The required memory used by HiRDB/Single Server is the sum of all the terms shown in the following table.

Table 15-2 Size of memory required for a HiRDB/Single Server

Item			Required memory (KB)
Process private area	Process private area used by all unit controller processes		32-bit mode E + {(64 + 48 x (u + 1)) x (value of pd_max_server_process - b - 3) + w } 1,024 64-bit mode E + {(64 + 64 x (u + 1)) x (value of pd_max_server_process - b - 3) + w } 1,024 When using plug-ins, add: + 1,400 When using the asynchronous READ facility, add: + r When fixed was specified in the pd_process_terminator operand, add: + F x (value of pd_process_terminator_max - 1) When performing in-memory data processing, add: + {K x (value of pd_max_users x 2 + 7)} 1,024 When changing the maximum number of communication traces stored, add: + M 1,024
	Process private area used by single server process#1	pd_work_buff_ mode=each specified	32-bit mode {G + g + (a + 9) x c + h + i + m + p + q + s}x (b + 3) + (64 + 48 x (b + 1)) 1,024 x (v + 3) + J 64-bit mode {G + g + (a + 9) x c + h + i + m + p + q + s} x (b + 3) + (64 + 64 x (b + 1)) 1,024 x (v + 3) + J When performing in-memory data processing, add: + {K x (value of pd_max_users + 3)} 1,024 When changing the maximum number of communication traces stored, add: + P 1,024
		pd_work_buff_ mode=pool specified or omitted	32-bit mode (G + g + a + 9 + a 128 x 0.1 + 11 + h + i + m + p + q + s) x (b + 3) + n + (64 + 48 x (b + 1)) 1,024 x (v + 3) + J 64-bit mode (G + g + a + 9 + a 128 x 0.1 + 15 + h + i + p + q + s) x (b + 3) + n + (64 + 64 x (b + 1)) 1,024 x (v + 3) + J When performing in-memory data processing, add: + {K x (value of pd_max_users + 3)} 1,024 When changing the maximum number of communication traces stored, add: + P 1,024
Shared memory	Space used by the unit controller in the unit controller shared memory		d 1,024
	Space used by the Single Server in the unit controller shared memory		E
	Global buffer shared memory		F
	In-memory data processing shared memory		L
	Utility shared memory		T
	Security audit information buffer shared memory		For automatic calculation by the system: 0.3 + MAX{(H + 100), (H x 1.2)} x 0.25 For user -specified values (specify the pd_audit_def_buffer_size operand): Value specified for pd_audit_def_buffer_size
	Inter-process memory communication shared memory#2		j x k

#1: If you are using plug-ins, add 300 per single server process.

#2: Add this value if you have specified PDIPC=MEMORY in the client environment definition. For details about the inter-process memory communication facility and client environment definitions, see the HiRDB Version 9 UAP Development Guide. If either the HiRDB server or the HiRDB client is in 32-bit mode, the system allocates the shared memory for the inter-process memory communication facility in the 32-bit address space.

a: Value of pd_work_buff_size operand

b: Value of pd_max_users operand

c: Maximum number of work tables

Obtain the number of work tables for each SQL statement from Table 15-3 Procedure for obtaining the number of work tables for each SQL statement. Use the largest value obtained from Table 15-3 as the maximum number of work tables.

d: Value obtained from 15.1.3 Formulas for shared memory used by a unit controller.

e: Value obtained from 15.1.4 Formulas for shared memory used by a single server.

f: Value obtained from 15.1.5 Formula for size of shared memory used by global buffers.

g: Size of memory required during SQL execution

For details about the formula, see 15.1.6 Formulas for size of memory required during SQL execution.

h: Size of memory required during SQL preprocessing

For details about the formula, see 15.1.7 Formula for size of memory required during SQL preprocessing.

i: LOB buffer batch input/output work memory

Add 62 KB if a LOB global buffer is specified in the global buffer definition (-b specified in the pdbuffer operand of the system common definition).

j: Maximum number of concurrently executable clients that use the inter-process memory communication facility.

If you are not sure about the value, specify the number of all clients that use the inter-process memory communication facility or the value of the pd_max_users operand.

k: Average memory size for data transfer performed by all clients that use the inter-process memory communication facility (value of PDSENDMEMSIZE + value of PDRECVMEMSIZE in the client environment definition).

m: Memory requirement for Java virtual machine

If you use Java stored procedures or Java stored functions, add the size of memory used by the Java virtual machine. This value depends on the Java virtual machine's options and version. For details about the memory requirement for your Java virtual machine, see the applicable manual.

n: Work table extended memory size

When the pd_work_buff_expand_limit operand is specified, add the work table extended memory size. The work table extended memory size is determined from the following formula:

Work table extended memory size (kilobytes) = work table extended buffer size + (work table extended buffer size 128) x 0.1

• Work table extended buffer size (kilobytes) = MAX(0, work table extended buffer size based on hash join, subquery hash execution) + MAX(0, work table extended buffer size based on the increase in the number of work tables)
• Work table extended buffer size based on hash join, subquery hash execution = MIN{ (work table extended buffer size based on hash join, subquery hash execution - value of the pd_work_buff_size operand), (value of the pd_work_buff_expand_limit operand - value of the pd_work_buff_size operand) } x number of concurrently executing users executing hash join, subquery hash execution
  For details about determining the work table extended buffer size when executing hash join, subquery hash execution, see the HiRDB Version 9 UAP Development Guide.
  
• Work table extended buffer size based on the increase in the number of work tables = MIN{ (number of work tables used x 128 - value of the pd_work_buff_size operand), (value of pd_work_buff_expand_limit operand - value of pd_work_buff_size operand) }x(number of users such that the number of work tables is greater than the value of the pd_work_buff_size operand 128)
  Number of work tables used = MAX(number of work table files used per SQL statement, number of work table files used by the ASSIGN LIST statement)
  For details about determining the number of work table files used per SQL statement and the number of work table files used by the ASSIGN LIST statement, see 18.3 Determining the maximum number of files (pdfmkfs -l command).
  

p: Memory requirements required for BLOB data type

For details about the formula, see 15.1.8 Formula for size of memory required during BLOB data retrieval or updating (HiRDB/Single Server).

q: Memory requirements required for server-side block transfer or array FETCH

For details about the formula, see 15.1.9 Formula for size of memory required during block transfer or array FETCH.

r: Memory size used by asynchronous READ

This is applicable when the asynchronous READ facility is used; use the following formula (in kilobytes) for the calculation:

(90 + 90 Memory used by the RDAREA for management of the HiRDB file system area) i=1 x value of pd_max_ard_process

For the memory used by the RDAREA for management of the HiRDB file system area, use 90 areas as the maximum in the calculation. If the number of areas used by the server is fewer than 90, assume that amount anyway.

The memory used by the RDAREA for management of the HiRDB file system area (in kilobytes) is calculated from the following formula based on the initial settings:

{(Number of files#1 + number of extensions#2) 64} x 1.5#3

#1: Value specified by pdfmkfs -l.

#2: Value specified by pdfmkfs -e.

#3: Multiply when the area size (value specified in pdfmkfs -n) is at least 2,048.

s: HiRDB file system memory size

Determine with the following formula (in kilobytes):

347 + Memory used by the work tables for management of the HiRDB file system area + Memory used by the system logs for management of the HiRDB file system area + 90 Memory used by the RDAREA for management of the HiRDB file system area i=1

The memory used by the HiRDB file system area for management of work tables and system logs uses the maximum value calculated for the memory used by the HiRDB file system area for management used by the server. For RDAREAs, use 90 areas as the maximum calculation value. If the number of areas used by the server is fewer than 90, assume that amount anyway.

The memory used by the RDAREA for management of the HiRDB file system area (in kilobytes) is calculated with the following formula based on the initial settings:

{(Number of files#1 + number of extensions#2) 64} x 1.5#3

#1: Value specified by pdfmkfs -l.

#2: Value specified by pdfmkfs -e.

#3: Multiply when the area size (value specified in pdfmkfs -n) is at least 2,048.

t: When value of pd_utl_exec_mode is 0: 0

When value of pd_utl_exec_mode is 1: {(b x 2,000 + 136) 1,024} x 1,024

u: Valid value of pd_module_trace_max for the unit control information definition

v: Valid value of pd_module_trace_max for the single server definition

w: Memory size for restarting HiRDB

If this memory size cannot be allocated, HiRDB restart fails. Use the following formula to determine the size (in bytes):

A + B If commit is specified in the pd_dbsync_point operand, add: + 112 x (value of pd_max_users x 2 + 7) If the number of HiRDB file system areas that store RDAREAs created in a HiRDB file system area that uses the raw I/O facility is 1,001 or more, add: + D

Use the following variables in the formula to calculate the size of memory used by HiRDB to restart:

Variable	Value
A	32-bit mode 246,762 + 4 x value of pd_max_rdarea_no + {48 x (value of pd_max_rdarea_no + number of tables) + 304} x (value of pd_max_users x 2 + 7) 64-bit mode 305,274 + 8 x value of pd_max_rdarea_no + {64 x (value of pd_max_rdarea_no + number of tables) + 512} x (value of pd_max_users x 2 + 7) Number of tables: 62 + MAX {value of pd_max_access_tables, 500}
B	b1 x X + b2 x Y b1: When the record length of the server status file < 4,096 MAX(((3,400 ((((record length - 40) - 308) 20) + ((record length - 40) 20) x (MAX(4,096 record length,2) - 1)) + 0.7)),1) x MAX(4,096 record length,2) x (record length - 40) When 4,096 record length of server status file < 12,288 MAX((3,400 ((((record length - 40) - 308) 20)) + 0.7),1) x (record length - 40) When 12,288 record length of server status file MAX((3,400 ((((record length - 40) - 836) 20)) + 0.7),1) x (record length - 40) X: When the number of RDAREAs 3,400: 1 When 3,401 number of RDAREAs 6,800: 2 When 6,801 number of RDAREAs: 3 b2: When the record length of the server status file < 4,096 ((5,662,310 ((((record length - 40) - 308) 20) + ((record length - 40) 20) x (MAX(4,096 record length,2) - 1)) + 0.7)) x MAX(4,096 record length,2) x (record length - 40) When 4,096 record length of server status file < 12,288 (5,662,310 ((((record length - 40) - 308) 20)) + 0.7) x (record length - 40) When 12,288 record length of server status file (5,662,310 ((((record length - 40) - 836) 20)) + 0.7) x (record length - 40) Y: When the number of RDAREAs 10,200: 0 When 10,201 number of RDAREAs 5,672,510: 1 When 5,672,511 number of RDAREAs 11,334,820: 2 When 11,334,821 number of RDAREAs: 3
D	32-bit mode 12,012 x ((number of HiRDB file system areas that store RDAREAs created in a HiRDB file system area that uses the raw I/O facility - 1,000) 1,000) 64-bit mode 16,016 x ((number of HiRDB file system areas that store RDAREAs created in a HiRDB file system area that uses the raw I/O facility - 1,000) 1,000)

E, F, G: Fixed value

These values depend on the OS being used. The following table presents the values for each OS (in kilobytes):

OS	Value of E	Value of F	Value of G
Windows (32-bit mode)	207,100	11,100	14,100
Windows Server 2003 (IPF)	167,000	5,400	11,700
Windows (x64)	155,500	5,200	12,400

H: The number of objects specified in a narrowed search using the security audit facility audit trail

J: Memory required when using the facility for acquiring syncpoint output synchronization control information (bytes)

If 1 is specified in the pd_dbbuff_trace_level operand and the pd_dfw_awt_process operand is omitted, add:

32-bit mode

320 x number of global buffers defined in Single Server

64-bit mode

640 x number of global buffers defined in Single Server

K: If 1 or a greater value is specified in the pd_max_resident_rdarea_no operand, add:

1,648 + 16 x value of pd_max_resident_rdarea_no + 16 x value of pd_max_resident_rdarea_shm_no

L: Memory required by in-memory data processing

For the applicable formulas, see 15.1.10 Memory required by in-memory data processing.

M: Memory required by communication trace processing

32-bit mode

(16 x (N - 1,024) x 2) x (value of pd_max_server_process - value of pd_max_users - 3)

64-bit mode

(32 x (N - 1,024) x 2) x (value of pd_max_server_process - value of pd_max_users - 3)

N: Value of pd_pth_trace_max enabled as unit control information definition

The value specified for the operand rounded up to a power of two.

P: Memory required by communication trace processing

32-bit mode

(16 x (Q - 1,024) x 2) x (value of pd_max_users + 3)

64-bit mode

(32 x (Q - 1,024) x 2) x (value of pd_max_users + 3)

Q: Value of pd_pth_trace_max enabled as a single server definition

The value specified for the operand rounded up to a power of two.

Table 15-3 Procedure for obtaining the number of work tables for each SQL statement

SQL statement	Procedure for obtaining the number of work tables
SELECT statement INSERT(-SELECT) statement	When none of 1-8 as follows are applicable: 0 When any of 1-8 as follows are applicable: Sum of the applicable values from 1-8 When multiple tables are joined for retrieval Number of additional work tables = (Number of joined tables - 1) x 2 + 1 When specifying the ORDER BY clause Number of additional work tables = 2 When specifying the GROUP BY clause Number of additional work tables = Number of GROUP BY clauses specified When specifying the DISTINCT clause Number of additional work tables = Number of DISTINCT clauses specified When specifying the UNION, UNION ALL, or EXCEPT[ALL] clause Number of additional work tables = (Number of UNION or UNION ALL clauses specified) x 2 + 1 When search condition contains columns with index defined Number of additional work tables = Number of columns with index defined in the search condition When specifying the FOR UPDATE or FOR READ ONLY clause Number of additional work tables = 1 When specifying a subquery (quantified predicate) Number of additional work tables = Number of subqueries specified
UPDATE statement DELETE statement	Number of columns with index defined in the search condition + 1
DROP SCHEMA statement DROP TABLE statement DROP INDEX statement CREATE INDEX statement REVOKE statement to revoke access privilege	2