---

KFRBnnnnn - T

English message text (Y)

Explanation of the message

S: Datareplicator processing that takes place when the message is issued.

O: Action that is to be taken by the operator who receives the message.

[Action]: Action that is to be taken by the Datareplicator administrator who receives the message.

Note:

• Contact the customer support center in the message descriptions means that the user is to contact their designated support engineer or the sales department.
• Some messages have only English message text; they cannot be output in Japanese.

The message ID consists of the following components:

KFRB

Indicates that the message was issued by Datareplicator.

nnnnn

Message number

T

Message's severity level:

E

Error message: Indicates that an error occurred that prevents execution of a facility.

W

Warning message: Indicates that a warning has been issued with respect to resource utilization status, for example, or that a command specification is invalid, but processing will continue using the default value.

I

Information message: Indicates a report on a simple activity status that is neither E nor W.

Q

Query message: The system is waiting for a response from the user (Datareplicator will wait for the user to enter a response to the output message).

Y

Message output destination (if a message has multiple destinations, all the applicable destinations are listed, delimited by the plus sign (+)):

C

Error information file, and syslog file^#

S

Standard error output

L

syslog file^#

E

Error information file or event log (applicable to Windows)

#

In Windows, the message is output to the event log.

(a) Information provided in a message text

The message text explains the message or event, and provides embedded character strings as necessary. The following symbols are used in message texts:

{ }

Only one of the texts enclosed in braces is displayed in the message. The items within the braces are delimited by the vertical bar (|).

Example

{authorization-identifier|password}

[ ]

A text enclosed in brackets might not always be displayed.

(b) Selecting English or Japanese messages

Datareplicator's message texts can be provided in either English or Japanese. You select English or Japanese messages by your specification of the msglocale operand in the extraction system definition or import system definition.

This selection is available only for messages that are output to the error information files and syslog files. English-only messages are output to the standard output and when language selection is not available; in these cases, Japanese message texts are not provided.

Detail information is provided with some error messages when they are output to the error information files.

(a) Extraction transaction information

The extraction transaction information is input to the data linkage recovery facility and uniquely identifies transactions.

When extraction transactions are not output

When Datareplicator Extension is used for import processing, extraction transaction information is not output.

Message numbers that output extraction transactions as detail information:

The extraction transaction information is output as detail information for the messages with the following numbers:

03004, 03006, 03009, 03010, 03021, 03022, 03023, 03024, 03025, 03027, 03028, 03029, 03031, 03032, 03033, 03034, 03036, 03038, 03040, 03041, 03042, 03043, 03044, 03045, 03046, 03047, 03048, 03049, 03051, 03052, 03053, 03056, 03057, 03058, 03070, 03071, 03074, 03080, 03081, 03083, 03084, 03085, 03086, 03087, 03088, 03089, 03090, 03091, 03092, 03101, 03102, 03103, 03104, 03105, 03106

Output format of extraction transaction information

<text> Additional Transaction Info = nn...nn.

If the message number is not 03009, the displayed information is about the transaction being processed. If the message number is 03009, the displayed information is about the last transaction that was processed before a synchronization point was issued. nn...nn displays the following information:

When the sender is XDM/DS and the source DBMS is not TMS-4V/SP:

Activity ID (in hexadecimal)

When the sender is XDM/DS and the source DBMS is TMS-4V/SP:

APJ journal ID, in the format [a-] bbbbbbbb-cccccccc-ddd.

a: DMS-ID (not output if it is 0x00)

bbbbbbbb: Run ID (in hexadecimal)

cccccccc: Sequential central processing number (in hexadecimal)

ddd: JSQ (in decimal)

(b) Update information identifier

The update information identifier is specified when the import suppress facility is used in order to uniquely identify update information.

Update information identifier output conditions

The update information identifier is output when the following conditions are satisfied:

• The applicable transmission source uses a version listed in the following table
  

  Table 10-1 Program and version that add detailed information to messages

  Source program	Condition	Version
  HiRDB Datareplicator	None	04-00-/O or later
  HiRDB Datareplicator Version 5.0	None	05-03-/D or later
  HiRDB Datareplicator Version 6	None	06-01-/A or later
  HiRDB Datareplicator Version 7	None	07-00 or later
  HiRDB Datareplicator Version 8	None	08-00 or later
  XDM/DS	Extraction from TMS/4V	07-01 or later
  	Extraction from other source	08-03 or later
  DBDR	None	01-00 or later

• Datareplicator Extension is not used for import processing

Message numbers that output update information identifier as detail information

The update information identifier is output as detail information for the messages with the following numbers:

03004, 03010, 03028, 03029, 03031, 03032, 03033, 03034, 03036, 03038, 03040, 03041, 03042, 03043, 03044, 03045, 03046, 03047, 03048, 03049, 03051, 03052, 03053, 03056, 03057, 03058, 03070, 03071, 03074, 03080, 03081, 03083, 03084, 03085, 03086, 03087, 03088, 03089, 03090, 03091, 03092, 03101, 03102, 03103, 03104, 03105, 03106

Output format of update information identifier

<text> ExtractID = nn...nn.