Job Management Partner 1/File Transmission Server/FTP Description, Reference and Operator's Guide
Format
- Registering:
ftsregc /N [transmission-card-name] [transmission-information-option transmission-option-parameter]
- Changing:
ftsregc /C transmission-card-name [transmission-information-option transmission-option-parameter]
- Deleting:
ftsregc /D transmission-card-name
- Displaying:
ftsregc /L transmission-card-name
Function
The ftsregc command registers, changes, deletes, or displays transmission information.
Arguments
/N [transmission-card-name] [transmission-information-option transmission-option-parameter]
There are two ways to register transmission information. One is by registering new transmission information that has been set on a transmission card. The other is by using an existing transmission card as a model and editing its contents in order to register it as a separate transmission card.
- Registering new transmission information onto a transmission card
ftsregc /N [transmission-information-option transmission-option-parameter]
This method creates new transmission information based on the information specified with the transmission information options. Among the available transmission information options, you must always specify /TC, /TH, /TU, /TT, /TY, /TL, and /TR. You must use the /TC transmission information option to specify a name for the transmission card.
- Registering transmission information using an existing transmission card
ftsregc /N [transmission-card-name] [transmission-information-option transmission-option-parameter]
This method specifies the name of a transmission card to use as a model and then specifies transmission information options to change. You must specify in /TC a name for the new transmission card that you are registering.
The table below lists and describes the transmission information options.
Table 6-2 Transmission information options
Option name Transmission option parameter Value /TC Card name ((1 to 20 bytes)) /TH Connection-target host name ((1 to 256 bytes)) /TP Connection-target port number ((1 to 65,535)) /TU Login user name ((1 to 50 bytes)) /TW Login password ((1 to 50 bytes)) /TT Send/receive type:
- SEND: Sends files (overwrite).
- RECV: Receives files.
- APPE: Sends files (append).
SEND|RECV|APPE /TY Transmission mode:
- ASCII: Transmits files in the ASCII mode.
- BINARY: Transmits files in the binary mode.
ASCII|BINARY /TM Compression mode:
- STREAM: Transmits files without compressing them.
- COMPRESS: Compresses files during transmission.
STREAM|COMPRESS /TK Size check:
- CHECK: Checks the size.
- UNCHECK: Does not check the size.
CHECK|UNCHECK /TL Local file name ((1 to 259 bytes)) /TR Remote file name ((1 to 259 bytes)) /TS Name of the program to start when transmission ends normally ((1 to 259 bytes)) /TF Name of the program to start when transmission ends abnormally ((1 to 256 bytes)) /TX FTP command ((1 to 300 bytes)) /TO Comment ((1 to 80 bytes)) /TA Single-file or multiple-file transmission during reception:
- AUTO: Switches automatically between single-file transmission and multiple-file transmission.
- MULTIPLE: Transmits multiple files.
- SINGLE: Transmits a single file.
AUTO|MULTIPLE|SINGLE For details about each transmission option parameter, see 3.4.1 Registering transmission information onto a transmission card.
/C card-name [transmission-information-option transmission-option-parameter]
Changes from the specified card the transmission information that is specified by the transmission information options.
/D card-name
Deletes the transmission information identified by the specified card name.
/L card-name
Displays the transmission information for the specified card.
Return values
0 Normal termination 6100001 Omission of card name specification during registration 6100002 Omission of remote host name specification during registration 6100003 Omission of login user name specification during registration 6100004 Omission of send/receive type specification during registration 6100005 Omission of transmission mode specification during registration 6100006 Omission of local file name specification during registration 6100007 Omission of remote file name specification during registration 6100008 Abnormal termination when an existing card name is specified 6100009 Omission of card name specification during registration 6100010 Abnormal termination during registration of card information 6200001 Omission of card name specification during change 6200002 Abnormal termination during acquisition of card information before change 6200003 Abnormal termination during acquisition of card information after change 6200004 Abnormal termination during deletion of card information before change 6200005 Abnormal termination during change of card information 6300000 Abnormal termination when ftsregc /D is specified 6400000 Abnormal termination when ftsregc /L is specified 6900000 Command line syntax error 9000001 Abnormal termination common to ftsregc 9900001 Abnormal termination (not executed by the administrator (applicable to Windows Server 2008)) For details about the messages that are displayed, see 8.3.2 Messages displayed during execution of the ftsregc command.
All Rights Reserved. Copyright (C) 2010, Hitachi, Ltd.