Job Management Partner 1/Automatic Job Management System 3 Command Reference 1

Appendix D. Changes in 3020-3-S10-04(E)

The following table list the changes in this manual (3020-3-S10-04(E)).

Table D-1 Changes in 3020-3-S10-04(E)

No. Location Changes

1 All Windows 7 has been added as an OS supported by JP1/AJS3 - View.

2 1.2.1 A note common to all commands has been added stating that when specifying a file name as a command argument, the content of the file must conform to the character encoding specified in the AJSCHARCODE environment setting parameter.

3 1.4.2 The description of the SHELL environment variable has been improved.

4 1.5.9(2) A description has been added stating that execution of any command other than jpqexport, jpqimport, and jajs_maintain requires the OS user who executes the command to be registered as a JP1 user on the authentication server.

5 2.
ajsagtadd,
ajsagtalt,
ajsagtdel,
ajsagtprint,
and ajsagtshow

In the description of the -h option, a note has been added stating that the -h option and the JP1_HOSTNAME environment variable must not be specified for a physical host.

A note has been added stating that the command cannot be executed for JP1/AJS3 - Manager installed on another host.

6 2.
ajschgjob A description has been added stating that in Windows, when inheriting a display name, Nickname must be set for the NextAddress environment setting parameter.

7 2.
ajschgnet The description of the -mS option has been improved.

8 2.
ajsdefine A note has been added stating that the command might terminate abnormally if the jobnet specified in destination-unit-name has been registered for execution or edited exclusively by JP1/AJS3 - View.

9 2.
ajsembdbbackup

In the description of the -i option, a description has been added stating that the option is provided for compatibility with versions earlier than 08-00.

The amount of free space required for the backup file storage directory has been indicated for each embedded database model.

A note has been added stating that multiple instances of the ajsembdbbackup command must not be executed concurrently.

10 2.
ajsembdbrstr

A note has been added that applies when the unload log is used in an embedded-database environment created by advanced setup of the embedded database.

In the notes that apply when an error occurs during execution of the ajsembdbrstr command, a description has been added to state that environment variables must be set from the command prompt when the pddbst command is executed.

A note has been added stating that multiple instances of the ajsembdbrstr command must not be executed concurrently.

11 2.
ajsrelease A description of release IDs that cannot be specified for the -rid option has been added.

12 2.
ajsrgexport A description has been added stating that a host name or execution ID cannot be specified for the unit-name argument.

13 2.
ajsrgimport The descriptions of the -u and -o options have been changed.

14 2.
ajsschedule The description of the root-jobnet-name argument has been changed.

15 2.
ajsstart A note has been added stating that if the ajslocaldate command is used to change the local date and time of a scheduler service, the scheduler service must be cold-started.

16 2.
jpomanevreset In the description of the -a option, text has been added stating that the execution host name specified in the -s option of the ajsagtadd command must be specified.

17 2.
jpomanevshow A note on executing commands on a Windows Server 2008 PC has been added.

No.	Location	Changes
1	All	Windows 7 has been added as an OS supported by JP1/AJS3 - View.
2	1.2.1	A note common to all commands has been added stating that when specifying a file name as a command argument, the content of the file must conform to the character encoding specified in the AJSCHARCODE environment setting parameter.
3	1.4.2	The description of the SHELL environment variable has been improved.
4	1.5.9(2)	A description has been added stating that execution of any command other than jpqexport, jpqimport, and jajs_maintain requires the OS user who executes the command to be registered as a JP1 user on the authentication server.
5	2. ajsagtadd, ajsagtalt, ajsagtdel, ajsagtprint, and ajsagtshow	In the description of the -h option, a note has been added stating that the -h option and the JP1_HOSTNAME environment variable must not be specified for a physical host. A note has been added stating that the command cannot be executed for JP1/AJS3 - Manager installed on another host.
6	2. ajschgjob	A description has been added stating that in Windows, when inheriting a display name, Nickname must be set for the NextAddress environment setting parameter.
7	2. ajschgnet	The description of the -mS option has been improved.
8	2. ajsdefine	A note has been added stating that the command might terminate abnormally if the jobnet specified in destination-unit-name has been registered for execution or edited exclusively by JP1/AJS3 - View.
9	2. ajsembdbbackup	In the description of the -i option, a description has been added stating that the option is provided for compatibility with versions earlier than 08-00. The amount of free space required for the backup file storage directory has been indicated for each embedded database model. A note has been added stating that multiple instances of the ajsembdbbackup command must not be executed concurrently.
10	2. ajsembdbrstr	A note has been added that applies when the unload log is used in an embedded-database environment created by advanced setup of the embedded database. In the notes that apply when an error occurs during execution of the ajsembdbrstr command, a description has been added to state that environment variables must be set from the command prompt when the pddbst command is executed. A note has been added stating that multiple instances of the ajsembdbrstr command must not be executed concurrently.
11	2. ajsrelease	A description of release IDs that cannot be specified for the -rid option has been added.
12	2. ajsrgexport	A description has been added stating that a host name or execution ID cannot be specified for the unit-name argument.
13	2. ajsrgimport	The descriptions of the -u and -o options have been changed.
14	2. ajsschedule	The description of the root-jobnet-name argument has been changed.
15	2. ajsstart	A note has been added stating that if the ajslocaldate command is used to change the local date and time of a scheduler service, the scheduler service must be cold-started.
16	2. jpomanevreset	In the description of the -a option, text has been added stating that the execution host name specified in the -s option of the ajsagtadd command must be specified.
17	2. jpomanevshow	A note on executing commands on a Windows Server 2008 PC has been added.

[Contents][Back][Next]

[Trademarks]