Job Management Partner 1/Performance Management - Remote Monitor for Platform Description, User's Guide and Reference

Used Swap Mbytes

Overview

The Used Swap Mbytes alarm monitors the memory usage status.

Main settings

Table 4-18 Alarm property settings in PFM - Web Console (Used Swap Mbytes)

Alarm properties in PFM - Web Console Setting

Item Details

Main Information Product RM Platform

Message Used swap is %CVS megabytes

Enable alarm Selected

Monitoring time range Always monitor

Report alarm when the following damping condition is reached Selected

Interval(s) 3

occurrence(s) during 2

Action Email --

Command --

SNMP Abnormal, Warning, Normal

Conditional expression Record System Summary (PI)

Field Used Swap Mbytes

Abnormal condition Used Swap Mbytes >= 1024^#1

Warning condition Used Swap Mbytes >= 1024^#2

Legend:

--: The setting is always ignored.

#1

A guideline for the value to be set is about 90% of the value set for Total Swap Mbytes.

#2

Set the same value as for Total Mem Mbytes.

Alarm properties in PFM - Web Console	Setting
Item	Details
Main Information	Product	RM Platform
Message	Used swap is %CVS megabytes
Enable alarm	Selected
Monitoring time range	Always monitor
Report alarm when the following damping condition is reached	Selected
Interval(s)	3
occurrence(s) during	2
Action	Email	--
Command	--
SNMP	Abnormal, Warning, Normal
Conditional expression	Record	System Summary (PI)
Field	Used Swap Mbytes
Abnormal condition	Used Swap Mbytes >= 1024^#1
Warning condition	Used Swap Mbytes >= 1024^#2

Alarm table

PFM RM Platform Template Alarms 09.00

Related reports

Reports/RM Platform/Troubleshooting/Real-Time/Pool Nonpaged Status

Note

1024 is set as the value for this alarm for both abnormal and warning conditions. To use this alarm, change the values for abnormal and warning conditions as appropriate to the user's environment.

[Contents][Back][Next]

[Trademarks]