ノンストップデータベース HiRDB Version 10 コマンドリファレンス(UNIX(R)用)
目次
索引
前へ
24 / 904
次へ
表紙
2. 運用コマンド
この章では,運用コマンドの文法について説明します。
2.1 pdacunlck(連続認証失敗アカウントロック状態の解除)
2.2 pdadmvr(HiRDBの製品情報の取得)
2.3 pdaudatld(監査証跡表の自動データロード機能の制御)
2.4 pdaudbegin(監査証跡の取得開始)
2.5 pdaudend(監査証跡の取得停止)
2.6 pdaudrm(閉塞中の監査証跡ファイルの削除)
2.7 pdaudswap(現用の監査証跡ファイルのスワップ)
2.8 pdbkupls(バックアップファイルの情報表示)
2.9 pdbufls(グローバルバッファ情報の表示)
2.10 pdbufmod(グローバルバッファの動的変更)
2.11 pdcancel(UAP,ユティリティ処理の強制終了)
2.12 pdcat(ファイルの内容表示)
2.13 pdcat【-d sts】(ステータスファイルの内容表示)
2.14 pdcat【-d省略】(メッセージログファイルの内容表示)
2.15 pdchgconf(システム構成変更コマンド)
2.16 pdchpathf(ファイルパス変更オフラインコマンド)
2.17 pdchpathn(ファイルパス変更オンラインコマンド)
2.18 pdchprc(サーバプロセスの起動本数変更)
2.19 pdclibsync(Cライブラリファイルの操作)
2.20 pdclose(RDエリアのクローズ)
2.21 pdclttrc(SQLトレースの動的取得)
2.22 pdcmdact(HiRDB管理者以外のユーザによるコマンド実行)
2.23 pdcmdls(コマンドの実行権限表示)
2.24 pdcmdset(コマンドの実行権限変更)
2.25 pdcmt(トランザクションのコミット)
2.26 pdconfchk(システム定義のチェック)
2.27 pdcspool(トラブルシュート情報及び作業用一時ファイルの削除)
2.28 pddbchg(レプリカRDエリアのレプリカステータスの切り替え)
2.29 pddbfrz(ユーザLOB用RDエリアの満杯HiRDBファイルの更新凍結)
2.30 pddbls(RDエリアの状態表示)
2.31 pddefrev(定義系SQLの生成)
2.32 pddivinfgt(表の分割条件の取得及び出力)
2.33 pdextfunc(拡張システム定義スカラ関数の定義,削除)
2.34 pdfbkup(HiRDBファイルシステムのバックアップ)
2.35 pdfchfs(HiRDBファイルシステム領域の管理情報変更)
2.36 pdffsck(HiRDBファイルシステム領域の整合性の検証及び修復)
2.37 pdfgt(トランザクションの強制終了)
2.38 pdfls(HiRDBファイルシステムの内容表示)
2.39 pdfmkfs(HiRDBファイルシステム領域の初期設定)
2.40 pdfrm(HiRDBファイルの削除)
2.41 pdfrstr(HiRDBファイルシステムのリストア)
2.42 pdfssync(HiRDBファイルシステム領域の同期実行)
2.43 pdfstatfs(HiRDBファイルシステム領域の状態表示)
2.44 pdfzeroinit(HiRDBファイルシステム領域内の使用済み領域の初期化)
2.45 pdgeter(障害情報の取得)
2.46 pdhold(RDエリアの閉塞)
2.47 pdinfoget(障害情報の取得と容量見積もり)
2.48 pdinfocoreget(coreファイルの取得と容量見積もり)
2.49 pditvstop(HiRDBの状態の定期取得停止)
2.50 pditvtrc(HiRDBの状態の定期取得)
2.51 pdjarsync(JARファイルの操作)
2.52 pdlistls(リスト定義情報の表示)
2.53 pdlogadpf(ログ関係のファイルの割り当て)
2.54 pdlogatul(自動ログアンロード機能の制御)
2.55 pdlogchg(ログ関係のファイルのステータス変更)
2.56 pdlogcls(ログ関係のファイルのクローズ)
2.57 pdloginit(ログ関係のファイルの初期設定)
2.58 pdlogls(ログ関係のファイルの情報表示)
2.59 pdlogls【-d spd】(シンクポイントダンプファイルの情報表示)
2.60 pdlogls【-d sys】(システムログファイルの情報表示)
2.61 pdlogopen(ログ関係のファイルのオープン)
2.62 pdlogrm(ログ関係のファイルの削除)
2.63 pdlogswap(ログ関係のファイルのスワップ)
2.64 pdlogsync(シンクポイントダンプの取得)
2.65 pdlogucat(アンロードログファイルの情報表示)
2.66 pdlogunld(ログ関係のファイルのアンロード)
2.67 pdls(HiRDBシステムの状態表示)
2.68 pdls【-d act】(ユーザの状態表示)
2.69 pdls【-d aud】(監査証跡ファイルの状態表示)
2.70 pdls【-d ha】(HiRDBの系の状態表示)
2.71 pdls【-d lck】(サーバの排他制御の状態表示)
2.72 pdls【-d mem】(サーバの共用メモリの状態表示)
2.73 pdls【-d org】(オンライン再編成の追い付き反映の経過情報)
2.74 pdls【-d prc】(サーバのプロセスの状態表示)
2.75 pdls【-d ris】(ログ適用処理の実行状況の表示)
2.76 pdls【-d rpc】(サーバの通信制御情報の表示)
2.77 pdls【-d rpl】(HiRDB Datareplicator連携の状態表示)
2.78 pdls【-d scd】(サーバのスケジュールの状態表示)
2.79 pdls【-d stj】(ユニット及びサーバごとの統計情報出力種別の指定有無の表示)
2.80 pdls【-d sts】(ステータスファイルの状態表示)
2.81 pdls【-d svr】(ユニット及びサーバの状態表示)
2.82 pdls【-d trn】(サーバのトランザクションの状態表示)
2.83 pdls【-d ust】(ユニットの稼働状態の表示)
2.84 pdmemdb(インメモリデータ処理に関するコマンド)
2.85 pdmemsv(メモリの削減)
2.86 pdmstchk(マスタディレクトリ用RDエリアの整合性チェック)
2.87 pdobils(SQLオブジェクト用バッファの統計情報表示)
2.88 pdobjconv(64ビットモードのHiRDBへのSQLオブジェクトの移行)
2.89 pdopen(RDエリアのオープン)
2.90 pdopsetup(付加PPのセットアップ)
2.91 pdorbegin(オンライン再編成のデータベース静止化)
2.92 pdorcheck(オンライン再編成の適用条件チェック)
2.93 pdorchg(オンライン再編成のカレントRDエリアの切り替え)
2.94 pdorcreate(オンライン再編成の追い付き反映環境の作成)
2.95 pdorend(オンライン再編成の追い付き反映)
2.96 pdparaload(パラレルローディング)
2.97 pdpfresh(サーバプロセスのリフレッシュ)
2.98 pdplgrgst(プラグインの登録・削除)
2.99 pdplgset(プラグインのセットアップ)
2.100 pdprfed(PRFトレース情報の編集出力)
2.101 pdprflevel(PRFトレース取得レベルの表示,変更)
2.102 pdprgcopy(修正版HiRDBのコピー)
2.103 pdprgrenew(修正版HiRDBの入れ替え)
2.104 pdrbk(トランザクションのロールバック)
2.105 pdrdconstck(インナレプリカグループ内のRDエリアの整合性チェック)
2.106 pdrdrefls(関連するRDエリアの情報の表示)
2.107 pdrels(RDエリアの閉塞解除)
2.108 pdrisechk(リアルタイムSANレプリケーションの構成確認)
2.109 pdrisedbto(リアルタイムSANレプリケーションのデータベース引き継ぎ)
2.110 pdriseset(リアルタイムSANレプリケーションのサイト状態の設定)
2.111 pdrpause(プロセスサーバプロセスの再起動)
2.112 pdrplstart(HiRDB Datareplicator連携の開始)
2.113 pdrplstop(HiRDB Datareplicator連携の終了)
2.114 pdsetenv(HiRDBユニットの環境設定)
2.115 pdsetup(HiRDBシステムのOSへの登録・削除)
2.116 pdstart(HiRDBシステム・ユニット・サーバの開始)
2.117 pdstbegin(統計情報の出力開始)
2.118 pdstend(統計情報の出力停止)
2.119 pdstjswap(統計ログファイルの切り替え)
2.120 pdstjsync(統計ログファイルへの統計ログバッファの反映)
2.121 pdstop(HiRDBシステム・ユニット・サーバの終了)
2.122 pdstscls(ステータスファイルのクローズ)
2.123 pdstsinit(ステータスファイルの初期設定)
2.124 pdstsopen(ステータスファイルのオープン)
2.125 pdstsrm(ステータスファイルの削除)
2.126 pdstsswap(ステータスファイルのスワップ)
2.127 pdsvhostname(サーバのホスト名表示)
2.128 pdtrndec(未決着トランザクションの強制自動決着)
2.129 pdtrnqing(トランザクションキューイング機能の開始,解除)
2.130 pdvrup(HiRDBバージョンアップ)
ページの先頭へ