22.4 KDEA03000 to KDEA03999
This section describes messages KDEA03000 to KDEA03999 and explains what actions to take in response to each message.
-
KDEA03001-I
Initialization of the client library will now start. (version = aa....aa)
aa....aa: EADS client version
- Description
-
Initialization of the client library is starting.
-
KDEA03002-I
The client library process will now end.
- Description
-
The client library is stopping.
-
KDEA03003-I
Cache preparations finished. (cache name = aa....aa)
aa....aa: Cache name
- Description
-
The cache is ready to use.
-
KDEA03004-I
Use of the cache will now end. (cache name = aa....aa)
aa....aa: Cache name
- Description
-
Use of the cache is finished.
-
KDEA03006-E
Initialization of the client library failed. (error code = aa....aa)
aa....aa: Error code
- Description
-
An attempt to initialize the client library failed.
- Action
-
See 18.1.5 CacheException class under (5)(c) Return value, and then eliminate the problem.
-
KDEA03019-I
Initialization of the client library completed.
- Description
-
Initialization of the client library is complete.
-
KDEA03021-E
The connections to all servers making up the cluster failed.
- Description
-
Connection establishment with all EADS servers constituting the cluster failed.
- Action
-
The possible causes are as follows:
-
The cluster was terminated.
-
A problem occurred on the EADS server with which communication was underway.
-
A problem occurred on the host with which communication was underway.
-
A network problem occurred.
-
The timeout settings are not appropriate.
Determine the cause of the error, and then eliminate it.
-
-
KDEA03022-I
The connection to the cluster was restored.
- Description
-
The connection with the cluster has been restored.
-
KDEA03023-E
Initialization of the logger failed. (details = aa....aa)
aa....aa: Error details
- Description
-
An attempt to initialize the logger failed.
- Action
-
Check the error detail information and eliminate the problem.
-
KDEA03911-I
start RootAP(address = aa....aa, pid = bb....bb, no = cc....cc)
aa....aa: IP address
bb....bb: PID (number assigned to each application program by the EADS client)
cc....cc: Sequence number (hexadecimal)
- Description
-
Communication with the EADS server is starting.
-
KDEA03912-I
end RootAP(address = aa....aa, pid = bb....bb, no = cc....cc)
aa....aa: IP address
bb....bb: PID (number assigned to each application program by the EADS client)
cc....cc: Sequence number (hexadecimal)
- Description
-
Communication with the EADS server is stopping.