Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1

14.1.5 Enabling the suspension function

When you edit the definition of a subunit of a root jobnet during registration for execution, you need to enable the suspension function so that the root jobnet can be suspended.

Initially, the suspension function of JP1/AJS3 is disabled. Use the ajssetup command to enable it.

To enable the suspension function:
Stop the JP1/AJS3 service.
Execute the following commands to confirm that all processes have stopped:
 
# /etc/opt/jp1ajs2/jajs_stop
# /opt/jp1ajs2/bin/jajs_spmd_status
 
Execute the following command to set up the environment for using the suspension function.
 
ajssetup -F scheduler-service-name -m
 
For details about the syntax of the ajssetup command and notes on the command, see ajssetup in 2. Commands Used during Setup in the manual Job Management Partner 1/Automatic Job Management System 3 Command Reference 2.
Restart the JP1/AJS3 service.
For details about changing the definition of a subunit of a root jobnet during registration for execution, see 4.5.15 Changing job and jobnet definitions without unregistering the jobnet in the manual Job Management Partner 1/Automatic Job Management System 3 Overview.

[Contents][Back][Next]

[Trademarks]