Job Management Partner 1/Client Security Control Description, User's Guide and Operator's Guide

16.15 Network connection control list file

This file specifies the clients whose network connections are to be controlled from JP1/CSC - Manager Remote Option. In this file, specify one or more of the following to identify each client: MAC address, IP address, or host name. The client specification is handled according to the following rules:

When a MAC address is specified, the client is identified by MAC address only.

When only an IP address is specified, the client is identified by IP address.

When only a host name is specified, the client is identified by host name.

When both an IP address and host name are specified, the client is identified by both IP address and host name.

Create the file with any file name in any directory.

Organization of this section

(1) Synopsis

(2) Definition contents

(3) Specification example

(1) Synopsis

 
MAC-address,IP-address,host-name 
MAC-address,IP-address,host-name 
    :
    :

Legend: [Figure] : Line feed code

(2) Definition contents

The following table shows the contents to define in this file.

Table 16-47 Definition contents of a network connection control list file

No. Item Setting value

1 MAC address Write the MAC addresses of the clients whose network connections are to be controlled, one address per line.
Specify each MAC address as 12 hexadecimal digits.
MAC addresses are not case sensitive.
You can use a delimiter after every second digit. Only one type of delimiter can be used in one MAC address.
Hyphens (-) or colons (:) can be used as the delimiter, or you can write the addresses without any delimiter. Note that spaces cannot be used as a delimiter.

2 IP address Specify the IP address corresponding to the MAC address in IPv4 format (xxx.xxx.xxx.xxx).

3 Host name Specify the host name of the client using a string with 64 or fewer bytes.

Note the following coding conventions:

You can write multiple lines in the file.

End every line with a line feed code. The line feed code is 0x0d0a. Lines containing only a line feed code are ignored.

No.	Item	Setting value
1	MAC address	Write the MAC addresses of the clients whose network connections are to be controlled, one address per line. Specify each MAC address as 12 hexadecimal digits. MAC addresses are not case sensitive. You can use a delimiter after every second digit. Only one type of delimiter can be used in one MAC address. Hyphens (-) or colons (:) can be used as the delimiter, or you can write the addresses without any delimiter. Note that spaces cannot be used as a delimiter.
2	IP address	Specify the IP address corresponding to the MAC address in IPv4 format (xxx.xxx.xxx.xxx).
3	Host name	Specify the host name of the client using a string with 64 or fewer bytes.

(3) Specification example

 
00:11:22:33:44:11,192.168.1.111,client01 
00:11:22:33:44:22,192.168.1.222,client02 
00:11:22:33:44:33,192.168.1.333,client03 
00:11:22:33:44:44,, 
,192.168.1.444, 
,,client04

[Contents][Back][Next]

[Trademarks]

All Rights Reserved. Copyright (C) 2009, 2011, Hitachi, Ltd.
Copyright, patent, trademark, and other intellectual property rights related to the "TMEng.dll" file are owned exclusively by Trend Micro Incorporated