Hitachi Command Suite Software メッセージガイド

[目次][前へ][次へ]


3.6 KAIB50000~KAIB59999

Hitachi Command Suite製品のインストーラーに関するメッセージ(KAIB50000~KAIB59999)を次の表に示します。

表3-6 KAIB50000~KAIB59999:Hitachi Command Suite製品のインストーラーのメッセージ

メッセージID メッセージテキスト 説明
KAIB50006-E The installation path contains an invalid character.
Valid characters are:
A-Z a-z 0-9 _ /
Note that these directories cannot be specified:
- /usr
- /usr/local
- /var
- The root directory (/)
要因
インストール先として指定したパスに使用できない文字が含まれています。
対処
インストール先として指定するパスは,次の文字で指定してください。
AZ az 09 _ /
KAIB50008-E An invalid character is included in the database file path. Valid characters are:
A-Z a-z 0-9 . _ /
要因
データベースの格納先として指定したパスに使用できない文字が含まれています。
対処
データベースファイルの格納先として指定するパスは,次の文字で指定してください。
AZ az 09 . _ /
KAIB50018-E The property(<指定したプロパティ>) is invalid. 要因
指定したプロパティ値は無効です。
対処
シンタックスと有効なプロパティを確認してください。
KAIB50019-E Syntax error.
Usage: install.sh [-s [property=value] ...]
-s silent mode
Possible properties (see manual for more details):
HINST_INSTDIR Installation directory [/opt/HiCommand]
HINST_DBDIR Database directory [/var/opt/HiCommand/database]
HINST_IPADDRESS Host name or IP address [`hostname`]
HINST_DBBACKUP (TRUE|FALSE) [TRUE]
HINST_DBBACKUPDIR Database backup directory [/var/opt/HiCommand/backup]
HINST_COMMONHEAP (SMALL|MEDIUM|LARGE) [LARGE]
HINST_HDVMHEAP (SMALL|MEDIUM|LARGE) [LARGE]
HINST_RUNSERVICE (TRUE|FALSE) [TRUE]
HINST_IGNORE_CAPACITY_CHECK (TRUE|FALSE) [FALSE]
HINST_IGNORE_NETWORKING_CHECK (TRUE|FALSE) [FALSE]
HINST_IGNORE_VIRTUAL_MEMORY_CHECK (TRUE|FALSE) [FALSE]
Example: install.sh -s HINST_INSTDIR=/opt/HiCommand
要因
シンタックスが誤っています。
対処
シンタックスと有効なプロパティを確認してください。
KAIB50020-E The specified property value(<指定したプロパティ値>) is not in a valid format for the property(<プロパティ名>). 要因
指定したプロパティ値は無効です。
対処
シンタックスと有効なプロパティを確認してください。
KAIB50021-E The specified property value(<指定したプロパティ値>) is too long for the property(<プロパティ名>). 要因
指定したプロパティ値が,長過ぎます。
対処
マニュアルを参照し,指定できるプロパティの長さを確認してください。
KAIB50023-E An invalid character is included in the backup file path. Valid characters are:
A-Z a-z 0-9 _ /
要因
バックアップファイルの格納先として指定したパスに使用できない文字が含まれています。
対処
バックアップファイルの格納先として指定するパスは,次の文字で指定してください。
A-Z a-z 0-9 _ /
KAIB50024-E The following kernel parameters are smaller than the minimum value.
設定情報
対処方法
要因
カーネルパラメーターが,下限値より小さいです。
対処
マニュアルを参照し,カーネルパラメーターを設定し直してください。
KAIB50025-E The following shell limits are smaller than the minimum value.
設定情報
対処方法
要因
シェル制限が,下限値より小さいです。
対処
マニュアルを参照し,シェル制限を設定し直してください。
KAIB50026-E The mount path contains an invalid character. Valid characters are:
A-Z a-z 0-9 _ /
要因
マウントパスに使用できない文字が含まれています。
対処
マウントパスは,次の文字で指定してください。
AZ az 09 _ /
KAIB51001-E The installer must be run by a root user. The installation will stop. 要因
root以外のユーザーはインストールできません。
対処
rootでログインし直してから,インストールしてください。
KAIB51002-E Only root user can perform a removal. The removal will stop. 要因
root以外のユーザーはアンインストールできません。
対処
rootでログインし直してから,アンインストールしてください。
KAIB51003-E Hitachi Command Suite cannot be installed in this OS version. Verify the supported OS versions for the Hitachi Command Suite. 要因
インストールを実行したOSのバージョンは未サポートであり,インストールできません。
対処
Hitachi Command SuiteがサポートするOSのバージョンを確認してください。
KAIB51004-E This installer is version <OSまたはアーキテクチャ>. Verify the installation media or installer. 要因
実行されたインストーラは,インストール先のOSまたはアーキテクチャに対応していません。
対処
インストールメディアまたは実行するインストーラと,サーバマシンとの対応を確認してください。
KAIB51005-E Hitachi Command Suite cannot be installed in zones that are not global. 要因
非グローバル環境ではインストールできません。
対処
グローバル環境でインストールしてください。
KAIB51006-E You must install the JDK. 要因
Hitachi Command Suiteが前提とするJDKがインストールされていません。
対処
JDKをインストールしてください。
KAIB51007-E The installation media file cannot run. Verify the mount options with the mount command. If the "noexec" option is used, re-mount the installation media without the "noexec" option.
If you cannot resolve the problem, to determine the cause and resolve the problem, detailed investigation is required.
Contact Support Center, who may ask you to collect troubleshooting information.
要因
インストールメディアをマウントしたときに,mountコマンドのnoexecオプションが指定されたおそれがあります。
対処
mountコマンドを実行して,インストールメディアのマウントオプションを確認してください。noexecオプションが指定されている場合は,noexecオプションを指定しないで再度マウントしてください。
それでも実行できない場合は,顧客問い合わせ窓口に連絡してください。
KAIB51008-E Unable to run a file on the installation media. The installation media may be damaged.
To determine the cause and resolve the problem, detailed investigation is required.
Contact Support Center, who may ask you to collect troubleshooting information.
要因
インストールメディアが壊れているおそれがあります。
対処
原因究明と問題の解決には,詳細な調査が必要です。
障害情報を収集し,障害対応窓口に連絡してください。
KAIB51009-E File "<ファイル名>", required for installation, cannot be read.
Causes include:
- The files on the installation media are insufficient, or you do not have execution permission.
- The name of the mount point includes a character other than one-byte alphanumeric characters or "_".
If you cannot resolve this problem, to determine the cause and resolve the problem, detailed investigation is required.
Contact Support Center, who may ask you to collect troubleshooting information.
要因
インストールに必要なファイルを読み込めません。
次の要因が考えられます。
  • メディア上のファイルが不足している,または実行権限がない。
  • マウントポイントに半角英数字および"_"以外の文字が使用されている。
対処
要因に応じて,問題を解決してください。
それでも解決しない場合,原因の究明と問題の解決には,詳細な調査が必要です。障害情報を収集し,障害対応窓口に連絡してください。
KAIB51010-E Some required libraries are not installed. Install any missing libraries.
ライブラリ情報
Note: 32-bit libraries are required.
要因
前提ライブラリがインストールされていません。
対処
不足しているライブラリパッケージをインストールしてください。
KAIB51011-E /usr/bin/perl does not exist. You must install the Perl 5 package. 要因
/usr/bin/perlがありません。
対処
Perl5のパッケージをインストールしてください。
KAIB51013-E The removal has been canceled because you cannot use this directory. Specify another directory and try again. 要因
カレントディレクトリが削除対象のため,アンインストールを中止します。
対処
別のディレクトリに移動して再実行してください。
KAIB51014-E Device Manager is installed in directory <インストール先>. If Device Manager is installed in these directories, it cannot be upgraded:
- /usr
- /usr/local
- /var
Remove Device Manager and install Hitachi Command Suite in another location.
要因
Device Managerが次の場所にインストールされている場合,アップグレードインストールできません。
  • /usr
  • /usr/local
  • /var
対処
Device Managerをアンインストールしてから,Hitachi Command Suiteを別の場所にインストールしてください。
KAIB53007-E The Hitachi Command Suite services cannot be stopped. Please wait for a while, and then try again.
If this error happens again, to determine the cause and resolve the problem, detailed investigation is required.
Contact Support Center, who may ask you to collect troubleshooting information.
要因
Hitachi Command Suite製品のサービスの停止に失敗しました。
システムが稼働中のため,サービスの停止が遅延しているおそれがあります。
対処
しばらく待ってから再度実行してください。同じエラーが発生する場合,原因究明と問題の解決には,詳細な調査が必要です。障害情報を収集し,障害対応窓口に連絡してください。

[目次] [前へ] [次へ]


All Rights Reserved. Copyright© 2010, 2014, Hitachi, Ltd.