The following table lists and describes the compatibility parameters that can be specified in common for the logical J2EE server. In the table below, Default value means the value that is assumed when the parameter is not specified. Recommended value of param-name is the recommended parameter corresponding to the parameters for compatibility.

Table C-3 Parameters that can be specified in the logical J2EE server (for compatibility) (often used keys)

Value of param-name	Contents	Specifiable value	Default value	VR
mngagent.vbroker.se.iiop_tp.host.value	Specifies whether to fix the Management Agent host of the J2EE container. Specify one of the following values: true: The host will be fixed. false: The host will not be fixed.	Specify one of the following values: true false	false	06-50 07-00
mngagent.vbroker.se.iiop_tp.scm.iiop_tp.listener.port.value	Specifies the Management Agent port number of the J2EE container in the range from 0 to 65535. 0 indicates Automatic.	Specify the value using an integer from 0 to 65535.	0	06-50 07-00

Table C-4 Parameters that can be specified in the logical J2EE server (for compatibility)

Value of param-name	Value specified in param-value	Default value	Recommended param-name value
add.jvm.arg.m	Sets up the extension startup parameter. Specifies the JavaVM options that can be specified when you start JavaVM.#1	None	add.jvm.arg
ejbserver.manager.jp1event.enabled	Specifies whether to enable the JP1 event issuing functionality. true: Enable false: Disable	false	ejbserver.manager.agent.JP1EventAgent.enabled
ejbserver.rmi.naming.host.value	Specifies the host of the RMI registry and MBean server that the J2EE server uses in the multi-homed host environment. true: The host name or IP address that can reference the network of the host defined in "management domain configuration definition" is set up. false: The host name or IP address is not set up. etc: The loopback address (localhost) is set up.	false	ejbserver.rmi.naming.host
ex.param.m	Specifies the J2EE server extension parameter in any option #1 used in the J2EE server.	None	ex.param
ex.properties.m	Specifies the JavaVM system properties. #1	None	ex.properties
http	Specifies the port number of the simple Web server in a range from 1 to 65535.	8080	ejbserver.http.port
inprocess.ns.port	Specifies the port number for the in-process naming service in the range from 1 to 65535.	900	ejbserver.naming.startupMode,ejbserver.naming.host,ejbserver.naming.port
inprocess.ns.retryCount	Specifies the retry count to wait for the in-process naming service to start completely in the range from 0 to 2147483647.	9	ejbserver.naming.startupRetryCount
inprocess.ns.waitTime	Specifies the waiting time for the in-process naming service to start completely in the range from 0 to 2147483647 (unit: seconds).	1	ejbserver.naming.startupWaitTime
jndi.rr.ns.list	Specifies the group name and the group members of a round-robin search. Group-name = member-name-1[; member-name-2] #2 Note Specify CTM, J2EE server, or logical server name of the naming service as the member name.	None	ejbserver.jndi.namingservice.group.list
jvm.ms.size	Specifies the initial size of memory required for JavaVM in a range from 0 to 9999999999 (unit: megabytes). Specify a value which consists of the relationship jvm.ms.size jvm.mx.size.	256	add.jvm.arg
jvm.mx.size	Specifies the maximum size of memory required for JavaVM in a range from 0 to 9999999999 (unit: megabyte). Specify a value which consists of the relationship jvm.ms.size jvm.mx.size.	512	add.jvm.arg
LogFile.Console.filenum	Specifies the number of console log files. You can specify 1, 2, 4, 8, and 16.	2	ejbserver.logger.channels.define.ConsoleLogFile.filenum
LogFile.Console.filesize	Specifies the size of a console log file in bytes. You can specify 4096, 65536, 262144, 524288, 1048576, 2097152, 4194304, 16777216, and 67108864.	1048576	ejbserver.logger.channels.define.ConsoleLogFile.filesize
LogFile.EJBContainer.filenum	Specifies the number of EJB container maintenance log files. You can specify 1, 2, 4, 8, and 16.	2	ejbserver.logger.channels.define.EJBContainerLogFile.filenum
LogFile.EJBContainer.filesize	Specifies the size of an EJB container maintenance log file in bytes. You can specify 4096, 65536, 262144, 524288, 1048576, 2097152, 4194304, 16777216, and 67108864.	1048576	ejbserver.logger.channels.define.EJBContainerLogFile.filesize
LogFile.Exception.filenum	Specifies the number of exception log files. You can specify 1, 2, 4, 8, and 16.	2	ejbserver.logger.channels.define.ExceptionLogFile.filenum
LogFile.Exception.filesize	Specifies the size of an exception log file in bytes. You can specify 4096, 65536, 262144, 524288, 1048576, 2097152, 4194304, 16777216, and 67108864.	1048576	ejbserver.logger.channels.define.ExceptionLogFile.filesize
LogFile.Maintenance.filenum	Specifies the number of maintenance log files. You can specify 1, 2, 4, 8, and 16.	4	ejbserver.logger.channels.define.MaintenanceLogFile.filenum
LogFile.Maintenance.filesize	Specifies the size of a maintenance log file in bytes. You can specify 4096, 65536, 262144, 524288, 1048576, 2097152, 4194304, 16777216, and 67108864.	16777216	ejbserver.logger.channels.define.MaintenanceLogFile.filesize
LogFile.Message.filenum	Specifies the number of message log files. You can specify 1, 2, 4, 8, and 16.	2	ejbserver.logger.channels.define.MessageLogFile.filenum
LogFile.Message.filesize	Specifies the size of a message log file in bytes. You can specify 4096, 65536, 262144, 524288, 1048576, 2097152, 4194304, 16777216, and 67108864.	1048576	ejbserver.logger.channels.define.MessageLogFile.filesize
LogFile.UserErr.filenum	Specifies the number of user error log files. You can specify 1, 2, 4, 8, and 16.	2	ejbserver.logger.channels.define.UserErrLogFile.filenum
LogFile.UserErr.filesize	Specifies the size of a user error log file in bytes. You can specify 4096, 65536, 262144, 524288, 1048576, 2097152, 4194304, 16777216, and 67108864.	1048576	ejbserver.logger.channels.define.UserErrLogFile.filesize
LogFile.UserOut.filenum	Specifies the number of user output log files. You can specify 1, 2, 4, 8, and 16.	2	ejbserver.logger.channels.define.UserOutLogFile.filenum
LogFile.UserOut.filesize	Specifies the size of a user output log file in bytes. You can specify 4096, 65536, 262144, 524288, 1048576, 2097152, 4194304, 16777216, and 67108864.	1048576	ejbserver.logger.channels.define.UserOutLogFile.filesize
LogFile.WebAccess.filenum	Specifies the number of Web Container trace log files. You can specify 1, 2, 4, 8, and 16.	16	ejbserver.logger.channels.define.WebAccessLogFile.filenum
LogFile.WebAccess.filesize	Specifies the size of a Web Container trace log file in bytes. You can specify 4096, 65536, 262144, 524288, 1048576, 2097152, 4194304, 16777216, and 67108864.	4194304	ejbserver.logger.channels.define.WebAccessLogFile.filesize
LogFile.WebContainer.filenum	Specifies the number of Web Container maintenance log files. You can specify 1, 2, 4, 8, and 16.	2	ejbserver.logger.channels.define.WebContainerLogFile.filenum
LogFile.WebContainer.filesize	Specifies the size of a Web Container maintenance log file in bytes. You can specify 4096, 65536, 262144, 524288, 1048576, 2097152, 4194304, 16777216, and 67108864.	1048576	ejbserver.logger.channels.define.WebContainerLogFile.filesize
LogFile.WebServlet.filenum	Specifies the number of Web servlet log files. You can specify 1, 2, 4, 8, and 16.	4	ejbserver.logger.channels.define.WebServletLogFile.filenum
LogFile.WebServlet.filesize	Specifies the size of a Web servlet log file in bytes. You can specify 4096, 65536, 262144, 524288, 1048576, 2097152, 4194304, 16777216, and 67108864.	4194304	ejbserver.logger.channels.define.WebServletLogFile.filesize
loglevel	Specifies the log output level. Error: Normal operations Error,Warning: Normal operations (verbose) Error,Warning,Information: During testing Error,Warning,Information,Debug: Troubleshooting	Error	ejbserver.logger.enabled. #
manager.mevent.sender.bind.host.value	Specifies whether to fix the local address of the Management event issuing functionality. true: The address is fixed. false: The address is not fixed.	false	manager.mevent.sender.bind.host
mngagent.connector.host.value	Specifies whether to fix the Management Agent host of the J2EE container. true: The host is fixed false: The host is not fixed	false	mngagent.connector.host
mngagent.connector.port.value	Specifies the Management Agent port number of the J2EE container in the range from 0 to 65535. 0 indicates Automatic.	0 (automatic)	mngagent.connector.port
mngagent.vbroker.se.iiop_tp.host.value	Specifies whether to fix the Management Agent host of the J2EE container. true: The host is fixed false: The host is not fixed	false	mngagent.connector.host
mngagent.vbroker.se.iiop_tp.scm.iiop_tp.listener.port.value	Specifies the Management Agent port number of the J2EE container in the range from 0 to 65535. 0 indicates Automatic.	0 (automatic)	mngagent.connector.port
vbroker.se.iiop_tp.host.value	Specifies whether to fix the host in the EJB container. true: The host is fixed false: The host is not fixed etc: Receive the connection for the loopback address (localhost).	false	vbroker.se.iiop_tp.host
WatchFile.ConnectionPool.filenum	Specifies the number of monitoring result output files for the connection pool. You can specify 1, 2, 4, 8, and 16.	2	ejbserver.logger.channels.define.ConnectionPoolWatchLogFile.filenum
WatchFile.ConnectionPool.filesize	Specifies the size of a monitoring result output file for the connection pool in bytes. You can specify 4096, 65536, 262144, 524288, 1048576, 2097152, 4194304, 16777216, and 67108864.	1048576	ejbserver.logger.channels.define.ConnectionPoolWatchLogFile.filesize
WatchFile.FileDescriptor.filenum	Specifies the number of monitoring result output files for the file descriptors. You can specify 1, 2, 4, 8, and 16.	2	ejbserver.logger.channels.define.FileDescriptorWatchLogFile.filenum
WatchFile.FileDescriptor.filesize	Specifies the size of the monitoring result output file for the file descriptors in bytes. You can specify 4096, 65536, 262144, 524288, 1048576, 2097152, 4194304, 16777216, and 67108864.	1048576	ejbserver.logger.channels.define.FileDescriptorWatchLogFile.filesize
WatchFile.HttpSession.filenum	Specifies the number of monitoring result output files for the HTTP sessions. You can specify 1, 2, 4, 8, and 16.	2	ejbserver.logger.channels.define.HttpSessionWatchLogFile.filenum
WatchFile.HttpSession.filesize	Specifies the size of the monitoring result output file for the HTTP sessions in bytes. You can specify 4096, 65536, 262144, 524288, 1048576, 2097152, 4194304, 16777216, and 67108864.	1048576	ejbserver.logger.channels.define.HttpSessionWatchLogFile.filesize
WatchFile.Memory.filenum	Specifies the number of monitoring result output files for memory. You can specify 1, 2, 4, 8, and 16.	2	ejbserver.logger.channels.define.MemoryWatchLogFile.filenum
WatchFile.Memory.filesize	Specifies the size of the monitoring result output file for memory in bytes. You can specify 4096, 65536, 262144, 524288, 1048576, 2097152, 4194304, 16777216, and 67108864.	1048576	ejbserver.logger.channels.define.MemoryWatchLogFile.filesize
WatchFile.RequestQueue.filenum	Specifies the number of monitoring result output files for each Web container, Web application, and the default HTTP request pending queue. You can specify 1, 2, 4, 8, and 16.	2	ejbserver.logger.channels.define.RequestQueueWatchLogFile.filenum
WatchFile.RequestQueue.filesize	Specifies the size of monitoring result output file for each Web container, Web application, and the default HTTP request pending queue in bytes. You can specify 4096, 65536, 262144, 524288, 1048576, 2097152, 4194304, 16777216, and 67108864.	1048576	ejbserver.logger.channels.define.RequestQueueWatchLogFile.filesize
WatchFile.Thread.filenum	Specifies the number of monitoring result output files for threads. You can specify 1, 2, 4, 8, and 16.	2	ejbserver.logger.channels.define.ThreadWatchLogFile.filenum
WatchFile.Thread.filesize	Specifies the size of the monitoring result output file for threads in bytes. You can specify 4096, 65536, 262144, 524288, 1048576, 2097152, 4194304, 16777216, and 67108864.	1048576	ejbserver.logger.channels.define.ThreadWatchLogFile.filesize
WatchFile.Threaddump.filenum	Specifies the number of monitoring result output files for the thread dump files. You can specify 1, 2, 4, 8, and 16.	2	ejbserver.logger.channels.define.ThreaddumpWatchLogFile.filenum
WatchFile.Threaddump.filesize	Specifies the size of the monitoring result output file for the thread dump files in bytes. You can specify 4096, 65536, 262144, 524288, 1048576, 2097152, 4194304, 16777216, and 67108864.	1048576	ejbserver.logger.channels.define.ThreaddumpWatchLogFile.filesize
webserver.connector.ajp13.bind_host.value	Specifies whether to fix the host in the settings for connecting the Web container to the Web server. true: The host is fixed. false: The host is not fixed. etc: Connection is received for the loopback address (localhost).	false	webserver.connector.ajp13.bind_host
webserver.connector.http.bind_host.value	Specifies whether to fix the host in the settings for the Web container management server (Simple Web server). true: The host is fixed. false: The host is not fixed.	false	webserver.connector.http.bind_host
webserver.sfo.sfo_server.server-definition-name-of-SFO-filter.serverName	Specifies the SFO server name associated with the server definition name of the SFO filter using 128 or less characters.	None	webserver.sfo.sfo_server.server-definition-name-of-SFO-filter.naming

#1

To specify multiple values, specify multiple <param-value>.

Also, to enable a parameter, add '.' at the beginning of the string. If you want to disable a parameter, add '#' at the beginning of the string.

(Example)

<param-name>ex.param.m</param-name>

<param-value>.ssss</param-value>

<param-value>#rrrr</param-value>

#2

To specify multiple values in param-value, use comma (, ) as the delimiter.

(Example) <param-value> value 1, value 2, value 3 <param-value>