Job Management Partner 1/Automatic Job Management System 3 Command Reference 2

Appendix C. Changes in 3020-3-S11-04(E)

The following table list the changes in this manual (3020-3-S11-04(E)).

Table C-1 Changes in 3020-3-S11-04(E)

No. Location Changes

1 All Windows 7 has been added as an OS supported by JP1/AJS3 - View.

2 1.2.1 A note common to all commands has been added stating that when specifying a file name as a command argument, the file contents must conform to the character encoding specified in the AJSCHARCODE environment setting parameter.

3 1.4.2 The description of the SHELL environment variable has been improved.

4 1.5.9(2) A description has been added stating that execution of any command other than jpqexport, jpqimport, and jajs_maintain command requires the OS user who executes the command to have been registered as a JP1 user on the authentication server.

5 2.
ajsembdbbuild

In the -i option description, a description has been added regarding the command used to check the embedded database installation directory.

A statement has been added stating that the -lc option is no longer necessary.

In the -id option description of the ajsembdbbuild command, a statement has been added stating that the value to be specified in this option is the setup identifier specified for the -id option of the ajsembdbidlist command.

In the -ext_db description option, a statement has been added stating that before the pddbst command is executed from a command prompt, environment variables must be set from the same command prompt.

In the -ext_log option description, a description has been added regarding the command used to check whether the auto-increment function is enabled.

6 2.
ajsembdbidlist

A description has been added regarding the -v option that is specified to display the version of the embedded database.

The description of usage and output examples has been improved.

7 2.
ajsembdbinstl In the -i option description, a statement has been added stating that if the option is omitted, n in directory path _JFn becomes the value of n in the setup identifier specified in the -id option.

8 2.
ajsembdbsetup

A statement has been added stating that the command can be executed only when the embedded database is running.

A note has been added stating that execution of the ajsembdbsetup command requires an environment in which the logical host name specified for the -mh option can be resolved into an IP address.

9 2.
ajsembdbuninstl A note has been added stating that the installation directory and data area directory for the embedded database must be deleted manually when they are no longer necessary.

10 2.
ajssetup The function description of the command has been split into two cases: one where the database is in a standard configuration and one where the database is in a compatible ISAM configuration.

11 2.
jajs_config A statement has been added stating that the command check for environment setting parameters whose valid value changes according to whether the OS is Windows or UNIX is constrained.

12 2.
jajs_migrate

An example of executing the ajsshmdel command has been added to the note stating that the JP1/AJS3 service must be stopped before execution of the jajs_migrate command.

A note has been added to improve the description of the action to be taken if the KAVS0550-E message is output to the standard error output and the command terminates abnormally.

A note on execution agents defined when this command is executed has been added.

13 2.
jajs_setup

In the -a option description, a statement has been added stating that if the number of scheduler services created for one embedded database needs to be specified, advanced setup of the embedded database is required.

In the -r option description, a statement has been added stating that if the KAVS1133-W message is output while the scheduler service is being renamed, the scheduler service local time or the suspend function must be re-set later.

In the -d option description, a statement has been added stating that a database directory name that ends with a path separator must not be specified.

A description of when the new scheduler service configuration will take effect after it is changed has been added as a note.

A note has been added stating that execution of the command requires an environment in which the logical host name can be resolved into an IP address.

A note has been added stating that the command cannot add or remove a scheduler service on a standby host in a cluster configuration.

For the scheduler service renaming procedure in Additional information, a description has been added regarding the operations to be performed if the KAVS1133-W message is not output during execution of the jajs_setup command.

14 2.
jajs_setup_cluster In the -h option description, a statement has been added stating that setup of the primary node requires an environment in which the specified logical host name can be resolved into an IP address.

15 2.
jp1ajs2_setup_cluster In the command function description, a statement has been added stating that jp1ajs2_setup_cluster is a command for setting up the JP1/AJS3 - Manager logical host environment in a compatible ISAM configuration when the JP1/AJS3 database is used in that configuration.

16 3.
jajsacfg The command function description has been improved to clearly explain that jajsacfg is a command for compatibility with JP1/AJS2 whose version is 8 or earlier.

17 3.
jpqendjobshow,
jpqjobalt,
jpqjobcan,
jpqjobdel,
jpqjobget,
jpqjobmove,
and jpqjobshow The command function description has been modified to indicate for each database configuration the types of jobs for which the command is applicable.

18 3.
jpqjobsub The description of the startup shell specified in the -shl option has been improved.

No.	Location	Changes
1	All	Windows 7 has been added as an OS supported by JP1/AJS3 - View.
2	1.2.1	A note common to all commands has been added stating that when specifying a file name as a command argument, the file contents must conform to the character encoding specified in the AJSCHARCODE environment setting parameter.
3	1.4.2	The description of the SHELL environment variable has been improved.
4	1.5.9(2)	A description has been added stating that execution of any command other than jpqexport, jpqimport, and jajs_maintain command requires the OS user who executes the command to have been registered as a JP1 user on the authentication server.
5	2. ajsembdbbuild	In the -i option description, a description has been added regarding the command used to check the embedded database installation directory. A statement has been added stating that the -lc option is no longer necessary. In the -id option description of the ajsembdbbuild command, a statement has been added stating that the value to be specified in this option is the setup identifier specified for the -id option of the ajsembdbidlist command. In the -ext_db description option, a statement has been added stating that before the pddbst command is executed from a command prompt, environment variables must be set from the same command prompt. In the -ext_log option description, a description has been added regarding the command used to check whether the auto-increment function is enabled.
6	2. ajsembdbidlist	A description has been added regarding the -v option that is specified to display the version of the embedded database. The description of usage and output examples has been improved.
7	2. ajsembdbinstl	In the -i option description, a statement has been added stating that if the option is omitted, n in directory path _JFn becomes the value of n in the setup identifier specified in the -id option.
8	2. ajsembdbsetup	A statement has been added stating that the command can be executed only when the embedded database is running. A note has been added stating that execution of the ajsembdbsetup command requires an environment in which the logical host name specified for the -mh option can be resolved into an IP address.
9	2. ajsembdbuninstl	A note has been added stating that the installation directory and data area directory for the embedded database must be deleted manually when they are no longer necessary.
10	2. ajssetup	The function description of the command has been split into two cases: one where the database is in a standard configuration and one where the database is in a compatible ISAM configuration.
11	2. jajs_config	A statement has been added stating that the command check for environment setting parameters whose valid value changes according to whether the OS is Windows or UNIX is constrained.
12	2. jajs_migrate	An example of executing the ajsshmdel command has been added to the note stating that the JP1/AJS3 service must be stopped before execution of the jajs_migrate command. A note has been added to improve the description of the action to be taken if the KAVS0550-E message is output to the standard error output and the command terminates abnormally. A note on execution agents defined when this command is executed has been added.
13	2. jajs_setup	In the -a option description, a statement has been added stating that if the number of scheduler services created for one embedded database needs to be specified, advanced setup of the embedded database is required. In the -r option description, a statement has been added stating that if the KAVS1133-W message is output while the scheduler service is being renamed, the scheduler service local time or the suspend function must be re-set later. In the -d option description, a statement has been added stating that a database directory name that ends with a path separator must not be specified. A description of when the new scheduler service configuration will take effect after it is changed has been added as a note. A note has been added stating that execution of the command requires an environment in which the logical host name can be resolved into an IP address. A note has been added stating that the command cannot add or remove a scheduler service on a standby host in a cluster configuration. For the scheduler service renaming procedure in Additional information, a description has been added regarding the operations to be performed if the KAVS1133-W message is not output during execution of the jajs_setup command.
14	2. jajs_setup_cluster	In the -h option description, a statement has been added stating that setup of the primary node requires an environment in which the specified logical host name can be resolved into an IP address.
15	2. jp1ajs2_setup_cluster	In the command function description, a statement has been added stating that jp1ajs2_setup_cluster is a command for setting up the JP1/AJS3 - Manager logical host environment in a compatible ISAM configuration when the JP1/AJS3 database is used in that configuration.
16	3. jajsacfg	The command function description has been improved to clearly explain that jajsacfg is a command for compatibility with JP1/AJS2 whose version is 8 or earlier.
17	3. jpqendjobshow, jpqjobalt, jpqjobcan, jpqjobdel, jpqjobget, jpqjobmove, and jpqjobshow	The command function description has been modified to indicate for each database configuration the types of jobs for which the command is applicable.
18	3. jpqjobsub	The description of the startup shell specified in the -shl option has been improved.

[Contents][Back][Next]

[Trademarks]