Job Management Partner 1/Automatic Job Management System 3 Command Reference 1

1.5.9 Commands used during special operation

This subsection shows the commands used during special operation such as when an old-version compatibility function or an optional function is being used.

For details about the commands used during special operation, see 3. Commands Used for Special Operation in the manual Job Management Partner 1/Automatic Job Management System 3 Command Reference 2.

Organization of this subsection

(1) Commands available when the JP1/AJS3 Console function is used

(2) Commands available in an execution environment for queue or submit jobs

(3) Commands available when queueless jobs are used

(4) Commands available during an operation test

(1) Commands available when the JP1/AJS3 Console function is used

The following table lists the commands available when the JP1/AJS3 Console function is used.

Table 1-16 Commands used during special operation (commands available when the JP1/AJS3 Console function is used)

Function Command name Windows UNIX Required privileges Supported products

Sets up JP1/AJS3 Console Manager. jp1ajs2cmsetup^# -- Y UNIX: Superuser M

Sets up JP1/AJS3 Console Agent. ajscasetup Y -- Windows:
Administrators M

Sets up JP1/AJS3 Console View. ajscvsetup Y -- Windows:
Administrators V

Sets up JP1/AJS3 Console Agent. jp1ajs2casetup^# -- Y UNIX: Superuser M

Sets up JP1/AJS3 Console Manager. ajscmsetup Y -- Windows:
Administrators M

Changes the size of the trace log file of JP1/AJS3 Console Manager. ajscmtrsetsz Y Y Windows: Administrators
UNIX: Superuser M

Changes the size of the trace log file of JP1/AJS3 Console Agent. ajscatrsetsz Y Y Windows: Administrators
UNIX: Superuser M

Automatically starts JP1/AJS3 Console Manager at a system start. jajscm_start -- Y UNIX: Superuser M

Automatically stops JP1/AJS3 Console Manager at a system stop. jajscm_stop -- Y UNIX: Superuser M

Automatically starts JP1/AJS3 Console Agent at a system start. jajsca_start -- Y UNIX: Superuser M

Automatically stops JP1/AJS3 Console Agent at a system stop. jajsca_stop -- Y UNIX: Superuser M

Starts or stops the JP1/AJS3 Console Manager service. ajscminetd_startstop -- Y UNIX: Superuser M

Starts or stops the JP1/AJS3 Console Agent service. ajscainetd_startstop -- Y UNIX: Superuser M

Starts JP1/AJS3 Console View. ajscon Y -- None V

Outputs definitions for specified JP1 users for JP1/AJS3 Console to a standard output file. ajscmprint Y Y Windows:
Administrators
UNIX: Superuser M

Legend:

Y: Supported

--: Not supported

M: JP1/AJS3 - Manager

V: JP1/AJS3 - View

#

Do not execute this command if a JP1 series product that requires JP1/Base is running.

Function	Command name	Windows	UNIX	Required privileges	Supported products
Sets up JP1/AJS3 Console Manager.	jp1ajs2cmsetup^#	--	Y	UNIX: Superuser	M
Sets up JP1/AJS3 Console Agent.	ajscasetup	Y	--	Windows: Administrators	M
Sets up JP1/AJS3 Console View.	ajscvsetup	Y	--	Windows: Administrators	V
Sets up JP1/AJS3 Console Agent.	jp1ajs2casetup^#	--	Y	UNIX: Superuser	M
Sets up JP1/AJS3 Console Manager.	ajscmsetup	Y	--	Windows: Administrators	M
Changes the size of the trace log file of JP1/AJS3 Console Manager.	ajscmtrsetsz	Y	Y	Windows: Administrators UNIX: Superuser	M
Changes the size of the trace log file of JP1/AJS3 Console Agent.	ajscatrsetsz	Y	Y	Windows: Administrators UNIX: Superuser	M
Automatically starts JP1/AJS3 Console Manager at a system start.	jajscm_start	--	Y	UNIX: Superuser	M
Automatically stops JP1/AJS3 Console Manager at a system stop.	jajscm_stop	--	Y	UNIX: Superuser	M
Automatically starts JP1/AJS3 Console Agent at a system start.	jajsca_start	--	Y	UNIX: Superuser	M
Automatically stops JP1/AJS3 Console Agent at a system stop.	jajsca_stop	--	Y	UNIX: Superuser	M
Starts or stops the JP1/AJS3 Console Manager service.	ajscminetd_startstop	--	Y	UNIX: Superuser	M
Starts or stops the JP1/AJS3 Console Agent service.	ajscainetd_startstop	--	Y	UNIX: Superuser	M
Starts JP1/AJS3 Console View.	ajscon	Y	--	None	V
Outputs definitions for specified JP1 users for JP1/AJS3 Console to a standard output file.	ajscmprint	Y	Y	Windows: Administrators UNIX: Superuser	M

(2) Commands available in an execution environment for queue or submit jobs

The following table lists the commands available in an execution environment for queue or submit jobs.

Note that to execute a command other than the jpqexport, jpqimport, and jajs_maintain commands, the OS user who executes the command must be registered as a JP1 user on the authentication server. Also make sure that the JP1 user is granted the proper permissions to execute the command. For details about command execution permissions, see 6.4 Setting access permissions in the Job Management Partner 1/Automatic Job Management System 3 System Design (Work Tasks) Guide.

Table 1-17 Commands used during special operation (commands available in an execution environment for queue or submit jobs)

Function Command name Windows UNIX Required privileges Supported products

Outputs the current job execution environment to a file. jpqexport Y Y Windows: Administrators
UNIX: Superuser M

Defines the job execution environment (job execution agents, queues, and exclusive execution resources) collectively using the job execution environment configuration definition file (jpqsetup.conf). jpqimport Y Y Windows: Administrators
UNIX: Superuser M

Performs maintenance on JP1/AJS3. jajs_maintain Y Y Windows: Administrators
UNIX: Superuser M

Registers a submit job. jpqjobsub Y Y Destination of a request to register a submit job
JP1_JPQ_Admin
JP1_JPQ_Operator
JP1_JPQ_User M and A

Cancels or kills the execution of a job. jpqjobcan Y Y Destination of a request to cancel a job
JP1_JPQ_Admin
JP1_JPQ_Operator
JP1_JPQ_User^#1
However, if the -em option is specified, the following privileges are required (and the above privileges are not required).
Windows: Administrators^#2
UNIX: Superuser M and A

Holds, or unholds the execution of a job. jpqjobalt Y Y Destination of a request to hold/unhold a job
JP1_JPQ_Admin
JP1_JPQ_Operator
JP1_JPQ_User^#1 M and A

Moves a job. jpqjobmove Y Y Destination of a request to move a job
JP1_JPQ_Admin
JP1_JPQ_Operator
JP1_JPQ_User^#1 M and A

Outputs information about a particular job to the standard output file. jpqjobget Y Y Destination of a request to acquire job information
JP1_JPQ_Admin
JP1_JPQ_Operator
JP1_JPQ_User^#1 M and A

Outputs a list of uncompleted jobs to the standard output file. jpqjobshow Y Y Destination of a request to acquire job information
JP1_JPQ_Admin
JP1_JPQ_Operator
JP1_JPQ_User^#1 M and A

Outputs a list of completed jobs to the standard output file. jpqendjobshow Y Y Destination of a request to acquire job information
JP1_JPQ_Admin
JP1_JPQ_Operator
JP1_JPQ_User^#1 M and A

Deletes information about completed jobs from the database. jpqjobdel Y Y Destination of a request to delete a job
JP1_JPQ_Admin
JP1_JPQ_Operator M and A

Opens a queue. jpqqueopen Y Y Destination of a request to open a queue
JP1_JPQ_Admin
JP1_JPQ_Operator
However, if the -em option is specified, the following privileges are required (and the above privileges are not required).
Windows: Administrators^#2
UNIX: Superuser M and A

Closes a queue. jpqqueclose Y Y Destination of a request to close a queue
JP1_JPQ_Admin
JP1_JPQ_Operator
However, if the -em option is specified, the following privileges are required (and the above privileges are not required).
Windows: Administrators^#2
UNIX: Superuser M and A

Outputs queue information to the standard output file. jpqqueshow Y Y Destination of a request to acquire queue information
JP1_JPQ_Admin
JP1_JPQ_Operator
JP1_JPQ_User
However, if the -em option is specified, the following privileges are required (and the above privileges are not required).
Windows: Administrators^#2
UNIX: Superuser M and A

Adds a queue. jpqqueadd Y Y Destination of a request to add a queue
JP1_JPQ_Admin M

Deletes a queue. jpqquedel Y Y Destination of a request to delete a queue
JP1_JPQ_Admin M

Changes a queue definition. jpqquealt Y Y Destination of a request to change a queue definition
JP1_JPQ_Admin
However, if the -em option is specified, the following privileges are required (and the above privilege is not required).
Windows: Administrators^#2
UNIX: Superuser M

Connects a queue to an agent; otherwise, changes the level of priority to a connected agent. jpqagtlink Y Y Destination of a request to connect an agent
JP1_JPQ_Admin
However, if the -em option is specified, the following privileges are required (and the above privilege is not required).
Windows: Administrators^#2
UNIX: Superuser M

Releases the connection between a queue and an agent. jpqagtunlink Y Y Destination of a request to cancel an agent connection
JP1_JPQ_Admin M

Outputs information about the agent host to the standard output file. jpqagtshow Y Y Destination of a request to acquire agent information
JP1_JPQ_Admin
However, if the -em option is specified, the following privileges are required (and the above privilege is not required).
Windows: Administrators^#2
UNIX: Superuser M and A

Adds an agent and creates a default queue at the same time. jpqagtadd Y Y Destination of a request to add an agent
JP1_JPQ_Admin M

Deletes an agent and deletes the default queue at the same time. jpqagtdel Y Y Destination of a request to delete an agent
JP1_JPQ_Admin M

Modifies the number of concurrently-executable jobs. jpqagtalt Y Y Destination of a request to change the number of concurrently-executable jobs
JP1_JPQ_Admin
However, if the -em option is specified, the following privileges are required (and the above privilege is not required).
Windows: Administrators^#2
UNIX: Superuser M and A

Outputs information about exclusive execution resources to the standard output file. jpqresshow Y Y Destination of a request to acquire exclusive execution resources
JP1_JPQ_Admin
JP1_JPQ_Operator
JP1_JPQ_User M

Adds exclusive execution resources. jpqresadd Y Y Destination of a request to add exclusive execution resources
JP1_JPQ_Admin M

Deletes exclusive execution resources. jpqresdel Y Y Destination of a request to delete exclusive execution resources
JP1_JPQ_Admin M

Legend:

Y: Supported

M: JP1/AJS3 - Manager

A: JP1/AJS3 - Agent

#1

With JP1_JPQ_User permission, the user can operate or view only jobs submitted by the user himself or herself.

#2

On a Windows Server 2008 host, before you execute a command that must be executed by a member of the Administrators group, make sure that you open the Command Prompt window as an administrator. To do this, on the Windows Start menu, right-click Command Prompt, and then choose Run as administrator. If the UAC function is disabled, you do not need to open the Command Prompt window as an administrator.

Function	Command name	Windows	UNIX	Required privileges	Supported products
Outputs the current job execution environment to a file.	jpqexport	Y	Y	Windows: Administrators UNIX: Superuser	M
Defines the job execution environment (job execution agents, queues, and exclusive execution resources) collectively using the job execution environment configuration definition file (jpqsetup.conf).	jpqimport	Y	Y	Windows: Administrators UNIX: Superuser	M
Performs maintenance on JP1/AJS3.	jajs_maintain	Y	Y	Windows: Administrators UNIX: Superuser	M
Registers a submit job.	jpqjobsub	Y	Y	Destination of a request to register a submit job JP1_JPQ_Admin JP1_JPQ_Operator JP1_JPQ_User	M and A
Cancels or kills the execution of a job.	jpqjobcan	Y	Y	Destination of a request to cancel a job JP1_JPQ_Admin JP1_JPQ_Operator JP1_JPQ_User^#1 However, if the -em option is specified, the following privileges are required (and the above privileges are not required). Windows: Administrators^#2 UNIX: Superuser	M and A
Holds, or unholds the execution of a job.	jpqjobalt	Y	Y	Destination of a request to hold/unhold a job JP1_JPQ_Admin JP1_JPQ_Operator JP1_JPQ_User^#1	M and A
Moves a job.	jpqjobmove	Y	Y	Destination of a request to move a job JP1_JPQ_Admin JP1_JPQ_Operator JP1_JPQ_User^#1	M and A
Outputs information about a particular job to the standard output file.	jpqjobget	Y	Y	Destination of a request to acquire job information JP1_JPQ_Admin JP1_JPQ_Operator JP1_JPQ_User^#1	M and A
Outputs a list of uncompleted jobs to the standard output file.	jpqjobshow	Y	Y	Destination of a request to acquire job information JP1_JPQ_Admin JP1_JPQ_Operator JP1_JPQ_User^#1	M and A
Outputs a list of completed jobs to the standard output file.	jpqendjobshow	Y	Y	Destination of a request to acquire job information JP1_JPQ_Admin JP1_JPQ_Operator JP1_JPQ_User^#1	M and A
Deletes information about completed jobs from the database.	jpqjobdel	Y	Y	Destination of a request to delete a job JP1_JPQ_Admin JP1_JPQ_Operator	M and A
Opens a queue.	jpqqueopen	Y	Y	Destination of a request to open a queue JP1_JPQ_Admin JP1_JPQ_Operator However, if the -em option is specified, the following privileges are required (and the above privileges are not required). Windows: Administrators^#2 UNIX: Superuser	M and A
Closes a queue.	jpqqueclose	Y	Y	Destination of a request to close a queue JP1_JPQ_Admin JP1_JPQ_Operator However, if the -em option is specified, the following privileges are required (and the above privileges are not required). Windows: Administrators^#2 UNIX: Superuser	M and A
Outputs queue information to the standard output file.	jpqqueshow	Y	Y	Destination of a request to acquire queue information JP1_JPQ_Admin JP1_JPQ_Operator JP1_JPQ_User However, if the -em option is specified, the following privileges are required (and the above privileges are not required). Windows: Administrators^#2 UNIX: Superuser	M and A
Adds a queue.	jpqqueadd	Y	Y	Destination of a request to add a queue JP1_JPQ_Admin	M
Deletes a queue.	jpqquedel	Y	Y	Destination of a request to delete a queue JP1_JPQ_Admin	M
Changes a queue definition.	jpqquealt	Y	Y	Destination of a request to change a queue definition JP1_JPQ_Admin However, if the -em option is specified, the following privileges are required (and the above privilege is not required). Windows: Administrators^#2 UNIX: Superuser	M
Connects a queue to an agent; otherwise, changes the level of priority to a connected agent.	jpqagtlink	Y	Y	Destination of a request to connect an agent JP1_JPQ_Admin However, if the -em option is specified, the following privileges are required (and the above privilege is not required). Windows: Administrators^#2 UNIX: Superuser	M
Releases the connection between a queue and an agent.	jpqagtunlink	Y	Y	Destination of a request to cancel an agent connection JP1_JPQ_Admin	M
Outputs information about the agent host to the standard output file.	jpqagtshow	Y	Y	Destination of a request to acquire agent information JP1_JPQ_Admin However, if the -em option is specified, the following privileges are required (and the above privilege is not required). Windows: Administrators^#2 UNIX: Superuser	M and A
Adds an agent and creates a default queue at the same time.	jpqagtadd	Y	Y	Destination of a request to add an agent JP1_JPQ_Admin	M
Deletes an agent and deletes the default queue at the same time.	jpqagtdel	Y	Y	Destination of a request to delete an agent JP1_JPQ_Admin	M
Modifies the number of concurrently-executable jobs.	jpqagtalt	Y	Y	Destination of a request to change the number of concurrently-executable jobs JP1_JPQ_Admin However, if the -em option is specified, the following privileges are required (and the above privilege is not required). Windows: Administrators^#2 UNIX: Superuser	M and A
Outputs information about exclusive execution resources to the standard output file.	jpqresshow	Y	Y	Destination of a request to acquire exclusive execution resources JP1_JPQ_Admin JP1_JPQ_Operator JP1_JPQ_User	M
Adds exclusive execution resources.	jpqresadd	Y	Y	Destination of a request to add exclusive execution resources JP1_JPQ_Admin	M
Deletes exclusive execution resources.	jpqresdel	Y	Y	Destination of a request to delete exclusive execution resources JP1_JPQ_Admin	M

(3) Commands available when queueless jobs are used

The following table lists the commands available when queueless jobs are used.

Table 1-18 Commands used during special operation (commands available when queueless jobs are used)

Function Command name Windows UNIX Required privileges Supported products

Sets up the execution environment for queueless jobs. ajsqlsetup Y Y Windows:
Administrators
UNIX: Superuser M and A

Temporarily modifies the operating environment for the queueless agent service. ajsqlalter Y Y Windows:
Administrators
UNIX: Superuser M and A

Adds hosts to be processed by the queueless agent service. ajsqlattach Y Y Windows:
Administrators
UNIX: Superuser M and A

Disconnects hosts processed by the queueless agent service. ajsqldetach Y Y Windows:
Administrators
UNIX: Superuser M and A

Starts the queueless file transfer service. ajsqlftpstart -- Y UNIX: Superuser M

Stops the queueless file transfer service. ajsqlftpstop Y Y Windows:
Administrators
UNIX: Superuser M

Starts the JP1/AJS3 Queueless Agent service. ajsqlstart -- Y UNIX: Superuser M and A

Stops the queueless agent service. ajsqlstop Y Y Windows:
Administrators
UNIX: Superuser M and A

Outputs detailed information about the queueless agent service. ajsqlstatus Y Y None M and A

Modifies the size of the trace log file for the queueless agent service. ajsqltrsetsz Y Y Windows:
Administrators
UNIX: Superuser M and A

Changes the size of the internal log file for execution of queueless jobs. ajsqlexecsetsz Y Y Windows:
Administrators
UNIX: Superuser M and A

Legend:

Y: Supported

--: Not supported

M: JP1/AJS3 - Manager

A: JP1/AJS3 - Agent

Function	Command name	Windows	UNIX	Required privileges	Supported products
Sets up the execution environment for queueless jobs.	ajsqlsetup	Y	Y	Windows: Administrators UNIX: Superuser	M and A
Temporarily modifies the operating environment for the queueless agent service.	ajsqlalter	Y	Y	Windows: Administrators UNIX: Superuser	M and A
Adds hosts to be processed by the queueless agent service.	ajsqlattach	Y	Y	Windows: Administrators UNIX: Superuser	M and A
Disconnects hosts processed by the queueless agent service.	ajsqldetach	Y	Y	Windows: Administrators UNIX: Superuser	M and A
Starts the queueless file transfer service.	ajsqlftpstart	--	Y	UNIX: Superuser	M
Stops the queueless file transfer service.	ajsqlftpstop	Y	Y	Windows: Administrators UNIX: Superuser	M
Starts the JP1/AJS3 Queueless Agent service.	ajsqlstart	--	Y	UNIX: Superuser	M and A
Stops the queueless agent service.	ajsqlstop	Y	Y	Windows: Administrators UNIX: Superuser	M and A
Outputs detailed information about the queueless agent service.	ajsqlstatus	Y	Y	None	M and A
Modifies the size of the trace log file for the queueless agent service.	ajsqltrsetsz	Y	Y	Windows: Administrators UNIX: Superuser	M and A
Changes the size of the internal log file for execution of queueless jobs.	ajsqlexecsetsz	Y	Y	Windows: Administrators UNIX: Superuser	M and A

(4) Commands available during an operation test

The following table lists the commands available during an operation test.

Table 1-19 Commands used during special operation (commands available during an operation test)

Function Command name Windows UNIX Required privileges Supported products

Changes and references the local time and date of the scheduler service. ajslocaldate Y Y Windows: Administrators
UNIX: Superuser M

Legend:

Y: Supported

M: JP1/AJS3 - Manager

Function	Command name	Windows	UNIX	Required privileges	Supported products
Changes and references the local time and date of the scheduler service.	ajslocaldate	Y	Y	Windows: Administrators UNIX: Superuser	M

[Contents][Back][Next]

[Trademarks]