Job Management Partner 1/File Transmission Server/FTP Description, Reference and Operator's Guide

[Contents][Index][Back][Next]

8.3.3 List of event log messages

Organization of this subsection
(1) Event log messages related to the JP1/FTP daemon
(2) Event log messages related to file transmission (client)
(3) Event log messages related to file transmission (server)
(4) Messages related to the Operations-Manager Agent
(5) Messages related to the ftstran command

(1) Event log messages related to the JP1/FTP daemon

KDJF1000-I (D,2)

JP1/FTS server started.

The JP1/FTP daemon has started.

KDJF1001-I (D,2)

JP1/FTS server stopped.

The JP1/FTP daemon has been terminated.

KDJF1002-W (D,2)

JP1/FTS server already started.

The JP1/FTP daemon is already running.

KDJF1003-E (D,0)

A system call error occurred.
[system-call-name(error-number)][module-name(line-number)]

A system call error has occurred.

(S)
Might terminate the JP1/FTP daemon.

(O)
Contact the system administrator.

KDJF1005-E (D,0)

Port number is not defined in the Services file. [service-name]

The indicated service-name is not defined in /etc/services.

(S)
Terminates the JP1/FTP daemon.

(O)
Define service-name by referencing 2.3.3 Setting the port numbers.

KDJF1006-E (D,0)

Cannot connect to the JP1/IM Event Server.

An attempt to establish connection with JP1/Base has failed.

(S)
Stops the JP1 event issuance processing and then resumes the start processing.

(O)
Check and, if necessary, revise the JP1/Base status. If there is no problem with the JP1/Base status, contact the system administrator.

KDJF1007-E (D,0)

JP1/IM not installed.

JP1/Base has not been installed.

(S)
Stops the JP1 event issuance processing and then resumes the start processing.

(O)
Install JP1/Base and then restart the JP1/FTP daemon.

KDJF1009-W (D,1)

A system call error occurred.
[system-call-name(error-number)][module-name(line-number)]

A system call error has occurred.

(S)
Continues processing although an error was detected in the JP1/FTP daemon.

(O)
Contact the system administrator.

KDJF1010-I (D,5)

JP1/FTS server was connected from a transfer client. [transfer-client-number]

The JP1/FTP daemon was connected from a transfer client.

KDJF1011-I (D,5)

JP1/FTS server received a transmission request from a transfer client. [transfer-client-number]

The JP1/FTP daemon received a transmission request from a transfer client.

KDJF1012-I (D,5)

JP1/FTS server started an FTP client. [transfer-client-number:connection-number]

The JP1/FTP daemon has started file transmission (client).

KDJF1013-I (D,5)

JP1/FTS server has sent transmission-end results to a transfer client. [transfer-client-number]

The JP1/FTP daemon has sent the transmission-end results to the transfer client.

KDJF4000-I (D,2)

JP1/FTS server is stopped.

The JP1/FTP daemon has terminated.

KDJF4001-W (D,2)

JP1/FTS server is not started.

The JP1/FTP daemon is not running. It has already been terminated.

KDJF4002-I (D,2)

JP1/FTS server is ending now.

The JP1/FTP daemon is undergoing termination processing.

KDJF4004-E (D,0)

JP1/FTS server can't be stopped.

The command with no option specified was unable to stop the JP1/FTP daemon, because the command with the -f option specified was executed while the command with no option specified was executing.

(S)
Terminates ftsstop command processing.

KDJF4005-E (D,0)

A system call error occurred. [system-call-name(error-number)][module-name(line-number)]

A system call error occurred in the ftsstop command.

(S)
Terminates ftsstop command processing.

(O)
Contact the system administrator.

(2) Event log messages related to file transmission (client)

KDJF2000-E (C,0)

A system call error occurred.
[system-call-name(error-number)][module-name(line-number)]
[connection-number:transmission-number]

A system call error occurred during file transmission (at the client).

(S)
Terminates file transmission (client) processing.

(O)
Contact the system administrator. For details about the error number, see 8.5 Details of error numbers.

KDJF2001-I (C,3)

Transmission ended normally.
[Transmission number: transmission-number]
[Connection number: connection-number]
[Card name: transmission-card-name]
[Logged-in user: login-name]
[Remote host name: remote-host-name]
[Local file name: local-file-name]
[Remote file name: remote-file-name]

File transmission (client) terminated normally.

KDJF2002-E (C,3)

Transmission ended abnormally.
[Transmission number: transmission-number]
[Connection number: connection-number]
[Card name: transmission-card-name]
[Logged-in user: login-name]
[Remote host name: remote-host-name]
[Local file name: local-file-name]
[Remote file name: remote-file-name]

File transmission (client) terminated abnormally.

(S)
Transmission terminated abnormally.

(O)
If another message (with the same module type, connection number, or transmission number) was displayed before this message, take appropriate action according to that error message. If there is no such error message, check the transmission logs for any errors.

KDJF2004-E (C,0)

Cannot connect to the JP1/IM Event Server.

An attempt to establish connection with JP1/Base has failed.

(S)
Stops the JP1 event generation processing and then resumes the transmission processing.

(O)
Check and, if necessary, revise the JP1/Base status. If there is no problem with the JP1/Base status, contact the system administrator.

KDJF2005-E (C,0)

JP1/IM not installed.

JP1/Base has not been installed.

(S)
Stops the JP1 event generation processing and then resumes the transmission processing.

(O)
Install JP1/Base, restart the JP1/FTP daemon, and then re-execute the transmission.

KDJF2006-W (C,1)

A system call error occurred.
[system-call-name(error-number)][module-name(line-number)]
[connection-number:transmission-number]

A system call error has occurred.

(S)
Continues processing although an error was detected in file transmission (client).

(O)
Contact the system administrator. For details about the error number, see 8.5 Details of error numbers.

KDJF2007-W (C,3)

Transmission ended normally, but the auto-start program failed to execute.
[Transmission number: transmission-number]
[Connection number: connection-number]
[Card name: transmission-card-name]
[Auto-start program: auto-start-program-name]
[Logged-in user: login-name]
[Remote host name: remote-host-name]
[Local file name: local-file-name]
[Remote file name: remote-file-name]

Execution of the auto-start program failed and the transmission terminated with a warning.

(S)
The file transmission (client) terminated normally, but the auto-start program could not be executed.

(O)
If another message (with the same module type, connection number, or transmission number) was displayed before this message, take appropriate action according to that error message. If there is no such message, check the specified auto-start program.

KDJF2008-E (C,0)

Transmission will now stop. A system call error occurred.
[system-call-name(error-number)][name-of-module-resulting-in-error(location-of-error)]

File transmission (client) will now be canceled. A system call error has occurred.

(S)
Terminates file transmission (client) processing.

(O)
An overview of the error might be displayed in the subsequent message. Determine the cause of the error from the error overview, system call name, or error number, and then take appropriate action.
If no error overview is displayed and the cause of the error cannot be determined, contact the system administrator. For details about the error number, see 8.5 Details of error numbers.

KDJF2009-E (C,0)

Transmission will now stop. A protocol error occurred.
[protocol-message][name-of-module-resulting-in-error(location-of-error)]

File transmission (client) will now be canceled. A protocol error has occurred.

(S)
Terminates file transmission (client) processing.

(O)
An overview of the error might be displayed in the subsequent message. Determine the cause of the error from the error overview or protocol message, and then take appropriate action.
If no error overview is displayed and the cause of the error cannot be determined, contact the system administrator.

KDJF2010-E (C,0)

Transmission will now stop. A logical error occurred.
[name-of-module-resulting-in-error(location-of-error)]

File transmission (client) will now be canceled. A logical error has occurred.

(S)
Terminates file transmission (client) processing.

(O)
Contact the system administrator.

KDJF2011-E (C,0)

Transmission will now stop. A forced stop occurred.
[name-of-module-resulting-in-error(location-of-error)]

File transmission (client) will now be canceled. A forced termination error has occurred.

(S)
Terminates file transmission (client) processing.

(O)
If this error has occurred for a reason other than forced termination by the user, contact the system administrator.

KDJF2012-E (C,0)

An attempt to connect to the FTP server has failed.

An attempt to establish control connection with the FTP server has failed.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Remote host settings
  • Status of the FTP server
  • Network status
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF2013-E (C,0)

An FTP command could not be sent. [FTP command:command-name]

Transmission of the command-name FTP command failed.

(S)
Terminates file transmission (client) processing.

(O)
Check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF2014-E (C,0)

A time out occurred during an attempt to receive a reply message.

A response from the FTP server could not be received within the specified amount of time.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:

KDJF2015-E (C,0)

An error occurred during an access to a send file. [file-name]

An error occurred while accessing a send file (file-name).

(S)
Terminates file transmission (client) processing.

(O)
Check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF2016-E (C,0)

An attempt to allocate a buffer for compression has failed.

An attempt to allocate a buffer for compressed file transmission has failed.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Status of virtual memory in the system
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF2017-E (C,0)

An error occurred during a data connection.

A data connection error occurred during file transmission.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Status of the FTP server
  • Network status
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF2018-E (C,0)

An error occurred during a file send.

An error occurred while sending a file.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Status of the FTP server
  • Network status
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF2019-E (C,0)

An error occurred during an access to a receive file. [file-name]

An error occurred while accessing a receive file (file-name).

(S)
Terminates file transmission (client) processing.

(O)
Check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF2020-E (C,0)

An attempt to allocate a buffer for a file receive has failed.

An attempt to allocate a buffer for file reception has failed.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Status of virtual memory in the system
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF2021-E (C,0)

An attempt to allocate a buffer for compression has failed.

An attempt to allocate a buffer for compressed file reception has failed.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF2022-E (C,0)

An error occurred during a data connection.

A data connection error occurred during file reception.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Status of the FTP server
  • Network status
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF2023-E (C,0)

An error occurred during a file receive.

An error occurred while receiving a file.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Status of the FTP server
  • Network status
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF2024-E (C,0)

The sizes of the transmitted files do not match. [file-name]

The sizes of the receive files do not match.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Status of the FTP server
  • Network status

KDJF2025-E (C,0)

An error occurred while a data connection was being prepared.

An error occurred while preparing to establish data connection.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Network status
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF2026-E (C,0)

An error occurred during an attempt to connect a data connection.

An error occurred while establishing data connection.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Status of the FTP server
  • Network status
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF2027-E (C,0)

An error occurred during receipt of a file list.

An error occurred while receiving a list of receive files.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Status of the FTP server
  • Network status
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF2028-E (C,0)

An error occurred during an attempt to create a file list to be sent.

An error occurred while creating a list of send files.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Specification of a local file
  • Status of the specified local file
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF2029-W (C,1)

The specified auto-start program is invalid. [auto-start-program-name]

The specified auto-start program (auto-start-program-name) is invalid.

(S)
Terminates start processing of the auto-start program and resumes file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Specified auto-start program
If another message (with the same module type, connection number, or transmission number) was displayed before this message, take appropriate action according to that error message.

KDJF2030-W (C,1)

The auto-start program could not be executed. [auto-start-program-name]

An attempt to start the specified auto-start program (auto-start-program-name) has failed.

(S)
Terminates start processing of the auto-start program and resumes file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Specified auto-start program
If another message (with the same module type, connection number, or transmission number) was displayed before this message, take appropriate action according to that error message.

KDJF2031-E (C,0)

An error occurred during an attempt to send a JP1/IM event.

An error occurred while issuing a JP1 event

(S)
Terminates JP1 event issuance processing and then resumes the file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • JP1/Base status
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF2032-E (C,0)

Could not connect to the FTP server. [Remote host name:remote-host-name]

An attempt to establish connection with the FTP server named remote-host-name has failed.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Status of the FTP server
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF2033-E (C,0)

command-name command failed.

The FTP command (command-name) failed.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Status of the FTP server
  • Network status
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF2034-I (C,5)

Connected to the FTP server. [Logged-in user:login-name][Remote host name:remote-host-name]

Connection has been established with the FTP server.

KDJF2035-I (C,4)

Transmission will now start.
[Card name: transmission-card-name]
[Logged-in user: login-name]
[Remote host name: remote-host-name]
[Local file name: local-file-name]
[Remote file name: remote-file-name]

File transmission (client) will now start.

KDJF2037-I (C,5)

The auto-start program has executed. [auto-start-program-name]

The auto-start program for file transmission (client) was executed.

KDJF2038-I (C,5)

FTP client disconnected from the FTP server.

The FTP client was disconnected from the FTP server.

KDJF2039-E (C,0)

There was no receive file.
[Logged-in user: login-name]
[Remote host name: remote-host-name]
[Remote file name: remote-file-name]

There was no receive file.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Specified remote file name
  • FTP server status

KDJF2040-E (C,0)

An error occurred during an attempt to read a file to be sent. [file-name]

An error occurred while reading a send file.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Specified local file name
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF2041-E (C,0)

An error occurred during an attempt to write a received file. [file-name]

An error occurred while writing a receive file.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Specified local file name
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

(3) Event log messages related to file transmission (server)

KDJF3000-E (S,0)

A system call error occurred.
[system-call-name(error-number)][module-name(line-number)]
[connection-number:transmission-number]

A system call error has occurred.

(S)
Terminates file transmission (server) processing.

(O)
Contact the system administrator. For details about the error number, see 8.5 Details of error numbers.

KDJF3001-I (S,3)

Transmission ended normally.
[Transmission number: transmission-number]
[Connection number: connection-number]
[Logged-in user: login-name]
[Remote host name: remote-host-name]
[Local file name: local-file-name]

Transmission terminated normally.

KDJF3002-E (S,3)

Transmission ended abnormally.
[Transmission number: transmission-number]
[Connection number: connection-number]
[Logged-in user: login-name]
[Remote host name: remote-host-name]
[Local file name: local-file-name]

Transmission terminated abnormally.

(S)
Transmission terminated abnormally.

(O)
If another message (with the same module type, connection number, or transmission number) was displayed before this message, take appropriate action according to that error message. If there is no such error message, check the transmission logs for any errors.

KDJF3004-E (S,0)

Cannot connect to the JP1/IM Event Server.

An attempt to establish connection with JP1/Base has failed.

(S)
Stops the JP1 event generation processing and then resumes the transmission processing.

(O)
Check and, if necessary, revise the JP1/Base status. If there is no problem with the JP1/Base status, contact the system administrator.

KDJF3005-E (S,0)

JP1/IM not installed.

JP1/Base has not been installed.

(S)
Stops the JP1 event generation processing and then resumes the transmission processing.

(O)
Install JP1/Base, restart the JP1/FTP daemon, and then re-execute the transmission.

KDJF3006-W (S,1)

A system call error occurred.
[system-call-name(error-number)][module-name(line-number)]
[connection-number:transmission-number]

A system call error has occurred.

(S)
Continues processing although an error was detected during file transmission (server).

(O)
Contact the system administrator. For details about the error number, see 8.5 Details of error numbers.

KDJF3007-W (S,3)

Transmission ended normally, but the auto-start program failed to execute.
[Transmission number: transmission-number]
[Connection number: connection-number]
[Auto-start program: auto-start-program-name]
[Logged-in user: login-name]
[Remote host name: remote-host-name]
[Local file name: local-file-name]

Execution of the auto-start program failed and the transmission terminated with a warning.

(S)
File transmission (server) terminated normally, but execution of the auto-start program failed.

(O)
If another message (with the same module type, connection number, or transmission number) was displayed before this message, take appropriate action according to that error message. If there is no such message, check the specified auto-start program.

KDJF3008-E (S,0)

Transmission will now stop. A system call error occurred.
[system-call-name(error-number)][name-of-module-resulting-in-error(location-of-error)]

Transmission will now be canceled. A system call error has occurred.

(S)
Terminates file transmission (server) processing.

(O)
An overview of the error might be displayed in the subsequent message. Determine the cause of the error from the error overview, system call name, or error number, and then take appropriate action.
If no error overview is displayed and the cause of the error cannot be determined, contact the system administrator. For details about the error number, see 8.5 Details of error numbers.

KDJF3010-E (S,0)

Transmission will now stop. A logical error occurred.
[name-of-module-resulting-in-error(location-of-error)]

Transmission will now be canceled. A logical error has occurred.

(S)
Terminates file transmission (server) processing.

(O)
Contact the system administrator.

KDJF3011-E (S,0)

Transmission will now stop. A forced stop occurred.
[name-of-module-resulting-in-error(location-of-error)]

Transmission will now be canceled. A forced termination error has occurred.

(S)
Terminates file transmission (server) processing.

(O)
If this error has occurred for a reason other than forced termination by the user, contact the system administrator.

KDJF3012-E (S,0)

Connection was lost.

Connection was lost suddenly.

(S)
Terminates file transmission (server) processing.

(O)
Check and, if necessary, revise the following:
  • Status of the FTP client
  • Network status
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF3013-E (S,0)

An error occurred during a send file access. [file-name]

An error occurred while accessing a send file (file-name).

(S)
Terminates file transmission (server) processing.

(O)
Check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF3014-E (S,0)

An error occurred during a receive file access. [file-name]

An error occurred while accessing a receive file (file-name).

(S)
Terminates file transmission (server) processing.

(O)
Check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF3015-E (S,0)

An error occurred while a data connection was being prepared.

An error occurred while preparing to establish data connection.

(S)
Terminates file transmission (server) processing.

(O)
Check and, if necessary, revise the following:
  • Network status
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF3016-E (S,0)

An error occurred during an attempt to connect a data connection.

An error occurred while establishing data connection.

(S)
Terminates file transmission (server) processing.

(O)
Check and, if necessary, revise the following:
  • Status of the FTP client
  • Network status
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF3017-E (S,0)

An attempt to allocate a buffer for a file send has failed.

An attempt to allocate a buffer for file transmission has failed.

(S)
Terminates file transmission (server) processing.

(O)
Check and, if necessary, revise the following:
  • Status of virtual memory in the system
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF3018-E (S,0)

An attempt to allocate a buffer for compression has failed.

An attempt to allocate a buffer for compressed file transmission has failed.

(S)
Terminates file transmission (server) processing.

(O)
Check and, if necessary, revise the following:
  • Status of virtual memory in the system
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF3019-E (S,0)

An error occurred during an attempt to read a file to be sent. [file-name]

An error occurred while reading a send file.

(S)
Terminates file transmission (server) processing.

(O)
Check and, if necessary, revise the following:
  • Status of file (file-name) requested to be sent
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF3020-E (S,0)

An error occurred during a file send.

An error occurred while sending a file.

(S)
Terminates file transmission (server) processing.

(O)
Check and, if necessary, revise the following:
  • Status of the FTP client
  • Network status
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF3021-E (S,0)

An attempt to allocate a buffer for a file receive has failed.

An attempt to allocate a buffer for file reception has failed.

(S)
Terminates file transmission (server) processing.

(O)
Check and, if necessary, revise the following:
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF3022-E (S,0)

An attempt to allocate a buffer for compression has failed.

An attempt to allocate a buffer for compressed file reception has failed.

(S)
Terminates file transmission (server) processing.

(O)
Check and, if necessary, revise the following:
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF3023-E (S,0)

An error occurred during a file receive.

An error occurred while receiving a file.

(S)
Terminates file transmission (server) processing.

(O)
Check and, if necessary, revise the following:
  • Status of the FTP client
  • Network status
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF3024-E (S,0)

An error occurred during an attempt to write a received file. [file-name]

An error occurred while writing a receive file.

(S)
Terminates file transmission (server) processing.

(O)
Check and, if necessary, revise the following:
  • Status of file (file-name) requested to be received
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF3025-E (S,0)

The sizes of the transmitted files do not match. [file-name]

The sizes of the receive files do not match.

(S)
Terminates file transmission (server) processing.

(O)
Check and, if necessary, revise the following:
  • FTP server status
  • Network status

KDJF3026-E (S,0)

An error occurred during a reply send.

An error occurred while sending an FTP command's reply.

(S)
Terminates file transmission (server) processing.

(O)
Check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF3027-E (S,0)

Connection was disconnected from a remote host.

Control connection was lost.

(S)
Terminates file transmission (server) processing.

(O)
Check and, if necessary, revise the following:
  • Status of the FTP client
  • Network status

KDJF3028-E (S,0)

Transfer aborted. Data connection closed.

Transmission was aborted. An abort request was received from the FTP client.

(S)
Terminates file transmission (server) processing.

(O)
Check and, if necessary, revise the following:
  • Status of the FTP client

KDJF3030-E (S,0)

An error occurred during a control connection.

An error occurred in the control connection.

(S)
Terminates file transmission (server) processing.

(O)
Check and, if necessary, revise the following:
  • Status of the FTP client
  • Network status
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF3031-W (S,1)

The specified auto-start program is invalid. [auto-start-program-name]

The specified auto-start program (auto-start-program-name) is invalid.

(S)
Terminates start processing of the auto-start program and resumes file transmission (server) processing.

(O)
Check and, if necessary, revise the following:
  • Specified auto-start program
If another message (with the same module type, connection number, or transmission number) was displayed before this message, take appropriate action according to that error message.

KDJF3032-W (S,1)

The auto-start program could not be executed. [auto-start-program-name]

An attempt to start the specified auto-start program (auto-start-program-name) has failed.

(S)
Terminates start processing of the auto-start program and resumes file transmission (server) processing.

(O)
Check and, if necessary, revise the following:
  • Specified auto-start program
If another message (with the same module type, connection number, or transmission number) was displayed before this message, take appropriate action according to that error message.

KDJF3033-E (S,0)

An error occurred during an attempt to send a JP1/IM event.

An error occurred while issuing a JP1 event.

(S)
Terminates JP1 event issuance processing and then resumes the file transmission (server) processing.

(O)
Check and, if necessary, revise the following:
  • JP1/Base status
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF3034-I (S,5)

FTP server has been connected to an FTP client.
[Logged-in user:login-name][Remote host name:remote-host-name]

Connection has been established with the FTP client.

KDJF3035-I (S,4)

Transmission will now start.
[Logged-in user:login-name][Remote host name:remote-host-name][Local file name:local-file-name]

File transmission (server) will now start.

KDJF3037-I (S,5)

The auto-start program has executed. [auto-start-program-name]

The auto-start program for file transmission (server) was executed.

KDJF3038-I (S,5)

FTP server disconnected from an FTP client.

The FTP server was disconnected from the FTP client.

KDJF3039-E (S,0)

An error occurred during a data connection.

During file transmission, an error occurred while establishing data connection.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Status of the FTP client
  • Network status
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

KDJF3040-E (S,0)

An error occurred during a data connection.

During file reception, an error occurred while establishing data connection.

(S)
Terminates file transmission (client) processing.

(O)
Check and, if necessary, revise the following:
  • Status of the FTP client
  • Network status
Also check the information in the error message (with the same module type, connection number, or transmission number) that was displayed before this message.

(4) Messages related to the Operations-Manager Agent

KDJF6000-I (A,2)

JP1/FTS agent started.

The Operations-Manager Agent has started.

KDJF6001-W (A,2)

JP1/FTS agent already started.

The Operations-Manager Agent is already running.

KDJF6002-E (A,0)

A system call error occurred.
[system-call-name(error-number)][module-name(line-number)]

A system call error has occurred.

(S)
Terminates jftsa command processing.

(O)
Contact the system administrator.

KDJF6004-E (A,0)

Port number is not defined in the Services file. [service-name]

The indicated service-name has not been set in /etc/services.

(S)
Terminates jftsa command processing.

(O)
The indicated service-name has not been set in /etc/services. For details about how to specify the settings, see 2.3.3 Setting the port numbers.

KDJF6005-E (A,0)

[Java_Path]: Not Found.

The Java start command cannot be found.

(S)
Terminates jftsa command processing.

(O)
Check if there is a path indicated as Java_Path. Also check if the installation of JP1/FTP has been completed. If the path indicated as Java_Path does not exist or the installation was canceled, reinstall JP1/FTP. If the path indicated as Java_Path exists and the installation has been completed successfully, contact the system administrator.

KDJF6006-E (A,0)

JP1/FTS agent can't be started.

The Operations-Manager Agent could not be started.

(S)
Terminates the Operations-Manager Agent.

(O)
Re-execute the command. If the command cannot be executed, contact the system administrator.

KDJF6007-W (A,1)

JP1/FTS agent is starting or ending now.

The Operations-Manager Agent is undergoing start or termination processing.

KDJF6008-E (A,0)

Specify java file or jre file.

No Java file is specified.

(S)
Terminates jftsa command processing.

(O)
Contact the system administrator.

KDJF6009-E (A,0)

Cannot connect to the JP1/IM Event Server.

An attempt to establish connection with JP1/Base has failed.

(S)
Stops the JP1 event issuance processing and then resumes the start processing.

(O)
Check and, if necessary, revise the JP1/Base status. If there is no problem with the JP1/Base status, contact the system administrator.

KDJF6010-E (A,0)

JP1/IM not installed.

JP1/Base has not been installed.

(S)
Stops the JP1 event issuance processing and then resumes the start processing.

(O)
Install JP1/Base and then restart the Operations-Manager Agent.

KDJF6011-W (A,1)

A system call error occurred.
[system-call-name(error-number)][module-name(line-number)]

A system call error has occurred.

(S)
Continues processing although an error was detected in the Operations-Manager Agent.

(O)
Contact the system administrator.

KDJF6012-I (A,2)

JP1/FTS agent stopped.

The Operations-Manager Agent has stopped.

KDJF6013-E (A,0)

JP1/FTS agent will now stop.

The Operations-Manager Agent will now be canceled.

(S)
Terminates jftsa command processing.

(O)
Contact the system administrator.

KDJF6100-I (A,2)

JP1/FTS agent is stopped.

The Operations-Manager Agent has stopped.

KDJF6101-W (A,2)

JP1/FTS agent is not started.

The Operations-Manager Agent has not started. It has already stopped.

KDJF6102-W (A,2)

JP1/FTS agent is starting or ending now.

The Operations-Manager Agent is undergoing start or termination processing.

KDJF6105-E (A,0)

A system call error occurred.
[system-call-name(error-number)][module-name(line-number)]

A system call error occurred in the ftsastop command.

(S)
Terminates ftsastop command processing.

(O)
Contact the system administrator.

KDJF6106-E (A,0)

Cannot connect to the JP1/IM Event Server.

An attempt to establish connection with JP1/Base has failed.

(S)
Terminates JP1 event issuance processing and then resumes the ftsastop processing.

(O)
Check and, if necessary, revise the JP1/Base status. If there is no problem with the JP1/Base status, contact the system administrator.

KDJF6107-E (A,0)

JP1/IM not installed.

JP1/Base has not been installed.

(S)
Terminates JP1 event issuance processing and then resumes the ftsastop command processing.

(O)
Install JP1/Base.

(5) Messages related to the ftstran command

KDJF5038-I (P,6)

The ftstran command will now start. [Process ID:process-ID][User ID:user-ID]

The ftstran command will now start.

KDJF5039-I (P,6)

Transmission ended normally.
[Process ID: process-ID]
[Card name: transmission-card-name]
[Transmission number: transmission-number]
[Connection number: connection-number]

File transmission terminated normally.

KDJF5040-E (P,6)

Transmission ended abnormally.
[Process ID: process-ID]
[Card name: transmission-card-name]
[Transmission number: transmission-number]
[Connection number: connection-number]
[Error type: System call error]
[Module where error occurred: name-of-module-resulting-in-error]
[Location where error occurred: location-of-error]
[Name of system call: system-call-name]
[Error code: error-number]

File transmission terminated abnormally due to a system call error.

(S)
Terminates the ftstran command.

(O)
For details about the error and how to handle it, see the error message regarding the file transmission (client or server).

KDJF5041-E (P,6)

Transmission ended abnormally.
[Process ID: process-ID]
[Card name: transmission-card-name]
[Transmission number: transmission-number]
[Connection number: connection-number]
[Error type: Logic error]
[Module where error occurred: name-of-module-resulting-in-error]
[Location where error occurred: location-of-error]

File transmission terminated abnormally due to a logical error.

(S)
Terminates the ftstran command.

(O)
For details about the error and how to handle it, see the error message regarding the file transmission (client or server).

KDJF5042-E (P,6)

Transmission ended abnormally.
[Process ID: process-ID]
[Card name: transmission-card-name]
[Transmission number: transmission-number]
[Connection number: connection-number]
[Error type: Forced stop error]

File transmission terminated abnormally due to a forced termination error.

(S)
Terminates the ftstran command.

(O)
For details about the error and how to handle it, see the error message regarding the file transmission (client or server).

KDJF5043-E (P,6)

Transmission ended abnormally.
[Process ID: process-ID]
[Card name: transmission-card-name]
[Transmission number: transmission-number]
[Connection number: connection-number]
[Error type: Protocol error]
[Module where error occurred: name-of-module-resulting-in-error]
[Location where error occurred: location-of-error]
[Protocol message: protocol-message]

File transmission terminated abnormally due to a protocol error.

(S)
Terminates the ftstran command.

(O)
For details about the error and how to handle it, see the error message regarding the file transmission (client or server).

KDJF5044-I (P,6)

The ftstran command will now stop. [Process ID:process-ID]

The ftstran command will now be terminated.

KDJF5045-E (P,6)

A system call error occurred.
[Process ID: process-ID]
[Function name: system-call-name]
[Error code: error-number]
[Exit status: return-value]

The ftstran command terminated abnormally due to a system call error.

(S)
Terminates the ftstran command.

(O)
Determine the cause of the error from the system call name and error number, and then take appropriate action. If the cause of the error cannot be determined, contact the system administrator.

KDJF5046-E (P,6)

A function error occurred.
[Process ID: process-ID]
[Function name: API-function-name]
[Error code: API-function-error-information]
[Exit status: return-value]

The ftstran command terminated abnormally due to a JP1/FTP API function error.

(S)
Terminates the ftstran command.

(O)
Determine the cause of the error from the API function name and API function error information. If the cause of the error cannot be determined, contact the system administrator.

[Contents][Back][Next]

[Trademarks]

All Rights Reserved. Copyright (C) 2010, Hitachi, Ltd.