1.3.2 Detailed information about communications errors
Some messages may output detailed information in the message text. The table below lists the detailed information numbers displayed in communications error messages such as KAVB1200-E, and describes the cause and the corrective action to take when the message is displayed.
Detailed information for communications error messages
The following table shows detailed information, the cause, and the corrective action to take.
Detailed information |
Cause |
Corrective action |
---|---|---|
B00 |
The manager host on which JP1/IM - Manager operates cannot be reached from JP1/IM - View. |
Check the network configuration. |
B01 |
JP1/IM - Manager is not running. |
Check whether JP1/IM - Manager has started. |
B04 |
The host name cannot be resolved. |
Check the network configuration. |
B06 |
The host name cannot be resolved. |
Check the network configuration. |
B32 |
A timeout occurred between JP1/IM - View and JP1/IM - Manager. |
Increase the value set to SO_TIMEOUT. |
H00 |
The host name cannot be resolved. |
Check the network configuration. |
H01 |
A connection cannot be established through the specified port. |
Check the port settings. |
H02 |
A connection cannot be established to JP1/IM - Manager. |
Check whether the host on which JP1/IM - Manager operates has started. |
H03 |
The manager host on which JP1/IM - Manager operates cannot be reached from JP1/IM - View. |
Check the network configuration. |
Other than above |
-- |
For the displayed message, perform the action indicated under O. |
- Legend:
-
--: Not applicable