![[Contents]](FIGURE/CONTENT.GIF)
![[Index]](FIGURE/INDEX.GIF)
![[Back]](FIGURE/FRONT.GIF)
![[Next]](FIGURE/AFTER.GIF)
Job Management Partner 1/Integrated Management - Manager Administration Guide
This subsection explains how to back up JP1/IM configuration information.
If you change the JP1/IM configuration, make a backup. When you make a backup of JP1/IM, be sure to make a backup of JP1/Base at the same time. For details about how to back up the definition files that are configured by JP1/Base users, see the Job Management Partner 1/Base User's Guide.
Make a backup using a method of your choice, such as copying files. If at all possible, perform backup procedures while the JP1/IM services are stopped. If you must make a backup while these services are running, note the following points:
- The definition files may be modified during execution in some cases. If a backup is made while a definition file is being modified, the backup file will be corrupted.
Immediately following the backup operation, compare the collected backup file with the original file to make sure their contents match.
- When you make a backup, do not lock the target file. If you need to lock the file, first log out from all viewers that are connected, and then copy the target file to another file. After you have copied it, compare the copied file with the original file to make sure their contents match, and then back up the copied file.
The table below shows the JP1/IM files to back up. For a logical host, replace Console-path in the table with shared-folder\JP1Cons, replace Scope-path with shared-folder\JP1Scope.
Table 1-1 JP1/IM files to back up
Product name File name Description Common to all products Backup files created in 6.2.2(5) Copying the common definition information in the Job Management Partner 1/Integrated Management - Manager Configuration Guide Common definition information backup file#1 JP1/IM - Manager JP1/IM - Central Console Console-path\conf\jp1co_env.conf IM environment definition file Console-path\conf\jp1co_param.conf IM parameter definition file Console-path\conf\jp1co_param_V7.conf IM parameter definition file Console-path\conf\jp1co_service.conf Extended startup process definition file Console-path\conf\jp1co_system.conf IM server system environment settings file Console-path\conf\action\actdef.conf Automated action definition file Console-path\conf\console\actprofile\actprofile_JP1-user-name Action profile Console-path\conf\console\actprofile\actprofile2_JP1-user-name Console-path\conf\console\attribute\*.conf Definition file for extended event attributes Console-path\conf\console\filter\*.conf Filter definition file Console-path\conf\console\mapping\mapping.conf Event information mapping definition file Console-path\conf\console\monitor\*.conf Definition file for opening monitor windows Console-path\conf\console\object_type\* Definition file for object types Console-path\conf\console\profile\.system System profile Console-path\conf\console\profile\defaultUser JP1/IM - View user profile (default) Console-path\conf\console\profile\profile_user-name JP1/IM - View user profile Console-path\www\console.html#2 Web-based operation definition file Console-path\default\console.conf#2 Communication environment definition file Console-path\conf\console\correlation\view_cor_user-name.conf Settings file for the consolidated display of repeated events Console-path\conf\health\jcohc.conf Health check definition file Console-path\conf\action\actnotice.conf Automatic action notification definition file Console-path\conf\processupdate\processupdate.conf Status event definition file Console-path\conf\guide\jco_guide.txt Event guide information file user-selected-folder\user-selected-file-name Event guide message file All files under Console-path\conf\evgen\ Definition files for correlation event generation user-selected-folder\file-name.conf Correlation event generation definition file Console-path\conf\action\attr_list\attr_list.conf File that defines which items are displayed for event conditions Console-path\conf\chsev\jcochsev.conf Severity changing definition file JP1/IM - Central Scope Scope-path\conf\jcs_guide.txt Guide information file Scope-path\conf\jcs_hosts Host information file Scope-path\conf\action_complete_on.conf Settings file for completed-action linkage function Scope-path\conf\action_complete_off.conf user-selected-folder\user-selected-file-name Definition file for automatic delete mode of status change event user-selected-folder\user-selected-file-name Definition file for monitoring object initialization mode Scope-path\conf\auto_dbbackup_on.conf Backup recovery settings file for monitored object database Scope-path\conf\auto_dbbackup_off.conf Scope-path\conf\evhist_warn_event_on.conf Settings file for the maximum number of status change events Scope-path\conf\evhist_warn_event_off.conf user-selected-folder\user-selected-file-name Guide message file user-selected-folder\user-selected-file-name Definition file for on memory mode of status change condition JP1/IM - View View-path\conf\webdata\en\*.html Web page call definition file View-path\conf\tuning.conf IM - View settings file View-path\default\view.conf.update Communication environment definition file View-path\default\tree_view.conf.update View-path\conf\sovtoolexec\en\!JP1_CS_APP0.conf Start program definition file View-path\conf\sovtoolitem\en\!JP1_CS_FTOOL0.conf Toolbar definition file View-path\conf\sovtoolitem\en\!JP1_CS_FTREE0.conf Icon operation definition file View-path\conf\appexecute\en\*.conf Definition file for executing applications View-path\conf\function\en\*.conf Definition file for the tool launcher user-selected-folder\user-selected-file-name Configuration file for monitoring tree Files under View-path\image\icon\ Icon file Files under View-path\image\visual\ Visual icon file#3 View-path\conf\jcfview\jcfview.conf Operation definition file for IM Configuration Management - View View-path\conf\jrmview\jrmview.conf Operation definition file for Rule Operation - View#4 View-path\default\jrmview_reg.conf Common definition settings file#4 #1: The common definition information backup file backs up the definition information of a logical host in a cluster system. This backup file is created during setup of the cluster system. This backup file backs up the definition information of JP1/IM as well as JP1/Base, JP1/AJS, and Version 06-02 and later of JP1/Power Monitor. For details, see 6.1.3(5) Setting common definition information in the Job Management Partner 1/Integrated Management - Manager Configuration Guide.
#2: This file exists only on a physical host.
#3: Files added by the user are backed up.
#4: This file is used by JP1/IM - View (the part linked to JP1/IM - Rule Operation).
All Rights Reserved. Copyright (C) 2009, Hitachi, Ltd.