Job Management Partner 1/Performance Management - Remote Monitor for Platform Description, User's Guide and Reference

Disk Busy %

Overview

The Disk Busy % alarm monitors the disk busy rate (%). The monitored value is the percentage of time the disk was busy during read and write request processing.

This value may exceed 100 if processing for the device is executed continuously.

Main settings

Table 4-5 Alarm property settings in PFM - Web Console (Disk Busy %)

Alarm properties in PFM - Web Console Setting

Item Details

Main Information Product RM Platform

Message Disk busy(%CVS1) is %CVS2%

Enable alarm Selected

Monitoring time range Always monitor

Report alarm when the following damping condition is reached Selected

Interval(s) 5

occurrence(s) during 4

Action Email --

Command --

SNMP Abnormal, Warning, Normal

Conditional expression Record Physical Disk Overview (PI_PDSK)

Field

ID

Busy %

Abnormal condition ID <> "_Total"
AND (Busy % >= "90")

Warning condition ID <> "_Total"
AND (Busy % >= "80")

Legend:

--: The setting is always ignored.

Alarm properties in PFM - Web Console	Setting
Item	Details
Main Information	Product	RM Platform
Message	Disk busy(%CVS1) is %CVS2%
Enable alarm	Selected
Monitoring time range	Always monitor
Report alarm when the following damping condition is reached	Selected
Interval(s)	5
occurrence(s) during	4
Action	Email	--
Command	--
SNMP	Abnormal, Warning, Normal
Conditional expression	Record	Physical Disk Overview (PI_PDSK)
Field	ID Busy %
Abnormal condition	ID <> "_Total" AND (Busy % >= "90")
Warning condition	ID <> "_Total" AND (Busy % >= "80")

Alarm table

PFM RM Platform Template Alarms 09.00

Related reports

Reports/RM Platform/Troubleshooting/Real-Time/Physical Disk Busy Status

Note

To display a value in the message text, set a field in the alarm condition expression. For the Disk Busy % alarm, a condition value that always satisfies the ID field is specified.

[Contents][Back][Next]

[Trademarks]