The following table describes the parameters beginning with cosminexus.jpa. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(a) Keys beginning with cosminexus.jpa. When you reference the section, read the key as parameter.

Table 4-11 Parameters beginning with cosminexus.jpa

Value of param-name	Specifiable value	Default value	VR
cosminexus.jpa.logging.level.operation.category	The following strings can be specified: Off Information Detail	Off	08-00
cosminexus.jpa.exception.logging.sql	The following strings can be specified: Off Information Detail	Off	08-00

The following table describes the parameters beginning with ejbserver.application. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(b) Keys beginning with ejbserver.application. When you reference the section, read the key as parameter.

Table 4-12 Parameters beginning with ejbserver.application

Value of param-name	Specifiable value	Default value	VR
ejbserver.application.InitTermProcessClasses#1	Specify any string.	None	06-50
ejbserver.application.userlog.CJLogHandler.handler-name.appname	Specify single byte character set of 0 to 16 bytes using the following characters: Alphanumeric characters Period (.) Dollar sign ($) Underscore (_) Stroke (|) Colon (:) Ampersand (&) At sign (@) Hash (#) Percent (%) Hyphen (-)	user_app	06-50 07-00
ejbserver.application.userlog.CJLogHandler.handler-name.count	(If CJMessageFileHandler is used) 2-16 (If CJMPMessageFileHandler is used) 2-64	2	06-50 07-00
ejbserver.application.userlog.CJLogHandler.handler-name.encoding	Specify 0 to 1024 bytes using the following characters: Alphanumeric characters Plus '+' Colon (:) Period (.) Underscore (_) Hyphen (-)	None	06-50 07-00
ejbserver.application.userlog.CJLogHandler.handler-name.filter	Specify a class character set of 0 to 4096 bytes using the following characters: Alphanumeric characters Period (.) Dollar sign ($) Underscore (_)	None	06-50 07-00
ejbserver.application.userlog.CJLogHandler.handler-name.formatter	Specify a class character set of 0 to 4096 bytes using the following characters: Alphanumeric characters Period (.) Dollar sign ($) Underscore (_)	None	06-50 07-00
ejbserver.application.userlog.CJLogHandler.handler-name.level	The following strings can be specified: OFF SEVERE WARNING INFO CONFIG FINE FINER FINEST ALL	SEVERE	06-50 07-00
ejbserver.application.userlog.CJLogHandler.handler-name.limit	(If CJMessageFileHandler is used) 8192-2147483647 (If CJMPMessageFileHandler is used) 8192-16777216	1048576	06-50 07-00 07-50
ejbserver.application.userlog.CJLogHandler.handler-name.msgid	Specify single byte character set of 0 to 21 bytes using the following characters: Alphanumeric characters Period (.) Dollar sign ($) Underscore (_) Stroke (|) Colon (:) Ampersand (&) At sign (@) Hash (#) Percent (%) Hyphen (-)	0001	06-50 07-00
ejbserver.application.userlog.CJLogHandler.handler-name.path	Specify any string in the range of 1 to 255 bytes.	user_log	06-50
ejbserver.application.userlog.CJLogHandler.handler-name.separator	Specify single byte character set of 0 to 1024 bytes using the following characters: Alphanumeric characters Period (.) Dollar sign ($) Underscore (_) Stroke (|) Colon (:) Ampersand (&) At sign (@) Hash (#) Percent (%) Hyphen (-)	Stroke (|)	06-50 07-00
ejbserver.application.userlog.Logger.logger-name.filter	Specify a class character set of 0 to 4096 bytes using the following characters: Alphanumeric characters Period (.) Dollar sign ($) Underscore (_)	None	06-50 07-00
ejbserver.application.userlog.Logger.logger-name.handlers#1	Specify a class character set of 1 to 1024 bytes beginning with alphanumeric characters. Also, when specifying multiple values, delimit with commas (,).	None	06-50 07-00
ejbserver.application.userlog.Logger.logger-name.level	The following strings can be specified: OFF SEVERE WARNING INFO CONFIG FINE FINER FINEST ALL null	SEVERE	06-50
ejbserver.application.userlog.Logger.logger-name.useParentHandlers	The following strings can be specified: true false	true	06-50
ejbserver.application.userlog.loggers#1	Specify a class path within 1024 characters. When specifying multiple values, delimit with commas (,). You can specify the following characters in the class path: Alphanumeric characters Dollar sign ($) Underscore (_) Period (.) However, the class path must begin with an alphanumeric character.	None	06-50 07-00
ejbserver.application.userlog.menu.handlers.#1#2	Specify the list of handler names. When specifying multiple values, delimit with commas (,).	None	06-50 07-00

#1

To specify multiple values in param-value, delimit the values with commas (,).

(Example)

<param-value>value1, value2, value3</param-value>

#2

When you delete the handler name from this parameter, also delete the related parameter (ejbserver.application.userlog.CJLogHandler.handler-name-to-be-deleted.XXX).

Note that the key corresponding to this parameter does not exist 2.4(5)(b) Keys beginning with ejbserver.application.

The following table describes the parameters beginning with ejbserver.client. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(c) Keys beginning with ejbserver.client. When you reference the section, read the key as parameter.

Table 4-13 Parameters beginning with ejbserver.client

Value of param-name	Specifiable value	Default value	VR
ejbserver.client.ctm.RequestPriority	Specify the value using an integer from 1 to 8.	4	06-50 07-10

The following table describes the parameters beginning with ejbserver.commonj. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(d) Keys beginning with ejbserver.commonj. When you reference the section, read the key as parameter.

Table 4-14 Parameters beginning with ejbserver.commonj

Value of param-name	Specifiable value	Default value	VR
ejbserver.commonj.WorkManager.non_daemon_work_threads	Specify the value using an integer from 1 to 65535.	10	08-50

The following table describes the parameters beginning with ejbserver.compiler.

Table 4-15 Parameters beginning with ejbserver.compiler

Value of param-name	Value of param-value	Specifiable value	Default value	VR
ejbserver.compiler.jvm.minHeapSize#	Specifies the maximum heap size of the javac command invoked when a J2EE application is started. Specify a value that satisfies the condition ejbserver.compiler.jvm.minHeapSize ejbserver.compiler.jvm.maxHeapSize. This parameter is valid in version 09-00-01 or earlier, and is ignored even if specified in version 09-00-02 or later.	Specify the value using an integer from 1 to 4095.	256	06-50 07-00
ejbserver.compiler.jvm.maxHeapSize#	Specifies a range of 1 to 4095 (unit: megabytes) as the initial heap size of the javac command invoked when a J2EE application is started. Specify a value that satisfies the condition ejbserver.compiler.jvm.minHeapSize ejbserver.compiler.jvm.maxHeapSize. This parameter is valid in version 09-00-01 or earlier, and is ignored even if specified in version 09-00-02 or later.	Specify the value using an integer from 1 to 4095.	32	06-50 07-00

#

When this value is specified in megabytes, the characters m or M are not required.

Also, you cannot specify the value in Kilobytes adding the characters k or K.

The following table describes the parameters beginning with ejbserver.connectionpool. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(f) Keys beginning with ejbserver.connectionpool. When you reference the section, read the key as parameter.

Table 4-16 Parameters beginning with ejbserver.connectionpool

Value of param-name	Specifiable value	Default value	VR
ejbserver.connectionpool.association.enabled	The following strings can be specified: true false	false	07-50
ejbserver.connectionpool.validation.timeout	Specify the value using an integer from 1 to 2147483647.	5	08-00

The following table describes the parameters beginning with ejbserver.connector. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(g) Keys beginning with ejbserver.connector. When you reference the section, read the key as parameter.

Table 4-17 Parameters beginning with ejbserver.connector

Value of param-name	Specifiable value	Default value	VR
ejbserver.connector.logwriter.filenum	Specify the value using an integer from 1 to 16.	4	06-50 07-00
ejbserver.connector.logwriter.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	2097152	06-50 07-00

The following table describes the parameters beginning with ejbserver.container. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(h) Keys beginning with ejbserver.container. When you reference the section, read the key as parameter.

Table 4-18 Parameters beginning with ejbserver.container

Value of param-name	Specifiable value	Default value	VR
ejbserver.container.audit_trail.enabled	The following strings can be specified: true false	false	07-60
ejbserver.container.passivate.scan.interval	Specify an integer from 0 to 2147483 (unit: seconds).	0	06-50
ejbserver.container.remove.scan.interval	Specify an integer from 0 to 153722867280912 (unit: minutes).	5	06-50

The following table describes the parameters beginning with ejbserver.ejb. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(i) Keys beginning with ejbserver.ctm. When you reference the section, read the key as parameter.

Table 4-19 Parameters beginning with ejbserver.ctm

Value of param-name	Specifiable value	Default value	VR
ejbserver.ctm.ActivateTimeOut	Specify an integer from 0 to 2147483647 (unit: seconds).	180	06-50 07-10
ejbserver.ctm.CTMID	The following strings can be specified: String that does not begin with 'ctm' or 'CTM' and is maximum 31 characters using alphanumeric characters, underscore (_), and period (.). IP address	ctm-tier: IP-address-of-used-CTM-with-period-replaced-by-underscore(_)_port-number-of-CTM-used Others: IP-address	07-50
ejbserver.ctm.DeactivateTimeOut	Specify an integer from 0 to 2147483647 (unit: seconds).	180	06-50 07-10
ejbserver.ctm.QueueLength	Specify the value using an integer from 1 to 32767.	None	06-50 07-10
ejbserver.ctm.useGlobalJNDI	The following strings can be specified: true false	false	09-00

The following table describes the parameters beginning with ejbserver.deploy. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(j) Keys beginning with ejbserver.deploy. When you reference the section, read the key as parameter.

Table 4-20 Parameters beginning with ejbserver.deploy

Value of param-name	Specifiable value	Default value	VR
ejbserver.deploy.annotations.load_libjars.enabled	The following strings can be specified: true false	true	09-50
ejbserver.deploy.annotations.load_check.enabled	The following strings can be specified: true false	false	08-00
ejbserver.deploy.context.check_interval	Specify an integer from 0 to 2147483647 (unit: seconds).	0	07-00
ejbserver.deploy.context.reload_scope	The following strings can be specified: app jsp none web	app	07-00
ejbserver.deploy.context.update.interval	Specify an integer from 0 to 2147483647 (unit: seconds).	0	07-00
ejbserver.deploy.resourcefile.scramble.enabled	The following strings can be specified: true false	false	06-50
ejbserver.deploy.session.work.directory	Specify any string.	In Windows &{cosminexus.home}\CC\server\repository\&{server.name} In UNIX &{cosminexus.home}/CC/server/repository/&{server.name}	07-00

The following table describes the parameters beginning with ejbserver.distributedtx. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(k) Keys beginning with ejbserver.distributedtx. When you reference the section, read the key as parameter.

Table 4-21 Parameters beginning with ejbserver.distributedtx

Value of param-name	Specifiable value	Default value	VR
ejbserver.distributedtx.enableXidReuseOptimization	The following strings can be specified: true false	false	06-50
ejbserver.distributedtx.ots.recoverFailMessageCount	Specify the value using an integer from 0 to 2147483647.	0	09-00
ejbserver.distributedtx.ots.status.directory1	Specify any string with a maximum of 200 characters.	otsstatus	06-70
ejbserver.distributedtx.ots.status.directory2	Specify any string with a maximum of 200 characters.	None	06-70
ejbserver.distributedtx.recovery.port	Specify the value using an integer from 1 to 65535.	20302	06-50 07-00
ejbserver.distributedtx.rollbackClientTxOnSystemException	The following strings can be specified: true false	false	06-50
ejbserver.distributedtx.XATransaction.enabled	The following strings can be specified: true false	false	06-50

The following table describes the parameters beginning with ejbserver.DynamicStubLoading. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(l) Keys beginning with ejbserver.DynamicStubLoading. When you reference the section, read the key as parameter.

Table 4-22 Parameters beginning with ejbserver.DynamicStubLoading

Value of param-name	Specifiable value	Default value	VR
ejbserver.DynamicStubLoading.Enabled	The following strings can be specified: true false	false	06-50

The following table describes the parameters beginning with ejbserver.ejb. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(m) Keys beginning with ejbserver.ejb. When you reference the section, read the key as parameter.

Table 4-23 Parameters beginning with ejbserver.ejb

Value of param-name	Specifiable value	Default value	VR
ejbserver.ejb.timerservice.maxCallbackThreads	Specify the value using an integer from 1 to 100.	1	07-00
ejbserver.ejb.timerservice.retryCount	Specify the value using an integer from 0 to 2147483646.	1	07-00
ejbserver.ejb.timerservice.retryInterval	Specify an integer from 1 to 604800 (unit: seconds).	5	07-00

The following table describes the parameters beginning with ejbserver.ext. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(n) Keys beginning with ejbserver.ext. When you reference the section, read the key as parameter.

Table 4-24 Parameters beginning with ejbserver.ext

Value of param-name	Specifiable value	Default value	VR
ejbserver.ext.method_observation.interval	Specify an integer from 0 to 86400 (unit: seconds).	0	06-50

The following table describes the parameters beginning with ejbserver.http. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(o) Keys beginning with ejbserver.http. When you reference the section, read the key as parameter.

Table 4-25 Parameters beginning with ejbserver.http

Value of param-name	Specifiable value	Default value	VR
ejbserver.http.port	Specify the value using an integer from 1 to 65535.	8080	07-50

The following table describes the parameters beginning with ejbserver.instrumentation. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(p) Keys beginning with ejbserver.instrumentation. When you reference the section, read the key as parameter.

Table 4-26 Parameters beginning with ejbserver.instrumentation

Value of param-name	Specifiable value	Default value	VR
ejbserver.instrumentation.enabled	The following strings can be specified: true false	true	06-50 07-00

The following table describes the parameters beginning with ejbserver.jca. For details about the contents to be specified in param-value corresponding to 'Value of param-name' see the 2.4(5)(q) Keys beginning with ejbserver.jca. When you reference the section, read the key as parameter.

Table 4-27 Parameters beginning with ejbserver.jca

Value of param-name	Specifiable value	Default value	VR
ejbserver.jca.adapter.tp1.bind_host	The values that can be specified are as follows: IPv4 address Host name	Valid local address selected automatically according to the system	08-50

The following table describes the parameters beginning with ejbserver.jdbc. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see the description of 2.11.1(1) Keys beginning with ejbserver.jdbc in the uCosminexus Application Server Maintenance and Migration Guide. When you reference the section, read the key as parameter.

Table 4-28 Parameters beginning with ejbserver.jdbc

Value of param-name	Specifiable value	Default value	VR
ejbserver.jdbc.propertyInfo.BUF_SIZE	Specify the value using an integer from 1 to 16000.	None	06-50
ejbserver.jdbc.propertyInfo.ENCODELANG	Specify any string.	None	06-50

The following table describes the parameters beginning with ejbserver.jndi. For details about the contents to be specified in param-value corresponding to 'Value of param-name' see the 2.4(5)(r) Keys beginning with ejbserver.jndi. When you reference the section, read the key as parameter.

Table 4-29 Parameters beginning with ejbserver.jndi

Value of param-name	Specifiable value	Default value	VR
ejbserver.jndi.cache	The following strings can be specified: on off	on	06-50
ejbserver.jndi.cache.interval	Specify an integer from 0 to 2147483647 (unit: seconds).	0	06-50
ejbserver.jndi.cache.interval.clear.option	The following strings can be specified: refresh check	refresh	06-50
ejbserver.jndi.global.enabled	The following strings can be specified: true false	true	09-00
ejbserver.jndi.namingservice.group.specify-group-name.providerurls	Specify a string lined up in the following order: 'corbaname::' '1 to 255 alphanumeric characters or @myhost':'0 to 65535 numeric characters'. Specify a string that is delimited one or more times with a semi-colon (;) and repeated.	None	07-50
ejbserver.jndi.namingservice.group.list	Specify the Logical Naming Service group delimiting with semi-colon (:). The Logical Naming Service group consists within 30 alphanumeric characters or underscore (_).	None	07-50
ejbserver.jndi.request.timeout	Specify an integer from 0 to 86400 (unit: seconds).	0	06-50

The following table describes the parameters beginning with ejbserver.jpa. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(s) Keys beginning with ejbserver.jpa. When you reference the section, read the key as parameter.

Table 4-30 Parameters beginning with ejbserver.jpa

Value of param-name	Specifiable value	Default value	VR
ejbserver.jpa.defaultJtaDsName	Specify any string.	None	08-00
ejbserver.jpa.defaultNonJtaDsName	Specify any string.	None	08-00
ejbserver.jpa.defaultProviderClassName	Specify any string.	com.hitachi.software.jpa.PersistenceProvider	08-00
ejbserver.jpa.disable	The following strings can be specified: true false	false	08-50
ejbserver.jpa.overrideJtaDsName	Specify any string.	None	08-00
ejbserver.jpa.overrideNonJtaDsName	Specify any string.	None	08-00
ejbserver.jpa.overrideProvider	Specify any string.	None	08-00
ejbserver.jpa.emfprop.property-key	Specify any string.	None	08-00

The following table describes the parameters beginning with ejbserver.jta. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(t) Keys beginning with ejbserver.jta. When you reference the section, read the key as parameter.

Table 4-31 Parameters beginning with ejbserver.jta

Value of param-name	Specifiable value	Default value	VR
ejbserver.jta.TransactionManager.defaultTimeOut	Specify an integer from 1 to 2147483647 (unit: seconds).	180	06-50

The following table describes the parameters beginning with ejbserver.logger. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(u) Keys beginning with ejbserver.logger. When you reference the section, read the key as parameter.

Table 4-32 Parameters beginning with ejbserver.logger

Value of param-name	Specifiable value	Default value	VR
ejbserver.logger.channels.define.ConnectionPoolWatchLogFile.filenum	Specify the value using an integer from 1 to 16.	2	07-50
ejbserver.logger.channels.define.ConnectionPoolWatchLogFile.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	1048576	07-50
ejbserver.logger.channels.define.ConsoleLogFile.filenum	Specify the value using an integer from 1 to 16.	2	07-50
ejbserver.logger.channels.define.ConsoleLogFile.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	1048576	07-50
ejbserver.logger.channels.define.DevelopmentLogFile.filenum	Specify an integer from 1 to 16.	4	09-50
ejbserver.logger.channels.define.DevelopmentLogFile.filesize	Specify an integer from 4096 to 2147483647.	1048576	09-50
ejbserver.logger.DevelopmentLogFile.level	The following values can be specified: OFF (Do not output) SEVERE WARNING INFO CONFIG FINE FINER FINEST ALL (Output everything)	OFF	09-50
ejbserver.logger.channels.define.EJBContainerLogFile.filenum	Specify the value using an integer from 1 to 16.	2	07-50
ejbserver.logger.channels.define.EJBContainerLogFile.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	1048576	07-50
ejbserver.logger.channels.define.ExceptionLogFile.filenum	Specify the value using an integer from 1 to 16.	2	07-50
ejbserver.logger.channels.define.ExceptionLogFile.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	1048576	07-50
ejbserver.logger.channels.define.FileDescriptorWatchLogFile.filenum	Specify the value using an integer from 1 to 16.	2	07-50
ejbserver.logger.channels.define.FileDescriptorWatchLogFile.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	1048576	07-50
ejbserver.logger.channels.define.HttpSessionWatchLogFile.filenum	Specify the value using an integer from 1 to 16.	2	07-50
ejbserver.logger.channels.define.HttpSessionWatchLogFile.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	1048576	07-50
ejbserver.logger.channels.define.JPAOperationLogFile.filenum	Specify the value using an integer from 1 to 16.	2	08-00
ejbserver.logger.channels.define.JPAOperationLogFile.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	1048576	08-00
ejbserver.logger.channels.define.JPAMaintenanceLogFile.filenum	Specify the value using an integer from 1 to 16.	2	08-00
ejbserver.logger.channels.define.JPAMaintenanceLogFile.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	1048576	08-00
ejbserver.logger.channels.define.MaintenanceLogFile.filenum	Specify the value using an integer from 1 to 16.	4	07-50
ejbserver.logger.channels.define.MaintenanceLogFile.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	16777216	07-50
ejbserver.logger.channels.define.MemoryWatchLogFile.filenum	Specify the value using an integer from 1 to 16.	2	07-50
ejbserver.logger.channels.define.MemoryWatchLogFile.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	1048576	07-50
ejbserver.logger.channels.define.MessageLogFile.filenum	Specify the value using an integer from 1 to 16.	2	07-50
ejbserver.logger.channels.define.MessageLogFile.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	1048576	07-50
ejbserver.logger.channels.define.RequestQueueWatchLogFile.filenum	Specify the value using an integer from 1 to 16.	2	07-50
ejbserver.logger.channels.define.RequestQueueWatchLogFile.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	1048576	07-50
ejbserver.logger.channels.define.ThreaddumpWatchLogFile.filenum	Specify the value using an integer from 1 to 16.	2	07-50
ejbserver.logger.channels.define.ThreaddumpWatchLogFile.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	1048576	07-50
ejbserver.logger.channels.define.ThreadWatchLogFile.filenum	Specify the value using an integer from 1 to 16.	2	07-50
ejbserver.logger.channels.define.ThreadWatchLogFile.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	1048576	07-50
ejbserver.logger.channels.define.UserErrLogFile.filenum	Specify the value using an integer from 1 to 16.	2	07-50
ejbserver.logger.channels.define.UserErrLogFile.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	1048576	07-50
ejbserver.logger.channels.define.UserOutLogFile.filenum	Specify the value using an integer from 1 to 16.	2	07-50
ejbserver.logger.channels.define.UserOutLogFile.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	1048576	07-50
ejbserver.logger.channels.define.WebAccessLogFile.filenum	Specify the value using an integer from 1 to 16.	16	07-50
ejbserver.logger.channels.define.WebAccessLogFile.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	4194304	07-50
ejbserver.logger.channels.define.WebContainerLogFile.filenum	Specify the value using an integer from 1 to 16.	2	07-50
ejbserver.logger.channels.define.WebContainerLogFile.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	1048576	07-50
ejbserver.logger.channels.define.WebServletLogFile.filenum	Specify the value using an integer from 1 to 16.	4	07-50
ejbserver.logger.channels.define.WebServletLogFile.filesize	Specify an integer from 4096 to 2147483647 (unit: bytes).	4194304	07-50
ejbserver.logger.enabled.*	Specify the following strings delimiting with commas (,): Error Warning Information Debug	Error, Warning	07-50
ejbserver.logger.rotationTime	Specify in the HHMMSS format.	None	09-50
ejbserver.logger.rotationStyle	The following strings can be specified: SHIFT WRAP	WRAP	09-50
ejbserver.logger.systemlog.enabled	The following strings can be specified: true false	true	06-50

The following table describes the parameters beginning with ejbserver.management. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(v) Keys beginning with ejbserver.management. When you reference the section, read the key as parameter.

Table 4-33 Parameters beginning with ejbserver.management

Value of param-name	Specifiable value	Default value	VR
ejbserver.management.JVM.stats_monitor.FullGCCount.enabled	The following strings can be specified: true false	true	07-00
ejbserver.management.JVM.stats_monitor.FullGCCount.interval	Specify the value using an integer from 1 to 2147483647 (unit: seconds).	600	07-00
ejbserver.management.JVM.stats_monitor.FullGCCount.threshold	Specify an integer from 1 to 2147483647 (unit: seconds).	10	07-00
ejbserver.management.statistics.interval	Specify an integer from 1 to 86400 (unit: seconds).	60	07-00
ejbserver.management.stats_file.base_time	Specify an integer from 0 to 1439 (unit: minutes).	0	07-00
ejbserver.management.stats_file.dir	Specify any string.	[In Windows] Cosminexus-working-directory/ejb/server-name/stats [In UNIX] Cosminexus-working-directory/ejb/server-name/stats	07-00
ejbserver.management.stats_file.enabled	The following strings can be specified: true false	true	07-00
ejbserver.management.stats_file.num	Specify the value using an integer from 2 to 168.	7	07-00
ejbserver.management.stats_file.period	Specify an integer from 1 to 744 (unit: hours).	24	07-00
ejbserver.management.webcontainer.stats_monitor.waiting_request_count.enabled	The following strings can be specified: true false	true	09-00
ejbserver.management.webcontainer.stats_monitor.waiting_request_count.high_threshold	Specify an integer from 1 to 100 (unit: %)	80	09-00
ejbserver.management.webcontainer.stats_monitor.waiting_request_count.low_threshold	Specify an integer from 0 to 99 (unit: %)	0	09-00
ejbserver.management.webcontainer.stats_monitor.whole_waiting_request_count.enabled	The following strings can be specified: true false	true	09-00
ejbserver.management.webcontainer.stats_monitor.whole_waiting_request_count.high_threshold	Specify an integer from 1 to 100 (unit: %)	80	09-00
ejbserver.management.webcontainer.stats_monitor.whole_waiting_request_count.low_threshold	Specify an integer from 0 to 99 (unit: %)	0	09-00

The following table describes the parameters beginning with ejbserver.manager. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(w) Keys beginning with ejbserver.manager. When you reference the section, read the key as parameter.

Table 4-34 Parameters beginning with ejbserver.manager

Value of param-name	Specifiable value	Default value	VR
ejbserver.manager.agent.JP1EventAgent.conf	Specify any string.	Cosminexus-installation-directory/manager/config/manager.real-server-name.properties	07-50
ejbserver.manager.agent.JP1EventAgent.enabled	The following strings can be specified: true false	false	07-50
ejbserver.manager.agent.MEventAgent.conf	Specify any string.	Cosminexus-installation-directory/manager/config/mevent.real-server-name.properties	07-50
ejbserver.manager.agent.MEventAgent.enabled	You can specify the following strings: true false	true	06-50 07-00

The following table describes the parameters beginning with ejbserver.naming. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(x) Keys beginning with ejbserver.naming. When you reference the section, read the key as parameter.

Table 4-35 Parameters beginning with ejbserver.naming

Value of param-name	Specifiable value	Default value	VR
ejbserver.naming.host	The following strings can be specified: Host name IPv4 address @myhost	Same host as the J2EE server	07-50
ejbserver.naming.port#1	Specify the value using an integer from 1 to 65535.	900	07-50
ejbserver.naming.startupMode#2	The following strings can be specified: manual inprocess	inprocess	07-50
ejbserver.naming.startupRetryCount#1	Specify the value using an integer from 0 to 2147483647.	9	07-50
ejbserver.naming.startupWaitTime#1	Specify an integer from 0 to 2147483647 (unit: seconds).	1	07-50

#1

If a value other than 'inprocess' is specified in ejbserver.naming.startupMode, the value is ignored.

#2

You cannot specify automatic.

The following table describes the parameters beginning with ejbserver.rmi. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(y) Keys beginning with ejbserver.rmi. When you reference the section, read the key as parameter.

Table 4-36 Parameters beginning with ejbserver.rmi

Value of param-name	Specifiable value	Default value	VR
ejbserver.rmi.localinvocation.scope	The following strings can be specified: none app all	app	06-50
ejbserver.rmi.naming.host	The following strings can be specified: Host name IPv4 address @myhost	None	07-50
ejbserver.rmi.naming.port	Specify the value using an integer from 1 to 65535.	23152	07-00
ejbserver.rmi.passbyreference	The following strings can be specified: true false	false	06-50
ejbserver.rmi.remote.listener.port	Specify the value using an integer from 0 to 65535.	0	07-00
ejbserver.rmi.request.timeout	Specify an integer from 0 to 86400 (unit: seconds).	0	06-50 07-00

The following table describes the parameters beginning with ejbserver.server. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(z) Keys beginning with ejbserver.server. When you reference the section, read the key as parameter.

Table 4-37 Parameters beginning with ejbserver.server

Value of param-name	Specifiable value	Default value	VR
ejbserver.server.j2ee.feature	The following strings can be specified: 1.3basic 1.4	1.4	06-50 07-00
ejbserver.server.prf.PRFID	The following strings can be specified: String that does not begin with 'ctm', 'CTM', 'tsc', and 'TSC' and is maximum 31 characters using alphanumeric characters and underscore (_). CTMDOMAIN	PRF-identifier-of-PRF-used	07-50
ejbserver.server.threaddump.filenum	Specify the value using an integer from 1 to 2147483647.	256	06-50
ejbserver.server.eheap.httpsession.enabled	The following strings can be specified: true false	true	08-00
ejbserver.server.eheap.ajp13.enabled	The following strings can be specified: true false	true	08-00

The following table describes the parameters beginning with ejbserver.Stateful. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(aa) Keys beginning with ejbserver.stateful. When you reference the section, read the key as parameter.

Table 4-38 Parameters beginning with ejbserver.stateful

Value of param-name	Specifiable value	Default value	VR
ejbserver.stateful.passivate.switch	The following strings can be specified: true false	false	06-50

The following table describes the parameters beginning with ejbserver.stdoutlog. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(bb) Keys beginning with ejbserver.stdoutlog. When you reference the section, read the key as parameter.

Table 4-39 Parameters beginning with ejbserver.stdoutlog

Value of param-name	Specifiable value	Default value	VR
ejbserver.stdoutlog.autoflush	The following strings can be specified: true false	false	08-00

The following table describes the parameters beginning with ejbserver.watch. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(cc) Keys beginning with ejbserver.watch. When you reference the section, read the key as parameter.

Table 4-40 Parameters beginning with ejbserver.watch

Value of param-name	Specifiable value	Default value	VR
ejbserver.watch.defaultRequestQueue.enabled	The following strings can be specified: true false	true	06-50
ejbserver.watch.defaultRequestQueue.interval	Specify an integer from 1 to 2147483647 (unit: seconds).	30	06-50
ejbserver.watch.defaultRequestQueue.threshold	Specify an integer from 1 to 100 (unit:%).	80	06-50
ejbserver.watch.defaultRequestQueue.writefile.enabled	The following strings can be specified: true false	true	06-50
ejbserver.watch.enabled	The following strings can be specified: true false	true	06-50
ejbserver.watch.fileDescriptor.enabled	The following strings can be specified: true false	true	06-50
ejbserver.watch.fileDescriptor.interval	Specify an integer from 1 to 2147483647 (unit: seconds).	60	06-50
ejbserver.watch.fileDescriptor.threshold	Specify the value using an integer from 1 to 2147483647.	2147483647	06-50
ejbserver.watch.fileDescriptor.writefile.enabled	The following strings can be specified: true false	true	06-50
ejbserver.watch.memory.enabled	The following strings can be specified: true false	true	06-50
ejbserver.watch.memory.interval	Specify an integer from 1 to 2147483647 (unit: seconds).	60	06-50
ejbserver.watch.memory.threshold	Specify an integer from 1 to 100 (unit: %).	80	06-50
ejbserver.watch.memory.writefile.enabled	The following strings can be specified: true false	true	06-50
ejbserver.watch.thread.enabled	The following strings can be specified: true false	true	06-50
ejbserver.watch.thread.interval	Specify an integer from 1 to 2147483647 (unit: seconds).	60	06-50
ejbserver.watch.thread.threshold	Specify the value using an integer from 1 to 2147483647.	2147483647	06-50
ejbserver.watch.thread.writefile.enabled	The following strings can be specified: true false	true	06-50
ejbserver.watch.threaddump.enabled	The following strings can be specified: true false	true	06-50
ejbserver.watch.threaddump.interval	Specify an integer from 1 to 2147483647 (unit: seconds).	30	06-50
ejbserver.watch.threaddump.threshold	Specify an integer from 1 to 100 (unit: %).	80	06-50
ejbserver.watch.threaddump.writefile.enabled	The following strings can be specified: true false	true	06-50

The following table describes the parameters beginning with ejbserver.webj2ee. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(dd) Keys beginning with ejbserver.webj2ee. When you reference the section, read the key as parameter.

Table 4-41 Parameters beginning with ejbserver.webj2ee

Value of param-name	Specifiable value	Default value	VR
ejbserver.webj2ee.connectionAutoClose.enabled	The following strings can be specified: true false	true	06-50 07-00

The following table describes the specifiable keys and the parameters beginning with https. For details on the contents to be specified in param-value corresponding to the Value of param-name column, see the description in 2.4(5)(ae) Keys beginning with https. When you reference this section, read the key as a parameter.

Value of param-name	Specifiable value	Default value	VR
https.cipherSuites	#	#	09-50
https.protocols	#	#	09-50

#

For details on the keys, see the JDK documentation.

The following table describes the parameters beginning with java. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(ff) Keys beginning with java. When you reference the section, read the key as parameter.

Table 4-42 Parameters beginning with java

Value of param-name	Specifiable value	Default value	VR
java.naming.factory.initial	The following strings can be specified: com.hitachi.software.ejb.jndi.InsContextFactory com.hitachi.software.ejb.jndi.GroupContextFactory	com.hitachi.software.ejb.jndi.InsContextFactory	06-50

The following table describes the parameters beginning with vbj.

Table 4-43 Parameters beginning with vbj

Value of param-name	Value of param-value	Specifiable value	Default value	VR
vbj.java2iiop.jvm.maxHeapSize#	Specifies the maximum heap size of the java2iiop command invoked when a J2EE application starts. Specify the value that satisfies the condition vbj.java2iiop.jvm.minHeapSize vbj.java2iiop.jvm.maxHeapSize.	Specify the value using an integer from 1 to 4095.	128	06-50 07-00
vbj.java2iiop.jvm.minHeapSize#	Specifies a range of 1 to 4095 (unit: megabytes) as the initial heap size of the java2iiop command invoked when a J2EE application starts. Specify the value that satisfies the condition vbj.java2iiop.jvm.minHeapSize vbj.java2iiop.jvm.maxHeapSize.	Specify the value using an integer from 1 to 4095.	16	06-50 07-00

Note:

When this value is specified in megabytes, the characters m or M are not required.

Also, you cannot specify the value in Kilobytes adding the characters k or K.

The following table describes the parameters beginning with vbroker. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(hh) Keys beginning with vbroker. When you reference the section, read the key as parameter.

Table 4-44 Parameters beginning with vbroker

Value of param-name	Specifiable value	Default value	VR
vbroker.agent.port	Specify the value using an integer from 1 to 65535.	14000	07-50
vbroker.se.iiop_tp.host	The following strings can be specified: IPv4 address Host name @myhost	None	07-50
vbroker.se.iiop_tp.scm.iiop_tp.listener.port	Specify the value using an integer from 0 to 65535.	0	06-50 07-00

The following table describes the parameters beginning with webserver.application. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(ii) Keys beginning with webserver.application. When you reference the section, read the key as parameter.

Table 4-45 Parameters beginning with webserver.application

Value of param-name	Specifiable value	Default value	VR
webserver.application.lower_version	The following strings can be specified: 2.4 2.5	None	08-50

The following table describes the parameters beginning with webserver.connector. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(kk) Keys beginning with webserver.container. When you reference the section, read the key as parameter.

Table 4-46 Parameters beginning with webserver.connector

Value of param-name	Specifiable value	Default value	VR
webserver.connector.ajp13.backlog	Specify the value using an integer from 1 to 2147483647.	100	06-50
webserver.connector.ajp13.bind_host	The following strings can be specified: Host name IPv4 address @myhost	None	07-50
webserver.connector.ajp13.max_threads	Specify the value using an integer from 1 to 1024.	10	06-50
webserver.connector.ajp13.port	Specify the value using an integer from 1 to 65535.	8007	06-50 07-00
webserver.connector.ajp13.receive_timeout	Specify an integer from 0 to 3600 (unit: seconds).	600	06-50 07-00
webserver.connector.ajp13.send_timeout	Specify an integer from 0 to 3600 (unit: seconds).	600	07-00
webserver.connector.http.bind_host	Specify one of the following values: Host name IPv4 address @myhost	None	07-50
webserver.connector.http.permitted.hosts#	The values that can be specified are as follows: IPv4 address Host name Asterisk (*)	None	06-50 07-00
webserver.connector.inprocess_http.backlog	Specify the value using an integer from 1 to 2147483647.	511	07-50
webserver.connector.inprocess_http.bind_host	The following strings can be specified: Host name IPv4 address @myhost	None	07-50
webserver.connector.inprocess_http.enabled	The following strings can be specified: true false	false	07-50
webserver.connector.inprocess_http.enabled_methods	The values that can be specified are as follows: GET HEAD POST PUT DELETE OPTIONS TRACE CONNECT PATCH LINK UNLINK Asterisk (*)	GET,HEAD,POST,PUT,DELETE,OPTIONS	07-50
webserver.connector.inprocess_http.error_custom.error-page-customize-definition-name.file	File name	None	07-50
webserver.connector.inprocess_http.error_custom.error-page-customize-definition-name.file.content_type	Specify any string.	text/html	07-50
webserver.connector.inprocess_http.error_custom.error-page-customize-definition-name.redirect_url	Specify any string.	None	07-50
webserver.connector.inprocess_http.error_custom.error-page-customize-definition-name.request_url	Specify any string.	/*	07-50
webserver.connector.inprocess_http.error_custom.error-page-customize-definition-name.status	Specify the value using an integer from 400 to 599.	None	07-50
webserver.connector.inprocess_http.error_custom.list	Specify a string within 32 characters using alphanumeric characters and underscore (_). Also, when specifying multiple values, delimit with commas (,).	None	07-50
webserver.connector.inprocess_http.gateway.host	Specify one of the following values: Host name IPv4 address @myhost	None	07-50
webserver.connector.inprocess_http.gateway.https_scheme	The following strings can be specified: true false	false	07-50
webserver.connector.inprocess_http.gateway.port	Specify the value using an integer from 1 to 65535.	None	07-50
webserver.connector.inprocess_http.init_threads	Specify the value using an integer from 1 to 1024.	10	07-50
webserver.connector.inprocess_http.keep_start_threads	The following strings can be specified: true false	false	07-50
webserver.connector.inprocess_http.limit.max_headers	Specify the value using an integer from 0 to 32767.	100	07-50
webserver.connector.inprocess_http.limit.max_request_body	Specify an integer from -1 to 2147483647 (unit: bytes).	-1	07-50
webserver.connector.inprocess_http.limit.max_request_header	Specify an integer from 7 to 65536 (unit: bytes).	16384	07-50
webserver.connector.inprocess_http.limit.max_request_line	You can specify the following values (unit: bytes): -1 7-8190	8190	07-50
webserver.connector.inprocess_http.max_connections	Specify the value using an integer from 1 to 1024.	100	07-50
webserver.connector.inprocess_http.max_execute_threads	Specify the value using an integer from 1 to 1024.	10	07-50
webserver.connector.inprocess_http.max_spare_threads	Specify the value using an integer from 1 to 1024.	20	07-50
webserver.connector.inprocess_http.min_spare_threads	Specify the value using an integer from 1 to 1024.	5	07-50
webserver.connector.inprocess_http.permitted.hosts	Specify one of the following values: Host name IPv4 address @myhost Asterisk (*)	*	07-50
webserver.connector.inprocess_http.persistent_connection.max_connections	Specify the value using an integer from 0 to 1024.	100	07-50
webserver.connector.inprocess_http.persistent_connection.max_requests	Specify the value using an integer from 0 to 2147483647.	100	07-50
webserver.connector.inprocess_http.persistent_connection.timeout	Specify an integer from 0 to 3600 (unit: seconds).	3	07-50
webserver.connector.inprocess_http.port	Specify the value using an integer from 1 to 65535.	80	07-50
webserver.connector.inprocess_http.receive_timeout	Specify an integer from 0 to 3600 (unit: seconds).	300	07-50
webserver.connector.inprocess_http.redirect.redirect-definition-name.file	Specify the file name.	None	07-50
webserver.connector.inprocess_http.redirect.redirect-definition-name.file.content_type	Specify any string.	text/html	07-50
webserver.connector.inprocess_http.redirect.redirect-definition-name.redirect_url	Specify any string.	None	07-50
webserver.connector.inprocess_http.redirect.redirect-definition-name.request_url	Specify any string.	None	07-50
webserver.connector.inprocess_http.redirect.redirect-definition-name.status	The values that can be specified are as follows: 200 300 301 302 303 305 307	302	07-50
webserver.connector.inprocess_http.redirect.list	Specify a string within 32 characters using alphanumeric characters and underscore (_). Also, when specifying multiple values, delimit with commas (,).	None	07-50
webserver.connector.inprocess_http.rejection_threads	Specify the value using an integer from 0 to 1023.	1	07-50
webserver.connector.inprocess_http.response.header.server	Specify any string.	CosminexusComponentContainer	07-50
webserver.connector.inprocess_http.send_timeout	Specify an integer from 0 to 3600 (unit: seconds).	300	07-50
webserver.connector.limit.max_parameter_count	Specify the value using an integer from -1 to 2147483647.	10000	09-00
webserver.connector.limit.max_post_form_data	Specify the value using an integer from -1 to 2147483647.	2097152	08-50
webserver.connector.redirect_https.port	Specify the value using an integer from 1 to 65535.	None	06-50 07-00

#

To specify multiple values in param-value, delimit the values with commas (,).

(Example)

<param-value>value1, value2, value3</param-value>

The following table describes the parameters beginning with webserver.container. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(kk) Keys beginning with webserver.container. When you reference the section, read the key as parameter.

Table 4-47 Parameters beginning with webserver.container

Value of param-name	Specifiable value	Default value	VR
webserver.container.ac.logEnabled	The following strings can be specified: true false	false	06-50
webserver.container.server_id.enabled	The following strings can be specified: true false	false	06-51
webserver.container.server_id.name	Specify a string of 1 to 64 characters using alphanumeric characters and underscore (_). Note that if you specify the string JSESSIONID, an error will occur.	Null character (The value of cookie-name specified in the load balancer settings is automatically set.)	06-51 07-00 07-50
webserver.container.server_id.value	Specify a string of 1 to 64 characters using alphanumeric characters and the underscore (_).	String generated using the hash function from the host name and J2EE server name/Web container server name (compatibility function)	06-51 07-10 07-50
webserver.container.thread_control.enabled	The following strings can be specified: true false	true	06-50
webserver.container.thread_control.queue_size	Specify the value using an integer from 0 to 2147483647.	8192	06-50
webserver.container.jaxws.webservice.no_webxml.enabled	The following strings can be specified: strict true lax none false	none	08-00
webserver.container.jaxws.webservice.wsee.no_webxml.enabled	The following strings can be specified: strict lax none	lax	08-70
webserver.container.jaxws.webservice.wsee.warname	Specifies the relative path of the WAR file for setup existing in the EAR file.	CosminexusWSEE.war	08-70
webserver.container.servlet.default_mapping.enabled	The following strings can be specified: true false	false	08-00

The following table describes the parameters beginning with webserver.context. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(ll) Keys beginning with webserver.context. When you reference the section, read the key as parameter.

Table 4-48 Parameters beginning with webserver.context

Value of param-name	Specifiable value	Default value	VR
webserver.context.check_interval	Specify an integer from 0 to 2147483647 (unit: seconds).	None	07-00
webserver.context.reload_delay_timeout	Specify an integer from -2147483648 to 2147483647 (unit: seconds).	0	07-00
webserver.context.update.interval	Specify an integer from 0 to 2147483647 (unit: seconds).	None	07-00

The following table describes the parameters beginning with webserver.eadssfo. For details on the contents to be specified in param-value corresponding to the Value of param-name column, see the description in 2.4(5)(an) Keys beginning with webserver.eadssfo. When you reference the section, read the key as a parameter.

Value of param-name	Specifiable value	Default value	VR
webserver.eadssfo.application.cache.name	Specify any string.	EADsSFO_APP_INFO	09-50
webserver.eadssfo.check_size.mode	The following strings can be specified: on off	off	09-50
webserver.eadssfo.client.retry.count	Specify an integer from 1 to 2147483647.	2	09-50
webserver.eadssfo.client.retry.interval	Specify an integer from 1 to 2147483647 (unit: millisecond).	2000	09-50
webserver.eadssfo.eads.client.connection-destination-EADs-server-name.address	Depends on the specifications for the EADs client definition. For details, see the Elastic Application Data store User Guide.	None #2	09-50
webserver.eadssfo.eads.client.connection-destination-EADs-server-name.port	Depends on the specifications for the EADs client definition. For details, see the Elastic Application Data store User Guide.	24600	09-50
webserver.eadssfo.eads.client.node.list	Depends on the specifications for the EADs client definition. For details, see the Elastic Application Data store User Guide.	None #2	09-50
webserver.eadssfo.eads.connection.buffersize	Depends on the specifications for the EADs client definition. For details, see the Elastic Application Data store User Guide.	#1	09-50
webserver.eadssfo.eads.connection.retry	Depends on the specifications for the EADs client definition. For details, see the Elastic Application Data store User Guide.	1	09-50
webserver.eadssfo.eads.connection.timeout	Depends on the specifications for the EADs client definition. For details, see the Elastic Application Data store User Guide.	#1	09-50
webserver.eadssfo.eads.connectionPool.poolsize	Depends on the specifications for the EADs client definition. For details, see the Elastic Application Data store User Guide.	#1	09-50
webserver.eadssfo.eads.logger.commDump.enable	Depends on the specifications for the EADs client definition. For details, see the Elastic Application Data store User Guide.	#1	09-50
webserver.eadssfo.eads.logger.commTrace.enable	Depends on the specifications for the EADs client definition. For details, see the Elastic Application Data store User Guide.	true	09-50
webserver.eadssfo.eads.logger.commTrace.filenum	Depends on the specifications for the EADs client definition. For details, see the Elastic Application Data store User Guide.	#1	09-50
webserver.eadssfo.eads.logger.commTrace.filesize	Depends on the specifications for the EADs client definition. For details, see the Elastic Application Data store User Guide.	#1	09-50
webserver.eadssfo.eads.logger.dir	Depends on the specifications for the EADs client definition. For details, see the Elastic Application Data store User Guide.	${ejbserver.log.directory}	09-50
webserver.eadssfo.eads.logger.message.console.enable	Depends on the specifications for the EADs client definition. For details, see the Elastic Application Data store User Guide.	#1	09-50
webserver.eadssfo.eads.logger.message.filenum	Depends on the specifications for the EADs client definition. For details, see the Elastic Application Data store User Guide.	#1	09-50
webserver.eadssfo.eads.logger.message.filesize	Depends on the specifications for the EADs client definition. For details, see the Elastic Application Data store User Guide.	#1	09-50
webserver.eadssfo.enabled	The following strings can be specified: true false	false	09-50
webserver.eadssfo.exclude.url_patterns	Regularized URI beginning with '/' Extension beginning with '*.'	*.txt;*.htm;*.html;*.jpg;*.gif;*.js	09-50
webserver.eadssfo.session.cache.name	Specify any string.	EADsSFO_SESSIONS	09-50
webserver.eadssfo.session_read_only.url_patterns	Regularized URI beginning with '/' Extension beginning with '*.'	None	09-50

#1 The default EADs client definition value is applied.

#2 If the value is omitted, the KDJE34421-E message is output and the starting of the Web application using the EADs session failover functionality fails.

The following table describes the parameters beginning with webserver.dbsfo. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(mm) Keys beginning with webserver.dbsfo. When you reference the section, read the key as parameter.

Table 4-49 Parameters beginning with webserver.dbsfo

Value of param-name	Specifiable value	Default value	VR
webserver.dbsfo.enabled	The following strings can be specified: true false	false	08-00
webserver.dbsfo.exclude.uris	Specify a normalized URI in character string starting from slash /.	None	08-50
webserver.dbsfo.connector.name	Specify any string.	COSMINEXUS_SFO_DBCONNECTOR	08-00
webserver.dbsfo.attribute_data_size.max	Specify the value using an integer from 128 to 10485760.	1024	08-00
webserver.dbsfo.exclude.extensions	Specify a string within 512 characters using the following characters: Alphanumeric characters Brackets (( )) Exclamation (!) Percent (%) Dollar sign ($) Ampersand (&) Single quote (') Plus '+' Hyphen (-) Equal sign (=) At sign (@) Underscore (_) Tilde (~) Period (.) Comma (,) When specifying multiple extensions, delimit with commas (,).	txt,htm,html,jpg,gif,js	08-00
webserver.dbsfo.check_size.mode	The following strings can be specified: on off	off	08-00
webserver.dbsfo.exception_type_backcompat	The following strings can be specified: true false	false	08-70
webserver.dbsfo.integrity_mode.enabled	The following strings can be specified: true false	false	08-70
webserver.dbsfo.negotiation.high_level	The following strings can be specified: true false	false	08-70
webserver.dbsfo.session_read_only.uris	Specify a normalized URI in character string starting from slash (/).	None	08-70
webserver.dbsfo.thread_control_queue.enabled	The following strings can be specified: true false	false	08-70

The following table describes the parameters beginning with webserver.http. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)( ap) Keys beginning with webserver.http. When you reference the section, read the key as a parameter.

Table 4-50 Parameters beginning with webserver.http

Value of param-name	Specifiable value	Default value	VR
webserver.http.request.encoding	Specify any string with a maximum of 1024 characters.	None	07-10
webserver.http.request.uri_decode.enabled	The following strings can be specified: true false	false	08-50
webserver.http.response.encoding	Specify any string with a maximum of 1024 characters.	None	07-10

The following table describes the parameters beginning with webserver.jsp. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(aq) Keys beginning with webserver.jsp. When you reference the section, read the key as parameter.

Table 4-51 Parameters beginning with webserver.jsp

Value of param-name	Specifiable value	Default value	VR
webserver.jsp.additional.import.list	Specify any string.	None	08-70
webserver.jsp.check_interval	Specify an integer from 0 to 2147483647 (unit: seconds).	None	07-00
webserver.jsp.compile.backcompat	You can specify the following values and strings: 5 1.5 1.4 1.3 1.2 true false	false	06-50 07-00
webserver.jsp.debugging.enabled	The following strings can be specified: true false	false	08-00
webserver.jsp.el2_2.enabled	The following strings can be specified: true false	true	09-00
webserver.jsp.jsp_page.bom.enabled	The following strings can be specified: true false	true	08-00
webserver.jsp.keepgenerated	The following strings can be specified: true false	false	06-50
webserver.jsp.pageEncoding	Specify any string with a maximum of 1024 characters.	None	07-10
webserver.jsp.tld.mapping.java_ee_tag_library.enabled	The following strings can be specified: true false	true	08-00
webserver.jsp.translation.customAction.ignoreCaseAttributeName	The following strings can be specified: true false	false	08-00
webserver.jsp.translation.backcompat.customAction.declareVariable	The following strings can be specified: true false	false	07-60
webserver.jsp.translation.backcompat.tag.noCheckRtexprvalue	The following strings can be specified: true false	false	07-60
webserver.jsp.translation.backcompat.tag.rtexprvalueTerminate	The following strings can be specified: true false	false	07-60
webserver.jsp.translation.backcompat.taglib.noCheckPrefix	The following strings can be specified: true false	false	07-60
webserver.jsp.translation.backcompat.useBean.noCheckClass	The following strings can be specified: true false	false	07-60
webserver.jsp.translation.useBean.noCheckDuplicateId	The following strings can be specified: true false	false	08-00
webserver.jsp.update.interval	Specify the value using an integer from 0 to 2147483647.	None	07-00

The following table describes the parameters beginning with webserver.logger. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(qq) Keys beginning with webserver.logger. When you reference the section, read the key as parameter.

Table 4-52 Parameters beginning with webserver.logger

Value of param-name	Specifiable value	Default value	VR
webserver.logger.access_log.format-name	Specify any string with a maximum of 1024 characters.	%h %l %u %t "%r"%&gts %b	07-50
webserver.logger.access_log.format_list	Specify a string within 32 characters using alphanumeric characters and underscore (_). Also, when specifying multiple values, delimit with commas (,).	None	07-50
webserver.logger.access_log.inprocess_http.enabled	The following strings can be specified: true false	true	07-50
webserver.logger.access_log.inprocess_http.filename	Specify any string with a maximum of 210 characters.	(In Windows) Cosminexus-working-directory\ejb\server-name\logs\http\cjhttp_access.inprocess_http (In UNIX) Cosminexus-working-directory/ejb/server-name/logs/http/cjhttp_access.inprocess_http	07-50
webserver.logger.access_log.inprocess_http.filenum	Specify the value using an integer from 1 to 256.	16	07-50
webserver.logger.access_log.inprocess_http.filesize	Specify an integer from 4096 to 2147483647.	4194304	07-50
webserver.logger.access_log.inprocess_http.usage_format	Specify a string within 32 characters using alphanumeric characters and underscore (_).	common	07-50

The following table describes the parameters beginning with webserver.servlet. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(as) Keys beginning with webserver.servlet. When you reference the section, read the key as parameter.

Table 4-53 Parameters beginning with webserver.servlet

Value of param-name	Specifiable value	Default value	VR
webserver.servlet_api.exception.getCause.backcompat	The following strings can be specified: true false	false	08-00
webserver.ServletContainerInitializer_jar.include.path	There are no restrictions on the permitted characters. When specifying multiple values, delimit with commas (,). Use a slash (/) as the directory path delimiter.	None	09-00

The following table describes the parameters beginning with webserver.session. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(au) Keys beginning with webserver.session. When you reference the section, read the key as parameter.

Table 4-54 Parameters beginning with webserver.session

Value of param-name	Specifiable value	Default value	VR
webserver.session.cookie_config.http_only	The following strings can be specified: true false	false	09-50
webserver.session.cookie_config.name	Specify any string.	JSESSIONID	09-50
webserver.session.server_id.value	Specify a string within 64 characters using alphanumeric characters and underscore (_).	String generated using the hash function from the host name and J2EE server name/Web container server name (compatibility functionality) #	06-50 07-10 07-50
webserver.session.max.throwHttpSessionLimitExceededException	The following strings can be specified: true false	false	08-00
webserver.session.tracking_mode	The following strings can be specified: COOKIE URL	Specify both COOKIE and URL	09-50

#

Management Server automatically sets an 8-digit hexadecimal except for the free-tier.

The following table describes the parameters beginning with webserver.static. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(av) Keys beginning with webserver.static. When you reference the section, read the key as parameter.

Table 4-55 Parameters beginning with webserver.static

Value of param-name	Specifiable value	Default value	VR
webserver.static_content.cache.enabled	The following strings can be specified: true false forceoff	false	06-70
webserver.static_content.cache.filesize.threshold	Specify the value using an integer from 0 to 2147483647.	524288	06-70
webserver.static_content.cache.size	Specify the value using an integer from 0 to 2147483647.	10485760	06-70 07-00
webserver.static_content.encoding.extension	Specify any string.	None	07-60

The following table describes the parameters beginning with webserver.work. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(aw) Keys beginning with webserver.work. When you reference the section, read the key as parameter.

Table 4-56 Parameters beginning with webserver.work

Value of param-name	Specifiable value	Default value	VR
webserver.work.clean	The following strings can be specified: true false	false	06-50
webserver.work.directory	Specify any string.	(In Windows) &{cosminexus.home}\CC\server\repository\&{server.name}\web (In UNIX) &{cosminexus.home}/CC/server/repository/&{server.name}/web	06-50

The following table describes the parameters beginning with webserver.xml. For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 2.4(5)(ax) Keys beginning with webserver.xml. When you reference the section, read the key as parameter.

Table 4-57 Parameters beginning with webserver.xml

Value of param-name	Specifiable value	Default value	VR
webserver.xml.validate	The following strings can be specified: true false	true	06-50