Job Management Partner 1/Performance Management - Remote Monitor for Platform Description, User's Guide and Reference

Appendix E.3 List of properties of remote agents and group agents

The following table lists and describes the properties of remote agents and group agents of PFM - RM for Platform.

Table E-3 List of properties of remote agents and group agents of PFM - RM for Platform

Directory name Property name Description Remote agent Group agent

-- Data Model Version Displays the version of the data model. D D

Remote Monitoring -- Stores the properties of the remote agent or group agent. D D

Agent Type Displays the type of agent:

For remote agent
Remote Agent is displayed.

For group agent
Group Agent is displayed.

D D

Remote Monitor Name Displays the service ID of PFM - RM for Platform. D D

Target Name Displays the name of the monitoring target. D N

Target Host Displays the name of the monitored host. D N

Group Name Displays the group name. N D

Primary Host Displays the primary host name. N D

Grouping Targets Displays a list of target names that are to be summarized. N D

Detail Records -- Stores the properties of records of the PD record type. The record IDs of the collected records are displayed in boldface type. D D

Detail Records record-ID^#1 -- Stores the properties of a record. D D

Description Displays a description of the record. D D

Log Displays Yes or No indicating whether records are to be recorded in the Store database of PFM - RM for Platform. If this value is set to Yes and Collection Interval is set to a value greater than 0, the record is recorded into the database. U U

Collection Interval Specifies the data collection interval. The permitted value is from 0 to 2,147,483,647 seconds in increments of 1. If you specify 0 for the property, 0 seconds is assumed, in which case no data is collected. D^#2 D^#2

Collection Offset Specifies the offset value (in seconds) for starting data collection. This value must be in the range from 0 to 32,767 seconds but cannot exceed the value specified for Collection Interval. The data collection logging time does not depend on the Collection Offset value and is the same as the Collection Interval. D^#2 D^#2

LOGIF Specifies the conditions for storing records in the database. Only records that satisfy the conditions are stored in the database. The system displays the conditional expression (character string) that was created in the LOGIF Expression Editor window, which is displayed by clicking LOGIF in the lower frame of the properties window for the service that is displayed on PFM - Web Console's Services page. D^#2 D^#2

Interval Records -- Stores the properties of records of the PI record type. The record IDs of the collected records are displayed in boldface type. D D

Interval Records record-ID^#1 -- Stores the properties of a record. D D

Description Displays a description of the record. You cannot change this property. D D

Log Displays Yes or No indicating whether records are to be recorded in the Store database of PFM - RM for Platform. If this value is set to Yes and Collection Interval is set to a value greater than 0, the record is recorded into the database. U U

Collection Interval Specifies the data collection interval. The permitted value is from 0 to 2,147,483,647 seconds in increments of 1. If you specify 0 for the property, 0 seconds is assumed, in which case no data is collected. D^#2 D^#2

Collection Offset Specifies the offset value (in seconds) for starting data collection. This value must be in the range from 0 to 32,767 seconds but cannot exceed the value specified for Collection Interval. The data collection logging time does not depend on the Collection Offset value and is the same as the Collection Interval. D^#2 D^#2

LOGIF Specifies the conditions for storing records in the database. Only records that satisfy the conditions are stored in the database. The system displays the conditional expression (character string) that was created in the LOGIF Expression Editor window, which is displayed by clicking LOGIF in the lower frame of the properties window for the service that is displayed on PFM - Web Console's Services page. D^#2 D^#2

Remote Monitor Configuration -- Stores the setting properties specific to the monitoring target. D N

Remote Monitor Configuration Target -- Displays an overview of the service of the remote agent. D N

User Specifies the user that is to connect to the monitored host. U N

Password **** (fixed) is displayed. You cannot change this property. This property is applicable to Windows only. D N

Domain Specifies the domain name to which the monitored host belongs. This property is applicable to Windows only. U N

Private_Key_File Specifies the name of the private key file that is to be used with the SSH public key method. This property is applicable to UNIX only. U N

Port This is the port number of the SSH server on the monitored host. This property is applicable to UNIX only. U N

Legend:

--: Not applicable

U: Displayed and updatable

D: Displayed but not updatable

N: Not displayed

#1

The directory name shows the record ID without the database ID. For details about the record ID of each record, see 5. Records.

#2

The value set by PFM - RM for Platform is displayed.

Directory name	Property name	Description	Remote agent	Group agent
--	Data Model Version	Displays the version of the data model.	D	D
Remote Monitoring	--	Stores the properties of the remote agent or group agent.	D	D
Agent Type	Displays the type of agent: For remote agent Remote Agent is displayed. For group agent Group Agent is displayed.	D	D
Remote Monitor Name	Displays the service ID of PFM - RM for Platform.	D	D
Target Name	Displays the name of the monitoring target.	D	N
Target Host	Displays the name of the monitored host.	D	N
Group Name	Displays the group name.	N	D
Primary Host	Displays the primary host name.	N	D
Grouping Targets	Displays a list of target names that are to be summarized.	N	D
Detail Records	--	Stores the properties of records of the PD record type. The record IDs of the collected records are displayed in boldface type.	D	D
Detail Records	record-ID^#1	--	Stores the properties of a record.	D	D
Description	Displays a description of the record.	D	D
Log	Displays Yes or No indicating whether records are to be recorded in the Store database of PFM - RM for Platform. If this value is set to Yes and Collection Interval is set to a value greater than 0, the record is recorded into the database.	U	U
Collection Interval	Specifies the data collection interval. The permitted value is from 0 to 2,147,483,647 seconds in increments of 1. If you specify 0 for the property, 0 seconds is assumed, in which case no data is collected.	D^#2	D^#2
Collection Offset	Specifies the offset value (in seconds) for starting data collection. This value must be in the range from 0 to 32,767 seconds but cannot exceed the value specified for Collection Interval. The data collection logging time does not depend on the Collection Offset value and is the same as the Collection Interval.	D^#2	D^#2
LOGIF	Specifies the conditions for storing records in the database. Only records that satisfy the conditions are stored in the database. The system displays the conditional expression (character string) that was created in the LOGIF Expression Editor window, which is displayed by clicking LOGIF in the lower frame of the properties window for the service that is displayed on PFM - Web Console's Services page.	D^#2	D^#2
Interval Records	--	Stores the properties of records of the PI record type. The record IDs of the collected records are displayed in boldface type.	D	D
Interval Records	record-ID^#1	--	Stores the properties of a record.	D	D
Description	Displays a description of the record. You cannot change this property.	D	D
Log	Displays Yes or No indicating whether records are to be recorded in the Store database of PFM - RM for Platform. If this value is set to Yes and Collection Interval is set to a value greater than 0, the record is recorded into the database.	U	U
Collection Interval	Specifies the data collection interval. The permitted value is from 0 to 2,147,483,647 seconds in increments of 1. If you specify 0 for the property, 0 seconds is assumed, in which case no data is collected.	D^#2	D^#2
Collection Offset	Specifies the offset value (in seconds) for starting data collection. This value must be in the range from 0 to 32,767 seconds but cannot exceed the value specified for Collection Interval. The data collection logging time does not depend on the Collection Offset value and is the same as the Collection Interval.	D^#2	D^#2
LOGIF	Specifies the conditions for storing records in the database. Only records that satisfy the conditions are stored in the database. The system displays the conditional expression (character string) that was created in the LOGIF Expression Editor window, which is displayed by clicking LOGIF in the lower frame of the properties window for the service that is displayed on PFM - Web Console's Services page.	D^#2	D^#2
Remote Monitor Configuration	--	Stores the setting properties specific to the monitoring target.	D	N
Remote Monitor Configuration	Target	--	Displays an overview of the service of the remote agent.	D	N
User	Specifies the user that is to connect to the monitored host.	U	N
Password	**** (fixed) is displayed. You cannot change this property. This property is applicable to Windows only.	D	N
Domain	Specifies the domain name to which the monitored host belongs. This property is applicable to Windows only.	U	N
Private_Key_File	Specifies the name of the private key file that is to be used with the SSH public key method. This property is applicable to UNIX only.	U	N
Port	This is the port number of the SSH server on the monitored host. This property is applicable to UNIX only.	U	N

[Contents][Back][Next]

[Trademarks]