22.6 KDEA06000 to KDEA07999
This section describes messages KDEA06000 to KDEA07999 and explains what actions to take in response to each message.
-
KDEA06001-E
The specified cache already exists. (cache name = aa....aa)
aa....aa: Cache name
- Description
-
The specified cache name already exists.
- Action
-
Delete the cache that already exists, or change the cache name.
Ignore the message if no corrective action is required.
-
KDEA06002-E
The specified cache was not found. (cache name = aa....aa)
aa....aa: Cache name
- Description
-
The specified cache was not found.
- Action
-
Create a new cache, or else check the processing and revise it if necessary.
-
KDEA06004-E
An unexpected exception occurred. (detail = aa....aa)
aa....aa: Maintenance information
- Description
-
An unexpected exception occurred.
- Action
-
Contact the customer support center.
-
KDEA07001-E
An attempt to open a file failed. (file name = aa....aa, detail = bb....bb)
aa....aa: Store data file name (absolute path) that an attempt was made to open
bb....bb: Details
- Description
-
An attempt to open the store data file failed.
The possible causes are as follows:
-
The store data file to be read does not exist.
-
A path to non-store data files was specified.
-
There are no access permissions to the store data file.
-
- Action
-
Examine the details, and then check whether there is a problem with the OS environment.
-
KDEA07002-E
An I/O error occurred. (file name = aa....aa, detail = bb....bb)
aa....aa: Store data file name (absolute path)
bb....bb: Details
- Description
-
An I/O error occurred.
- Action
-
Examine the details, and then check whether there is a problem with the OS environment.
-
KDEA07003-E
The data format is invalid. (file name = aa....aa, detail = bb....bb)
aa....aa: Store data file name (absolute path)
bb....bb: Maintenance information
- Description
-
The data format is invalid.
The possible causes are as follows:
-
It is not a store data file.
-
The store data file is damaged.
-
- Action
-
Make sure the correct store data file was specified.
Alternatively, use another store data file.
-
KDEA07004-E
A checksum error occurred. (file name = aa....aa)
aa....aa: Store data file name (absolute path)
- Description
-
A checksum error occurred.
The store data file might be damaged.
- Action
-
Make sure the correct store data file was specified.
Alternatively, use another store data file.
-
KDEA07005-E
The input data version is too new. (file name = aa....aa, input version = bb....bb)
aa....aa: Store data file name (absolute path)
bb....bb: Store data file format version
- Description
-
An attempt was made to read the retrieved store data file in a new format version.
- Action
-
Make sure the correct store data file was specified.
Alternatively, use another store data file.
-
KDEA07006-E
An unexpected exception occurred. (details = aa....aa)
aa....aa: Maintenance information
- Description
-
An unexpected exception occurred.
- Action
-
Contact the customer support center.
-
KDEA07101-E
The specified cache type cannot be used. (cache name = aa....aa, cache type = bb....bb)
aa....aa: Cache name
bb....bb: Cache type
- Description
-
The specified cache type cannot be used.
The possible causes are as follows:
-
The value of the eads.cache.type parameter in the cache properties is invalid.
-
The value of the eads.java.external.heapsize parameter in the shared properties is too small.
-
- Action
-
Check and, if necessary, revise the value of the eads.cache.type parameter in the cache properties.
If the value of the eads.cache.type parameter in the cache properties is correct, increase the value of the eads.java.external.heapsize parameter in the shared properties.
-
KDEA07104-E
The specified cache or cache file was not found. (cache name = aa....aa)
aa....aa: Cache name
- Description
-
A specified cache or cache file was not found.
- Action
-
Create the cache.
Alternatively, check if the correct cache file is specified and, if necessary, revise the specification.
-
KDEA07106-E
An attempt to open a file failed. (file name = aa....aa, details = bb....bb)
aa....aa: Name (absolute path) of the cache file that was to be opened
bb....bb: Details
- Description
-
An attempt to open a cache file failed.
The possible causes are as follows:
-
The cache file to be imported does not exist.
-
The specified path is not for a cache file.
-
There is no access permission for the cache file.
-
- Action
-
Examine the details, and then check whether there is a problem with the OS environment.
-
KDEA07107-E
An I/O error occurred. (file name = aa....aa, details = bb....bb)
aa....aa: Cache file name (absolute path) (if the cache file name cannot be identified, null)
bb....bb: Details
- Description
-
An I/O error occurred.
- Action
-
Examine the details, and then check whether there is a problem with the OS environment.
-
KDEA07108-E
The data format is invalid. (file name = aa....aa, details = bb....bb)
aa....aa: Cache file name (absolute path)
bb....bb: Maintenance information
- Description
-
The data format is invalid.
The possible causes are as follows:
-
The specified file is not a cache file.
-
The cache file is damaged.
-
- Action
-
Check if the correct cache file is specified and, if necessary, revise the specification.
Alternatively, use another cache file.
-
KDEA07109-E
A checksum error occurred. (file name = aa....aa)
aa....aa: Cache file name (absolute path)
- Description
-
A checksum error occurred.
The cache file might be damaged.
- Action
-
Check if the correct cache file is specified and, if necessary, revise the specification.
Alternatively, use another cache file.
-
KDEA07110-E
The input data version is too new. (file name = aa....aa, input version = bb....bb)
aa....aa: Cache file name (absolute path)
bb....bb: Cache file format version
- Description
-
An attempt was made to import a cache file that was obtained using a later version.
- Action
-
Check if the correct cache file is specified and, if necessary, revise the specification.
Alternatively, use another cache file.
-
KDEA07111-E
A data discrepancy between the cache property file and the cache file was detected. (cache property file name = aa....aa, parameter = bb....bb, cache property value = cc....cc, cache file value = dd....dd)
aa....aa: Cache property file name
bb....bb: Parameter name
cc....cc: Value in the cache property file
dd....dd: Value in the cache file
- Description
-
There is a discrepancy in values between the cache property file and the cache file.
Once a cache file has been created, none of the following parameters can be changed in the cache properties:
Also, once a cache file has been created, the value of the following parameter in the cache properties cannot be reduced:
- Action
-
Check if the correct cache file is specified and, if necessary, revise the specification.
Alternatively, use another cache file.
If the value in the cache property file is invalid, check the following parameter values in the cache properties, correct values as necessary, and then restart the EADS server:
-
KDEA07112-E
A data discrepancy between the cluster property file and the cache file was detected. (cache name = aa....aa, type = bb....bb, cluster property value = cc....cc, cache file value = dd....dd)
aa....aa: Cache name
bb....bb: Type
cc....cc: Value in the cluster property file (if the parameter is not specified, null)
dd....dd: Value in the cache file
- Description
-
There is a discrepancy in values between the cluster property file and the cache file.
Once a cache file has been created, the parameters cannot be changed in the cluster properties.
The following table provides the cause by type:
Type
Cause
server number
The number of EADS servers does not match.
no server ID
The EADS server with the specified ID does not exist.
position
The position of the EADS server does not match.
- Action
-
Check if the correct cache file is specified and, if necessary, revise the specification.
Alternatively, use another cache file.
If the value in the cluster property file is invalid, check the following parameter values in the cluster properties, correct values as necessary, and then restart the EADS server:
-
KDEA07113-E
A data discrepancy between the cache and the cache file was detected. (cache name = aa....aa, error details = bb....bb)
aa....aa: Cache name
bb....bb: Error details
- Description
-
The EADS server could not be restored because there was a discrepancy in values between the cache and the cache file.
- Action
-
Check if the correct cache file is specified and, if necessary, revise the specification.
Alternatively, use another cache file.
-
KDEA07115-E
A cache file cannot be written to. (cache name = aa....aa, details = bb....bb)
aa....aa: Cache name
bb....bb: Details
- Description
-
An attempt to import data to a cache file failed because a problem occurred during the import processing.
- Action
-
Determine the cause of the error from the details or from the message output immediately before this message, and then eliminate the problem.
-
KDEA07116-E
A cache file cannot be read. (cache name = aa....aa, details = bb....bb)
aa....aa: Cache name
bb....bb: Details
- Description
-
An attempt to import a cache file failed.
The possible causes are as follows:
-
A problem occurred while the cache property file was being imported.
-
A problem occurred while the cache file was being imported
-
There are too many or too few cache files.
-
- Action
-
Determine the cause of the error from the details or from the message that was output immediately before this message, and then eliminate the problem.
If the number of cache files was too large or too small when the ezstart -r or ezserver -r command was executed, you might be able to restore the cache file by executing the deleteecf -l command and then re-executing the ezstart -r or ezserver -r command.
-
KDEA07117-E
A data discrepancy between the shared property file and the cache file was detected. (cache name = aa....aa, parameter = bb....bb, shared property value = cc....cc, cache file value = dd....dd)
aa....aa: Cache name
bb....bb: Parameter name
cc....cc: Value in the shared property file
dd....dd: Value in the cache file
- Description
-
There is a discrepancy between a value in the shared property file and the value in the cache file.
Once a cache file has been created, the following parameters cannot be changed in the shared properties:
- Action
-
Check if the correct cache file is specified and, if necessary, revise the specification.
Alternatively, use another cache file.
If the value in the shared property file is invalid, check the following parameter values in the shared properties, correct the value, and then restart the EADS server:
-
KDEA07120-E
An I/O error occurred. (directory = aa....aa, details = bb....bb)
aa....aa: Directory name (absolute path)
bb....bb: Details
- Description
-
An I/O error occurred.
- Action
-
Examine the details, and then check whether there is a problem with the OS environment.
Check especially for the following problems:
-
Required directories have not been created.
-
Directories cannot be created.
-
-
KDEA07121-E
A data discrepancy between the cache property file and the cache was detected. (cache property file name = aa....aa, parameter = bb....bb, cache property value = cc....cc, cache value = dd....dd)
aa....aa: Cache property file name
bb....bb: Parameter name
cc....cc: Value in the cache property file
dd....dd: Cache value
- Description
-
There is a discrepancy between a value in the cache property file and a cache value.
Once a cache file has been created, none of the following parameters can be changed in the cache properties:
- Action
-
Check the following parameter values in the cache properties, correct the values, and then restart the EADS server:
-
KDEA07122-E
The area for writing the cache data files is insufficient. (cache name = aa....aa)
aa....aa: Cache name
- Description
-
A space shortage occurred in the area for importing cache data files.
- Action
-
Increase the value of the eads.cache.disk.filenum parameter in the cache properties according to the procedure described in 11.4.1 How to change the properties.
-
KDEA07123-E
An I/O error occurred. (cache name = aa....aa, details = bb....bb)
aa....aa: Cache name
bb....bb: Details
- Description
-
An I/O error occurred.
- Action
-
Determine the cause of the error from the exception logs and then eliminate the problem.
-
KDEA07124-E
An unexpected exception occurred. (cache name = aa....aa, details = bb....bb)
aa....aa: Cache name
bb....bb: Maintenance information
- Description
-
An unexpected exception occurred.
- Action
-
Contact the customer support center.
-
KDEA07125-I
A parameter different from the cache file value will be used. (cache property file name = aa....aa, parameter = bb....bb, cache property value = cc....cc, cache file value = dd....dd)
aa....aa: Cache property file name
bb....bb: Parameter name
cc....cc: Value in the cache property file
dd....dd: Value in the cache file
- Description
-
A parameter value that differs from the value in the cache file was used.
-
KDEA07126-W
The loading of the cache property file failed. (cache property file name = aa....aa)
aa....aa: Cache property file name
- Description
-
An attempt to load a cache property file failed because an error occurred while the cache property file was being loaded.
- Action
-
Check the messages that were output immediately before this message.
-
KDEA07127-E
The loading of the cache property file failed. (cache property file name = aa....aa)
aa....aa: Cache property file name
- Description
-
An attempt to load a cache property file failed because an error occurred while the cache property file was being loaded.
- Action
-
Check the messages that were output immediately before this message.
-
KDEA07128-E
The compaction of cache data files failed. (cache name = aa....aa, range ID = bb....bb, error details = cc....cc)
aa....aa: Cache name
bb....bb: Range ID
cc....cc: Error details
- Description
-
An attempt to perform compaction on the cache data files failed.
- Action
-
Cache files might have been damaged.
Delete the cache files with the eztool deleteecf command, and then execute one of the following commands to restore the EADS server again:
-
ezstart -r command
-
ezserver -r command
-
-
KDEA07201-E
Some data of cache might be inconsistent. (details = aa....aa)
aa....aa: Details
- Description
-
Some data in cache might be inconsistent.
Because an attempt to resume the cache failed, EADS server restoration processing might have failed.
- Action
-
Check the cache.
If necessary, delete the cache with the eztool deletecache command, and then restore the EADS server.
-
KDEA07202-E
The operation and cache type combination is invalid. (operation = aa....aa, cache name = bb....bb, cache type = cc....cc)
aa....aa: Operation
bb....bb: Cache name
cc....cc: Cache type
- Description
-
The combination of the operation and the cache type is invalid.
An attempt to add an EADS server might have failed because there are caches other than memory caches.
- Action
-
Check the cache.
If necessary, delete the cache with the eztool deletecache command, and then add the EADS server.