start the DBMS has started.
[Action]
This message is displayed when processing to start the DBMS starts.
-
KAPM06905-I
The DBMS was started successfully.
[Action]
This message is displayed when the DBMS starts successfully.
-
KAPM06906-I
Processing to stop the DBMS has started.
[Action]
This message is displayed when processing to stop the DBMS starts.
-
KAPM06907-I
The DBMS was stopped successfully.
[Action]
This message is displayed when the DBMS stops successfully.
-
KAPM06908-E
An attempt to start the service has failed.
[Action]
This message is displayed when an attempt to start the service fails.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06909-E
An attempt to stop the service has failed.
[Action]
This message is displayed when an attempt to stop the service fails.
Stop any suite products connected to the DBMS, and then retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06910-E
An attempt to start the DBMS has failed.
[Action]
This message is displayed when an attempt to start the DBMS fails.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06911-E
An attempt to stop the DBMS has failed.
[Action]
This message is displayed when an attempt to stop the DBMS fails.
Stop any suite products connected to the DBMS, and then retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06912-E
An attempt to start the service or the DBMS has failed.
[Action]
This message is displayed when an attempt to start the service or the DBMS fails.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06913-E
An attempt to stop the service or the DBMS has failed.
[Action]
This message is displayed when an attempt to stop the service or the DBMS fails.
Stop any suite products connected to the DBMS, and then retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06914-E
The database has not been initialized.
[Action]
The database has not been initialized.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06915-E
An attempt to release the connection of the connection pool has failed.
[Action]
This message is displayed when an attempt to release the connection of the connection pool fails.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06920-W
Log initialization failed.
[Action]
Log initialization failed.
If the problem occurs frequently, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM06921-E
A memory allocation error occurred.
[Action]
A memory allocation error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06922-E
The aa...aa command will stop because setting an environment variable failed. (details = bb...bb)
[Action]
The specified command stopped because setting an environment variable failed.
Re-execute the command. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
bb...bb: Details
-
KAPM06923-E
The aa...aa command will stop because internal processing failed. (details = bb...bb)
[Action]
The specified command stopped because internal processing failed.
Re-execute the command. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
bb...bb: Details
-
KAPM06924-E
An error occurred in an internal function. (function = aa...aa, error code = bb...bb)
[Action]
An error occurred in an internal function.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Function
bb...bb: Error code
-
KAPM06925-E
A system environment variable is invalid.
[Action]
A system environment variable was invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM06926-E
The aa...aa command will stop because setting an environment variable failed. (details = bb...bb)
[Action]
The specified command stopped because setting an environment variable failed.
Re-execute the command. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
bb...bb: Details
-
KAPM06927-E
The aa...aa command will stop because internal processing failed. (details = bb...bb)
[Action]
The specified command stopped because internal processing failed.
Re-execute the command. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
bb...bb: Details
-
KAPM07000-W
Update the current JavaScript to the latest version.
[Action]
Update the current JavaScript to the latest version.
-
KAPM07001-E
The specified user cannot log in because the user does not have permission to access the manager screen.
[Action]
The specified user cannot log in because the user does not have permission to access the manager screen.
Log in as a user who has HiCommand Base Administrator permissions.
-
KAPM07002-E
The application is not registered on the HSSO Server.
[Action]
The application is not registered on the HSSO Server.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07003-E
The user ID and/or password are not correct.
[Action]
The user ID and/or password are not correct.
Input the correct user ID and password.
-
KAPM07004-E
The executing user does not have permission to execute the method.
[Action]
The executing user does not have permission to execute the method.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07005-E
The specified user does not exist.
[Action]
The specified user does not exist.
Confirm the user information.
-
KAPM07006-E
The specified user already exists.
[Action]
The specified user already exists.
Input a value other than the specified user name.
-
KAPM07007-E
This user has already been deleted.
[Action]
This user has already been deleted.
Confirm the user information.
-
KAPM07008-E
A problem occurred during processing.
[Action]
A problem occurred during processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07009-E
A communication error occurred during processing.
[Action]
A communication error occurred during processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07010-E
Null is specified for the argument.
[Action]
Null is specified for the argument.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07011-E
A fatal error occurred during processing.
[Action]
A fatal error occurred during processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07012-E
The specified group does not exist.
[Action]
The specified group does not exist.
Confirm the group information.
-
KAPM07013-E
An attempt to register user information has failed, because a problem occurred during registration processing.
[Action]
An attempt to register user information has failed, because a problem occurred during registration processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07014-E
An attempt to update user information has failed, because a problem occurred during update processing.
[Action]
An attempt to update user information has failed, because a problem occurred during update processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07015-E
An attempt to delete user information has failed, because a problem occurred during deletion processing.
[Action]
An attempt to delete user information has failed, because a problem occurred during deletion processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07016-E
An attempt to change the password has failed, because a problem occurred while processing the change.
[Action]
An attempt to change the password has failed, because a problem occurred while processing the change.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07017-E
A problem occurred during an attempt to acquire user information.
[Action]
A problem occurred during an attempt to acquire user information.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07018-E
A problem occurred during an attempt to acquire group information.
[Action]
A problem occurred during an attempt to acquire group information.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07019-I
The user information was successfully deleted.
[Action]
The user information was successfully deleted.
-
KAPM07020-I
User ID aa...aa will be deleted.
If deleted, this user will not be able to log on. Is this OK?
[Action]
User ID aa...aa will be deleted.
If deleted, this user will not be able to log on. Is this OK?
aa...aa: User ID
-
KAPM07021-E
A problem occurred during an attempt to acquire HiCommand application information.
[Action]
A problem occurred during an attempt to acquire HiCommand application information.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07022-E
An attempt to update HiCommand application information has failed, because a problem occurred during update processing.
[Action]
An attempt to update HiCommand application information has failed, because a problem occurred during update processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07023-I
HiCommand application information will now be updated.
[Action]
HiCommand application information will now be updated.
-
KAPM07024-E
A problem occurred during an attempt to acquire user application information.
[Action]
A problem occurred during an attempt to acquire user application information.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07025-E
An attempt to update user application information has failed, because a problem occurred during update processing.
[Action]
An attempt to update user application information has failed, because a problem occurred during update processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07026-I
User application information will now be updated.
[Action]
User application information will now be updated.
-
KAPM07027-W
The specified user application name already exists. application name = aa...aa
[Action]
The specified user application name already exists.
Input a value other than the specified application name.
aa...aa: Application name
-
KAPM07028-E
Input Item:aa...aa
This entry is required. Enter a value.
[Action]
This entry is required. Enter a value.
Input a value.
aa...aa: Input item
-
KAPM07029-E
Input Item:aa...aa
A character that cannot be used for this entry has been entered.
[Action]
A character that cannot be used for this entry has been entered.
Use only characters that are valid for this item.
aa...aa: Input item
-
KAPM07030-E
Input Item:aa...aa
The number of characters in this entry exceeds the maximum.
[Action]
The number of characters in this entry exceeds the maximum.
Input a character string of a length less than or equal to the maximum.
aa...aa: Input item
-
KAPM07031-E
The password entries do not match.
[Action]
The password entries do not match.
Make sure that the values for the password and password confirmation input items are identical.
-
KAPM07032-E
Input Item:aa...aa
Enter from 4 to 255 characters for this entry.
[Action]
Enter from 4 to 255 characters for this entry.
Input a character string of a length between 4 and 255 characters (inclusive) for this input item.
aa...aa: Input item
-
KAPM07033-W
The specified URL does not exist in the class. URL = aa...aa
[Action]
The specified URL does not exist in the class.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: URL
-
KAPM07034-E
IllegalDataException occurred. (details = aa...aa)
[Action]
IllegalDataException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Details
-
KAPM07035-E
The format of the specified URL is invalid. URL = aa...aa
[Action]
The format of the specified URL is invalid.
Check the entered URL. If necessary, enter the correct URL.
aa...aa: URL
-
KAPM07036-I
The password will change. Is this OK?
[Action]
The password will change. Is this OK?
-
KAPM07037-I
The password will change. Is this OK?
After the password changes, you must log in again.
[Action]
The password will change. Is this OK?
After the password changes, you must log in again.
-
KAPM07038-E
Input Item:aa...aa
The same value cannot be specified into these input items.
[Action]
The same value cannot be specified into these input items.
Please reinput other values in an input item.
aa...aa: Input item
-
KAPM07230-I
The user was registered successfully. (operator = aa...aa, user ID = bb...bb, function = cc...cc)
[Action]
This is an audit log showing that the user has been registered successfully.
aa...aa: Operator name
bb...bb: Processed user ID
cc...cc: Function name
-
KAPM07231-I
The user was deleted successfully. (operator = aa...aa, user ID = bb...bb, function = cc...cc)
[Action]
This is an audit log showing that the user has been deleted successfully.
aa...aa: Operator name
bb...bb: Processed user ID
cc...cc: Function name
-
KAPM07232-I
The password was changed successfully. (operator = aa...aa, user ID = bb...bb, function = cc...cc)
[Action]
This is an audit log showing that the password has been changed successfully.
aa...aa: Operator name
bb...bb: Processed user ID
cc...cc: Function name
-
KAPM07233-I
The user information was modified successfully. (operator = aa...aa, user ID = bb...bb, function = cc...cc)
[Action]
This is an audit log showing that the user information has been modified successfully.
aa...aa: Operator name
bb...bb: Processed user ID
cc...cc: Function name
-
KAPM07235-I
The user was locked successfully. (operator = aa...aa, user ID = bb...bb, function = cc...cc)
[Action]
This is an audit log showing that the user has been locked successfully.
aa...aa: Operator name
bb...bb: Processed user ID
cc...cc: Function name
-
KAPM07236-I
The user was unlocked successfully. (operator = aa...aa, user ID = bb...bb, function = cc...cc)
[Action]
This is an audit log showing that the user has been unlocked successfully.
aa...aa: Operator name
bb...bb: Processed user ID
cc...cc: Function name
-
KAPM07237-E
The specified password does not satisfy the entry conditions. (operator = aa...aa, user ID = bb...bb, function = cc...cc)
[Action]
This is an audit log that shows that the password that doesn't meet the input requirement is specified.
aa...aa: Operator name
bb...bb: Processed user ID
cc...cc: Function name
-
KAPM07238-E
The specified e-mail is too long. (operator = aa...aa, user ID = bb...bb, function = cc...cc)
[Action]
This is an audit log that shows that the e-mail string that is too long is specified.
aa...aa: Operator name
bb...bb: Processed user ID
cc...cc: Function name
-
KAPM07239-E
The old password is incorrect. (operator = aa...aa, user ID = bb...bb, function = cc...cc)
[Action]
This is an audit log that shows that the old password is incorrect.
aa...aa: Operator name
bb...bb: Processed user ID
cc...cc: Function name
-
KAPM07240-E
An attempt to execute the aa...aa operation has failed. (operator = bb…bb, user ID = cc…cc, function = dd…dd)
[Action]
This is an audit log that shows that the aa...aa process has failed.
aa...aa: Operation name
bb...bb: Operator name
cc...cc: Processed user ID
dd...dd: Function name
-
KAPM07241-I
A user was registered successfully. (user ID = aa...aa)
[Action]
This audit log data indicates that a user was registered successfully.
aa...aa: User ID
-
KAPM07242-E
Registration of a user has failed. (user ID = aa...aa)
[Action]
This audit log data indicates that registration of a user has failed.
aa...aa: User ID
-
KAPM07243-I
The user information was updated successfully. (user ID = aa...aa)
[Action]
This audit log data indicates that the user information was modified successfully.
aa...aa: User ID
-
KAPM07244-E
An attempt to update the user information has failed. (user ID = aa...aa)
[Action]
This audit log data indicates that an attempt to update the user information has failed.
aa...aa: User ID
-
KAPM07245-I
A user was deleted successfully. (user ID = aa...aa)
[Action]
This audit log data indicates that a user was deleted successfully.
aa...aa: User ID
-
KAPM07246-E
Deletion of a user has failed. (user ID = aa...aa)
[Action]
This audit log data indicates that deletion of a user has failed.
aa...aa: User ID
-
KAPM07247-I
The authorization group was added successfully. (operator = aa...aa, distinguished name = bb...bb, function = cc...cc)
[Action]
This is an audit log that shows all the authorization groups that have been added successfully.
aa...aa: Operator name
bb...bb: Distinguished name
cc...cc: Function name
-
KAPM07248-E
An attempt to execute the aa...aa operation has failed. (operator = bb...bb, distinguished name = cc...cc, function = dd...dd)
[Action]
This is an audit log that shows the failed aa...aa processes.
aa...aa: Operation name
bb...bb: Operator name
cc...cc: Distinguished name
dd...dd: Function name
-
KAPM07249-I
The authorization group was deleted successfully. (operator = aa...aa, distinguished name = bb...bb, function = cc...cc)
[Action]
This is an audit log that shows all the authorization groups that have been deleted successfully.
aa...aa: Operator name
bb...bb: Distinguished name
cc...cc: Function name
-
KAPM07250-I
The permissions were changed successfully. (operator = aa...aa, distinguished name = bb...bb, permissions = cc...cc)
[Action]
This is an audit log that shows all the permissions that have been changed successfully.
aa...aa: Operator name
bb...bb: Distinguished name
cc...cc: Permissions after they were changed
-
KAPM07251-I
The authorization group was registered successfully. (distinguished name = aa...aa)
[Action]
This is an audit log that shows all the authorization groups that have been registered successfully.
aa...aa: Distinguished name
-
KAPM07252-E
An attempt to register the authorization group has failed. (distinguished name = aa...aa)
[Action]
This is an audit log that shows all the authorization groups that have failed to be registered.
aa...aa: Distinguished name
-
KAPM07253-I
The authorization group was deleted successfully. (distinguished name = aa...aa)
[Action]
This is an audit log that shows all the authorization groups that have been deleted successfully.
aa...aa: Distinguished name
-
KAPM07254-E
An attempt to delete the authorization group has failed. (distinguished name = aa...aa)
[Action]
This is an audit log that shows all the authorization groups that have failed to be deleted.
aa...aa: Distinguished name
-
KAPM07255-I
The authorization group's permissions were changed successfully. (distinguished name = aa...aa)
[Action]
This is an audit log that shows all the authorization group permissions that have been changed successfully.
aa...aa: Distinguished name
-
KAPM07256-E
An attempt to change the authorization group's permissions has failed. (distinguished name = aa...aa)
[Action]
This is an audit log that shows all the authorization group permissions that have failed to be changed.
aa...aa: Distinguished name
-
KAPM07257-I
The resource group was successfully registered. (resource group name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
This audit log entry shows that the resource group was successfully registered.
aa...aa: Resource group name
bb...bb: Device type
cc...cc: Device number
-
KAPM07258-E
Registration of the resource group failed. (resource group name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
This audit log entry shows that registration of the resource group failed.
aa...aa: Resource group name
bb...bb: Device type
cc...cc: Device number
-
KAPM07259-I
The resource group was successfully deleted. (resource group name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
This audit log entry shows that the resource group was successfully deleted.
aa...aa: Resource group name
bb...bb: Device type
cc...cc: Device number
-
KAPM07260-E
Deletion of the resource group failed. (resource group name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
This audit log entry shows that deletion of the resource group failed.
aa...aa: Resource group name
bb...bb: Device type
cc...cc: Device number
-
KAPM07261-I
The resource group was successfully updated. (resource group name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
This audit log entry shows that the resource group was successfully updated.
aa...aa: Resource group name
bb...bb: Device type
cc...cc: Device number
-
KAPM07262-E
Updating of the resource group failed. (resource group name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
This audit log entry shows that updating of the resource group failed.
aa...aa: Resource group name
bb...bb: Device type
cc...cc: Device number
-
KAPM07263-I
The user group was successfully registered. (resource group name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
This audit log entry shows that the user group was successfully registered.
aa...aa: User group name
bb...bb: Device type
cc...cc: Device number
-
KAPM07264-E
Registration of the user group failed. (user group name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
This audit log entry shows that the user group was successfully registered.
aa...aa: User group name
bb...bb: Device type
cc...cc: Device number
-
KAPM07265-I
The user group was successfully deleted. (user group name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
This audit log entry shows that the user group was successfully deleted.
aa...aa: User group name
bb...bb: Device type
cc...cc: Device number
-
KAPM07266-E
Deletion of the user group failed. (user group name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
This audit log entry shows that deletion of the user group failed.
aa...aa: User group name
bb...bb: Device type
cc...cc: Device number
-
KAPM07267-I
The user group was successfully updated. (user group name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
This audit log entry shows that the user group was successfully updated.
aa...aa: User group name
bb...bb: Device type
cc...cc: Device number
-
KAPM07268-E
Updating of the user group failed. (user group name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
This audit log entry shows that updating of the user group failed.
aa...aa: User group name
bb...bb: Device type
cc...cc: Device number
-
KAPM07269-I
The role was successfully registered. (role name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
This audit log entry shows that the role was successfully registered.
aa...aa: Role name
bb...bb: Device type
cc...cc: Device number
-
KAPM07270-E
Registration of the role failed. (role name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
This audit log entry shows that registration of the role failed.
aa...aa: Role name
bb...bb: Device type
cc...cc: Device number
-
KAPM07271-I
The role was successfully deleted. (role name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
This audit log entry shows that the role was successfully deleted.
aa...aa: Role name
bb...bb: Device type
cc...cc: Device number
-
KAPM07272-E
Deletion of the role failed. (role name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
This audit log entry shows that deletion of the role failed.
aa...aa: Role name
bb...bb: Device type
cc...cc: Device number
-
KAPM07273-I
The role was successfully updated. (role name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
This audit log entry shows that the role was successfully updated.
aa...aa: Role name
bb...bb: Device type
cc...cc: Device number
-
KAPM07274-E
Updating of the role failed. (role name = aa...aa, device type = bb...bb, device number = cc...cc)
[Action]
This audit log entry shows that updating of the role failed.
aa...aa: Role name
bb...bb: Device type
cc...cc: Device number
-
KAPM07275-I
The user account was successfully assigned to the user group. (user group name = aa...aa, user ID = bb...bb)
[Action]
This audit log entry shows that the user account was successfully assigned to the user group.
aa...aa: User group name
bb...bb: User ID
-
KAPM07276-E
The user account failed to be assigned to the user group. (user group name = aa...aa, user ID = bb...bb)
[Action]
This audit log entry shows that the user account failed to be assigned to the user group.
aa...aa: User group name
bb...bb: User ID
-
KAPM07277-I
The permission was successfully assigned to the role. (role name = aa...aa, permission name = bb...bb)
[Action]
This audit log entry shows that the permission was successfully assigned to the role.
aa...aa: Role name
bb...bb: Permission name
-
KAPM07278-E
The permission failed to be assigned to the role. (role name = aa...aa, permission name = bb...bb)
[Action]
This audit log entry shows that the permission failed to be assigned to the role.
aa...aa: Role name
bb...bb: Permission name
-
KAPM07279-I
Assignment processing was successful for a user group and an external authentication group, a resource group, and a role. (user group name and external authentication group name = aa...aa, resource group name = bb...bb, role name = cc...cc)
[Action]
This audit log entry shows that assignment processing was successful for the following:
- A user group and an external authentication group
- A resource group
- A role
aa...aa: User group name and external authentication group name
bb...bb: Resource group name
cc...cc: Role name
-
KAPM07280-E
Assignment processing failed for a user group and an external authentication group, a resource group, and a role. (user group name and external authentication group name = aa...aa, resource group name = bb...bb, role name = cc...cc)
[Action]
This audit log entry shows that assignment processing failed for the following:
- A user group and an external authentication group
- A resource group
- A role
aa...aa: User group name and external authentication group name
bb...bb: Resource group name
cc...cc: Role name
-
KAPM07300-I
The hcmdshpsimcert command has started.
[Action]
The hcmdshpsimcert command started.
-
KAPM07301-I
The hcmdshpsimcert command has terminated.
[Action]
The hcmdshpsimcert command ended.
-
KAPM07302-I
The hcmdshpsimcert command was successful.
[Action]
The hcmdshpsimcert command was successful.
-
KAPM07303-E
The hcmdshpsimcert command has failed.
[Action]
The hcmdshpsimcert command failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07306-E
The value of hcmds.home cannot be acquired.
[Action]
The hcmds.home value cannot be acquired.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07307-E
An option is invalid.
[Action]
An option is invalid.
Please revise the option specification.
-
KAPM07308-E
An exception occurred.
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07309-E
An internal error occurred.
[Action]
An internal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07310-I
Importing of the certificate has started.
[Action]
Importing of the certificate started.
-
KAPM07311-I
Importing of the certificate has ended.
[Action]
Importing of the certificate ended.
-
KAPM07312-E
The host name or the port number is invalid.
[Action]
The host name is invalid.
Please revise the specified host name.
-
KAPM07313-E
An attempt to communicate with the HPSIM server has failed.
[Action]
Communication with the HPSIM server failed.
Please confirm whether the HPSIM server running.
-
KAPM07314-E
The format of the certificate acquired from the HPSIM server is invalid.
[Action]
The format of the certificate acquired from the HPSIM server is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07315-E
An attempt to load the keystore file has failed.
[Action]
An attempt to load the keystore file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07316-W
The certificate of the specified host is already registered.
[Action]
The certificate of the specified host has already been registered.
-
KAPM07317-I
The following certificate was imported into the keystore.
[Action]
The following certificate was imported to the keystore.
-
KAPM07318-E
An attempt to output the keystore file has failed.
[Action]
An attempt to output the keystore file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07319-E
An attempt to input the keystore file has failed.
[Action]
An attempt to input the keystore file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07320-I
Host name: "aa...aa"
[Action]
Host name
aa...aa: Host name
-
KAPM07321-I
Processing to display the certificate list has started.
[Action]
Processing to display the certificate list started.
-
KAPM07322-I
Processing to display the certificate list has ended.
[Action]
Processing to display the certificate list ended.
-
KAPM07323-I
The certificate is not stored.
[Action]
The certificate is not stored.
-
KAPM07324-E
A problem occurred while displaying the certificate list.
[Action]
A problem occurred while displaying the certificate list.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07325-I
Deletion of the certificate has started.
[Action]
Deletion of the certificate started.
-
KAPM07326-I
The certificate has been deleted.
[Action]
The certificate has been deleted.
-
KAPM07327-I
The certificate for the aa...aa host was deleted.
[Action]
The certificate of the specified host was deleted.
aa...aa: Host name
-
KAPM07328-W
The certificate for the aa...aa host is not registered.
[Action]
The certificate of the specified host name is not registered.
aa...aa: Host name
-
KAPM07329-E
An attempt to delete the certificate has failed.
[Action]
An attempt to delete the certificate has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07330-E
An attempt to renew the keystore has failed.
[Action]
An attempt to modify the keystore has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07342-E
An exception occurred.
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07343-E
An internal error occurred.
[Action]
An internal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07344-I
GET processing for "/Proxy/Getkey" has started.
[Action]
The GET processing of "/Proxy/GetKey" started.
-
KAPM07345-I
GET processing for "/Proxy/Getkey" has ended.
[Action]
The GET processing of "/Proxy/GetKey" ended.
-
KAPM07346-I
The request from "aa...aa" was accepted.
[Action]
The request from aa...aa was accepted.
aa...aa: Host name
-
KAPM07347-I
The one-time key was issued. (key = aa...aa)
[Action]
The one-time key was issued. (key = aa...aa)
aa...aa: Onetimekey
-
KAPM07348-E
An attempt to issue the one-time key has failed.
[Action]
An attempt to issue the one-time key has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07349-E
An attempt to create the one-time key failed because the number of keys had exceeded the maximum.
[Action]
An attempt to create the one-time key failed because the number of keys exceeded the maximum.
Please check whether a one-time key has been generated illegally.
-
KAPM07350-W
The one-time key does not exist. (key = aa...aa)
[Action]
The one-time key does not exist. (key = aa...aa)
aa...aa: Onetimekey
-
KAPM07351-W
The expiration date of the one-time key has passed. (key = aa...aa)
[Action]
The one-time key expired. (key = aa...aa)
aa...aa: Onetimekey
-
KAPM07352-I
The one-time key was deleted normally. (key = aa...aa)
[Action]
The one time key was deleted normally. (key = aa...aa)
aa...aa: Onetimekey
-
KAPM07355-I
The one-time key that passed the expiration date was deleted. (key = aa...aa)
[Action]
The expired one-time key was deleted. (key = aa...aa)
aa...aa: Onetimekey
-
KAPM07356-I
GET processing for "/Proxy/SSO" has started.
[Action]
The GET processing of "/Proxy/SSO" started.
-
KAPM07357-I
GET processing for "/Proxy/SSO" has ended.
[Action]
The GET processing of "/Proxy/SSO" ended.
-
KAPM07358-E
An error occurred during a parameter check.
[Action]
An error occurred during a parameter check.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07359-I
Parameter output: "aa...aa" = "bb...bb"
[Action]
Parameter output: aa...aa = bb...bb
aa...aa: Parameter
bb...bb: value
-
KAPM07360-E
An attempt to load the keystore has failed.
[Action]
An attempt to load the keystore has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07363-I
The host name is valid.
[Action]
The host name is valid.
-
KAPM07364-E
The host name is invalid.
[Action]
The host name is invalid.
Please make sure the certificate from the launch-source has been imported.
-
KAPM07367-I
The one-time key is valid.
[Action]
The one-time key is valid.
-
KAPM07368-W
The one-time key is invalid.
[Action]
The one-time key is invalid.
-
KAPM07371-I
Verification of the request parameter was successful.
[Action]
Verification of the request parameter was successful.
-
KAPM07372-E
An attempt to verify the request parameter has failed.
[Action]
Verification of the request parameter failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07375-I
The URL is a normal value.
[Action]
The URL value is normal.
-
KAPM07376-E
The URL is an invalid value.
[Action]
The URL value is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07377-E
An attempt to convert the aa...aa permission has failed.
[Action]
An attempt to convert the aa...aa permission has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Authority name
-
KAPM07378-I
A redirection to "aa...aa" will be performed.
[Action]
The user will be redirected to aa...aa.
aa...aa: redirect URL
-
KAPM07379-E
An attempt to load the keystore file has failed.
[Action]
An attempt to load the keystore file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07380-I
The certificate of aa...aa has been imported.
[Action]
The aa...aa certificate has been imported.
aa...aa: Alias
-
KAPM07381-E
The certificate of aa...aa has not been imported.
[Action]
The aa...aa certificate has not been imported.
Please confirm whether the certificate is importing done.
aa...aa: Alias
-
KAPM07382-E
A server problem occurred.
[Action]
A problem with the server occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07383-I
Data verification has started.
[Action]
Verification of the data started.
-
KAPM07384-I
Data verification has ended.
[Action]
Verification of the data ended.
-
KAPM07385-E
An invalid character string was specified for the token.
[Action]
An invalid character string was specified for the token.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07386-E
"SHA1with RSA" is not supported.
[Action]
"SHA1withRSA" is not supported.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07387-E
The certificate format is invalid.
[Action]
The format of the certificate is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07388-E
The signature object has not been initialized.
[Action]
The signature object has not been initialized.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07389-E
"US-ASCII" is not supported.
[Action]
"US-ASCII" is not supported.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07390-I
Generation of the HSSO token has started.
[Action]
Generation of the HSSO token started.
-
KAPM07391-I
Generation of the HSSO token has ended.
[Action]
Generation of the HSSO token ended.
-
KAPM07392-E
The permission conversion definition file was not found.
[Action]
The permission conversion definition file was not found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07393-E
An attempt to load the permission conversion definition file has failed.
[Action]
An attempt to load the permission conversion definition file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07400-E
The definition file was not found.
[Action]
The definition file was not found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07401-I
Generation of the X509 certificate object has started.
[Action]
Generation of the X509 certificate object started.
-
KAPM07402-I
Generation of the X509 certificate object has ended.
[Action]
Generation of the X509 certificate object ended.
-
KAPM07403-E
The specified port number is invalid.
[Action]
The specified port number is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07404-E
The host name is invalid.
[Action]
The host name is invalid.
Take action according to the proceeding message.
-
KAPM07405-E
An attempt to communicate with the HPSIM server has failed.
[Action]
An attempt to communicate with the HPSIM server has failed.
Please confirm whether the HPSIM server running.
-
KAPM07406-E
The format of the certificate acquired from HPSIM is invalid.
[Action]
The format of the certificate acquired from HPSIM is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07407-E
An attempt to output the keystore file has failed.
[Action]
An attempt to output the keystore file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07410-I
Authentication succeeded.
[Action]
Authentication succeeded.
-
KAPM07411-W
Authentication failed.
[Action]
Authentication failed.
-
KAPM07420-E
Null is specified for the argument. (aa...aa)
[Action]
Null is specified for the argument.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Argument
-
KAPM07421-E
A specified value is invalid. (aa...aa, bb...bb)
[Action]
The specified value is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Parameter
bb...bb: Value
-
KAPM07422-E
An exception occurred.
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM07423-E
The domain name is invalid.
[Action]
There is an unusable character in the domain name sent from HPSIM.
Please revise the HPSIM domain name.
-
KAPM07424-E
The user name is invalid.
[Action]
There is an unusable character in the user name sent from HPSIM.
Please revise the HPSIM user name.
-
KAPM07430-E
Authentication failed.
[Action]
Authentication failed.
Please fix the cause of the error. For details on the cause, see the HpsimSSO[n] log.
-
KAPM08001-E
A fatal error occurred during processing.
[Action]
A fatal error occurred during processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08002-E
Illegal parameters have been specified to create HSSO Context.
[Action]
Illegal parameters have been specified to create HSSO Context.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08003-E
A CIMException was generated during Console screen display processing.
[Action]
A CIMException was generated during Console screen display processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08004-E
A CIMRepositoryException was generated during menu bar display processing.
[Action]
A CIMRepositoryException was generated during menu bar display processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08005-E
A CIMProviderException was generated during menu bar display processing.
[Action]
A CIMProviderException was generated during menu bar display processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08006-E
A NoSuchElementException was generated during menu bar display processing.
[Action]
A NoSuchElementException was generated during menu bar display processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08007-E
A CIMException was generated during menu bar display processing.
[Action]
A CIMException was generated during menu bar display processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08008-E
An error occurred on the HSSO Server.
[Action]
An error occurred on the HSSO Server.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08009-I
The logout process has completed.
[Action]
The logout process has completed.
-
KAPM08010-E
An internal error occurred.
[Action]
An internal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08011-E
Your session is invalid.
[Action]
Your session is invalid.
Logout, and then login again.
-
KAPM08013-E
A frame-enabled browser is required.
[Action]
A frame-enabled browser is required.
Use a browser supported by the HiCommand product being used.
-
KAPM08014-I
Now loading...
[Action]
Now loading.
-
KAPM08015-E
The registered data in the common repository is invalid.(aa...aa)
[Action]
The registered data in the common repository is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Class name
-
KAPM08016-E
The registered data in the common repository is invalid.
[Action]
The registered data in the common repository is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08017-E
The registered data in the common repository is invalid.
[Action]
The registered data in the common repository is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08018-E
The token is invalid.
[Action]
The token is invalid.
Logout, and then login again.
-
KAPM08019-E
An error occurred on the SSO Server.
[Action]
An error occurred on the SSO server.
Logout, and then login again.
-
KAPM08020-E
An attempt to communicate with the SSO server has failed.
[Action]
An attempt to communicate with the SSO server has failed.
Logout, and then login again.
-
KAPM08021-E
The DBMS is stopped.
[Action]
The DBMS is stopped.
Make sure the DBMS has started.
-
KAPM08022-E
The Common Component database is blocked.
[Action]
The Common Component database is blocked.
Please contact the server administrator.
-
KAPM08100-E
Null is specified for the argument.
[Action]
Null is specified for the argument.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08101-E
The specified node was not found. key=(aa...aa)
[Action]
The specified node was not found.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Node key
-
KAPM08102-E
The object tree has not been created.
[Action]
The object tree has not been created.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08103-E
An attempt to create the object tree has failed.
[Action]
An attempt to create the object tree has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08104-E
An attempt to add a child node to the object tree has failed. (aa...aa)
[Action]
An attempt to add a child node to the object tree has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Node key
-
KAPM08105-E
The specified node has already been registered. key=(aa...aa)
[Action]
The specified node has already been registered.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Node key
-
KAPM08106-E
The tree information cannot be acquired. (aa...aa)
[Action]
The tree information cannot be acquired.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Node key
-
KAPM08107-E
The node information is invalid. (aa...aa, bb...bb)
[Action]
The node information is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Parameter name
bb...bb: Acquired value
-
KAPM08108-E
An invalid argument was specified during node creation. (aa...aa, bb...bb)
[Action]
An invalid argument was specified during node creation.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Parameter name
bb...bb: Acquired value
-
KAPM08109-E
The tree information is invalid. (aa...aa, bb...bb)
[Action]
The tree information is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Route-node key (database)
bb...bb: Route-node key (memory)
-
KAPM08110-E
The node array cannot be acquired. (aa...aa, bb...bb)
[Action]
The node array cannot be acquired.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Parameter name
bb...bb: Acquired value
-
KAPM08111-E
The hierarchy number of the node array cannot be acquired. (aa...aa, bb...bb)
[Action]
The hierarchy number of the node array cannot be acquired.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Parameter name
bb...bb: Acquired value
-
KAPM08112-E
The node array is invalid. (aa...aa, bb...bb)
[Action]
The node array is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Parameter name
bb...bb: Acquired value
-
KAPM08113-E
The hierarchy number of the node array is invalid. (aa...aa)
[Action]
The hierarchy number of the node array is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Hierarchy number of the node
-
KAPM08114-W
An invalid argument was specified during node creation. (aa...aa, bb...bb)
[Action]
An invalid argument was specified during node creation.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Parameter name
bb...bb: Acquired value
-
KAPM08115-E
An internal error occurred.
[Action]
An internal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08116-E
A value that exceeds the maximum value has been specified. (aa...aa, bb...bb)
[Action]
A value that exceeds the maximum value has been specified.
Check and, if necessary, revise the settings.
aa...aa: Parameter name
bb...bb: Acquired value
-
KAPM08150-E
The request is invalid. (aa...aa, bb...bb)
[Action]
The request is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Key
bb...bb: Value
-
KAPM08152-E
The request is invalid. (aa...aa)
[Action]
The request is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Key
-
KAPM08154-E
An attempt to display the object tree has failed.
[Action]
An attempt to display the object tree has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08160-E
The data registered in the common repository is invalid. (aa...aa, bb...bb)
[Action]
The data registered in the common repository is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Key
bb...bb: Value
-
KAPM08200-E
The request parameter required for the display of the Application Bar area is invalid.
[Action]
The request parameter required for the display of the Application Bar Area is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08201-E
An internal error occurred.
If you click the "Refresh Tree" button, the initial object tree will be displayed. If you cannot display the tree, log out, and then log in again.
[Action]
An internal error occurred.
If you click the "Refresh Tree" button, the initial object tree will be displayed. If you cannot display the tree, log out, and then log in again.
Click the "Refresh Tree" button to display the initial object tree. If the initial object tree cannot be displayed, log in again. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM08202-E
The number of elements in the array does not match the other arrays.
[Action]
The number of elements in the array does not match the other arrays.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08203-E
The request parameter required for the display of the Summary area is invalid.
[Action]
The request parameter required for the display of the Summary area is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08302-E
An error occurred while acquiring the resource bundle.
[Action]
An error occurred while acquiring resource bundle.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08303-E
An error occurred while reading the resource file.
[Action]
An error occurred during resource file input.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08304-E
An attempt to access the resource file has failed.
[Action]
An attempt to access the resource file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08308-E
An internal error occurred.
[Action]
An internal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08309-E
The URL object cannot be created.
[Action]
URL object was not able to be made.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08311-E
An attempt to access the file has failed.
[Action]
An attempt to access the file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08402-E
An unusable HTML tag is included.
[Action]
This message is displayed when the message entered by the user contains an unusable HTML tag.
Please enter supported HTML tags only.
-
KAPM08403-E
The warning banner message exceeded 1000 characters.
[Action]
This message is displayed when the warning banner message entered by the user exceeds 1000 characters.
Enter no more than 1000 characters.
-
KAPM08404-E
An attempt to register the warning banner message has failed.
[Action]
This message is displayed when an attempt to register a warning banner message from the security GUI window fails.
Perform the following procedure:
1. Confirm that the following folder exists:
In Windows: <HiCommand-installation-directory>\Base\conf\sec\resource
In Solaris: /opt/HiCommand/Base/conf/sec/resource
In Linux: <HiCommand-installation-directory>/Base/conf/sec/resource
2. Delete the following folder if it exists:
In Windows: <HiCommand-installation-directory>\Base\conf\sec\resource\bannerresource.properties
In Solaris: /opt/HiCommand/Base/conf/sec/resource/bannerresource.properties
In Linux: <HiCommand-installation-directory>/Base/conf/sec/resource/bannerresource.properties
3. Make sure that you have access permissions for the following file.
In Windows: <HiCommand-installation-directory>\Base\conf\sec\resource\bannerresource.properties
In Solaris: /opt/HiCommand/Base/conf/sec/resource/bannerresource.properties
In Linux: <HiCommand-installation-directory>/Base/conf/sec/resource/bannerresource.properties
4. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM08405-E
An attempt to delete the warning banner message has failed.
[Action]
This message is displayed when an attempt to delete a warning banner message from the security GUI window fails.
Perform the following procedure:
1. Confirm that the following file exists:
In Windows: <HiCommand-installation-directory>\Base\conf\sec\resource\bannerresource.properties
In Solaris: /opt/HiCommand/Base/conf/sec/resource/bannerresource.properties
In Linux: <HiCommand-installation-directory>/Base/conf/sec/resource/bannerresource.properties
2. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM08406-E
The specified file name already exists as a directory name. (directory name = aa...aa)
[Action]
This message is output to the log when an attempt to register a warning banner message from the security GUI window fails.
The system environment is invalid. detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Directory name
-
KAPM08407-E
The specified directory name already exists as a file name. (file name = aa...aa)
[Action]
This message is output to the log when an attempt to register a warning banner message from the security GUI window fails.
The system environment is invalid. detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM08408-E
The directory does not exist. (directory name = aa...aa)
[Action]
This message is output to the log when an attempt to register a warning banner message from the security GUI window fails.
Please create the following folder, and then try again:
Windows:
<HiCommand-installation-directory>\Base\conf\sec
Solaris:
/opt/HiCommand/Base/conf/sec
Linux:
<HiCommand-installation-directory>/Base/conf/sec
aa...aa: Directory name
-
KAPM08409-E
An attempt to delete the warning banner message has failed.
[Action]
This message is output to the log when an attempt to delete a warning banner message from the security GUI window fails.
Check that the following file exists:
Windows:
<HiCommand-installation-directory>\Base\conf\sec\resource\bannerresource.properties
Solaris: /opt/HiCommand/Base/conf/sec/resource/bannerresource.properties
Linux:
<HiCommand-installation-directory>/Base/conf/sec/resource/bannerresource.properties
-
KAPM08410-E
The specified node is invalid. (node name = aa...aa)
[Action]
This message is displayed when an invalid node is specified in the tree display in the security GUI window.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Node name
-
KAPM08411-E
hcmds.home is not set in the Java system properties.
[Action]
hcmds.home has not been set in the Java system properties.
Make sure that hcmds.home has been set in the Java system properties.
-
KAPM08412-E
The bannertaglist.conf file does not exist.
[Action]
This message is displayed when no bannertaglist.conf file exists during processing to acquire a supported tag list.
Check that the following file exists:
Windows:
<HiCommand-installation-directory>\Base\conf\sec\bannertaglist.conf
Solaris: /opt/HiCommand/Base/conf/sec/bannertaglist.conf
Linux:
<HiCommand-installation-directory>/Base/conf/sec/bannertaglist.conf
-
KAPM08431-E
An attempt to register the security settings information has failed.
[Action]
When failing from security GUI screen to the security configuration registration will be displayed.
Perform the following procedure:
1. Confirm that the following folder exists:
In Windows: <HiCommand-installation-directory>\Base\conf\sec\resource
In Solaris: /opt/HiCommand/Base/conf/sec/resource
In Linux: <HiCommand-installation-directory>/Base/conf/sec/resource
2. Delete the following folder if it exists:
In Windows: <HiCommand-installation-directory>\Base\conf\sec\resource\security.conf
In Solaris: /opt/HiCommand/Base/conf/sec/resource/security.conf
In Linux: <HiCommand-installation-directory>/Base/conf/sec/resource/security.conf
3. Make sure that you have access permissions for the following file:
In Windows: <HiCommand-installation-directory>\Base\conf\sec\resource\security.conf
In Solaris: /opt/HiCommand/Base/conf/sec/resource/security.conf
In Linux: <HiCommand-installation-directory>/Base/conf/sec/resource/security.conf
4. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM08910-E
An exception occurred.
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08911-E
A fatal error occurred during processing.
[Action]
A fatal error occurred during processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08912-E
Null is specified for the argument.(aa...aa)
[Action]
Null is specified for the argument.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Arguments
-
KAPM08913-E
A value is invalid.(aa...aa, bb...bb)
[Action]
A value is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Key
bb...bb: Value
-
KAPM08914-E
The request is invalid.
[Action]
The request is invalid.
Logout, and then login again.
-
KAPM08915-E
There is an invalid statement in the configuration file of HBase Storage Mgmt Web Service.
[Action]
The settings or environment might be invalid. For example, the HBase Storage Mgmt Web Service configuration file might contain one or more invalid definitions.
Revise the httpsd.conf file as follows, and then restart all Hitachi Command Suite products, Single Sign On Server, and Common Web Service.
- Make sure that the Listen definitions for IPv4 non-SSL ports appear in the file before other Listen definitions.
- Make sure that the values specified for the Listen definitions of IPv4 non-SSL ports are valid.
-
KAPM08916-I
Succeeded in starting of service.
[Action]
A request to start the service was accepted.
-
KAPM08917-I
Succeeded in stopping of service.
[Action]
A request to stop the service was accepted.
-
KAPM08918-E
Failed to start service.
[Action]
An attempt to start the service has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08919-E
Failed to stop service.
[Action]
An attempt to stop the service has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08920-E
The value of hcmds.home cannot be acquired.
[Action]
The hcmds.home value cannot be acquired.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM08921-E
An attempt to acquire a value has failed.
[Action]
An attempt to acquire a value has failed.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM08922-E
Communication with the HBase Storage Mgmt Web Service failed.
[Action]
Confirmation of the connection with the HBase Storage Mgmt Web Service failed.
Start the HBase Storage Mgmt Web Service.
If the service stops immediately after being started, there might be a problem with the configuration file. Check and, if necessary, revise the httpsd.conf file.
In Windows, if there is a problem with the system PATH environment variable, the HBase Storage Mgmt Web Service might not start. Check and, if necessary, revise the PATH environment variable, and then restart the OS.
In addition, when you close a non-SSL port of the HBase Storage Mgmt Web Service, check the following configurations:
- Check that a host name, not an IP address, is specified in the ServerName directive of the httpsd.conf file.
- Check that the host name in the ServerName directive of the httpsd.conf file can be resolved to an IP address.
- Check that the host name specified in the ServerName directive of the httpsd.conf file is the same as the Common Name of the certificate specified in the SSLCertificateFile directive.
- Check that the certificate that is necessary to trust HBase Storage Mgmt Web Service has been correctly imported to the Hitachi Command Suite Common Component truststore (jssecacerts).
If the problem persists, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who might ask you to collect troubleshooting information.
-
KAPM08980-E
An attempt to acquire RequestDispatcher has failed.
[Action]
An attempt to acquire RequestDispatcher has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Jsp name
-
KAPM08999-E
aa...aa
[Action]
Detailed information for KAPMxxxxx-E. This indicates the thrown exception object and the backtrace for that object.
See the message KAPMxxxxx-E.
aa...aa: Name of the exception object and the reason that object was thrown, or the backtrace for that object
-
KAPM09062-E
An internal error occurred.
[Action]
An internal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM09064-E
No registered information exists.
[Action]
No registered information exists.
Register user information by using the set option, and then re-execute the command. If the same message is output again, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM09065-E
The file format is invalid.
[Action]
The file format is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM09066-E
An error occurred during file I/O processing.
[Action]
An error occurred during file I/O processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM09067-E
A server has not been registered.
[Action]
A server has not been registered.
Register user information by using the set option, and then re-execute the command. If the same message is output again, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM09068-E
An attempt to read a file has failed.
[Action]
An attempt to read a file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM09069-E
An attempt to output a file has failed.
[Action]
An attempt to output a file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM09070-E
An argument contains a null value.
[Action]
An argument contains a null value.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM09090-E
hcmds.home is not specified in the Java system properties.
[Action]
hcmds.home is not specified in the Java system properties.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM09091-E
An error occurred during reading of a library. library path = aa...aa
[Action]
An error occurred during reading of a library.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: library path
-
KAPM09092-E
A timeout was generated during lock acquisition.
[Action]
A timeout was generated during lock acquisition.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM09093-E
The acquisition of the lock has failed. error code = aa...aa
[Action]
The acquisition of the lock has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: error code
-
KAPM09094-E
The release of the lock has failed. error code = aa...aa
[Action]
The release of the lock has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM09100-I
Enter a value for the option. (option name = aa...aa)
[Action]
A value is not set for one or more command options.
aa...aa: Option name
-
KAPM09101-I
For confirmation, re-enter the value of the aa...aa option.
[Action]
The value of the specified option must be re-entered for confirmation.
aa...aa: Option name
-
KAPM09102-E
hcmds.home is not set in the Java system properties.
[Action]
hcmds.home is not set in the Java system properties.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM09103-E
An error occurred during the reading of the library. (library path = aa...aa)
[Action]
An error occurred during the reading of the library.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Library path
-
KAPM09104-E
The value entered the first time does not match the value entered the second time.
[Action]
The value entered the first time does not match the value entered the second time.
Enter valid values.
-
KAPM10009-E
The specified authorization group already exists. (distinguished name = aa...aa)
[Action]
The specified authorization group already exists.
Revise the name of the external authentication group.
aa...aa: distinguished-name
-
KAPM10011-E
Communication with the external authentication server has failed. (domain name = aa...aa)
[Action]
Communication with the external authentication server has failed.
Check the settings for the information search user, the settings of exauth.properties, and the operation of the external authentication server.
aa...aa: domain-name
-
KAPM10012-E
The information search user is not registered. (domain name = aa...aa)
[Action]
Authentication of the information search user has failed.
Register the information search user.
aa...aa: domain-name
-
KAPM10013-E
An attempt to search for the specified distinguished name has failed. (distinguished name = aa...aa)
[Action]
An attempt to search for the specified distinguished name has failed.
Confirm that the external authentication server is operating normally.
aa...aa: distinguished-name
-
KAPM10014-E
DNS communication with the external authentication server has failed. (domain name = aa...aa)
[Action]
DNS communication with the external authentication server has failed.
Revise the settings and IP address of the external authorization server.
aa...aa: domain-name
-
KAPM10015-E
The SRV record in the LDAP server is not registered. (distinguished name = aa...aa, domain name = bb...bb)
[Action]
The SRV record in the LDAP server is not registered.
Revise the SRV record settings for the LDAP server on DNS.
aa...aa: distinguished-name
bb...bb: domain-name
-
KAPM10016-E
A DNS error has occurred. (distinguished name = aa...aa, domain name = bb...bb)
[Action]
A DNS error has occurred.
Revise the DNS settings.
aa...aa: distinguished-name
bb...bb: domain-name
-
KAPM10017-W
The length of the specified distinguished name is invalid. (line number = aa...aa, distinguished name = bb...bb)
[Action]
The length of the specified distinguished name is invalid.
Revise the length of specified distinguished name.
aa...aa: line number
bb...bb: distinguished-name
-
KAPM10022-E
The SRV record of the Kerberos server is not registered in DNS. (distinguished name = aa...aa, domain name = bb...bb)
[Action]
The SRV record of the Kerberos server is not registered in DNS.
Revise the SRV record settings for the Kerberos server on DNS.
aa...aa: distinguished-name
bb...bb: domain-name
-
KAPM10029-E
The specified Distinguished Name cannot be found. (Distinguished Name = aa...aa)
[Action]
The specified Distinguished Name cannot be found.
Check that the Distinguished Name for the specified group is correct. If it is correct, confirm that the information search user has been granted the following permissions:
- Retrieval permission for the attribute to be retrieved
- Reference permission for Distinguished Names for groups
aa...aa: Distinguished Name
-
KAPM10030-W
The specified Distinguished Name already exists. (Distinguished Name = aa...aa)
[Action]
The specified Distinguished Name already exists.
Check that the specified Distinguished Name is correct.
aa...aa: Distinguished Name
-
KAPM10031-E
The specified Distinguished Name already exists in another domain. (Distinguished Name = aa...aa)
[Action]
The specified Distinguished Name already exists in another domain.
Check that the specified Distinguished Name is correct.
aa...aa: Distinguished Name
-
KAPM10032-E
The operation cannot proceed because the external authentication group linkage function is disabled.
[Action]
The operation cannot proceed because the external authentication group linkage function is disabled.
Enable the external authentication group linkage function.
-
KAPM10033-E
No groups that the user belongs to are registered. (user name = aa...aa)
[Action]
No groups that the user belongs to are registered.
Register a group that the user belongs to and that is on the external authentication server, and then grant the proper permissions to the group.
aa...aa: User name
-
KAPM10034-E
No groups that the user belongs to exist. (user name = aa...aa)
[Action]
No groups that the user belongs to exist.
Add the user to an appropriate group on the external authentication server.
aa...aa: User name
-
KAPM10035-E
The format of the specified Distinguished Name is invalid.(Distinguished Name = aa...aa)
[Action]
The format of the specified Distinguished Name is invalid.
Revise the format of the specified Distinguished Name.
aa...aa: Distinguished Name
-
KAPM10036-E
No information regarding the specified group was found.
[Action]
No information regarding the specified group was found.
Refresh the tree display, and then check whether there is any information on the specified group.
-
KAPM10037-I
Nest group information for the group. (group name = aa...aa)
[Action]
Nest group information for the group.
aa...aa: Group name
-
KAPM10038-I
Nest group: aa...aa
[Action]
Nest group information.
aa...aa: Nest group name
-
KAPM10039-W
The group was not found. (group name = aa...aa)
[Action]
The group was not found.
aa...aa: Group name
-
KAPM10040-E
The thread was interrupted.
[Action]
The thread was interrupted.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM10041-E
The installed version of JP1/Base is not supported.
[Action]
The installed version of JP1/Base is not supported.
Install JP1/Base 10-00 or later.
-
KAPM10042-E
JP1/Base initialization failed.
[Action]
JP1/Base initialization failed.
Verify that JP1/Base on the primary server is running properly. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
-
KAPM10043-E
An attempt to connect to JP1/Base failed.
[Action]
An attempt to connect to JP1/Base failed.
Verify that JP1/Base on the primary server is running properly. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
-
KAPM10044-E
Authentication of the JP1 token failed. (JP1 token = aa...aa)
[Action]
Authentication of the JP1 token failed.
To determine the cause and resolve the problem, detailed investigation is required. Contact the support center, who may ask you to collect troubleshooting information.
aa...aa: JP1 token
-
KAPM10045-E
An error occurred while linking to JP1/Base. (internal code = aa...aa)
[Action]
An error occurred while linking to JP1/Base.
Retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
aa...aa: Internal code
-
KAPM10046-E
An error occurred because the value is invalid. (value = aa...aa)
[Action]
An error occurred because the value is invalid.
Retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
aa...aa: Value
-
KAPM10047-E
An error occurred because the virtual host does not exist. (virtual host = aa...aa)
[Action]
An error occurred because the virtual host does not exist.
Verify that JP1/Base on the primary server is running properly. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
aa...aa: Virtual host
-
KAPM10048-E
An error occurred because the virtual host definition is invalid. (virtual host = aa...aa)
[Action]
An error occurred because the virtual host definition is invalid.
Verify that JP1/Base on the primary server is running properly. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
aa...aa: Virtual host
-
KAPM10049-W
The value is invalid. (value = aa...aa)
[Action]
The value is invalid.
aa...aa: Value
-
KAPM10050-E
Acquisition of the JP1/Base version failed.
[Action]
Acquisition of the JP1/Base version failed.
Verify that JP1/Base on the primary server is running properly. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
-
KAPM10051-W
Valid suite product permissions were not allocated to the JP1 resource group. (JP1 resource group = aa...aa)
[Action]
Valid suite product permissions were not allocated to the JP1 resource group.
aa...aa: JP1 resource group
-
KAPM10052-E
Acquisition of the table failed. (table = aa...aa)
[Action]
Acquisition of the table failed.
Verify that the DBMS, the HBase Storage Mgmt Web Service, and the HBase Storage Mgmt Common Service are running. If they are running, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
aa...aa: Table name
-
KAPM10053-E
No authentication server is set up.
[Action]
No authentication server is set up.
Verify that JP1/Base on the primary server is running properly. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
-
KAPM10054-E
Permissions are not assigned to the user. (user name = aa...aa)
[Action]
Permissions are not assigned to the user.
Assign suite product permissions to the user from JP1/Base.
aa...aa: User name
-
KAPM10055-E
Suite product permissions are not assigned to the user. (user name = aa...aa)
[Action]
Suite product permissions are not assigned to the user.
Assign suite product permissions to the user from JP1/Base.
aa...aa: User name
-
KAPM10056-E
A buffer error occurred.
[Action]
A buffer error occurred.
Retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
-
KAPM10057-W
The format of the value is invalid. (value = aa...aa)
[Action]
The format of the value is invalid.
aa...aa: Value
-
KAPM10058-W
The permissions do not correspond to the suite product permissions. (permissions = aa...aa)
[Action]
The permissions do not correspond to the suite product permissions.
aa...aa: Permissions
-
KAPM10059-W
The permissions could not be converted to suite product permissions. (permissions = aa...aa)
[Action]
The permissions could not be converted to suite product permissions.
aa...aa: Permissions
-
KAPM10060-E
Loading of the library failed. (library = aa...aa)
[Action]
Loading of the library failed.
Verify that JP1/Base 10-00 or later is installed on the primary server.
aa...aa: Library
-
KAPM10061-E
hcmds.home is not set in the Java system properties.
[Action]
hcmds.home is not set in the Java system properties.
To determine the cause and resolve the problem, detailed investigation is required. Contact the support center, who may ask you to collect troubleshooting information.
-
KAPM10062-E
Acquisition of user permission information from JP1/Base failed.
[Action]
Acquisition of user permission information from JP1/Base failed.
Perform the following:
- Verify that permissions are assigned to the user from JP1/Base.
- Verify that JP1/Base on the primary server is running properly.
If the problem persists, acquire the maintenance information, and then contact the support center.
-
KAPM10063-E
Preprocessing failed.
[Action]
Preprocessing failed.
Perform the following:
- Verify that JP1/Base 10-00 or later is installed on the primary server.
- Verify that hcmds.home is set in the Java system properties.
-
KAPM10064-E
JP1/Base initialization failed.
[Action]
JP1/Base initialization failed.
Verify that JP1/Base on the primary server is running properly. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
-
KAPM10065-E
Authentication of the JP1 token failed. (JP1 token = aa...aa)
[Action]
Authentication of the JP1 token failed.
To determine the cause and resolve the problem, detailed investigation is required. Contact the support center, who may ask you to collect troubleshooting information.
aa...aa: JP1 token
-
KAPM10066-I
The external authentication server successfully authenticated the information. (user name = aa...aa, protocol = bb...bb)
[Action]
The external authentication server successfully authenticated the information.
aa...aa: User name
bb...bb: Protocol
-
KAPM10067-I
User permission information was successfully acquired from JP1/Base. (user name = aa...aa)
[Action]
User permission information was successfully acquired from JP1/Base.
aa...aa: User name
-
KAPM10100-E
Authentication was canceled because a search user has not been registered. (domain name = aa...aa, host = bb...bb, port = cc...cc, protocol = dd...dd)
[Action]
Authentication was canceled because the search user has not been registered.
Make sure the search user has been registered.
aa...aa: Domain name
bb...bb: Host
cc...cc: Port
dd...dd: Protocol
-
KAPM10101-E
Authentication was canceled because a setting in the configuration file for the external authentication server (exauth.properties) is invalid.
[Action]
Authentication was canceled because a setting in the configuration file for the external authentication server (exauth.properties) is invalid.
Revise the settings in the configuration file for the external authentication server (exauth.properties).
-
KAPM10102-I
The group information was acquired from the LDAP server. (domain name = aa...aa, host = bb...bb, port = cc...cc, protocol = dd...dd, basedn = ee...ee)
[Action]
The group information was acquired from an LDAP server.
aa...aa: Domain name
bb...bb: Host
cc...cc: Port
dd...dd: Protocol
ee...ee: BaseDN
-
KAPM10103-E
Acquisition of group information failed. (userId = aa...aa, domain name = bb...bb, host = cc...cc, port = dd...dd, protocol = ee...ee, basedn = ff...ff)
[Action]
Acquisition of group information has failed.
Revise the settings in the configuration file for the external authentication server (exauth.properties).
aa...aa: User ID
bb...bb: Domain name
cc...cc: Host
dd...dd: Port
ee...ee: Protocol
ff...ff: BaseDN
-
KAPM10104-E
Confirmation of the existence of a group failed because a setting in the configuration file for the external authentication server (exauth.properties) is invalid or a search user setting is invalid.
[Action]
Confirmation of the existence of a group failed because a setting in the configuration file for the external authentication server (exauth.properties) is invalid or a search user setting is invalid.
Revise the settings in the configuration file for the external authentication server (exauth.properties) and the search user settings.
-
KAPM10105-E
A search user has not been registered. (domain name = aa...aa)
[Action]
The search user has not been registered.
Make sure the search user has been registered.
aa...aa: Domain name
-
KAPM10106-I
The existence of a group was successfully confirmed. (groupDN = aa...aa, domain name = bb...bb, host = cc...cc, port = dd...dd, protocol = ee...ee)
[Action]
The existence of a group was successfully confirmed.
aa...aa: GroupDN
bb...bb: Domain name
cc...cc: Host
dd...dd: Port
ee...ee: Protocol
-
KAPM10112-I
Authentication by a search user was successful. (host=aa...aa, port=bb...bb,protocol=cc...cc)
[Action]
Authentication by a search user was successful.
aa...aa: Host
bb...bb: Port
cc...cc: Protocol
-
KAPM10114-E
Authentication stopped because a setting in the configuration file for the external authentication server (exauth.properties) or a search user setting is invalid.
[Action]
Authentication stopped because a setting in the configuration file for the external authentication server (exauth.properties) or a search user setting is invalid.
Revise the exauth.properties file or the search user definition.
-
KAPM10115-E
The Kerberos realm, KDC, or a search user definition is invalid. (realm name = aa...aa)
[Action]
The Kerberos realm, KDC, or a search user definition is invalid.
Check and, if necessary, revise the exauth.properties file realm, the KDC or a search user definition.
aa...aa: realm-name
-
KAPM10116-I
Communication with the directory server was successfully established. (host = aa...aa, port = bb...bb, protocol = cc...cc)
[Action]
Information output to the audit log indicating that communication with the directory server was successfully established.
aa...aa: Host name
bb...bb: Port number
cc...cc: Protocol
-
KAPM10117-E
Communication with the directory server failed to be established. (host = aa...aa, port = bb...bb, protocol = cc...cc)
[Action]
Information output to the audit log indicating that communication with the directory server failed to be established.
aa...aa: Host name
bb...bb: Port number
cc...cc: Protocol
-
KAPM10118-I
Communication with the RADIUS server was successfully established. (host = aa...aa, port = bb...bb, protocol = cc...cc)
[Action]
Information output to the audit log indicating that communication with the RADIUS server was successfully established.
aa...aa: Host name
bb...bb: Port number
cc...cc: Protocol
-
KAPM10119-E
Communication with the RADIUS server failed to be established. (host = aa...aa, port = bb...bb, protocol = cc...cc)
[Action]
Information output to the audit log indicating that communication with the RADIUS server failed to be established.
aa...aa: Host name
bb...bb: Port number
cc...cc: Protocol
-
KAPM10120-I
Communication with the Kerberos server was successfully established. (KDC = aa...aa)
[Action]
Information output to the audit log indicating that communication with the Kerberos server was successfully established.
aa...aa: KDC
-
KAPM10121-E
Communication with the Kerberos server failed to be established. (KDC = aa...aa)
[Action]
Information output to the audit log indicating that communication with the Kerberos server failed to be established.
aa...aa: KDC
-
KAPM10122-I
Communication with the DNS server was successfully established.
[Action]
Information output to the audit log indicating that communication with the DNS server was successfully established.
-
KAPM10123-E
Communication with the DNS server failed to be established.
[Action]
Information output to the audit log indicating that communication with the DNS server failed to be established.
-
KAPM10124-I
A TLS session with a directory server was successfully negotiated. (host = aa...aa, port = bb...bb, protocol = cc...cc)
[Action]
Information output to the audit log indicating that a TLS session with a directory server was successfully negotiated.
aa...aa: Host name
bb...bb: Port number
cc...cc: Protocol
-
KAPM10125-E
A TLS session with a directory server failed to be negotiated. (host = aa...aa, port = bb...bb, protocol = cc...cc)
[Action]
Information output to the audit log indicating that a TLS session with a directory server failed to be negotiated.
aa...aa: Host name
bb...bb: Port number
cc...cc: Protocol
-
KAPM10126-I
An information-search user was successfully authenticated by the directory server. (distinguished name = aa...aa, host = bb...bb, port = cc...cc, protocol = dd...dd)
[Action]
Information output to the audit log indicating that an information-search user was successfully authenticated by the directory server.
aa...aa: Distinguished name
bb...bb: Host name
cc...cc: Port number
dd...dd: Protocol
-
KAPM10127-W
An information-search user failed to be authenticated by the directory server. (distinguished name = aa...aa, host = bb...bb, port = cc...cc, protocol = dd...dd)
[Action]
Information output to the audit log indicating that an information-search user failed to be authenticated by the directory server.
aa...aa: Distinguished name
bb...bb: Host name
cc...cc: Port number
dd...dd: Protocol
-
KAPM10128-I
A user was successfully authenticated by the directory server. (user ID = aa...aa, host = bb...bb, port = cc...cc, protocol = dd...dd)
[Action]
Information output to the audit log indicating that a user was successfully authenticated by the directory server.
aa...aa: User ID
bb...bb: Host name
cc...cc: Port number
dd...dd: Protocol
-
KAPM10129-W
No users are registered on the directory server. (user ID = aa...aa, host = bb...bb, port = cc...cc, protocol = dd...dd)
[Action]
Information output to the audit log indicating that no users are registered on the directory server.
aa...aa: User ID
bb...bb: Host name
cc...cc: Port number
dd...dd: Protocol
-
KAPM10130-W
A user failed to be authenticated by the directory server. (user ID = aa...aa, host = bb...bb, port = cc...cc, protocol = dd...dd)
[Action]
Information output to the audit log indicating that a user failed to be authenticated by the directory server.
aa...aa: User ID
bb...bb: Host name
cc...cc: Port number
dd...dd: Protocol
-
KAPM10131-I
A user was successfully authenticated by the RADIUS server. (user ID = aa...aa, host = bb...bb, port = cc...cc, protocol = dd...dd)
[Action]
Information output to the audit log indicating that a user was successfully authenticated by the RADIUS server.
aa...aa: User ID
bb...bb: Host name
cc...cc: Port number
dd...dd: Protocol
-
KAPM10132-W
A user failed to be authenticated by the RADIUS server. (user ID = aa...aa, host = bb...bb, port = cc...cc, protocol = dd...dd)
[Action]
Information output to the audit log indicating that a user failed to be authenticated by the RADIUS server.
aa...aa: User ID
bb...bb: Host name
cc...cc: Port number
dd...dd: Protocol
-
KAPM10133-I
A user was successfully authenticated by the Kerberos server. (Kerberos principal = aa...aa, KDC = bb...bb)
[Action]
Information output to the audit log indicating that a user was successfully authenticated by the Kerberos server.
aa...aa: Kerberos principal name
bb...bb: KDC
-
KAPM10134-W
A user failed to be authenticated by the Kerberos server. (Kerberos principal = aa...aa, KDC = bb...bb)
[Action]
Information output to the audit log indicating that a user failed to be authenticated by the Kerberos server.
aa...aa: Kerberos principal name
bb...bb: KDC
-
KAPM10135-I
User information was successfully acquired from the directory server. (user ID = aa...aa, domain name = bb...bb, host = cc...cc, port = dd...dd, protocol = ee...ee, base DN = ff...ff)
[Action]
The audit log indicates that user information was successfully acquired from the directory server.
aa...aa: User ID
bb...bb: Domain name
cc...cc: Host name
dd...dd: Port number
ee...ee: Protocol
ff...ff: Base DN
-
KAPM10136-E
Acquisition of user information from the directory server failed. (user ID = aa...aa, domain name = bb...bb, host = cc...cc, port = dd...dd, protocol = ee...ee, base DN = ff...ff)
[Action]
The audit log indicates that an attempt to acquire user information from the directory server failed.
aa...aa: User ID
bb...bb: Domain name
cc...cc: Host name
dd...dd: Port number
ee...ee: Protocol
ff...ff: Base DN
-
KAPM10137-I
An SRV record was successfully acquired from the DNS server. (record key = aa...aa)
[Action]
Information output to the audit log indicating that an SRV record was successfully acquired from the DNS server.
aa...aa: SRV record key
-
KAPM10138-E
An SRV record failed to be acquired from the DNS server. (record key = aa...aa)
[Action]
Information output to the audit log indicating that an SRV record failed to be acquired from the DNS server.
aa...aa: SRV record key
-
KAPM10139-I
JP1/Base was successfully connected to.
[Action]
This audit log entry reports that JP1/Base was successfully connected to.
-
KAPM10140-E
An attempt to connect to JP1/Base failed.
[Action]
This audit log entry reports that an attempt to connect to JP1/Base failed.
-
KAPM10141-I
User authentication in JP1/Base was successful. (aa...aa = bb...bb)
[Action]
This audit log entry reports that user authentication in JP1/Base was successful.
aa...aa: Key
bb...bb: Value
-
KAPM10142-W
JP1/Base user authentication failed. (aa...aa = bb...bb)
[Action]
This audit log entry reports that JP1/Base user authentication failed.
aa...aa: Key
bb...bb: Value
-
KAPM10143-I
JP1/Base was successfully logged out from. (JP1 token = aa…aa)
[Action]
This audit log entry reports that JP1/Base was successfully logged out from.
aa...aa: JP1 token
-
KAPM10144-I
User permission information was successfully acquired from JP1/Base. (user name = aa...aa)
[Action]
This audit log entry reports that user permission information was successfully acquired from JP1/Base.
aa...aa: User name
-
KAPM10145-E
Acquisition of user permission information from JP1/Base failed. (user name = aa...aa)
[Action]
This audit log entry reports that acquisition of user permission information from JP1/Base failed.
aa...aa: User name
-
KAPM10146-I
JP1/Base was successfully initialized.
[Action]
This audit log entry reports that JP1/Base was successfully initialized.
-
KAPM10147-E
JP1/Base initialization failed.
[Action]
This audit log entry reports that JP1/Base initialization failed.
-
KAPM10148-I
The JP1/Base version was successfully acquired.
[Action]
This audit log entry reports that the JP1/Base version was successfully acquired.
-
KAPM10149-E
Acquisition of the JP1/Base version failed.
[Action]
This audit log entry reports that the acquisition of the JP1/Base version failed.
-
KAPM14000-E
An exception occurred.
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM14003-I
Command execution started.
[Action]
Command execution started.
-
KAPM14004-I
The command was executed successfully.
[Action]
The command was executed successfully.
-
KAPM14005-E
Command execution failed.
[Action]
Command execution failed.
See the message KAPMxxxxx-E.
-
KAPM14006-E
An option is invalid.
[Action]
An option is invalid.
Check and, if necessary, revise the specified options.
-
KAPM14007-E
The command cannot be executed because the database is down.
[Action]
The command cannot be executed because the database is down.
Make sure of the following, and then retry the command:
- Make sure that HiRDB is running.
- Make sure that HiRDB has been set up.
-
KAPM14008-E
Command execution failed. (command name = aa...aa)
[Action]
Command execution failed.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: command name
-
KAPM14009-E
An attempt to read a file failed. (file name = aa...aa)
[Action]
An attempt to read a file failed.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: file name
-
KAPM14010-E
Table information could not be acquired. (table name = aa...aa)
[Action]
Table information could not be acquired.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: table name
-
KAPM14011-W
A key is invalid. (key name = aa...aa)
[Action]
A key is invalid.
aa...aa: key name
-
KAPM14012-I
Association information will be deleted because the chain was broken. (hcmdsID = aa...aa, association = bb...bb)
[Action]
Association information will be deleted because the chain was broken.
aa...aa: hcmdsID
bb...bb: association
-
KAPM14013-I
Incorrect product information will be removed. (product name = aa...aa)
[Action]
Incorrect product information will be removed.
aa...aa: product name
-
KAPM14014-E
The value of hcmds.home could not be acquired.
[Action]
The value of hcmds.home could not be acquired.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM14015-E
An attempt to delete the product information has failed. (product name = aa...aa)
[Action]
An attempt to delete the product information has failed.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: product name
-
KAPM14016-E
An attempt to delete the association information has failed. (association = aa...aa)
[Action]
An attempt to delete the association information has failed.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: association
-
KAPM14017-E
The DBMS is blocked.
[Action]
The DBMS is blocked.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM14018-E
An attempt to get association information failed.
[Action]
An attempt to get association information failed.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM14019-E
An attempt to get the class name failed.
[Action]
An attempt to get the class name failed.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM14020-W
Processing is being re-executed.
[Action]
Processing is being re-executed.
-
KAPM14021-E
An authentication error occurred.
[Action]
An authentication error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM14022-E
An error occurred during DBMS access processing.
[Action]
An error occurred during DBMS access processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15002-I
The hcmdscheckauth command will now start.
[Action]
The hcmdscheckauth command will now start.
-
KAPM15003-I
The configuration check of aa...aa will now start.
[Action]
The configuration check will now start.
aa...aa: Phase number
-
KAPM15004-I
The result of the configuration check of aa...aa was normal.
[Action]
The result of the configuration check was normal.
aa...aa: Phase number
-
KAPM15005-E
The result of the configuration check of aa...aa was abnormal.
[Action]
The result of the configuration check was abnormal.
See the immediately preceding message KAPMxxxxx-E.
aa...aa: Phase number
-
KAPM15006-I
The configuration of the server aa...aa will now be checked.
[Action]
The configuration of the server will now be checked.
aa...aa: Server name
-
KAPM15007-I
The result of the configuration check of the server aa...aa was normal.
[Action]
The result of the configuration check of the server was normal.
aa...aa: Server name
-
KAPM15008-E
The result of the configuration check of the server aa...aa was abnormal.
[Action]
The result of the configuration check of the server was abnormal.
See the immediately preceding message KAPMxxxxx-E.
aa...aa: Server name
-
KAPM15009-I
The configuration check of aa...aa has finished normally.
[Action]
The configuration check has finished normally.
aa...aa: Phase number
-
KAPM15010-I
The connection to the server aa...aa will now be checked. (host = bb...bb, port = cc...cc, protocol = dd...dd)
[Action]
The connection to the server will now be checked.
aa...aa: Server name
bb...bb: Host name
cc...cc: Port number
dd...dd: Protocol
-
KAPM15011-I
The server aa...aa can be connected to normally.
[Action]
The connection to the server has been checked successfully.
aa...aa: Server name
-
KAPM15012-E
The result of checking the connection to the server aa...aa indicated an error.
[Action]
An attempt to check the connection to the server has failed.
Refer to error message KAPM15010-I and the related messages that follow it.
aa...aa: Server name
-
KAPM15013-E
A connection error occurred.
[Action]
A connection error occurred.
Make sure that the external authentication server is running correctly, and then perform one of the following procedures:
For LDAP:
If the KAPM15084-E message is displayed after this message, it shows the details of the LDAP connection error. Refer to the following to resolve the problem:
1. Make sure that the host or IP address, port, and protocol specified in exauth.properties are correct.
2. Make sure that the network is correctly connected.
3. Check the firewall settings.
4. Make sure that the LDAP directory server is compatible with the LDAPv3 protocol.
5. If StartTLS is used, check the SSL settings. For StartTLS, specify the host, not the IP address.
6. If an OCSP is enabled, check the following:
- Make sure that the certificate is valid.
7. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
For RADIUS:
1. Make sure that the host or IP address, port, and protocol specified in exauth.properties are correct.
2. Check and then respecify the client secret set for the external authentication server and the secret set for the client.
3. Make sure that the network is correctly connected.
4. Check the firewall settings.
5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15014-E
An authentication error occurred.
[Action]
An authentication error occurred.
Make sure that the user who made the specification is registered in the external authentication server.
-
KAPM15015-I
The command hcmdscheckauth will now finish.
[Action]
The command hcmdscheckauth will now finish.
-
KAPM15016-E
A file was not found. (file name = aa...aa)
[Action]
A file was not found.
Make sure that the file exists in the specified folder.
aa...aa: File name
-
KAPM15017-E
A file could not be read. (file name = aa...aa)
[Action]
A file could not be read.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM15018-E
The settings of the external authentication server are invalid.
[Action]
The settings of the external authentication server are invalid.
Check and revise the configuration file, specifying valid settings for the external authentication server.
-
KAPM15019-E
The configuration file contains a syntax error. (line number = aa...aa, value = bb...bb)
[Action]
The configuration file contains a syntax error.
The value bb...bb on line aa...aa caused a syntax error. Check and, if necessary, revise the configuration file, and then retry the operation.
aa...aa: Line number
bb...bb: Value
-
KAPM15020-E
The same property key already exists. (line number = aa...aa, key = bb...bb)
[Action]
The same property key already exists.
The key bb...bb on line aa...aa is a duplicate. Check and, if necessary, revise the configuration file, and then retry the operation.
aa...aa: Line number
bb...bb: Key
-
KAPM15021-E
A required parameter has not been specified. (key = aa...aa)
[Action]
A required parameter has not been specified.
Specify all required parameters, and then retry the operation.
aa...aa: Key
-
KAPM15022-W
An optional parameter has been omitted. (value = aa...aa)
[Action]
An optional parameter has been omitted. (value = aa...aa)
aa...aa: Value
-
KAPM15023-W
A property key cannot be identified. (line number = aa...aa)
[Action]
A property key cannot be identified.
Check and, if necessary, review the settings in the configuration file for the external authentication server.
aa...aa: Line number
-
KAPM15024-E
A secret does not exist.
[Action]
A secret does not exist.
Specify a secret, and then retry the operation.
-
KAPM15025-E
No connection could be made from the secondary server.
[Action]
No connection could be made from the secondary server.
Connect from the primary server.
-
KAPM15026-E
A fatal error occurred during processing.
[Action]
A fatal error occurred during processing.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15027-E
An option is invalid.
[Action]
An option is invalid.
Check and, if necessary, revise the specified options.
-
KAPM15028-E
No value has been specified for an option.
[Action]
No value has been specified for an option.
Specify all required options.
-
KAPM15029-E
The value of hcmds.home could not be acquired.
[Action]
The value of hcmds.home could not be acquired.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15030-I
Processing has finished normally.
[Action]
Processing has finished normally.
-
KAPM15031-E
An exception occurred.
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15032-E
The configuration file was not found. (file name = aa...aa)
[Action]
The configuration file was not found.
Confirm that the file exists, that the file is not in use,
aa...aa: File name
-
KAPM15033-E
An error occurred on the aa...aa server.
[Action]
A server error occurred.
Perform one of the following procedures:
For LDAP:
1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network.
2. Use the hcmdsldapuser command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
3. If StartTLS is used, check the SSL settings.
4. If an OCSP is enabled, make sure that the certificate is valid.
5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
For RADIUS:
1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network.
2. Use the hcmdsradiussecret command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
3. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Server name
-
KAPM15034-E
Authentication information cannot be acquired. (server name = aa...aa)
[Action]
Authentication information cannot be acquired.
Use the hcmdsldapuser command or the hcmdsradiussecret command to reconfigure the authentication information. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: server name
-
KAPM15035-I
Authentication information has been acquired.
[Action]
Authentication information has been acquired.
-
KAPM15036-E
Authentication information cannot be acquired.
[Action]
Authentication information cannot be acquired.
Use the hcmdsldapuser command or the hcmdsradiussecret command to reconfigure the authentication information. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15037-E
Specify a value for at least one key. (key = aa...aa)
[Action]
Specify a value for at least one key.
Specify key values, and then retry the operation.
aa...aa: Key
-
KAPM15039-I
A connection was successfully established. (server name = aa...aa)
[Action]
A connection was successfully established.
aa...aa: Server name
-
KAPM15040-E
A connection attempt has failed. (server name = aa...aa)
[Action]
A connection attempt has failed.
Make sure that the external authentication server is running correctly, and then perform one of the following procedures:
For LDAP:
1. Make sure that the host or IP address, port, and protocol specified in exauth.properties are correct.
2. Make sure that the network is correctly connected.
3. Check the firewall settings.
4. Make sure that the LDAP directory server is compatible with the LDAPv3 protocol.
5. If StartTLS is used, check the SSL settings. For StartTLS, specify the host, not the IP address.
6. If an OCSP is enabled, check the following:
- Make sure that the certificate is valid.
7. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
For RADIUS:
1. Make sure that the host or IP address, port, and protocol specified in exauth.properties are correct.
2. Check and then respecify the client secret set for the external authentication server and the secret set for the client.
3. Make sure that the network is correctly connected.
4. Check the firewall settings.
5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Server name
-
KAPM15041-E
Authentication has failed. (server name = aa...aa)
[Action]
Authentication has failed.
See the KAPMxxxxx-E message of the server aa...aa, above.
aa...aa: Server name
-
KAPM15042-E
A syntax error occurred. (server name = aa...aa)
[Action]
A syntax error occurred.
See the KAPMxxxxx-E message of the server aa...aa, above.
aa...aa: Server name
-
KAPM15043-E
A check cannot be performed because the external authentication server type is unknown.
[Action]
A check cannot be performed because the external authentication server type is unknown.
If necessary, revise the value of auth.server.type, and then retry the operation.
-
KAPM15044-E
A check cannot be performed because the server identification name is unknown.
[Action]
A check cannot be performed because the server identification name is unknown.
If necessary, revise the value of auth.server.name, and then retry the operation.
-
KAPM15045-E
A parameter has not been specified. (key = aa...aa)
[Action]
The value for a parameter has not been specified.
Specify the value of the parameter aa...aa, and then retry the operation.
aa...aa: Key
-
KAPM15046-E
An invalid value has been specified for a parameter. (key = aa...aa)
[Action]
An invalid value has been specified for a parameter.
If necessary, revise the value of the parameter aa...aa, and then retry the operation.
aa...aa: Key
-
KAPM15047-I
The authentication method will now be internal authentication.
[Action]
The authentication method will now be internal authentication.
-
KAPM15049-E
The configuration file could not be accessed. (File name = aa...aa)
[Action]
The configuration file could not be accessed.
Make sure that the configuration file exists, that you have access permissions for this file, and that the file is not in use.
aa...aa: File name
-
KAPM15050-E
Authentication of the user account used for information searching has failed.
[Action]
Authentication of the user account used for information searching failed.
Perform one of the following procedures:
If the message KAPM15084-E is displayed after this message, the message KAPM15084-E shows the details of the LDAP connection error. Please refer to the following and correct the problem:
For LDAP hierarchical structure model:
- Make sure the DN and the password of the user who is used for searching for information are correct, and then re-execute the hcmdsldapuser command.
For LDAP flat model:
- Using the hcmdsldapuser command, confirm that the information for the server name specified to the auth.server.name attribute of exauth.properties is not registered.
-
KAPM15051-E
The DN of the user account used for information searching was not found.
[Action]
The DN of the user account used for information searching was not found.
Perform one of the following procedures:
If the message KAPM15084-E is displayed after this message, the message KAPM15084-E shows the details of the LDAP connection error. Please refer to the following and correct the problem:
For LDAP hierarchical structure model:
- Make sure the DN of the user account used for information searching is correct, and then re-execute the command hcmdsldapuser.
For LDAP flat model:
- Using the hcmdsldapuser command, confirm that the information for the server name specified to the auth.server.name attribute of exauth.properties is not registered.
-
KAPM15052-E
Authentication of the specified user has failed.
[Action]
Authentication of the specified user failed.
Perform one of the following procedures:
For LDAP:
If the KAPM15084-E message is displayed after this message, it shows the details of the LDAP connection error. Refer to the following to resolve the problem:
1. Make sure that the user is specified correctly. The user must be specified using only the user name, not the DN format.
2. Make sure that the password for the specified user is correct.
3. Make sure that the specified user is registered in the external authentication server and is enabled.
4. Check and, if necessary, revise the values of basedn and attr in exauth.properties for the corresponding server.
5. If an LDAP hierarchical structure model is used, do the following:
- Use the hcmdsldapuser command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
- Make sure that the user account used for information searching has the necessary permissions.
6. If an LDAP flat model is used, use the hcmdsldapuser command to confirm that the information for the server name specified for the auth.server.name attribute of exauth.properties is not registered.
7. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
For RADIUS:
1. Make sure that the user is specified correctly.
2. Make sure that the password for the specified user is correct.
3. Make sure that the specified user is registered in the external authentication server and is enabled.
4. Make sure that the PAP and CHAP settings are valid.
5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15053-E
The specified user was not found.
[Action]
The specified user was not found.
Perform one of the following procedures:
If the KAPM15084-E message is displayed after this message, it shows the details of the LDAP connection error. Refer to the following to resolve the problem:
1. Make sure that the user is specified correctly. The user must be specified using only the user name, not the DN format.
2. Make sure that the specified user is registered in the external authentication server and is enabled.
3. Check and, if necessary, revise the values of basedn and attr in exauth.properties for the corresponding server.
4. If an LDAP hierarchical structure model is used, do the following:
- Use the hcmdsldapuser command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
- Make sure that the user account used for information searching has the necessary permissions.
5. If an LDAP flat model is used, use the hcmdsldapuser command to confirm that the information for the server name specified for the auth.server.name attribute of exauth.properties is not registered.
6. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15054-E
The specified user was not found. (error code = aa...aa)
[Action]
The specified user was not found.
Perform one of the following procedures:
If the KAPM15084-E message is displayed after this message, it shows the details of the LDAP connection error. Refer to the following to resolve the problem:
1. Make sure that the user is specified correctly. The user must be specified using only the user name, not the DN format.
2. Make sure that the specified user is registered in the external authentication server and is enabled.
3. Check and, if necessary, revise the values of basedn and attr in exauth.properties for the corresponding server.
4. If an LDAP hierarchical structure model is used, do the following:
- Use the hcmdsldapuser command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
- Make sure that the user account used for information searching has the necessary permissions.
5. If an LDAP flat model is used, use the hcmdsldapuser command to confirm that the information for the server name specified for the auth.server.name attribute of exauth.properties is not registered.
6. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: error code
-
KAPM15056-E
The specified user was not found.
[Action]
The specified user was not found.
Perform the following:
1. Make sure that the specified user is registered in the external authentication server.
2. Check, and if necessary, revise the basedn and attr values for the corresponding server in exauth.properties.
3. If an LDAP hierarchical structure model is used, check the following:
- Using the hcmdsldapuser command, confirm that the information for the server name specified to the auth.server.name attribute of exauth.properties is registered.
- Make sure the user who is used for searching for information has the correct permissions.
-
KAPM15057-E
A dn value is invalid.
[Action]
A dn value is invalid.
Perform the following:
1.Check, and if necessary, revise the basedn value for the corresponding server in the file exauth.properties.
2.If you use the hcmdsldapuser command to register the information for the server specified for the attribute auth.server.name in the file exauth.properties make sure you specify a valid value for the dn option.
-
KAPM15058-I
The message outputs LDAP connection information. (aa...aa = bb...bb, aa...aa = bb...bb, ......)
[Action]
The message outputs LDAP connection information.
aa...aa: Key
bb...bb: Value
-
KAPM15059-E
aa...aa
[Action]
This message displays details of the previous error message.
Take action according to the preceding message.
aa...aa: error code details
-
KAPM15060-I
The file targeted for generation management was successfully saved.
[Action]
The file specified by the command was saved successfully.
-
KAPM15061-E
No file targeted for generation management exists.
[Action]
The file specified by the command does not exist.
Correctly specify the path to the file to be saved.
-
KAPM15062-E
There is not enough free space to save the file.
[Action]
There is not enough free space where the file is to be saved.
Secure enough disk space where the file is to be saved, and then re-execute the command.
If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15063-E
The specified management target is a directory.
[Action]
A directory was specified for the argument of the option that specifies the file.
Specify the absolute path to the file to be saved.
-
KAPM15064-E
The permissions for the file to be managed are invalid.
[Action]
The permissions for the file specified by the command are invalid.
Make sure that you have permissions for the specified file, and then re-execute the command.
If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15065-E
An attempt to store the managed file has failed.
[Action]
An attempt to save the specified file has failed.
Check the permissions and location for the specified file, and then re-execute the command. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15066-W
The specified number of generations exceeds the maximum (99).
[Action]
The value of the option that specifies the number of generations exceeds the maximum.
Specify a value from 2 to 98 for the number of generations.
-
KAPM15067-E
Creation of the directory has failed.
[Action]
Creation of the directory has failed.
Make sure that the location of the directory in which the specified file is to be saved is correct, and then re-execute the command.
If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15068-E
An option is invalid.
[Action]
An option is invalid.
Specify valid options.
-
KAPM15069-E
A fatal error occurred.
[Action]
A fatal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15070-I
The hcmdsfilerotate command has started.
[Action]
The hcmdsfilerotate command has started.
-
KAPM15071-I
The hcmdsfilerotate command has ended.
[Action]
The hcmdsfilerotate command has ended.
-
KAPM15072-I
A file whose file number is 99 has been overwritten.
[Action]
If the hcmdsfilerotate command executes 99 times or more within one second, all copied files whose file number was equal to or more than 99 (which is the maximum file number) will be saved with the file number "99".
-
KAPM15073-W
The command log cannot be output.
[Action]
The command log cannot be output because an environment variable needed for the output is invalid.
Revise the environment variables set for outputting command log information.
If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15074-E
The value specified for an option is invalid.
[Action]
This message indicates that the value specified for an option is invalid.
Revise the values specified for the options.
-
KAPM15080-E
Authentication of the user account used for information searching has failed. (server name = aa...aa)
[Action]
Authentication of the user account used for information searching failed.
Perform one of the following procedures:
For LDAP hierarchical structure model:
- Make sure the DN and the password of the user who is used for searching for information are correct, and then re-execute the hcmdsldapuser command.
For LDAP flat model:
- Using the hcmdsldapuser command, confirm that the information for the server name specified to the auth.server.name attribute of exauth.properties is not registered.
aa...aa: server name
-
KAPM15081-E
The DN of the user account used for information searching was not found. (server name = aa...aa)
[Action]
The DN of the user account used for information searching was not found.
Perform one of the following procedures:
For LDAP hierarchical structure model:
- Make sure the DN of the user account used for information searching is correct, and then re-execute the command hcmdsldapuser.
For LDAP flat model:
- Using the hcmdsldapuser command, confirm that the information for the server name specified to the auth.server.name attribute of exauth.properties is not registered.
aa...aa: server name
-
KAPM15082-E
Authentication of the specified user has failed. (server name = aa...aa)
[Action]
Authentication of the specified user failed.
Perform one of the following procedures for LDAP:
1. Make sure the user is specified correctly. The user must be specified using only the user name, not the DN format.
2. Make sure the password for the specified user is correct.
3. Make sure the specified user is registered on the external authentication server and is enabled.
4. Check, and if necessary, revise the values of basedn and attr for the corresponding server in exauth.properties.
5. If an LDAP hierarchical structure model is used, check the following:
- Using the hcmdsldapuser command, confirm that the information for the server name specified to the auth.server.name attribute of exauth.properties is registered.
- Make sure the user who is used for searching for information has the correct permissions.
6. If an LDAP flat model is used, check the following:
- Using the hcmdsldapuser command, confirm that the information for the server name specified to the auth.server.name attribute of exauth.properties is not registered.
7. If this does not resolve the problem, acquire the maintenance information, and then contact the Support Center.
For RADIUS:
1. Make sure the user is specified correctly.
2. Make sure the password of the specified user is specified correctly.
3. Make sure the specified user is registered on the external authentication server and is enabled.
4. Make sure that the PAP and CHAP settings are valid.
5. If this does not resolve the problem, acquire the maintenance information, and then contact the Support Center.
aa...aa: server name
-
KAPM15083-E
The specified user was not found. (server name = aa...aa)
[Action]
The specified user was not found.
Perform the following procedure:
1. Make sure that the user is specified correctly. The user must be specified using only the user name, not the DN format.
2. Make sure that the specified user is registered in the external authentication server and is enabled.
3. Check and, if necessary, revise the values of basedn and attr in exauth.properties for the corresponding server.
4. If an LDAP hierarchical structure model is used, do the following:
- Use the hcmdsldapuser command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
- Make sure that the user account used for information searching has the necessary permissions.
5. If an LDAP flat model is used, use the hcmdsldapuser command to confirm that the information for the server name specified for the auth.server.name attribute of exauth.properties is not registered.
6. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: server name
-
KAPM15084-E
LDAP directory server error is detected. (information = aa...aa)
[Action]
LDAP directory server error is detected.
aa...aa information
-
KAPM15085-E
An SSL setting is invalid.
[Action]
An SSL setting is invalid.
Check and, if necessary, revise the SSL settings.
-
KAPM15086-E
The specified user was not found. (server name = aa...aa)
[Action]
The specified user was not found.
Perform the following:
1. Make sure that the specified user is registered in the external authentication server.
2. Check, and if necessary, revise the basedn and attr values for the corresponding server in exauth.properties.
3. If an LDAP hierarchical structure model is used, check the following:
- Using the hcmdsldapuser command, confirm that the information for the server name specified to the auth.server.name attribute of exauth.properties is registered.
- Make sure the user who is used for searching for information has the correct permissions.
aa...aa: server name
-
KAPM15087-E
A dn value is invalid. (server name = aa...aa)
[Action]
A dn value is invalid.
Perform the following:
1.Check, and if necessary, revise the basedn value for the corresponding server in the file exauth.properties.
2.If you use the hcmdsldapuser command to register the information for the server specified for the attribute auth.server.name in the file exauth.properties make sure you specify a valid value for the dn option.
aa...aa: server name
-
KAPM15088-I
The common-items check will now start.
[Action]
The common-items check will now start.
-
KAPM15089-I
The results of the common-items check were normal.
[Action]
The results of the common-items check were normal.
-
KAPM15090-E
The results of the common-items check include abnormal values.
[Action]
The results of the common-items check include abnormal values.
See the message KAPMxxxxx-E.
-
KAPM15091-I
The individual-realm check will now start.
[Action]
The individual-realm check will now start.
-
KAPM15092-I
The results of the realm identified name aa...aa check were normal.
[Action]
The results of the realm identified name aa...aa check were normal.
aa...aa: Realm identified name
-
KAPM15093-E
The results of the realm identified name aa...aa check include abnormal values.
[Action]
The results of the realm identified name aa...aa check include abnormal values.
See the message KAPMxxxxx-E.
aa...aa: Realm identified name
-
KAPM15094-I
The results of the individual-realm check were normal.
[Action]
The results of the individual-realm check were normal.
-
KAPM15095-E
The results of the individual-realm check include abnormal values.
[Action]
The results of the individual-realm check include abnormal values.
See the message KAPMxxxxx-E.
-
KAPM15096-E
The same value already exists. (line number = aa...aa, value = bb...bb)
[Action]
The same value already exists.
There are duplicate bb...bb values on line aa...aa. Check and, if necessary, revise the configuration file, and then retry the operation.
aa...aa: Line number
bb...bb: Value
-
KAPM15097-E
There is no auth.kerberos.<realm identification name>.realm that corresponds to auth.kerberos.default_realm.
[Action]
There is no auth.kerberos.<realm identification name>.realm that corresponds to auth.kerberos.default_realm.
Specify auth.kerberos.<realm identification name>.realm as the realm that corresponds to auth.kerberos.default_realm in exauth.properties.
-
KAPM15098-I
The server connection will now be checked. (user id = aa...aa, realm name = bb...bb)
[Action]
The server connection will now be checked.
aa...aa: User ID
bb...bb: Realm name
-
KAPM15102-I
The hcmdsunlockaccount command has started.
[Action]
The hcmdsunlockaccount command has started.
-
KAPM15103-I
The hcmdsunlockaccount command has finished.
[Action]
The hcmdsunlockaccount command has finished.
-
KAPM15104-E
The hcmdsunlockaccount command cannot be executed on the secondary server. Execute this command on the primary server.
[Action]
The hcmdsunlockaccount command cannot be executed on the secondary server. Execute this command on the primary server.
Execute the hcmdsunlockaccount command on the primary server.
-
KAPM15105-E
The user account to be unlocked does not have the User Management permission.
[Action]
The user account to be unlocked does not have the User Management permission.
Specify a user who has the User Management permission.
-
KAPM15108-I
The user account was unlocked successfully.
[Action]
The user account was unlocked successfully.
-
KAPM15109-I
The user account "aa...aa" will now be unlocked.
[Action]
The user account "aa...aa" will now be unlocked.
aa...aa: User name
-
KAPM15110-E
The value of hcmds.home could not be acquired.
[Action]
The value of hcmds.home could not be acquired.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15111-E
A command option is invalid.
[Action]
A command option is invalid.
Check the options.
-
KAPM15112-E
No value has been specified for an option.
[Action]
No value has been specified for an option.
Check the options.
-
KAPM15113-E
A fatal error occurred.
[Action]
A fatal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15114-E
Communication with the authentication server has failed.
[Action]
Communication with the authentication server has failed.
Make sure the HBase Storage Mgmt Common Service or the HBase Storage Mgmt Web Service on the server has started.
-
KAPM15115-E
The user ID or password is incorrect.
[Action]
The user ID or password is incorrect.
Make sure that the user ID and password are correct.
-
KAPM15116-E
An HSSOException occurred.
[Action]
An HSSOException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15117-E
An IOException occurred.
[Action]
An IOException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15118-E
An HcmdsIllegalArgumentException occurred.
[Action]
An HcmdsIllegalArgumentException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15119-E
An HcmdsUserManagementException occurred.
[Action]
An HcmdsUserManagementException occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15120-E
An exception occurred.
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15130-E
An option is invalid.
[Action]
An option specified for the command is invalid.
Specify a correct option.
-
KAPM15131-I
The hcmdsmergelog command ended successfully.
[Action]
The hcmdsmergelog command ended successfully.
-
KAPM15132-W
The format of the specified date format configuration file is invalid. (line number: "aa...aa")
[Action]
The format of the specified date format configuration file is invalid.
Make sure that the format of the specified date format configuration file is correct.
aa...aa:Line number
-
KAPM15133-W
The format of the specified merge-target configuration file is invalid. (line number: "aa...aa")
[Action]
The format of the specified merge-target configuration file is invalid.
Make sure that the log files to be merged are correctly specified in the merge-target file.
aa...aa:Line number
-
KAPM15134-W
The specified merge-target file "aa...aa" was not found.
[Action]
The specified merge-target file was not found.
Confirm the following:
- The file exists.
- You have permission to access the file.
- The file is not currently in use.
aa...aa:Log file name specified for the merge-target configuration file.
-
KAPM15135-W
The specified merge-target file "aa...aa" cannot be opened.
[Action]
The specified merge-target file "aa...aa" cannot be opened.
Confirm the following:
- You have permission to access the file.
- The file is not currently in use.
aa...aa:Log file name specified for the merge-target configuration file.
-
KAPM15136-E
The specified file "aa...aa" cannot be written to.
[Action]
The specified output file "aa...aa" cannot be written to.
Confirm the following:
- The file is not currently in use.
- The correct path has been specified for the file.
- Another file with the same filename does not already exist.
aa...aa:Configuration file
-
KAPM15137-W
The specified file cannot be opened. (file name = "aa...aa")
[Action]
The specified file cannot be opened.
Confirm the following:
- The file is not currently in use.
- The correct file path has been specified.
aa...aa: File name
-
KAPM15138-E
Execution of the hcmdsmergelog command failed.
[Action]
Execution of the hcmdsmergelog command failed.
-
KAPM15139-E
An unexpected error occurred.
[Action]
An unexpected error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15140-W
The format of the specified variable configuration file is invalid. (line number: "aa...aa")
[Action]
A setting of a variable in the variable configuration file is incorrect.
Revise the setting of the variable in the variable configuration file.
aa...aa: Line number
-
KAPM15141-E
The name of the merge-target configuration file "aa...aa" does not end in "mergelog.conf".
[Action]
The name of the merge-target configuration file is invalid because it does not end in "mergelog.conf".
Correct the name of the merge-target configuration file, so that it ends in "mergelog.conf".
aa...aa: Name of the specified merge-target configuration file.
-
KAPM15142-E
The hcmdsmergelog command failed to acquire memory.
[Action]
Acquisition of memory for the hcmdsmergelog command failed.
Check the system for the amount of available memory. If necessary, increase it.
-
KAPM15143-E
The date format configuration file "aa...aa" was not found.
[Action]
The date format configuration file was not found.
Create the date format configuration file, and specify it in the argument of the dateconf option.
aa...aa: date format configuration file
-
KAPM15144-W
An attempt to write to the log file hcmdsmergelog.log has failed.
[Action]
An attempt to write to the log file hcmdsmergelog.log has failed.
Make sure of the following:
- The file is not currently in use.
- The correct path has been specified for the file.
- Another file with the same filename does not already exist.
-
KAPM15145-E
Deletion of a temporary work file has failed.
[Action]
The command failed to delete a temporary work file.
Manually delete the temporary work file. The file name is: user-specified-output-file-name + _ temp
-
KAPM15146-E
The specified time range is invalid.
[Action]
The specified time range is invalid.
Make sure that times in the time range are specified correctly.
-
KAPM15147-W
The size of the specified file "aa...aa" cannot be acquired.
[Action]
The size of the specified file cannot be acquired.
Confirm the following:
-The file is not currently in use.
-The correct path has been specified for the file.
- The specified file is not a folder or not an empty file.
aa...aa: File name
-
KAPM15148-E
The file cannot be written to.
[Action]
The file cannot be written to.
Confirm the following:
- The file is not currently in use.
- The correct file path has been specified.
-
KAPM15149-E
The sort command could not be executed.
[Action]
The sort command could not be executed.
Confirm that the sort command can be executed from the current directory.
-
KAPM15150-E
Creation of an execution process failed.
[Action]
Creation of an execution process failed.
Confirm that the CPU is not under a heavy load because too many processes are being executed.
-
KAPM15151-E
The process is not in the signal status.
[Action]
The process is not in the signal status.
Confirm that another command is not executing the sort command.
-
KAPM15152-E
The process status could not be acquired.
[Action]
The process status could not be acquired.
Confirm that another command is not executing the sort command.
-
KAPM15153-W
No log records to be merged were found.
[Action]
No log records to be merged were found.
Confirm the following:
-The correct time range was specified.
-There are log files to be merged.
-The format of the specified merge-target configuration file is correct.
-The format of the specified date format configuration file is correct.
-
KAPM15154-E
The specified date format configuration file "aa...aa" was not found.
[Action]
The specified date format configuration file "aa...aa" was not found.
Make sure that the file path is correct.
aa...aa: specified date format configuration file
-
KAPM15155-E
The size of the specified date format configuration file "aa...aa" cannot be acquired.
[Action]
The size of the specified date format configuration file "aa...aa" cannot be acquired.
Make sure of the following:
-The correct path was specified for the file.
- A folder or empty file was not specified.
aa...aa: specified date format configuration file
-
KAPM15156-E
The specified date format configuration file "aa...aa" cannot be read.
[Action]
The specified date format configuration file "aa...aa" cannot be read.
Make sure of the following:
-The correct path was specified for the file.
- A folder or empty file was not specified.
aa...aa: specified date format configuration file
-
KAPM15157-E
The specified variable configuration file "aa...aa" was not found.
[Action]
The specified variable configuration file "aa...aa" was not found.
Make sure that the file path is correct.
aa...aa: specified variable configuration file
-
KAPM15158-E
The size of the specified variable configuration file "aa...aa" cannot be acquired.
[Action]
The size of the specified variable configuration file "aa...aa" cannot be acquired.
Make sure of the following:
-The correct path was specified for the file.
- A folder or empty file was not specified.
aa...aa: specified variable configuration file
-
KAPM15159-E
The specified variable configuration file "aa...aa" cannot be read.
[Action]
The specified variable configuration file "aa...aa" cannot be read.
Make sure of the following:
-The correct path was specified for the file.
- A folder or empty file was not specified.
aa...aa: specified variable configuration file
-
KAPM15160-E
The specified merge-target configuration file "aa...aa" was not found.
[Action]
The specified merge-target configuration file "aa...aa" was not found.
Make sure that the file path is correct.
aa...aa: specified merge-target configuration file
-
KAPM15161-E
The specified merge-target configuration file "aa...aa" cannot be acquired.
[Action]
The specified merge-target configuration file "aa...aa" cannot be acquired.
Make sure of the following:
-The correct path was specified for the file.
- A folder or empty file was not specified.
aa...aa: specified merge-target configuration file
-
KAPM15162-E
The specified merge-target configuration file "aa...aa" cannot be read.
[Action]
The specified merge-target configuration file "aa...aa" cannot be read.
Make sure of the following:
-The correct path was specified for the file.
- A folder or empty file was not specified.
aa...aa: specified variable configuration file
-
KAPM15163-E
The specified output file cannot be created.
[Action]
The specified output file cannot be created.
Make sure that the file path is correct.
-
KAPM15164-E
The specified output file cannot be written to.
[Action]
The specified output file cannot be written to.
Make sure of the following:
-The file is not currently in use.
-The correct path was specified for the file.
- Another file with the same name does not already exist.
-
KAPM15165-W
The log file "hcmdsmergelog.log" cannot be created in the specified log folder.
[Action]
The log file "hcmdsmergelog.log" cannot be created in the specified log folder.
Make sure of the following:
-The correct path was specified for the file.
-The log file "hcmdsmergelog..log" does not already exist.
-
KAPM15166-E
The format of the specified time range is invalid.
[Action]
The format of the specified time range is invalid.
Make sure that the time range is specified correctly.
-
KAPM15167-E
The date and time format is not set.
[Action]
The date and time format is not set.
Confirm the following:
- There is a date and time-format configuration file.
- You have permission to access the date and time-format configuration file.
- The date and time-format configuration file is not currently being used.
- The date and time format has been set correctly in the date and time-format configuration file.
-
KAPM15170-E
Acquisition of the installation path has failed.
[Action]
Acquisition of the installation path has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15171-E
The command aa...aa will stop because internal processing failed. (details = bb...bb)
[Action]
The specified command will stop because internal processing failed.
Re-execute the command. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
bb...bb: Details
-
KAPM15172-W
Log initialization failed.
[Action]
Log initialization failed.
If the problem occurs frequently, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15173-E
A memory allocation error occurred.
[Action]
A memory allocation error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15174-E
The command aa...aa will stop because setting of an environment variable failed. (details = bb...bb)
[Action]
The command will stop because setting of an environment variable failed.
Re-execute the command. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command name
bb...bb: Details
-
KAPM15175-E
An error occurred in an internal function. (function = aa...aa, error code = bb...bb)
[Action]
An error occurred in an internal function.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Function
bb...bb: Error code
-
KAPM15200-I
A connection was successfully established. (KDC = aa...aa)
[Action]
A connection was successfully established.
aa...aa: KDC
-
KAPM15201-E
An attempt to connect failed. (KDC = aa...aa)
[Action]
An attempt to connect failed.
Make sure that the external authentication server is running correctly, and then perform the following procedure:
1. Make sure that the realm name and KDC specified in exauth.properties are correct.
2. Make sure that the network is correctly connected.
3. Check the firewall settings.
4. Make sure that Kerberos is compatible with the external authentication server.
5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: KDC
-
KAPM15202-E
An attempt to connect to the DNS server failed.
[Action]
An attempt to connect to the DNS server failed.
Check and, if necessary, revise the DNS server settings.
-
KAPM15203-E
On the DNS server,the SRV record corresponding to the realm name is not defined. (realm name = aa...aa)
[Action]
On the DNS server,the SRV record corresponding to the realm name is not defined.
Perform one of the following procedures:
- Make sure that the realm name is correct.
- On the DNS server, define the SRV record corresponding to the realm name.
aa...aa: Realm name
-
KAPM15204-E
An unexpected error occurred on the DNS server.
[Action]
An unexpected error occurred on the DNS server.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15205-E
The KDC resolution failed. (KDC = aa...aa)
[Action]
The KDC resolution failed.
Check and, if necessary, revise the DNS server settings.
aa...aa: KDC
-
KAPM15206-E
An attempt to authenticate failed. (KDC = aa...aa)
[Action]
An attempt to authenticate failed.
Perform one of the following procedures:
- Make sure the specified user is registered on the external authentication server.
- Check the password of the specified user.
- Make sure the time difference between servers not exceeds the specified value in the exauth.properties.
- Make sure the authentication user password has not expired.
- Make sure the authentication user account is not invalid.
aa...aa: KDC
-
KAPM15207-E
The specified user was not found. (KDC = aa...aa)
[Action]
The specified user was not found.
Make sure the specified user is registered on the external authentication server.
aa...aa: KDC
-
KAPM15208-E
The specified password is invalid. (KDC = aa...aa)
[Action]
The specified password is invalid.
Check the password of the specified user.
aa...aa: KDC
-
KAPM15209-E
The time difference between servers exceeds the specified value in exauth.properties. (KDC = aa...aa)
[Action]
The time difference between servers exceeds the specified value in the exauth.properties.
Make sure that the server times are synchronized.
aa...aa: KDC
-
KAPM15210-E
The authentication user password has expired. (KDC = aa...aa)
[Action]
The authentication user password has expired.
Change the password of the specified user.
aa...aa: KDC
-
KAPM15211-E
The authentication user account is invalid. (KDC = aa...aa)
[Action]
The authentication user account is invalid.
Validate the registered user on the external authentication server.
aa...aa: KDC
-
KAPM15212-I
Check the DNS server to confirm the connection status.
[Action]
Check the DNS server to confirm the connection status.
-
KAPM15213-I
Use the default realm to confirm the connection status.
[Action]
Use the default realm to confirm the connection status.
-
KAPM15214-E
The command cannot be executed on the secondary server.
[Action]
The command cannot be executed on the secondary server.
-
KAPM15215-E
Creation of the file failed. (file name = aa...aa)
[Action]
Creation of the file failed. (file name = aa...aa)
Perform one of the following procedures:
- Make sure the file path is correct.
- Make sure you have permission to create a file on the specified path.
- Make sure there are no files that have the same name as the specified file.
aa...aa: File name
-
KAPM15216-E
A syntax error occurred.
[Action]
A syntax error occurred.
See the message KAPMxxxxx-E.
-
KAPM15217-W
The DBMS is not running.
[Action]
The DBMS is not running.
Make sure that the DBMS is running.
-
KAPM15218-W
The DBMS is blocked.
[Action]
The DBMS is blocked.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15219-W
An error occurred while the DBMS was being accessed.
[Action]
An error occurred while the DBMS was being accessed.
Confirm that the DBMS, HBase Storage Mgmt Web service, and HBase Storage Mgmt Common service are running. If they are running, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15220-W
The user to be authenticated was not found in the DBMS. (user id = aa...aa)
[Action]
The user to be authenticated was not found in the DBMS. (user id = aa...aa)
Make sure aa...aa is registered in the DBMS.
aa...aa: User ID
-
KAPM15221-W
An unexpected error occurred on the DBMS.
[Action]
An unexpected error occurred on the DBMS.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15222-E
Acquisition of the KDC from aa...aa failed.
[Action]
Acquisition of the KDC from aa...aa failed.
Perform one of the following procedures:
- Make sure that the realm name is correct.
- Make sure that there is a KDC corresponding to the realm name.
aa...aa: Realm name
-
KAPM15223-E
An unexpected error occurred. (KDC = aa...aa)
[Action]
An unexpected error occurred. (KDC = aa...aa)
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: KDC
-
KAPM15224-W
The specified user is not registered in the DBMS as a user of the Kerberos authentication method. (user id = aa...aa)
[Action]
The specified user is not registered in the DBMS as a user of the Kerberos authentication method. (user id = aa...aa)
Perform one of the following procedures:
- Change the specified user authentication method to Kerberos.
- Create a new user of the Kerberos authentication method.
-
KAPM15225-W
The configuration file contains a syntax error. (line number = aa...aa, value = bb...bb)
[Action]
The configuration file contains a syntax error.
The value bb...bb on line aa...aa caused a syntax error. Check and, if necessary, revise the configuration file, and then retry the operation.
aa...aa: Line number
bb...bb: Value
-
KAPM15226-E
An information search user is not registered. (aa...aa = bb...bb)
[Action]
An information search user is not registered.
Register an information search user for bb...bb.
aa...aa: Property name
bb...bb: Property value
-
KAPM15227-I
Group linkage is enabled.
[Action]
Group linkage is enabled.
-
KAPM15228-W
The external authentication group was not linked to because an authentication user was found on the DBMS.
[Action]
The external authentication group was not linked to because an authentication user was found on the DBMS.
When linking to an external authentication group, specify a user not registered in Hitachi Storage Command Suite.
-
KAPM15229-I
Group acquisition for the server will now be checked. (aa...aa = bb...bb, host = cc...cc, port = dd...dd, protocol = ee...ee)
[Action]
Group acquisition for the server will now be checked.
aa...aa: Property name
bb...bb: Property value
cc...cc: Host name
dd...dd: Port number
ee...ee: Protocol
-
KAPM15230-I
Group acquisition was successful.
[Action]
Group acquisition was successful.
-
KAPM15231-E
Group acquisition failed.
[Action]
Group acquisition failed.
Perform one of the following actions:
- Make sure that the specified user is registered in a group.
- Check, and if necessary, revise the values of basedn for the corresponding server in exauth.properties.
-
KAPM15232-E
The group was not registered.
[Action]
The group was not registered.
Register the group to the specified user. Alternatively, specify the user to whom the group is registered.
-
KAPM15233-E
On the DNS server,the SRV record corresponding to the domain name is not defined. (domain name = aa...aa)
[Action]
On the DNS server,the SRV record corresponding to the domain name is not defined.
Perform one of the following actions:
- On the DNS server, define the SRV record corresponding to the domain name.
- Make sure that the domain name is correct.
aa...aa: Domain name
-
KAPM15234-I
The DNS server has been referenced. (aa...aa = bb...bb, domain name = cc...cc)
[Action]
The DNS server has been referenced.
aa...aa: Property name
bb...bb: Property value
cc...cc: Domain name
-
KAPM15235-E
A server error occurred. (aa...aa = bb...bb)
[Action]
A server error occurred.
Perform the following procedure:
1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network.
2. Use the hcmdsldapuser command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
3. If StartTLS is used, check the SSL settings.
4. If an OCSP is enabled, make sure that the certificate is valid.
5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Property name
bb...bb: Property value
-
KAPM15236-E
A check cannot be performed because the group definition is invalid.
[Action]
A check cannot be performed because the group definition is invalid.
Revise the auth.group.mapping value, and then retry the operation.
-
KAPM15237-I
Group acquisition was successful. (aa...aa = bb...bb)
[Action]
Group acquisition was successful.
aa...aa: Property name
bb...bb: Property value
-
KAPM15238-E
Group acquisition failed. (aa...aa = bb...bb)
[Action]
Group acquisition failed.
Perform one of the following actions:
- Make sure that the specified user is registered in a group.
- Check, and if necessary, revise the values of basedn for the corresponding server in exauth.properties.
aa...aa: Property name
bb...bb: Property value
-
KAPM15239-E
The group was not registered. (aa...aa = bb...bb)
[Action]
The group was not registered.
Register the group to the specified user. Alternatively, specify the user to whom the group is registered.
aa...aa: Property name
bb...bb: Property value
-
KAPM15240-E
On the DNS server,the SRV record corresponding to the domain name is not defined. (aa...aa = bb...bb)
[Action]
On the DNS server,the SRV record corresponding to the domain name is not defined.
Perform one of the following actions:
- On the DNS server, define the SRV record corresponding to the domain name.
- Make sure that the domain name is correct.
aa...aa: Property name
bb...bb: Property value
-
KAPM15241-E
An attempt to connect to the DNS server failed. (aa...aa = bb...bb)
[Action]
An attempt to connect to the DNS server failed.
Check and, if necessary, revise the DNS server settings.
aa...aa: Property name
bb...bb: Property value
-
KAPM15242-E
An unexpected error occurred on the DNS server. (aa...aa = bb...bb)
[Action]
An unexpected error occurred on the DNS server.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Property name
bb...bb: Property value
-
KAPM15243-E
The common items cannot be checked because they are not set correctly.
[Action]
The common items cannot be checked because they are not set correctly.
Revise the settings for the common items, and then retry the operation.
-
KAPM15244-I
The connection for realm aa...aa was checked.
[Action]
The connection for realm aa...aa was checked.
aa...aa: Realm name
-
KAPM15245-I
A connection was successfully established. (aa...aa = bb...bb)
[Action]
A connection was successfully established.
aa...aa: Property name
bb...bb: Property value
-
KAPM15246-E
A connection attempt has failed. (aa...aa = bb...bb)
[Action]
A connection attempt has failed.
Make sure that the external authentication server is running correctly, and then perform one of the following procedures:
For LDAP:
1. Make sure that the host or IP address, port, and protocol specified in exauth.properties are correct.
2. Make sure that the network is correctly connected.
3. Check the firewall settings.
4. Make sure that the LDAP directory server is compatible with the LDAPv3 protocol.
5. If StartTLS is used, check the SSL settings. For StartTLS, specify the host, not the IP address.
6. If an OCSP is enabled, check the following:
- Make sure that the certificate is valid.
7. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
For RADIUS:
1. Make sure that the host or IP address, port, and protocol specified in exauth.properties are correct.
2. Check and then respecify the client secret set for the external authentication server and the secret set for the client.
3. Make sure that the network is correctly connected.
4. Check the firewall settings.
5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Property name
bb...bb: Property value
-
KAPM15247-E
Authentication of the user account used for information searching has failed. (aa...aa = bb...bb)
[Action]
Authentication of the user account used for information searching failed.
Perform one of the following procedures:
For LDAP hierarchical structure model:
- Make sure the DN and the password of the user who is used for searching for information are correct, and then re-execute the hcmdsldapuser command.
For LDAP flat model:
- Using the hcmdsldapuser command, confirm that the information for the server name specified to the auth.server.name attribute of exauth.properties is not registered.
aa...aa: Property name
bb...bb: Property value
-
KAPM15248-E
The DN of the user account used for information searching was not found. (aa...aa = bb...bb)
[Action]
The DN of the user account used for information searching was not found.
Perform one of the following procedures:
For LDAP hierarchical structure model:
- Make sure the DN of the user account used for information searching is correct, and then re-execute the command hcmdsldapuser.
For LDAP flat model:
- Using the hcmdsldapuser command, confirm that the information for the server name specified to the auth.server.name attribute of exauth.properties is not registered.
aa...aa: Property name
bb...bb: Property value
-
KAPM15249-E
Authentication of the specified user has failed. (aa...aa = bb...bb)
[Action]
Authentication of the specified user failed.
Perform one of the following procedures:
For LDAP:
1. Make sure that the user is specified correctly. The user must be specified using only the user name, not the DN format.
2. Make sure that the password for the specified user is correct.
3. Make sure that the specified user is registered in the external authentication server and is enabled.
4. Check and, if necessary, revise the values of basedn and attr in exauth.properties for the corresponding server.
5. If an LDAP hierarchical structure model is used, do the following:
- Use the hcmdsldapuser command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
- Make sure that the user account used for information searching has the necessary permissions.
6. If an LDAP flat model is used, use the hcmdsldapuser command to confirm that the information for the server name specified for the auth.server.name attribute of exauth.properties is not registered.
7. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
For RADIUS:
1. Make sure that the user is specified correctly.
2. Make sure that the password for the specified user is correct.
3. Make sure that the specified user is registered in the external authentication server and is enabled.
4. Make sure that the PAP and CHAP settings are valid.
5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Property name
bb...bb: Property value
-
KAPM15250-E
The specified user was not found. (aa...aa = bb...bb)
[Action]
The specified user was not found.
Perform the following procedure:
1. Make sure that the user is specified correctly. The user must be specified using only the user name, not the DN format.
2. Make sure that the specified user is registered in the external authentication server and is enabled.
3. Check and, if necessary, revise the values of basedn and attr in exauth.properties for the corresponding server.
4. If an LDAP hierarchical structure model is used, do the following:
- Use the hcmdsldapuser command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered.
- Make sure that the user account used for information searching has the necessary permissions.
5. If an LDAP flat model is used, use the hcmdsldapuser command to confirm that the information for the server name specified for the auth.server.name attribute of exauth.properties is not registered.
6. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Property name
bb...bb: Property value
-
KAPM15251-E
The specified user was not found. (aa...aa = bb...bb)
[Action]
The specified user was not found.
Perform the following:
1. Make sure that the specified user is registered in the external authentication server.
2. Check, and if necessary, revise the basedn and attr values for the corresponding server in exauth.properties.
3. If an LDAP hierarchical structure model is used, check the following:
- Using the hcmdsldapuser command, confirm that the information for the server name specified to the auth.server.name attribute of exauth.properties is registered.
- Make sure the user who is used for searching for information has the correct permissions.
aa...aa: Property name
bb...bb: Property value
-
KAPM15252-E
A dn value is invalid. (aa...aa = bb...bb)
[Action]
A dn value is invalid.
Perform the following:
1.Check, and if necessary, revise the basedn value for the corresponding server in the file exauth.properties.
2.If you use the hcmdsldapuser command to register the information for the server specified for the attribute auth.server.name in the file exauth.properties make sure you specify a valid value for the dn option.
aa...aa: Property name
bb...bb: Property value
-
KAPM15253-E
The JP1/Base connection could not be verified because the authentication user was not found in the DBMS.
[Action]
The JP1/Base connection could not be verified because the authentication user was not found in the DBMS.
Delete the specified user from the suite product DBMS, or specify a user who is not registered in the suite product database.
-
KAPM15254-E
HiCommand Base does not support this version of JP1/Base.
[Action]
HiCommand Base does not support this version of JP1/Base.
Use JP1/Base 10-00 or later.
-
KAPM15255-E
Acquisition of the JP1/Base version failed.
[Action]
Acquisition of the JP1/Base version failed.
Verify that JP1/Base on the primary server is running properly. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
-
KAPM15256-E
An attempt to connect to JP1/Base failed.
[Action]
An attempt to connect to JP1/Base failed.
Verify that JP1/Base on the primary server is running properly. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
-
KAPM15257-E
JP1/Base initialization failed.
[Action]
JP1/Base initialization failed.
Verify that JP1/Base on the primary server is running properly. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
-
KAPM15258-I
The JP1/Base connection will now be checked.
[Action]
The JP1/Base connection will now be checked.
-
KAPM15259-I
The JP1/Base connection was successfully checked.
[Action]
The JP1/Base connection was successfully checked.
-
KAPM15260-E
JP1/Base user authentication failed.
[Action]
JP1/Base user authentication failed.
Enter the correct user ID and password. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
-
KAPM15261-E
JP1/Base authentication failed because the user ID or password is incorrect.
[Action]
JP1/Base authentication failed because the user ID or password is incorrect.
Enter the correct user ID and password.
-
KAPM15262-I
HiCommand Base will now check whether user permission information can be acquired from JP1/Base.
[Action]
HiCommand Base will now check whether user permission information can be acquired from JP1/Base.
-
KAPM15263-I
User permission information was successfully acquired from JP1/Base.
[Action]
User permission information was successfully acquired from JP1/Base.
-
KAPM15264-E
Permissions have not been assigned to the user in JP1/Base.
[Action]
Permissions have not been assigned to the user in JP1/Base.
Assign permissions to the user from JP1/Base.
-
KAPM15265-E
JP1/Base is not installed.
[Action]
JP1/Base is not installed.
Install JP1/Base on the primary server.
-
KAPM15266-E
Acquisition of user permission information from JP1/Base failed.
[Action]
Acquisition of user permission information from JP1/Base failed.
Retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
-
KAPM15267-E
This JP1/Base version is not supported.
[Action]
This JP1/Base version is not supported.
Use JP1/Base 10-00 or later.
-
KAPM15268-I
The user permission information will now be acquired from JP1/Base and checked.
[Action]
The user permission information will now be acquired from JP1/Base and checked.
-
KAPM15300-I
The hcmdslicense3 command started.
[Action]
The hcmdslicense3 command started.
-
KAPM15301-I
The hcmdslicense3 command successfully executed.
[Action]
The hcmdslicense3 command successfully executed.
-
KAPM15302-E
The hcmdslicense3 command failed.
[Action]
The hcmdslicense3 command failed.
-
KAPM15303-I
The aa...aa function started.
[Action]
The function started.
aa...aa: function name
-
KAPM15304-I
The aa...aa function ended.
[Action]
The function ended.
aa...aa: function name
-
KAPM15305-E
Acquisition of the installation path failed.
[Action]
Acquisition of the installation path failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15306-E
One or more options are invalid.
[Action]
One or more options are invalid.
Check the options.
-
KAPM15307-E
Allocation of memory to store the log file path failed.
[Action]
Allocation of memory to store the log file path failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15308-E
Log initialization failed.
[Action]
Log initialization failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15309-I
The license was successfully displayed.
[Action]
The license was successfully displayed.
-
KAPM15310-E
An attempt to display the license failed.
[Action]
An attempt to display the license failed.
-
KAPM15311-E
Encoding failed.
[Action]
Encoding failed.
-
KAPM15312-E
Decoding failed.
[Action]
Decoding failed.
-
KAPM15313-I
License registration processing started.
[Action]
License registration processing started.
-
KAPM15314-I
License deletion processing started.
[Action]
License deletion processing started.
-
KAPM15315-I
License display processing started.
[Action]
License display processing started.
-
KAPM15316-I
License reset processing started.
[Action]
License reset processing started.
-
KAPM15317-E
The entered total capacity license is not supported.
[Action]
The entered total capacity license is not supported.
Enter a valid license.
-
KAPM15318-E
The entered server capacity license is not supported.
[Action]
The entered server capacity license is not supported.
Enter a valid license.
-
KAPM15319-I
The license key was processed. (identifier = aa...aa, number = bb...bb)
[Action]
The message displays information about the processed license key.
aa...aa: Identifier
bb...bb: Number
-
KAPM15320-I
aa...aa
[Action]
The message displays the command-line options.
aa...aa: Command line argument
-
KAPM15321-E
A memory allocation error occurred.
[Action]
A memory allocation error occurred.
Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15322-E
Exclusion processing failed. (function = aa...aa, detailed error code = bb...bb)
[Action]
Exclusion processing failed.
Retry the operation. If the problem is not resolved, a detailed investigation is required to determine the cause and resolve the problem.
Collect failure information, and then contact the Support Center.
aa...aa: Function
bb...bb: Detailed error code
-
KAPM15323-E
Exclusive control has failed.
[Action]
Exclusive control has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15324-E
Information related to the exclusion control failure will be output. (function name = aa...aa, detailed error code = bb...bb, processing time = cc...cc)
[Action]
Information related to the exclusion control failure will be output.
Take action according to the previous message.
aa...aa: Function name
bb...bb: Detailed error code
cc...cc: Processing time
-
KAPM15325-E
An attempt to release the lock failed.
[Action]
An attempt to release the lock failed.
Retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15330-I
Processing ended normally. (aa...aa : bb...bb) cc...cc
[Action]
Processing ended normally.
aa...aa: return code
bb...bb: error code
cc...cc: license information
-
KAPM15331-E
The system environment is invalid.
[Action]
The system environment is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15332-E
The license has expired.
[Action]
The license has expired.
Enter a valid license key or license key file.
-
KAPM15333-E
The entered license key is invalid. (aa...aa : bb...bb) cc...cc
[Action]
The entered license key is invalid.
Enter a valid license key.
aa...aa: return code
bb...bb: error code
cc...cc: license information
-
KAPM15334-E
The license key file that was entered could not be found.
[Action]
The license key file that was entered could not be found.
Enter a valid license key file.
-
KAPM15335-E
The license key file that was entered is invalid.
[Action]
The license key file that was entered is invalid.
Enter a valid license key file.
-
KAPM15336-E
The license key to be processed does not exist in the license key file.
[Action]
The license key to be processed does not exist in the license key file.
Enter a valid license key file.
-
KAPM15337-E
The license to be deleted does not exist.
[Action]
The license to be deleted does not exist.
Specify another license to delete.
-
KAPM15338-E
The entered subscription license key has expired.
[Action]
The entered subscription license key has expired.
Enter a valid subscription license.
-
KAPM15400-I
A Daemon will now start.
[Action]
A Daemon will now start.
-
KAPM15401-I
A Daemon has stopped.
[Action]
A Daemon has stopped.
-
KAPM15402-E
A Daemon has terminated abnormally. Code=[aa...aa]
[Action]
A Daemon has terminated abnormally.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: end code of Daemon
-
KAPM15411-I
hcmdssvlog [aa...aa]{,[bb...bb],......[.....]}
[Action]
The options specified for the command are displayed.
aa...aa: command line argument
bb...bb: command line argument
-
KAPM15417-E
An option is invalid. Code=[aa...aa], Data=[bb...bb]
[Action]
An option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: code indicating the error location
bb...bb: problematic option and its value
-
KAPM15418-E
An unexpected exception occurred.
[Action]
An unexpected exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15422-E
The option is invalid.
[Action]
The option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15423-E
The specified value of option is invalid. (option = aa...aa)
[Action]
The specified value of option is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: option name
-
KAPM15424-E
The directory aa...aa does not exist.
[Action]
The directory aa...aa does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: directory name
-
KAPM15425-E
A file with the same name as the specified directory already exists. (file = aa...aa)
[Action]
A file with the same name as the specified directory already exists.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: file name
-
KAPM15426-E
The license information file does not exist in the specified directory. (license information file = aa...aa)
[Action]
The license information file does not exist in the specified directory.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: license information file
-
KAPM15427-E
The license information file cannot be accessed. (license information file = aa...aa)
[Action]
The license information file cannot be accessed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: license information file
-
KAPM15428-E
The license information file might be corrupted. (license information file = aa...aa)
[Action]
The license information file might be corrupted.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: license information file
-
KAPM15429-E
The license information file at the transfer destination cannot be accessed. (license information file = aa...aa)
[Action]
The license information file at the transfer destination cannot be accessed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: license information file
-
KAPM15430-E
An attempt to write to the license information file failed. (license information file = aa...aa)
[Action]
An attempt to write to the license information file failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: license information file
-
KAPM15431-E
Comparison of the license definition files at the transfer source and transfer destination failed.
[Action]
Comparison of the license definition files at the transfer source and transfer destination failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15433-E
An attempt to give the license information file the hidden attribute failed.
[Action]
An attempt to give the license information file the hidden attribute failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15434-E
An attempt to transfer license information in the DKC_info format failed.
[Action]
An attempt to transfer license information in the DKC_info format failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15435-E
The numbers of license information items on the transfer source and the transfer destination do not match. (transfer source = aa...aa, transfer destination = bb...bb)
[Action]
The numbers of license information items on the transfer source and the transfer destination do not match. (transfer source = aa...aa, transfer destination = bb...bb)
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: number of license information items on transfer source
bb...bb: number of license information items on transfer destination
-
KAPM15436-E
The status lines of the license information files at the transfer source and transfer destination do not match. (line number = aa...aa)
[Action]
The status lines of the license information files at the transfer source and transfer destination do not match.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: line number of the license information file at the transfer source
-
KAPM15437-E
The PPID values of the transfer source and transfer destination do not match. (transfer source = aa...aa, transfer destination = bb...bb)
[Action]
The PPID values of the transfer source and transfer destination do not match.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: PPID value of the transfer source
bb...bb: PPID value of the transfer destination
-
KAPM15438-E
The device numbers of the transfer source and transfer destination do not match. (transfer source = aa...aa, transfer destination = bb...bb)
[Action]
The device numbers of the transfer source and transfer destination do not match.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: device number of the transfer source
bb...bb: device number of the transfer destination
-
KAPM15439-E
The license key types of the transfer source and the transfer destination do not match. (transfer source = aa...aa, transfer destination = bb...bb)
[Action]
The license key types of the transfer source and the transfer destination do not match.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: license key type of the transfer source
bb...bb: license key type of the transfer destination
-
KAPM15440-E
The device types of the transfer source and the transfer destination do not match. (transfer source = aa...aa, transfer destination = bb...bb)
[Action]
The device types of the transfer source and the transfer destination do not match.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: device type of the transfer source
bb...bb: device type of the transfer destination
-
KAPM15442-E
The license capacities of the transfer source and the transfer destination do not match. (transfer source = aa...aa, transfer destination = bb...bb)
[Action]
The license capacities of the transfer source and the transfer destination do not match.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: license capacity of the transfer source
bb...bb: license capacity of the transfer destination
-
KAPM15443-E
The expiration dates of the transfer source and the transfer destination do not match. (transfer source = aa...aa, transfer destination = bb...bb)
[Action]
The expiration dates of the transfer source and the transfer destination do not match.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: expiration date of the transfer source
bb...bb: expiration date of the transfer destination
-
KAPM15444-E
The serial numbers of the transfer source and the transfer destination do not match. (transfer source = aa...aa, transfer destination = bb...bb)
[Action]
The serial numbers of the transfer source and the transfer destination do not match.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: serial number of the transfer source
bb...bb: serial number of the transfer destination
-
KAPM15445-E
The license information file at the transfer destination cannot be accessed. (type = aa...aa)
[Action]
The license information file at the transfer destination cannot be accessed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: product name
-
KAPM15446-E
The license information file at the transfer destination might be corrupted. (type = aa...aa)
[Action]
The license information file at the transfer destination might be corrupted.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: product name
-
KAPM15447-E
Execution of the hcmdssethiddenfile command failed.
[Action]
Execution of the hcmdssethiddenfile command failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15448-I
The hcmdslicenseconvert command ended normally.
[Action]
The hcmdslicenseconvert command ended normally.
-
KAPM15449-E
An unexpected exception occurred.
[Action]
An unexpected exception occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15450-I
hcmdslicenseconvert [aa...aa]{,[bb...bb],......[.....]}
[Action]
This message displays the command line arguments that were specified for the command.
aa...aa: command line argument
bb...bb: command line argument
-
KAPM15451-E
An attempt to transfer a license failed because the fixed character string inserted into the license information file on the transfer destination was invalid.
[Action]
An attempt to transfer a license failed because the fixed character string inserted into the license information file on the transfer destination was invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15452-I
License information before migration: aa...aa
[Action]
This message displays the license information before migration.
aa...aa: License information
-
KAPM15460-I
The hcmdschgjdk command started.
[Action]
The hcmdschgjdk command started.
-
KAPM15461-I
The hcmdschgjdk command successfully ended.
[Action]
The hcmdschgjdk command successfully ended.
-
KAPM15462-E
The hcmdschgjdk command failed.
[Action]
The hcmdschgjdk command failed.
-
KAPM15463-I
The aa...aa function started.
[Action]
A function started.
aa...aa: function name
-
KAPM15464-I
The aa...aa function ended.
[Action]
A function ended.
aa...aa: function name
-
KAPM15465-E
Acquisition of the installation path failed.
[Action]
Acquisition of the installation path failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15466-E
One or more options are invalid.
[Action]
One or more command options are invalid.
Revise the options.
-
KAPM15467-E
Allocation of memory to store the log file path failed.
[Action]
Allocation of memory to store the log file path failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15468-E
Log initialization failed.
[Action]
Log initialization failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15469-E
An internal error occurred.
[Action]
An internal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15470-E
A fatal error occurred.
[Action]
A fatal error occurred.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15471-I
The hcmdschgjdk command ended.
[Action]
The hcmdschgjdk command ended.
-
KAPM15472-I
The JDK being used was changed.
[Action]
The JDK being used was changed.
-
KAPM15473-I
The JDK being used was not changed.
[Action]
The JDK being used was not changed.
-
KAPM15474-E
The platform is not supported.
[Action]
The platform is not supported.
-
KAPM15475-E
Creation of a symbolic link failed.
[Action]
Creation of a symbolic link failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15476-W
A JDK could not be detected from the installation information of this OS.
[Action]
A JDK could not be detected from the installation information of this OS.
A JDK could not be detected from the installation information of this OS.
If the OS is Solaris or Linux and the default installation destination for the Oracle JDK is changed, the Oracle JDK installation destination cannot be acquired, and the Oracle JDK will not appear as a choice in the JDK selection window.
To change the JDK that is used, select Use the Java Development Kit bundled with the product or Set the installation path to a Java Development Kit.
-
KAPM15477-E
Detection of a JDK failed.
[Action]
Detection of a JDK failed.
Make sure that a JDK is installed. If this error occurs again, directly enter the JDK installation path.
-
KAPM15478-I
JDK version = aa...aa
[Action]
Indicates the JDK version.
aa...aa: JDK version
-
KAPM15479-I
JDK currently being used: name = aa...aa
[Action]
Indicates the JDK currently being used.
aa...aa: JDK type
-
KAPM15480-I
Selected JDK: name = aa...aa, installation path = bb...bb
[Action]
Indicates the selected JDK.
aa...aa: JDK type
bb...bb: JDK installation path
-
KAPM15481-E
The file "aa...aa" does not exist.
[Action]
The specified file does not exist.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: file name
-
KAPM15482-E
Execution of the aa...aa command failed.
[Action]
Execution of a command failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: command name
-
KAPM15483-I
Enter the number of the JDK to use.
[Action]
Enter the number of the JDK to use.
-
KAPM15484-I
JDK currently being used: aa...aa
[Action]
Indicates the JDK currently being used.
aa...aa: JDK type
-
KAPM15485-I
Enter the JDK installation path.
[Action]
Enter the JDK installation path.
-
KAPM15486-I
To maintain the current settings, do not enter anything, and then press [Enter].
[Action]
To maintain the current settings, do not enter anything, and then press [Enter].
-
KAPM15487-I
Bundled JDK
[Action]
Indicates the bundled JDK.
-
KAPM15488-I
Enter the JDK installation path.
[Action]
Enter the JDK installation path.
-
KAPM15489-E
The specified value is invalid.
[Action]
The specified value is invalid.
Revise the specified value.
-
KAPM15490-E
The specified JDK could not be used.
[Action]
The specified JDK could not be used.
Check the status of the installed JDK.
-
KAPM15491-I
Detected JDK: name = aa...aa, installation path = bb...bb
[Action]
Indicates the detected JDK.
aa...aa: JDK type
bb...bb: JDK installation path
-
KAPM15492-E
The file system at the installation destination is not NTFS.
[Action]
The file system at the installation destination is not NTFS.
-
KAPM15493-E
An error occurred during execution of the aa...aa command.
[Action]
An error occurred during command execution.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: command name
-
KAPM15494-E
An attempt to copy from the file "aa...aa" to the file "bb...bb" failed.
[Action]
An attempt to copy from one file to another file failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: name of the source file
bb...bb: name of the destination file
-
KAPM15495-E
An attempt to edit the file "aa...aa" failed.
[Action]
An attempt to edit a file failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: file name
-
KAPM15496-I
The command was executed. (command name = aa...aa, return code = bb...bb)
[Action]
The command was executed.
aa...aa: Command name
bb...bb: Return code
-
KAPM15497-E
A memory allocation error occurred.
[Action]
A memory allocation error occurred.
Retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15500-I
Execution of the "aa...aa" command has started.
[Action]
Execution of the "aa...aa" command has started.
aa...aa: Command name
-
KAPM15501-I
The command was executed. (command name = aa...aa, return code = bb...bb)
[Action]
The command was executed.
aa...aa: Command name
bb...bb: Return code
-
KAPM15502-E
The error has occurred in aa...aa command. code=bb...bb
[Action]
The error has occurred in aa...aa command.
Confirm that there are no syntax errors in the command specification. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Command
bb...bb: Error code
-
KAPM15503-I
aa...aa
[Action]
The message displays the command-line options.
aa...aa: Command line argument
-
KAPM15504-E
An error occurred in an internal function. (function = aa...aa, error code = bb...bb)
[Action]
An error occurred in an internal function.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Function
bb...bb: Error code
-
KAPM15505-E
Log initialization failed.
[Action]
Log initialization failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15506-E
Acquisition of the installation path failed.
[Action]
Acquisition of the installation path failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15507-E
Allocation of memory to store the log file path failed.
[Action]
Allocation of memory to store the log file path failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15510-I
The hcmdsdbpdls command ended successfully.
[Action]
The hcmdsdbpdls command ended successfully.
-
KAPM15511-E
Execution of the hcmdsdbpdls command failed.
[Action]
Execution of the hcmdsdbpdls command failed.
See the KAPMxxxxx-E message output right before this message.
-
KAPM15512-E
An option is invalid.
[Action]
An option is invalid.
Specify a valid option, and then re-execute the command.
-
KAPM15513-E
The directory does not exist. (directory path = aa...aa)
[Action]
The directory does not exist.
Confirm that the directory exists.
aa...aa: Directory path
-
KAPM15514-E
Hitachi Command Suite Common Component has not been installed.
[Action]
Hitachi Command Suite Common Component has not been installed.
Confirm that Hitachi Command Suite Common Component has been installed.
-
KAPM15515-E
Execution of the pdls command failed.
[Action]
Execution of the pdls command failed.
Start the DBMS.
If the DBMS is already running, determine the cause of the problem, and resolve it. Collect the error information, and then contact the Support Center.
-
KAPM15516-I
The pdls command execution results: aa...aa
[Action]
The pdls command execution results
aa...aa: Screen output of the executed command
-
KAPM15517-I
The hcmdsdbpdls command has started.
[Action]
The hcmdsdbpdls command has started.
-
KAPM15518-I
A connection with HiRDB has been established.
[Action]
A connection with HiRDB has been established.
-
KAPM15519-I
A connection with HiRDB has not been established.
[Action]
A connection with HiRDB has not been established.
-
KAPM15520-E
An attempt to output a file has failed. (file path = aa...aa)
[Action]
An attempt to output a file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File path
-
KAPM15521-E
The path is not an absolute path. (file path = aa...aa)
[Action]
The path is not an absolute path.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File path
-
KAPM15522-E
Acquisition of the HiCommand Base installation path failed.
[Action]
Acquisition of the HiCommand Base installation path failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15523-E
An attempt to set the environment variable has failed.
[Action]
An attempt to set the environment variable failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15524-W
An attempt to delete the file failed. (file path = aa...aa)
[Action]
An attempt to delete the file failed.
Confirm the following, and then manually delete the CSV file:
- The file is not in use.
- You have the proper access permissions.
aa...aa: File path
-
KAPM15525-E
An attempt to delete the file to which the HiRDB connection status is output failed. (file path = aa...aa)
[Action]
An attempt to delete the file to which the HiRDB connection status is output failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File path
-
KAPM15526-E
Analysis of the pdls results failed.
[Action]
Analysis of the pdls results failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15527-E
Memory allocation failed.
[Action]
Memory allocation failed.
Retry the operation. If the problem persists, collect the maintenance information, and then contact the Support Center.
-
KAPM15528-E
An error occurred in an internal function. (function = aa...aa, error code = bb...bb)
[Action]
An error occurred in an internal function.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Function
bb...bb: Error code
-
KAPM15529-E
One or more arguments specified for the hcmdsPutenv function are invalid.
[Action]
One or more arguments specified for the hcmdsPutenv function are invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15530-W
An attempt to output the execution results of the pdls command to the log file failed.
[Action]
An attempt to output the execution results of the pdls command to the log file failed.
-
KAPM15550-E
Acquisition of the version of aa...aa failed.
[Action]
Acquisition of the product version failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Product name
-
KAPM15551-E
The system environment is invalid.
[Action]
The system environment is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15552-E
Reading of the file failed. (file name = aa...aa)
[Action]
Reading of the file failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File path
-
KAPM15553-E
The product version of the backup is different from the product version of the current environment.
[Action]
The product version associated with the data backed up with the hcmdsdb command is different from the product version of the environment attempting to be restored to.
Make the version of the product being restored to the same as the version of the product when it was backed up, and then re-execute the command.
If the problem is not resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15554-W
Deletion of a file failed. (file name = aa...aa)
[Action]
Deletion of a temporary file used by this command failed.
Confirm the following points, manually delete the file, and then re-execute the command:
- Confirm that the file is not in use.
- Confirm that you have the proper permissions.
If the problem is not resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: File path
-
KAPM15555-W
Deletion of a directory failed. (directory name = aa...aa)
[Action]
Deletion of a temporary directory used by this command failed.
Confirm the following points, manually delete the directory, and then re-execute the command:
- Confirm that the directory is not in use.
- Confirm that you have the proper permissions.
If the problem is not resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Directory path
-
KAPM15556-W
Creation of a directory failed. (directory name = aa...aa)
[Action]
Creation of a temporary directory used by this command failed.
Confirm the point below, manually delete the directory, and then re-execute the command. If the problem is not resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
- Confirm that you have the proper permissions.
aa...aa: Directory path
-
KAPM15557-E
The configuration of the product when it was backed up is different from the configuration of the product in the current environment.
[Action]
The configuration of the product when it was backed up is different from the configuration of the product in the current environment.
Make the configuration of the product being restored to the same as the configuration of the product when it was backed up, and then re-execute the command.
If the problem is not resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15560-I
The host name was changed successfully. (before = aa...aa, after = bb...bb)
[Action]
The host name was changed successfully.
aa...aa: Host name before change
bb...bb: Host name after change
-
KAPM15561-I
The set host name will now be displayed. (host name = aa...aa)
[Action]
The set host name will now be displayed. (host name = aa...aa)
aa...aa: Host name
-
KAPM15562-E
One or more arguments are invalid.
[Action]
One or more arguments are invalid.
Confirm that the arguments exist.
-
KAPM15563-E
The specified host name is invalid.
[Action]
The specified host name is invalid.
Revise the specified host name.
-
KAPM15564-E
The configuration file could not be accessed.
[Action]
The configuration file could not be accessed.
Confirm the following:
- The httpsd.conf file exists.
- The httpsd.conf file is not in use.
- The httpsd.conf file creation directory is appropriate.
-
KAPM15565-E
The configuration file format is invalid.
[Action]
The configuration file format is invalid.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15566-E
An unexpected error occurred.
[Action]
An unexpected error occurred.
Retry the operation. If the problem is not resolved, a detailed investigation is required to determine the cause and resolve the problem.
Collect failure information, and then contact the Support Center.
-
KAPM15567-E
An attempt to acquire the installation path has failed.
[Action]
An attempt to acquire the installation path has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15568-E
A memory allocation error occurred.
[Action]
A memory allocation error occurred.
Retry the operation. If the problem is not resolved, a detailed investigation is required to determine the cause and resolve the problem.
Collect failure information, and then contact the Support Center.
-
KAPM15569-E
An attempt to output a file has failed.
[Action]
An attempt to output a file has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15570-E
Log initialization failed.
[Action]
Log initialization failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15580-E
One or more arguments are invalid.
[Action]
One or more arguments are invalid.
Confirm that the arguments exist.
-
KAPM15581-E
An unexpected error occurred.
[Action]
An unexpected error occurred.
Retry the operation. If the problem is not resolved, a detailed investigation is required to determine the cause and resolve the problem.
Collect failure information, and then contact the Support Center.
-
KAPM15582-E
An attempt to acquire the installation path has failed.
[Action]
An attempt to acquire the installation path has failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15583-E
A memory allocation error occurred.
[Action]
A memory allocation error occurred.
Retry the operation. If the problem is not resolved, a detailed investigation is required to determine the cause and resolve the problem.
Collect failure information, and then contact the Support Center.
-
KAPM15584-E
Log initialization failed.
[Action]
Log initialization failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15585-E
The service will not be stopped because the status of the service could not be confirmed. (service name = aa...aa)
[Action]
The service will not be stopped because the status of the service could not be confirmed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Displayed service name
-
KAPM15586-E
The service will not be started because the status of the service could not be confirmed. (service name = aa...aa)
[Action]
The service will not be started because the status of the service could not be confirmed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Displayed service name
-
KAPM15587-E
Acquisition of the displayed service name failed. (service name = aa...aa)
[Action]
Acquisition of the displayed service name failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Service name
-
KAPM15588-E
The Win32API has failed. API name=aa...aa, error code=bb...bb
[Action]
An error has occurred in WIN32API.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Name of the WIN32API
bb...bb: Results of GetLastError()
-
KAPM15608-I
JDK currently being used: aa...aa [bb...bb]
[Action]
Indicates the JDK currently being used.
aa...aa: JDK type
aa...aa: JDK install path
-
KAPM15609-W
An attempt to get the symbolic link information failed.
[Action]
An attempt to get the symbolic link information failed.
-
KAPM15610-E
Execution of the readlink function failed. (error code = aa...aa)
[Action]
Execution of the readlink function failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: error code
-
KAPM15611-E
Addition of a parameter to the sysconf.cfg file failed.
[Action]
Addition of a parameter to the sysconf.cfg file failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15612-E
The JDK version check failed. (version = aa...aa)
[Action]
The JDK version check failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Version
-
KAPM15613-E
Information about supported JDK versions could not be acquired.
[Action]
Information about supported JDK versions could not be acquired.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15614-E
Execution of the aa...aa function failed. (error code = bb...bb)
[Action]
Execution of the aa...aa function failed.
To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: Function name
bb...bb: Error code
-
KAPM15620-I
The method has started.
[Action]
The method has started.
-
KAPM15621-I
The method has finished.
[Action]
The method has finished.
-
KAPM15622-I
The hcmdsdbrepair command has started.
[Action]
The hcmdsdbrepair command has started.
-
KAPM15623-I
The hcmdsdbrepair command has finished.
[Action]
The hcmdsdbrepair command has finished.
-
KAPM15624-E
The hcmdsdbrepair command cannot be executed in a standby system. Execute this command in an online system.
[Action]
The hcmdsdbrepair command cannot be executed in a standby system. Please execute this command in an online system.
Execute this command in an online system.
-
KAPM15625-E
The value of hcmds.home could not be acquired.
[Action]
The value of hcmds.home could not be acquired.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15626-E
An option is invalid.
[Action]
An option is invalid.
Specify a valid option, and then re-execute the command.
-
KAPM15627-E
No value has been specified for an option.
[Action]
No value has been specified for an option.
Specify a valid option, and then re-execute the command.
-
KAPM15628-E
The backup data is invalid.
[Action]
The backup data is invalid.
Specify valid backup data, and then re-execute the command.
-
KAPM15629-E
A fatal error occurred.
[Action]
A fatal error occurred.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15630-I
The parameter definition file has been backed up.
[Action]
The parameter definition file has been backed up.
-
KAPM15631-I
The backup file of the parameter definition file has been deleted.
[Action]
The backup file of the parameter definition file has been deleted.
-
KAPM15632-E
An attempt to execute the aa...aa command has failed.
[Action]
An attempt to execute the command has failed.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: command name
-
KAPM15633-E
An attempt to acquire the key name has failed.
[Action]
An attempt to acquire the key name has failed.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15634-E
An attempt to acquire a value has failed.
[Action]
An attempt to acquire a value has failed.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15635-E
HiRDB has not been set up.
[Action]
HiRDB has not been set up.
-
KAPM15636-E
The backup data format contains an error. (target data = aa...aa)
[Action]
The backup data format contains an error.
Specify valid backup data, and then re-execute the command.
aa...aa: target data
-
KAPM15637-E
An attempt to extract the archive file has failed.
[Action]
An attempt to extract the archive file has failed.
Specify valid backup data, and then re-execute the command.
-
KAPM15638-E
Processing cannot be continued because the backed-up product data is insufficient.
[Action]
Processing cannot be continued because the backed-up product data is insufficient.
Specify other backup data that contains the backup data of the installed product, and then re-execute the command.
-
KAPM15639-W
The installed product and backed-up product versions do not match.
[Action]
The installed product and backed-up product versions do not match.
-
KAPM15640-W
If you continue, the database might become corrupted. Do you want to continue? (y/n) [default=n]
[Action]
If processing continues, the database might become corrupted.
Cancel processing if database corruption is a problem. Continue processing only if database corruption is not a problem.
-
KAPM15641-W
Are you sure you want to continue? (y/n) [default=n]
[Action]
If processing continues, the database might become corrupted.
Cancel processing if database corruption is a problem. Continue processing only if database corruption is not a problem.
-
KAPM15642-E
An exception occurred.
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15643-I
The unsetup operation has started.
[Action]
The unsetup operation has started.
-
KAPM15644-I
The unsetup operation has ended.
[Action]
The unsetup operation has ended.
-
KAPM15645-I
Setup has started.
[Action]
Setup has started.
-
KAPM15646-I
Setup has ended.
[Action]
Setup has ended.
-
KAPM15647-E
The aa...aa file was not found.
[Action]
The file was not found.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: file name
-
KAPM15648-E
The aa...aa file could not be read.
[Action]
The file could not be read.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: file name
-
KAPM15649-E
The aa...aa directory could not be deleted.
[Action]
The directory could not be deleted.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: directory name
-
KAPM15650-E
You cannot continue because the parameter definition file is insufficient.
[Action]
You cannot continue because the parameter definition file is insufficient.
-
KAPM15651-W
Processing of the hcmdsdbrepair command was interrupted.
[Action]
Processing of the hcmdsdbrepair command was interrupted.
-
KAPM15652-I
Version information is output. (product name = aa...aa, installed product version = bb...bb, backup data version = cc...cc)
[Action]
Version information is output.
aa...aa: product name
bb...bb: installed product version
cc...cc: backup data version
-
KAPM15653-E
The unsetup operation on the database has failed.
[Action]
The unsetup operation on the database has failed.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15655-E
Starting of the HiRDB service has failed.
[Action]
Starting of the HiRDB service has failed.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15656-I
Data import was successful.
[Action]
Data import was successful.
-
KAPM15657-E
An attempt to re-create the database has failed.
[Action]
An attempt to re-create the database has failed.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15658-E
An attempt to import data has failed.
[Action]
An attempt to import data has failed.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15659-E
The data to be imported was not found in the specified directory. (product name = aa...aa)
[Action]
The data to be imported was not found in the specified directory.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: product name
-
KAPM15660-I
Processing ended normally.
[Action]
Processing ended normally.
-
KAPM15661-E
An attempt to clear a DBMS environment variable has failed.
[Action]
An attempt to clear a DBMS environment variable has failed.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15662-E
An attempt to stop the service or the DBMS has failed.
[Action]
An attempt to stop the service or the DBMS has failed.
Execute the hcmdssrv command to stop all services before executing the hcmdsdbrepair command. If the services do not stop, collect troubleshooting information and contact the support center.
-
KAPM15663-E
An internal error occurred.
[Action]
An internal error occurred.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15664-E
The "bb...bb" file to be used by "aa...aa" does not exist.
[Action]
The required file does not exist.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: function name
bb...bb: file name
-
KAPM15665-E
An attempt to write to the file has failed. (file name = aa...aa)
[Action]
An attempt to write to the file has failed.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: file name
-
KAPM15667-I
The value of parameter aa...aa is bb...bb.
[Action]
The value of the parameter is output.
aa...aa: parameter name
bb...bb: value
-
KAPM15720-E
An exception occurred.
[Action]
An exception occurred.
To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15723-I
The hcmdsdbuser command will now start.
[Action]
The hcmdsdbuser command will now start.
-
KAPM15724-I
The command hcmdsdbuser will now finish.
[Action]
The command hcmdsdbuser will now finish.
-
KAPM15726-E
An option is invalid.
[Action]
An option is invalid.
Specify valid options.
-
KAPM15727-E
The command cannot be executed because the database is down.
[Action]
The command cannot be executed because the database is down.
Make sure of the following, and then retry the command:
- Make sure that HiRDB is running.
- Make sure that HiRDB has been set up.
-
KAPM15728-E
hcmds.home is not specified in the Java system properties.
[Action]
hcmds.home is not specified in the Java system properties.
To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15729-E
An error occurred during reading of a library. library path = aa...aa
[Action]
An error occurred during reading of a library.
To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: library path
-
KAPM15730-E
The system environment is invalid.
[Action]
The system environment is invalid.
To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15731-E
An error occurred in an internal function. (function = aa...aa, error code = bb...bb)
[Action]
An error occurred in an internal function.
Retry. If you cannot resolve the problem, collect maintenance information, and then contact the Support Center.
aa...aa: Function
bb...bb: Error code
-
KAPM15732-E
A file was not found. (file name = aa...aa)
[Action]
A file was not found.
To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM15733-E
An attempt to access the file has failed. (file name = aa...aa)
[Action]
An attempt to access the file has failed.
Retry. If you cannot resolve the problem, collect maintenance information, and then contact the Support Center.
aa...aa: File name
-
KAPM15748-E
The file format is invalid. (file name = aa...aa)
[Action]
The file format is invalid.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM15749-E
An attempt to output a file failed. (file path = aa...aa)
[Action]
An attempt to output a file failed.
Retry execution. If you cannot resolve the problem, collect maintenance information, and then contact the Support Center.
aa...aa: File path
-
KAPM15750-I
The command was executed successfully.
[Action]
The command was executed successfully.
-
KAPM15751-E
Command execution failed.
[Action]
Command execution failed.
If a KAPMxxxxx-E message was output before this one, see the message.
If a KAPMxxxxx-E message was not output before this one, collect maintenance information, and then contact the Support Center.
-
KAPM15752-I
The database user authentication information will now be changed. (type = aa...aa)
[Action]
The database user authentication information will now be changed.
aa...aa: Program type
-
KAPM15753-I
The database user authentication information will now be restored to default. (type = aa...aa)
[Action]
The database user authentication information will now be restored to default.
aa...aa: Program type
-
KAPM15754-I
The database user authentication information will now be reset. (type = aa...aa)
[Action]
The database user authentication information will now be reset.
aa...aa: Program type
-
KAPM15755-E
An attempt to execute JNI failed.
[Action]
An attempt to execute JNI failed.
Retry execution. If you cannot resolve the problem, collect maintenance information, and then contact the Support Center.
-
KAPM15756-E
An error occurred during file I/O processing.
[Action]
An error occurred during file I/O processing.
Retry execution. If you cannot resolve the problem, collect maintenance information, and then contact the Support Center.
-
KAPM15757-I
Registration processing was successful. (target = aa...aa, return code = bb...bb)
[Action]
Registration processing was successful.
aa...aa: Information for processing
bb...bb: Return code
-
KAPM15758-I
Deletion processing was successful. (target = aa...aa, return code = bb...bb)
[Action]
Deletion processing was successful.
aa...aa: Information for processing
bb...bb: Return code
-
KAPM15759-E
An error occurred during access to the DBMS.
[Action]
An error occurred during access to the DBMS.
Perform the following:
1) Re-execute the command.
2) If Common Component authentication information failed to be changed, specify the value you entered for newid when the failure occurred for both oldid and newid. Similarly, specify the value you entered for newpass for both oldpass and newpass.
3) If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15760-E
An error occurred during access to the DBMS. (error code = aa...aa)
[Action]
An error occurred during access to the DBMS.
Perform the following:
1) Re-execute the command.
2) If Common Component authentication information failed to be changed, specify the value you entered for newid when the failure occurred for both oldid and newid. Similarly, specify the value you entered for newpass for both oldpass and newpass.
3) If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error code
-
KAPM15765-E
The ID or password is invalid.
[Action]
The ID or password is invalid.
Perform the following:
1) Confirm that the specified ID and password are correct.
2) Confirm that the ID and password do not contain any invalid characters.
3) Confirm that the ID and password do not exceed the maximum length.
4) If you specified an ID and password other than a Common Component ID and password, use the hcmdsdbuser command to set up Common Component.
5) If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15766-E
The ID or password is invalid. (error code = aa...aa)
[Action]
The ID or password is invalid.
Perform the following:
1) Confirm that the specified ID and password are correct.
2) Confirm that the ID and password do not contain any invalid characters.
3) Confirm that the ID and password do not exceed the maximum length.
4) If you specified an ID and password other than a Common Component ID and password, use the hcmdsdbuser command to set up Common Component.
5) If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Error code
-
KAPM15767-I
Common Component is set to the default settings.
[Action]
Common Component is set to the default settings.
-
KAPM15768-I
Common Component is not set to the default settings.
[Action]
Common Component is not set to the default settings.
-
KAPM15769-E
The specified ID cannot be used, because it is reserved.
[Action]
The specified ID cannot be used, because it is reserved.
Specify a different ID, and then try again.
-
KAPM15770-I
Confirm that the Common Component settings are the default settings.
[Action]
Confirm that the Common Component settings are the default settings.
-
KAPM15781-E
A fatal error occurred.
[Action]
A fatal error occurred.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15782-E
The specified argument is invalid.
[Action]
The specified argument is invalid.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15783-I
The specified string contains one or more invalid characters.
[Action]
The specified string contains one or more invalid characters.
-
KAPM15784-I
The command ended normally.
[Action]
The command ended normally.
-
KAPM15785-E
The specified string contains an invalid character.
[Action]
The invalid letter is included in the specified string.
Specified a valid string, and then re-execute the command.
-
KAPM15792-E
An option is invalid.
[Action]
An option is invalid.
Specify valid options.
-
KAPM15793-E
An internal error occurred.
[Action]
An internal error occurred.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15794-E
The file format is invalid.
[Action]
The file format is invalid.
To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
-
KAPM15800-I
The size of the work area was successfully changed.
[Action]
The size of the work area was successfully changed.
-
KAPM15801-I
The size of the system file area was successfully changed.
[Action]
The size of the system file area was successfully changed.
-
KAPM15802-I
Are you sure you want to execute the hcmdsdbchgwork command? (Y/N)
[Action]
This message is output to confirm that you want to execute the command.
-
KAPM15804-I
The size of the work area is aa...aa.
[Action]
This message outputs the current size of the work area.
aa...aa: Set size
-
KAPM15805-I
The size of the system file area is aa...aa.
[Action]
This message outputs the current size of the system file area.
aa...aa: Set size
-
KAPM15808-I
The command will now be executed. (specified command = aa...aa)
[Action]
The command is executed.
aa...aa: Specified command
-
KAPM15810-I
The size of the work area will now be changed.
[Action]
The size of the work area will now be changed.
-
KAPM15811-I
The size of the system file area will now be changed.
[Action]
The size of the system file area will now be changed.
-
KAPM15812-I
Change processing completed.
[Action]
Change processing completed.
-
KAPM15813-I
The service and database were stopped.
[Action]
The service and database were stopped.
-
KAPM15814-I
The HiRDB service was successfully stopped.
[Action]
The HiRDB service was successfully stopped.
-
KAPM15815-I
bb...bb was set for the aa...aa key in the hcmdsdbchgwork_setting file.
[Action]
A value was set in the hcmdsdbchgwork_setting file.
aa...aa: Key name
bb...bb: Set value
-
KAPM15816-I
The hcmdsdbchgwork_setting file was created.
[Action]
The hcmdsdbchgwork_setting file was created.
-
KAPM15820-E
HiRDB is not set up.
[Action]
The command cannot be executed because HiRDB is not set up.
Check the HiRDB setup status.
-
KAPM15821-E
The HiRDB setup status is "Standby".
[Action]
The HiRDB setup status is "Standby".
Execute the command from a stand-alone or active system.
-
KAPM15822-E
Stopping of the service or database failed.
[Action]
Stopping of the service or database failed.
Wait a while, execute the hcmdssrv command with the stop option, and then confirm that both the service and HiRDB stopped properly. If the problem persists, to determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15823-E
An internal error occurred.
[Action]
An internal error occurred.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15824-E
An unexpected exception occurred.
[Action]
An unexpected exception occurred.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15825-E
Starting of the HiRDB service failed.
[Action]
Starting of the HiRDB service failed.
Wait a while, execute the hcmdssrv command with the stop option, and then confirm that both the service and HiRDB stopped properly. If the problem persists, to determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15826-E
Stopping of the HiRDB service failed.
[Action]
Stopping of the HiRDB service failed.
Wait a while, execute the hcmdssrv command with the stop option, and then confirm that both the service and HiRDB stopped properly. If the problem persists, to determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15827-E
Reading of the configuration file failed.
[Action]
Reading of the configuration file failed.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15828-E
One or more command options are invalid.
[Action]
One or more command options are invalid.
Specify valid options, and then re-execute the command.
-
KAPM15829-E
A user operation interrupted the command execution.
[Action]
Another user operation interrupted the command execution.
To execute the command, enter Y for the KAPM15802-I message.
-
KAPM15830-E
hcmdsdbchgwork command execution failed.
[Action]
hcmdsdbchgwork command execution failed.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15831-E
Command execution failed. (return code = aa...aa)
[Action]
Command execution failed.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: Return code
-
KAPM15832-E
An invalid value is set in the aa...aa file.
[Action]
An invalid value is set in the file.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
aa...aa: File name
-
KAPM15833-E
An exception occurred during command execution.
[Action]
An exception occurred during command execution.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM15834-E
No command arguments are specified.
[Action]
No command arguments are specified.
To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
-
KAPM49001-E
aa...aa
[Action]
Detailed information for KAPMxxxxx-E. This indicates the thrown exception object and the backtrace for that object.
See the message KAPMxxxxx-E.
aa...aa: Name of the exception object and the reason that object was thrown, or the backtrace for that object