Job Management Partner 1/Automatic Job Management System 3 Messages 1

2.1 Messages beginning with KAVC (Messages about JP1/AJS3 Console)

This section lists the messages that begin with KAVC (Messages about JP1/AJS3 Console).

Organization of this section

(1) KAVC0001 to KAVC2000 (messages about JP1/AJS3 Console Manager)

(2) KAVC2001 to KAVC4000 (messages about JP1/AJS3 Console Agent)

(3) KAVC4001 to KAVC6000 (messages about JP1/AJS3 Console View)

(4) KAVC6001 to KAVC7000 (messages on unknown status or operation failures)

(1) KAVC0001 to KAVC2000 (messages about JP1/AJS3 Console Manager)

KAVC0001-I
JP1/AJS2 Console Manager service started.

The JP1/AJS3 Console Manager has started.

(S)

Continues processing.

KAVC0002-I
JP1/AJS2 Console Manager service ended.

The JP1/AJS3 Console Manager service has terminated.

(S)

Terminates the JP1/AJS3 Console Manager service.

KAVC0081-I
JP1/AJS2 Console Manager service has been installed.

The JP1/AJS3 Console Manager service has been set up.

(S)

Sets up the JP1/AJS3 Console Manager service.

KAVC0082-I
JP1/AJS2 Console Manager service has been removed.

The JP1/AJS3 Console Manager service has been removed.

(S)

Removed the JP1/AJS3 Console Manager service.

KAVC0083-I
Stopping JP1/AJS2 Console Manager service.

Now stopping the JP1/AJS3 Console Manager service.

(S)

Stops the JP1/AJS3 Console Manager service.

KAVC0084-E
JP1/AJS2 Console Manager service is set up already.

Setup processing for JP1/AJS3 Console Manager was not performed because the JP1/AJS3 Console Manager service has already been set up.

(S)

Terminates setup processing.

(O)

Make sure that the JP1/AJS3 Console Manager service has been set up.

KAVC0085-E
JP1/AJS2 Console Manager service is not set up.

The JP1/AJS3 Console Manager service was not deleted because the JP1/AJS3 Console Manager service has not been set up.

(S)

Terminates setup processing.

(O)

Check whether the JP1/AJS3 Console Manager service has been set up.

KAVC0086-E
An error occurred during installing JP1/AJS2 Console Manager service. : maintenance-information-1 maintenance-information-2

An error occurred during setup of the JP1/AJS3 Console Manager service.

(S)

Terminates setup processing.

(O)

Execute the setup command while logged on as an OS user who is a member of the Administrators group. If the UAC function is enabled in Windows, the administrator must re-execute the command. Memory or disk space may be insufficient. Terminate unnecessary applications, and then re-execute the setup command.

KAVC0087-E
An error occurred during removing JP1/AJS2 Console Manager service. : maintenance-information-1 maintenance-information-2

An error occurred during deletion of the JP1/AJS3 Console Manager service.

(S)

Terminates setup processing.

(O)

Execute the setup command while logged on as an OS user who is a member of the Administrators group. Memory or disk space may be insufficient. Terminate unnecessary applications, and then re-execute the setup command.

KAVC0100-E
Illegal option (option) exists.

An invalid option is specified.

(S)

Cancels command execution.

(O)

Specify the correct option, and then re-execute the command.

KAVC0101-E
Value for option (option) is not specified.

The option does not contain any value.

(S)

Cancels command execution.

(O)

Specify the value for the option, and then re-execute the command.

KAVC0102-E
Extra argument(s) exist.

One or more unnecessary arguments were specified.

(S)

Cancels command execution.

(O)

Delete the unnecessary arguments, and then re-execute the command.

KAVC0103-E
Invalid value for option (option).

The option contains an invalid value.

(S)

Cancels command execution.

(O)

Correct the value for the option, and then re-execute the command.

KAVC0104-E
Option (option) appears twice or more.

The same option was specified more than once.

(S)

Cancels command execution.

(O)

Specify the option only once, and then re-execute the command.

KAVC0108-E
Only super user or administrator can execute.

A user who does not have superuser privileges or is not logged on as a member of the Administrators group attempted to execute a command.

(S)

Cancels command execution.

(O)

Execute the command while logged on as a user with superuser privileges or as a member of the Administrators group.

If the UAC function is enabled in Windows, the administrator must re-execute the command.

KAVC0119-E
Cannot use - in use by other user. : file-name

The operation is impossible because another user is using the file that you attempted to manipulate.

(S)

Cancels command execution.

(O)

Wait for the other user to finish using the file, and then re-execute the command.

KAVC0126-E
Operand value exceeds prescribed length.

The value of the operand exceeds the prescribed length. If this error occurred during execution of the ajscmprint command, the probable causes are:

The JP1 user name specified in the -u argument exceeds 31 bytes.

The logical host name specified in the -mh argument exceeds 255 bytes.

(S)

Cancels command execution.

(O)

Correct the error, and then re-execute the command.

KAVC0127-E
Specified file (file-name) does not exist.

The file does not exist.

(S)

Cancels command execution.

(O)

Correct the file name or create the file. Then, re-execute the command.

KAVC0150-E
The business scope cannot be displayed because another user is currently changing the definition.

An attempt to display the business scope for the JP1 user specified in the -u option of the ajscmprint command has failed because another user is currently defining that business scope.

(S)

Cancels command execution.

(O)

Set the monitoring mode to the JP1/AJS3 Console View to which the JP1 user specified in the -u option has logged on. Alternatively, terminate JP1/AJS3 Console View then re-execute the command.

KAVC0151-E
The definition information of the specified user was not found. : maintenance-information

The business scope for the JP1 user specified in the -u option of the ajscmprint command is not defined. If this message appears even though the business scope is defined, the probable causes are:

The JP1 user name specified in the -u option is invalid.

If you are using a logical host, the logical host is not correctly specified in the -mh option or JP1_HOSTNAME environment variable.

(S)

Cancels command execution.

(O)

Correct the cause of the error, and then re-execute the command.

KAVC0152-E
The logical host name is invalid. : maintenance-information

The logical host name specified in the command option and JP1_HOSTNAME environment variable is invalid.

(S)

Cancels command execution.

(O)

Correct the cause of the error, and then re-execute the command.

KAVC0158-E
Invalid options are specified.

An invalid option is specified.

(S)

Cancels command execution.

(O)

Specify the correct option, and then re-execute the command.

KAVC0200-E
Failed to convert string (string-before-character-set-conversion) : maintenance-information-1 maintenance-information-2 maintenance-information-3

Character set conversion failed.

(S)

Cancels processing.

(O)

If the KAVC0902-E message was output before this message, memory is insufficient. Take action according to the instructions given by the KAVC0902-E message.

If the KAVC0902-E message was not output before this message, contact the system administrator and collect data.

For details about the data you must collect, see 1.3 Data to be collected when a problem occurs in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting and 1.4 Collecting data for troubleshooting in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.

KAVC0330-E
No authorization.

You do not have permission for the related file and directory.

(S)

Cancels command execution if the error occurred during command execution. For other cases, the system cancels processing.

(O)

If the error occurred during execution of a command, execute the command after logging on as a user who has the necessary privileges. For other cases, check the privileges required for a user who wants to execute the service.

KAVC0331-E
Invalid specification in configuration definition. (item-name)

The JP1/AJS3 Console Manager environment settings contain an invalid specification.

(S)

Uses the default to continues processing.

(O)

Set the environment setting parameter indicated in item-name correctly according to 2.8 Setting up the JP1/AJS3 Console environment in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 2.

If DATADIRECTORY is indicated in item-name, make sure that the directory specified in the DATADIRECTORY environment setting parameter exists. If it does not exist, create a directory.

If this message (item-name is DATADIRECTORY) appears when you execute the ajscmprint command in a cluster environment, make sure that the machine on which the command was executed is the primary node of the specified logical host. If it is not the primary node, execute the ajscmprint command on the primary node.

KAVC0355-E
Invalid data received from JP1/AJS2 Console Agent. (maintenance-information-1, maintenance-information-2)

Invalid data was received from JP1/AJS3 Console Agent.

(S)

Cancels the communication with JP1/AJS3 Console Agent and continues processing.

(O)

Make sure that the port number (jp1ajs2ca) defined in the JP1/AJS3 Console Manager machine matches the definition in the JP1/AJS3 Console Agent machine being monitored.

KAVC0356-E
Defined data is corrupted. : maintenance-information

Processing is impossible due to corrupted definition data.

(S)

Cancels processing for the JP1 user with the corrupted definition data and continues processing.

(O)

Stop the JP1/AJS3 Console Manager service, collect the following data, and then contact the system administrator:

JP1/AJS3 Console Manager log

Data directory

For details on how to collect the log, see 1.3 Data to be collected when a problem occurs in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting and 1.4 Collecting data for troubleshooting in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.

After collecting the data, delete the data directory. Then, restore the data directory from the backup.

After restoring the data, start the JP1/AJS3 Console Manager service.

The default path to the data directory is as follows:

In Windows Server 2008:
%ALLUSERSPROFILE%\HITACHI\JP1\JP1_DEFAULT\JP1AJS2CM\database (The default for %ALLUSERSPROFILE% is system-drive\ProgramData.)

In Windows Server 2003:
JP1/AJS3 Console-installation-folder\database

In UNIX:
/var/opt/jp1ajs2cm/database

If you are using the JP1/AJS3 Console Manager service on a logical host or specify a path other than the default, see the value of the DATADIRECTORY environment setting parameter.

KAVC0385-E
Invalid data received from JP1/AJS2 Console View. (maintenance-information-1, maintenance-information-2)

Invalid data was received from JP1/AJS3 Console View or another program.

(S)

Cancels the communication with JP1/AJS3 Console Agent and continues processing.

(O)

Make sure that no illegal access was made to the port number (jp1ajs2cm) defined in the JP1/AJS3 Console Manager machine from a program other than JP1/AJS3 Console View.

KAVC0456-E
Cannot connect because the number of connections exceeded the maximum.

A connection is no longer possible because the number of connections with JP1/AJS3 Console View exceeds the value specified in the MAXSESSION environment setting parameter.

(S)

Continues processing, and determines any connection exceeding the maximum to be an error.

(O)

Terminate unnecessary instance of JP1/AJS3 Console View. If necessary, re-set the value of the environment setting parameter MAXSESSION.

KAVC0532-I
Reception processing from JP1/AJS2 Console View has started. (From: IP-address, To: logical-host-name), JP1-user-name, PID: process-ID)

The processing accepted from JP1/AJS3 Console View has started. The connection for user-name from IP-address was accepted at logical-host-name. After this, the process indicated by process-ID started.

(S)

Continues processing.

KAVC0533-I
Reception processing from JP1/AJS2 Console View has ended. (PID: process-ID)

The processing accepted from JP1/AJS3 Console View has terminated. The process indicated by process-ID has terminated.

(S)

Terminates processing that was accepted from JP1/AJS3 Console View.

KAVC0802-E
Cannot connect to Access Control Server.

The access control server could not be connected.

(S)

Continues processing, determining the connection from JP1/AJS3 Console View to be an error.

(O)

Make sure that the authentication server name is correct, and that the authentication server has started on the specified authentication server host.

KAVC0803-E
Login information is invalid.

The connection from JP1/AJS3 Console View cannot be accepted because login information is invalid.

(S)

Continues processing, determining the connection from JP1/AJS3 Console View to be an error.

(O)

The Login screen appears on JP1/AJS3 Console View. Enter the password to log on again.

KAVC0805-E
Logical host's composition is not right.

The JP1/AJS3 Console Manager settings were not found in the logical host connected from JP1/AJS3 Console View.

(S)

Continues processing, determining the connection from JP1/AJS3 Console View to be an error.

(O)

Follow the instructions given by the KAVC4507-E error message that was displayed on JP1/AJS3 Console View when you logged on.

KAVC0806-E
Environment file name length exceeds 255 bytes.

The name of the environment variable file is more than 255 bytes, which is the maximum length of the host name.

(S)

Cancels execution of the command.

(O)

Check the setting of the JP1_HOSTNAME environment variable.

KAVC0807-E
An error exists in the certification server setting of the host (host-name). (login point IP address: IP-address)

The setting of the authentication server for the host indicated by the IP address contains an error.

(S)

Continues processing, determining the connection from JP1/AJS3 Console View to be an error.

(O)

Check and correct the setting of the authentication server for the host. Also make sure that the host name matches the IP address shown in the message.

KAVC0901-E
I/O error occurred.: maintenance-information-1 maintenance-information-2 maintenance-information-3

A file I/O error occurred during processing.

(S)

Cancels the processing for the file in which the error occurred, and continues the process. However, the system cancels the process if it cannot continue processing because of a system file I/O error.

(O)

Collect the syslog, and then contact the system administrator.

KAVC0902-E
Insufficient memory occurred.: maintenance-information-1 maintenance-information-2 maintenance-information-3

The system cancels the processing during which insufficient memory was detected. If insufficient memory was detected during allocation of memory for a key component that could not continue processing, the system aborts the process.

(S)

Cancels the process in which the error occurred.

(O)

Check the following settings. Then, if necessary, re-execute the processing for which memory was insufficient.

In UNIX, see Release Notes, and make sure that the value of the kernel parameter for memory is greater than the estimated value.

Check the status of the process that was running when the error occurred to make sure that the amount of memory available is greater than the estimated value.

KAVC0903-E
System error occurred.: maintenance-information-1 maintenance-information-2 maintenance-information-3 maintenance-information-4

A system error occurred during processing.

(S)

Cancels the process in which the error occurred.

(O)

Contact the system administrator, and collect data.

For details about the data you must collect, see 1.3 Data to be collected when a problem occurs in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting and 1.4 Collecting data for troubleshooting in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.

KAVC0904-E
Unexpected error occurred in JP1/AJS2 Console Manager.: maintenance-information-1 maintenance-information-2 maintenance-information-3 maintenance-information-4

An unexpected error occurred during processing.

(S)

Cancels the process in which the error occurred. If possible, the system outputs the core dump for the process.

(O)

Contact the system administrator, and collect data.

For details about the data you must collect, see 1.3 Data to be collected when a problem occurs in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting and 1.4 Collecting data for troubleshooting in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.

KAVC0905-E
Failed to put message (message-ID).: maintenance-information-1 maintenance-information-2 maintenance-information-3 maintenance-information-4

The system attempted to output an error message because an error occurred, but it failed.

(S)

Cancels the process in which the error occurred.

(O)

Take actions according to the displayed message and the error message provided by the system.

KAVC0907-E
No more space in file (file-name).

The file system or the device does not have sufficient free space for writing a file.

(S)

Cancels the process in which the error occurred.

(O)

Delete unnecessary files to make free space. If you want to write to a user file, output it to another file system or device.

KAVC0920-W
Message process failed to initialize. (maintenance-information)

The message output could not be initialized.

(S)

The message is output without text. If HNTR_Initialize Failure is shown in maintenance-information, no message is output to the integrated trace log.

(O)

Check whether resources are insufficient. Also check the running status of Hitachi Network Objectplaza Trace Monitor.

In UNIX, see Release Notes, and check the following items in the kernel parameters:

Maximum number of files allowed to be open for a process or system

Maximum number of file descriptors allowed (a limit value related to the file system)

KAVC0950-E
File processing count exceeds the limit.

The number of files to be processed exceeded the limit.

(S)

Cancels the process in which the error occurred.

(O)

Terminate unnecessary windows, dialog boxes, and processes, and then re-execute the operation.

In UNIX, see Release Notes, and check the following items in the kernel parameters:

Maximum number of files allowed to be open for a process or system

Maximum number of file descriptors allowed (a limit value related to the file system)

KAVC0951-E
Not enough space in file system.

The file system does not have sufficient space.

(S)

Cancels the process in which the error occurred.

(O)

Terminate unnecessary windows, dialog boxes, and processes, and delete unnecessary files to increase available free space. Then re-execute the operation.

In UNIX, see Release Notes, and check the following items in the kernel parameters:

Maximum number of files allowed to be open for a process or system

Maximum number of file descriptors allowed (a limit value related to the file system)

KAVC0953-E
System resources became insufficient.

System resources became insufficient.

(S)

Cancels the process in which the error occurred.

(O)

Terminate unnecessary windows, dialog boxes, and processes, and then re-execute the operation.

In UNIX, see Release Notes, and check the following items in the kernel parameters:

Maximum number of files allowed to be open for a process or system

Maximum number of file descriptors allowed (a limit value related to the file system)

(2) KAVC2001 to KAVC4000 (messages about JP1/AJS3 Console Agent)

KAVC2001-I
JP1/AJS2 Console Agent service started.

The JP1/AJS3 Console Agent service has started.

(S)

Continues processing.

KAVC2002-I
JP1/AJS2 Console Agent service ended.

The JP1/AJS3 Console Agent service has terminated.

(S)

Terminates the JP1/AJS3 Console Agent service.

KAVC2081-I
JP1/AJS2 Console Agent service has been installed.

The JP1/AJS3 Console Agent service has been set up.

(S)

Terminates setup processing.

KAVC2082-I
JP1/AJS2 Console Agent service has been removed.

The JP1/AJS3 Console Agent has been removed.

(S)

Terminates setup processing.

KAVC2083-I
Stopping JP1/AJS2 Console Agent service.

The system is stopping the JP1/AJS3 Console Agent service.

(S)

Is stopping the JP1/AJS3 Console Agent service.

KAVC2084-E
JP1/AJS2 Console Agent service has already been installed.

Setup processing for JP1/AJS3 Console Agent was not performed because the JP1/AJS3 Console Agent service has already been set up.

(S)

Terminates setup processing.

(O)

Make sure that the JP1/AJS3 Console Agent service has been set up.

KAVC2085-E
JP1/AJS2 Console Agent service has not been installed yet.

The JP1/AJS3 Console Agent service was not deleted because the JP1/AJS3 Console Agent service has not been set up.

(S)

Terminates setup processing.

(O)

Check whether the JP1/AJS3 Console Agent service has been set up.

KAVC2086-E
An error occurred during installing JP1/AJS2 Console Agent service.: maintenance-information-1 maintenance-information-2

An error occurred during setup of the JP1/AJS3 Console Agent service.

(S)

Terminates setup processing.

(O)

Execute the setup command while logged on as an OS user who is a member of the Administrators group. If the UAC function is enabled in Windows, the administrator must re-execute the command. Memory or disk space may be insufficient. Terminate unnecessary applications, and then re-execute the setup command.

KAVC2087-E
An error occurred during removing JP1/AJS2 Console Agent service.: maintenance-information-1 maintenance-information-2

An error occurred during the removal of the JP1/AJS3 Console Agent service.

(S)

Terminates setup processing.

(O)

Execute the setup command with the privileges of an OS user who is a member of the Administrators group. Memory or disk space may be insufficient. Terminate unnecessary applications, and then re-execute the setup command.

KAVC2100-E
Illegal option (option) exists.

An invalid option is specified.

(S)

Cancels command execution.

(O)

Specify the correct option, and then re-execute the command.

KAVC2102-E
Extra argument(s) exist.

One or more unnecessary arguments are specified.

(S)

Cancels command execution.

(O)

Delete unnecessary arguments, and then re-execute the command.

KAVC2103-E
Invalid value for option (option).

An incorrect value is specified for the option.

(S)

Cancels command execution.

(O)

Specify the correct value for the option, and then re-execute the command.

KAVC2108-E
Only super user or administrator can execute.

A user who did not have superuser privileges or did not log on as a member of the Administrators group attempted to execute the command.

(S)

Cancels command execution.

(O)

Execute the command while logged on as a user with superuser privileges or as a member of the Administrators group.If the UAC function is enabled in Windows, the administrator must re-execute the command.

KAVC2119-E
Cannot use - in use by other user.: file-name

You cannot perform the operation on the file because another user is using it.

(S)

Cancels command execution.

(O)

Wait for the other user to finish using the file, and then re-execute the command.

KAVC2127-E
Specified file (file-name) does not exist.

The specified file does not exist.

(S)

Cancels command execution.

(O)

Specify the correct file name or create a file, and then re-execute the command.

KAVC2158-E
Invalid options are specified.

Invalid options are specified.

(S)

Cancels command execution.

(O)

Specify the correct options, and then re-execute the command.

KAVC2200-E
Failed to convert string (string-before-character-set-conversion) : maintenance-information-1 maintenance-information-2 maintenance-information-3

Character set conversion failed.

(S)

Cancels processing.

(O)

If the KAVC2902-E message was output before this message, memory is insufficient. Take action according to the instructions given by the KAVC2902-E message.

If the KAVC2902-E message was not output before this message, contact the system administrator and collect data.

For details about the data you must collect, see 1.3 Data to be collected when a problem occurs in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting and 1.4 Collecting data for troubleshooting in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.

KAVC2330-E
No authorization.

You do not have authorization for the related files and directories.

(S)

Cancels command execution if the error occurred during command execution. For other cases, the system cancels processing.

(O)

If the error occurred during execution of a command, execute the command as a user who has the required privileges. For other cases, check the privileges required for a user who wants to execute the service.

KAVC2331-E
Invalid specification in configuration definition. (item-name)

The environment setting for JP1/AJS3 Console Agent contains an invalid specification.

(S)

Continues processing with the default values.

(O)

Set the environment setting parameter indicated in item-name correctly according to 2.8 Setting up the JP1/AJS3 Console environment in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 2.

KAVC2381-E
JP1/AJS2 Console Agent service has already started monitoring. maintenance-information

Although JP1/AJS3 Console Agent has already started monitoring, it received a request for an object list update or for a start of monitoring it, from JP1/AJS3 Console Manager.

(S)

Cancels the communication with JP1/AJS3 Console Manager and continues processing.

(O)

Contact the system administrator and collect data.

For details about the data you must collect, see 1.3 Data to be collected when a problem occurs in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting and 1.4 Collecting data for troubleshooting in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.

KAVC2382-E
JP1/AJS2 Console Agent service is not ready to start monitoring. maintenance-information

JP1/AJS3 Console Agent received a monitoring request from JP1/AJS3 Console Manager, but is not ready for monitoring.

(S)

Cancels the communication with JP1/AJS3 Console Manager and continues processing.

(O)

Contact the system administrator and collect data.

For details about the data you must collect, see 1.3 Data to be collected when a problem occurs in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting and 1.4 Collecting data for troubleshooting in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.

KAVC2383-E
JP1/AJS2 Console Agent service has already stopped monitoring. maintenance-information

JP1/AJS3 Console Agent received a monitoring request from JP1/AJS3 Console Manager, but has already stopped monitoring.

(S)

Cancels the communication with JP1/AJS3 Console Manager and continues processing.

(O)

Contact the system administrator and collect data.

For details about the data you must collect, see 1.3 Data to be collected when a problem occurs in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting and 1.4 Collecting data for troubleshooting in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.

KAVC2384-E
JP1/AJS2 Console Agent service is not updating the monitored object list. maintenance-information

JP1/AJS3 Console Manager sent a list of objects to be monitored, but JP1/AJS3 Console Agent is not ready to receive it.

(S)

Cancels the communication with JP1/AJS3 Console Manager and continues processing.

(O)

Contact the system administrator and collect data.

For details about the data you must collect, see 1.3 Data to be collected when a problem occurs in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting and 1.4 Collecting data for troubleshooting in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.

KAVC2385-E
Invalid data has been received from JP1/AJS2 Console Manager. maintenance-information

The system received invalid data from JP1/AJS3 Console Manager or some other program.

(S)

Cancels the communication with JP1/AJS3 Console Manager and continues processing.

(O)

Make sure that no illegal access was made to the port number (jp1ajs2ca) defined in the JP1/AJS3 Console Agent machine from a program other than JP1/AJS3 Console Manager.

KAVC2386-E
An invalid value exists in the monitoring properties.: maintenance-information-1 maintenance-information-2 maintenance-information-3

The monitoring property values received from JP1/AJS3 Console Manager are invalid.

(S)

Cancels the communication with JP1/AJS3 Console Manager and continues processing.

(O)

The monitoring method specified in JP1/AJS3 Console Manager may not be supported in JP1/AJS3 Console Agent. If it is not supported, the status of the monitored object displayed in JP1/AJS3 Console View becomes Unknown, and the KAVC6251-E message appears in the Information text area in the Detailed Information dialog box. Specify the monitoring method supported by the current version of your program.

KAVC2387-E
The request from JP1/AJS2 Console Manager could not be processed.: maintenance-information-1 maintenance-information-2

JP1/AJS3 Console Manager sent a request, but JP1/AJS3 Console Agent is not ready to receive it.

(S)

Cancels the communication with JP1/AJS3 Console Manager and continues processing.

(O)

Contact the system administrator and collect data.

For details about the data you must collect, see 1.3 Data to be collected when a problem occurs in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting and 1.4 Collecting data for troubleshooting in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.

KAVC2388-E
An attempt to start the command failed.: maintenance-information

The command specified in a command execution request received from JP1/AJS3 Console Manager could not be started.

(S)

Continues processing, determining the operation to be an error.

(O)

Memory and system resources may be insufficient. Make sure that there is sufficient memory available. Also make sure that the values set in the kernel parameters are correct according to Release Notes.

KAVC2456-E
Cannot connect because the number of connections exceeded the maximum.

No more connections can be made because the number of connections from JP1/AJS3 Console Manager exceeded the value specified in the MAXSESSION environment setting parameter.

(S)

Continues processing, determining any connection exceeding the maximum to be an error.

(O)

If JP1/AJS3 Console View monitors hosts on the machine unnecessarily, terminate JP1/AJS3 Console View. If necessary, respecify a value in MAXSESSION.

KAVC2457-E
Cannot connect to host. maintenance-information

Since a connection to hosts is restricted, the host to be connected cannot be identified on JP1/AJS3 Console Agent when JP1/AJS3 Console Manager is connected to JP1/AJS3 Console Agent.

(S)

Continues processing, determining the connection from JP1/AJS3 Console Manager to be an error.

(O)

Check whether the correct host name is specified in the AJS2 unit monitored object. In an environment in which two or more LANs are connected, check the JP1/Base settings for error.

KAVC2532-I
Reception processing from JP1/AJS2 Console Manager has started. (From: IP-address, To: logical-host-name, PID: process-ID)

Processing that accepted a connection from JP1/AJS3 Console Manager starts. The process from the IP address indicated by From was accepted at the logical host indicated by To, and the processing indicated by PID has started.

(S)

Continues processing.

KAVC2533-I
Reception processing from JP1/AJS2 Console Manager has ended. process-information

A connection request from JP1/AJS3 Console Manager was accepted, so processing for JP1/AJS3 Console Agent is terminated.

(S)

Terminates processing accepted from JP1/AJS3 Console Manager.

KAVC2534-I
JP1/AJS2 Console Agent service will connect to the scheduler service (service-name). JP1-user-name process-information

The JP1/AJS3 Console Agent service connected to the scheduler service (service-name), and started collecting information.

(S)

Continues processing.

KAVC2535-I
JP1/AJS2 Console Agent service will disconnect from the scheduler service (service-name). JP1-user-name process-information

The JP1/AJS3 Console Agent service terminates the connection with the service scheduler service (service-name).

(S)

Terminates the collection of information and continues processing.

KAVC2536-I
The refreshing request has started.

Processing of a request has started. The request, accepted from JP1/AJS3 Console Manager, was to acquire the latest information.

(S)

Continues processing.

KAVC2537-I
The refreshing request has ended.

Processing of a request has ended. The request, accepted from JP1/AJS3 Console Manager, was to acquire the latest information.

(S)

Terminates the update to the latest information and continues processing.

KAVC2538-I
The command execution request will now start.: command-name

Processing of a request has started. The request, accepted from JP1/AJS3 Console Manager, was to execute a command.

(S)

Continues processing.

KAVC2539-I
The command execution request will now end.: command-name

Processing of a request has ended. The request, accepted from JP1/AJS3 Console Manager, was to execute the command.

(S)

Terminates command execution and continues processing.

KAVC2804-E
The user-mapping has failed. maintenance-information-1 maintenance-information-2 maintenance-information-3

User mapping failed.

(S)

Releases the connection with JP1/AJS3 Console Manager and continues processing.

(O)

The status of a monitored object displayed in JP1/AJS3 Console View is Unknown, and the KAVC6222-E message appears in the Information text area in the Detailed Information dialog box for that object. Follow the instructions given by the message KAVC6222-E to make sure that user mapping has been specified correctly with the JP1 user name with which the user has logged on to JP1/AJS3 Console View.

KAVC2805-E
The logical host's configuration is incorrect.: maintenance-information

The physical host or logical host settings for JP1/AJS3 - Manager are incorrect.

The probable causes are:

JP1/AJS3 Manager has not been set up on the logical host.

The physical host name is more than 255 bytes.

(S)

Releases the connection with JP1/AJS3 Console Manager and continues processing.

(O)

If the host name indicated in maintenance-information is JP1_DEFAULT, make sure that the host name is no more than 255 bytes.

If the host name indicated in maintenance-information is a logical host name, JP1/AJS3 - Manager has not been set up on the logical host. Check the specification of the host name of the monitoring destination for the AJS2 unit monitoring object.

KAVC2901-E
I/O error occurred. maintenance-information-1 maintenance-information-2 maintenance-information-3:

A file I/O error occurred during processing.

(S)

Cancels processing for the file in which the error occurred, and continues the process. However, the system cancels the process if it cannot continue the process because of a system file I/O error.

(O)

Collect the syslog, and then contact the system administrator.

KAVC2902-E
Insufficient memory occurred.: maintenance-information-1 maintenance-information-2 maintenance-information-3

Memory became insufficient.

(S)

Cancels the processing during which insufficient memory was detected. If insufficient memory was detected during allocation of memory for a key component that could not continue processing, the system aborts the process.

(O)

Check the following settings. If necessary, re-execute the processing for which memory was insufficient.

In UNIX, see Release Notes and make sure that the value of the kernel parameter for memory is greater than the estimated value.

Check the status of the process that was running when the error occurred to make sure that the amount of memory available is greater than the estimated value.

KAVC2903-E
System error occurred.: maintenance-information-1 maintenance-information-2 maintenance-information-3 maintenance-information-4

A system error occurred during processing.

(S)

Terminates the process in which the error occurred.

(O)

Contact the system administrator and collect data.

For details about the data you must collect, see 1.3 Data to be collected when a problem occurs in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting and 1.4 Collecting data for troubleshooting in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.

KAVC2904-E
Unexpected error occurred in JP1/AJS2 Console Agent.: maintenance-information-1 maintenance-information-2 maintenance-information-3 maintenance-information-4

An unexpected error occurred during processing.

(S)

Terminates the process in which the error occurred. If possible, the system outputs the core dump of the process.

(O)

Contact the system administrator and collect data.

For details about the data you must collect, see 1.3 Data to be collected when a problem occurs in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting and 1.4 Collecting data for troubleshooting in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.

KAVC2905-E
Failed to put message (message-ID).: maintenance-information-1 maintenance-information-2 maintenance-information-3 maintenance-information-4

The system attempted to output a message because an error occurred, but it failed.

(S)

Cancels the process in which the error occurred.

(O)

Take action according to the displayed message and the error message provided by the system.

KAVC2907-E
No more space in file (file-name).

The file system or the device does not have sufficient free space for writing a file.

(S)

Cancels the process in which the error occurred.

(O)

Delete unnecessary files to make free space. If you want to write a user file, output it to another file system or device.

KAVC2920-W
Message process failed to initialize. (maintenance-information)

The message output could not be initialized.

(S)

The message is output without text. If HNTR_Initialize Failure is shown in maintenance-information, no message is output to the integrated trace log.

(O)

Check whether resources are insufficient. Also check the running status of Hitachi Network Objectplaza Trace Monitor.

In UNIX, see Release Notes, and check the following items in the kernel parameters:

Maximum number of files allowed to be open for a process or system

Maximum number of file descriptors allowed (a limit value related to the file system)

KAVC2950-E
File processing count exceeds the limit.

The number of files to be processed exceeded the limit.

(S)

Cancels the process in which the error occurred.

(O)

Terminate unnecessary windows, dialog boxes, and processes, and then re-execute the operation.

In UNIX, see Release Notes, and check the following items in the kernel parameters:

Maximum number of files allowed to be open for a process or system

Maximum number of file descriptors allowed (a limit value related to the file system)

KAVC2951-E
Not enough space in file system.

The file system does not have sufficient space.

(S)

Cancels the process in which the error occurred.

(O)

Terminate unnecessary windows, dialog boxes, and processes, and delete unnecessary files to increase available free space. Then re-execute the operation.

In UNIX, see Release Notes, and check the following items in the kernel parameters:

Maximum number of files allowed to be open for a process or system

Maximum number of file descriptors allowed (a limit value related to the file system)

KAVC2953-E
System resources became insufficient.

System resources became insufficient.

(S)

Cancels the process in which the error occurred.

(O)

Terminate unnecessary windows, dialog boxes, and processes, and then re-execute the operation.

In UNIX, see Release Notes, and check the following items in the kernel parameters:

Maximum number of files allowed to be open for a process or system

Maximum number of file descriptors allowed (a limit value related to the file system)

(3) KAVC4001 to KAVC6000 (messages about JP1/AJS3 Console View)

KAVC4001-E
During (process-name), (exception-name) occurred. JP1/AJS3 Console View will now end.
Detailed information [(maintenance-information)]

The exception exception-name occurred during the execution of process-name.

(S)

Terminates JP1/AJS3 Console View.

(O)

Collect the following data, and then contact the system administrator.

A hardcopy of the window

JP1/AJS3 Console View log files

Click the OK button in this message dialog box, and then collect the JP1/AJS3 Console View log files.

KAVC4002-E
During (process-name), Memory became insufficient. JP1/AJS3 Console View will now end.
Detailed information [(maintenance-information)]

Memory became insufficient during the execution of process-name.

(S)

Terminates JP1/AJS3 Console View.

(O)

See 14.2.5 Specifying memory usage in the Job Management Partner 1/Automatic Job Management System 3 Operator's Guide and change the maximum memory size that JP1/AJS3 Console View can use. Then restart JP1/AJS3 Console View.

KAVC4003-E
During (process-name), a required class file ((class-file-name)) was not found.
Detailed information [(maintenance-information)]

The class file required to execute JP1/AJS3 Console View was not found.

(S)

Terminates JP1/AJS3 Console View.

(O)

The configuration of JP1/AJS3 - View may have been corrupted. Perform a repair installation.

KAVC4004-E
During (process-name), the system error occurred. (error factor: (cause-of-error))

A system error occurred during the execution of process-name.

(S)

Terminates JP1/AJS3 Console View.

(O)

The configuration of JP1/AJS3 - View may have been corrupted. Perform a repair installation.

KAVC4005-E
An unexpected error occurred in start processing.
(Detailed information: (maintenance-information-1), (maintenance-information-2))

An unexpected error occurred during the start of JP1/AJS3 Console View.

(S)

Cancels processing.

(O)

Memory or free space on the disk may be insufficient. Terminate unnecessary applications, and then restart JP1/AJS3 Console View. If the error persists, the configuration of JP1/AJS3 - View may have been corrupted. Perform a repair installation.

KAVC4006-E
Failed to start JP1/AJS3 Console View.
(Detailed information: (maintenance-information))

JP1/AJS3 Console View could not be started.

(S)

Cancels processing.

(O)

Memory or free space on the disk may be insufficient. Terminate unnecessary applications, and then restart JP1/AJS3 Console View. Do not install JP1/AJS3 Console View directly to the root level of the c:\ drive. If the error persists, the configuration of JP1/AJS3 - View may have been corrupted. Perform a repair installation.

KAVC4008-E
JP1/AJS2 - View is installed in an invalid folder.

JP1/AJS3 Console View cannot start because it has been installed in an invalid folder.

(S)

Cancels processing.

(O)

Make sure that the JP1/AJS3 Console View startup file (ajscon.exe) exists in the following folder:

JP1/AJS3 - View-installation-folder\bin

KAVC4010-E
An option specified in ajscon2.conf is too long.

JP1/AJS3 Console View cannot start because the option specified in jreparam in ajscon2.conf is too long.

(S)

Cancels processing.

(O)

Compare ajscon2.conf against ajscon2.conf.model to check for any unnecessary options that have been specified.

KAVC4011-E
The command line parameter is too long.

JP1/AJS3 Console View cannot start because the command line parameter specified in the ajscon command is too long.

(S)

Cancels processing.

(O)

Correctly specify the command line parameter, and then re-execute the ajscon command.

KAVC4012-E
There is an invalid parameter. [(invalid-parameter)]

An invalid parameter was specified in the ajscon command.

(S)

Terminates JP1/AJS3 Console View.

(O)

Correct the invalid parameter, and then re-execute the command.

KAVC4013-E
A required parameter is missing. [(missing-parameter)]

A parameter required for the ajscon command is missing.

(S)

Terminates JP1/AJS3 Console View.

(O)

Add the required parameter, and then re-execute the command.

KAVC4014-E
The same parameter has already been defined. [(same-parameter)]

The same parameter was specified more than once in the ajscon command.

(S)

Terminates JP1/AJS3 Console View.

(O)

Delete the duplicate parameter, and then re-execute the command.

KAVC4015-E
The port number could not be obtained. Confirm whether the service name is defined correctly.

The port number to connect to JP1/AJS3 Console Manager could not be obtained.

(S)

Terminates JP1/AJS3 Console View.

(O)

Check whether the correct service name and the correct port number of jp1ajs2cm are specified in the services file. If the port number is defined correctly, memory or free space on the disk may be insufficient. Terminate unnecessary applications, and then restart JP1/AJS3 Console View.

KAVC4016-E
JP1/AJS3 Console View cannot be used because it has not been set up.

JP1/AJS3 Console View cannot start because JP1/AJS3 Console View has not been set up.

(S)

Cancels processing.

(O)

Set up JP1/AJS3 Console View.

KAVC4017-E
Setup cannot be executed because the installation was incorrect.

Setup cannot be executed because JP1/AJS3 - View has not been installed correctly.

(S)

Cancels processing.

(O)

The configuration of JP1/AJS3 - View may have been corrupted. Perform a repair installation.

KAVC4018-E
You do not have permission to execute the setup program.

A user who did not log on as a member of the Administrators group attempted to execute the JP1/AJS3 Console View setup command.

(S)

Cancels processing.

(O)

Execute the JP1/AJS3 Console View setup command as a member of the Administrators group.

KAVC4019-E
Setup failed. (Detailed information: (maintenance-information))

The setup command could not be executed.

(S)

Cancels processing.

(O)

Memory or free space on the disk may be insufficient. Terminate unnecessary applications, and then re-execute the setup command. If JP1/IM Console View is indicated in maintenance-information, make sure that JP1/IM - Console View and JP1/IM - View have been installed correctly.

KAVC4020-E
The login information file ((file-name)) is not found.

Automatic login failed because the specified login information file did not exist or could not be accessed.

(S)

Terminates JP1/AJS3 Console View.

(O)

Check that the specified login information file is stored in the directory listed below. Also check whether the user who started JP1/AJS3 Console View had the authority to read the login information file.

JP1/AJS3 - View-installation-folder\conf\

KAVC4021-E
Specify the value of the login information ((keyword)) in the login information file ((file-name)).

Automatic login failed because no value is specified for keyword in the login information file. This message does not appear unless a value is specified for the password.

(S)

Cancels automatic login, and displays the Login screen. Even if the password is specified, the password does not appear in the Login screen unless both user name and host name are specified.

(O)

In the Login screen, a blank field appears for a value of keyword that is not specified in the login information file. Enter a proper value in the blank field, and then log in.

Also check the contents of the login information file, referring to ajscon in 3. Commands Used for Special Operation in the manual Job Management Partner 1/Automatic Job Management System 3 Command Reference 2.

KAVC4022-E
The keyword ((keyword)) in the login information file ((file-name)) is not specified.

Automatic login failed because keyword is not specified in the login information file. The probable causes are:

The keyword indicated in keyword has not been set.

Spaces or tabs precede or follow the keyword indicated in keyword.

(S)

Cancels automatic login, and displays the Login screen. Even if the password is specified, the password does not appear in the Login screen unless both user name and host name are specified.

(O)

In the Login screen, the blank field for the keyword that is not specified in the login information file. Enter the keyword in the blank field, and then log in.

Also check the contents of the login information file, referring to ajscon in 3. Commands Used for Special Operation in the manual Job Management Partner 1/Automatic Job Management System 3 Command Reference 2.

KAVC4027-E
An attempt to read the product information failed. (Detailed information: function-name, return-code)

An attempt to read the product information failed.

(S)

Cancels processing.

(O)

If the system time has been changed to a time earlier than the time at which the product was installed, return the system time to the original setting, and then retry the operation.

For any other cases, perform an overwrite installation and then retry the operation.

If this message appears again after the overwrite installation, uninstall the product, re-install it, and then retry the operation.

KAVC4101-I
"(window-name)" was opened.

The message indicates that window-name was opened.

(S)

Outputs, to the log, the information that window-name was opened.

KAVC4102-I
"(window-name)" was closed.

The message indicates that window-name was closed.

(S)

Outputs, to the log, the information that window-name was closed.

KAVC4103-I
"(menu-name)" was selected.

The message indicates that menu-name was selected.

(S)

Outputs, to the log, the information that menu-name was selected.

KAVC4104-W
(keyword) has been set to an invalid value ((value)).

An invalid value is specified in keyword in the setting file.

(S)

Continues processing with the default values.

(O)

Check whether the correct value is specified for keyword.

KAVC4106-W
There is an ineffective parameter. [(invalid-parameter)]

An invalid parameter was specified in the ajscon command.

(S)

Continues processing, ignoring the invalid parameter.

(O)

Check the command line parameters for errors.

KAVC4107-I
JP1/AJS3 Console View was started. (Version: (version), OS user name: (OS-user-name))

This message indicates that JP1/AJS3 Console View started.

(S)

Outputs, to the log, the information that JP1/AJS3 Console View started.

KAVC4108-I
JP1/AJS3 Console View was stopped.

This message indicates that JP1/AJS3 Console View ended.

(S)

Outputs, to the log, the information that JP1/AJS3 Console View started.

KAVC4109-I
"(dialog-name)" dialog box was opened.

This message indicates that the dialog box shown in dialog-name opened.

(S)

Outputs, to the log, the information that the dialog box shown in dialog-name opened.

KAVC4110-I
"(dialog-name)" dialog box was closed.

This message indicates that the dialog box shown in dialog-name closed.

(S)

Outputs, to the log, the information that the dialog box shown in dialog-name closed.

KAVC4111-I
The "(button-name)" button was chosen in the "(dialog-name)" dialog box.

This message indicates that the button shown in button-name was clicked in the dialog box shown in dialog-name.

(S)

Outputs, to the log, the information that the button shown in button-name was clicked in the dialog box shown in dialog-name.

KAVC4112-I
Now communicating. Please wait.

This message indicates the wait for communication with JP1/AJS3 Console Manager.

(S)

Informs that the specified operation cannot be processed at once because of the wait for communication with JP1/AJS3 Console Manager. When the system becomes able to process the specified operation, it automatically closes the message box and continues processing.

(O)

To cancel the operation, click the Cancel button.

KAVC4113-I
"(menu-name)" was checked.

This message indicates that the menu was selected.

(S)

Outputs, to the log, the information that the menu is selected.

KAVC4114-I
The check of "(menu-name)" was released.

This message indicates that the menu selection was canceled.

(S)

Outputs, to the log, the information that the selection of the menu was canceled.

KAVC4115-I
An error occurred, so an operation was not processed.

This message indicates that the operation that was attempted before the message appears was skipped due to an error.

(S)

Informs that the operation attempted before this message appears has been skipped due to an error. After sending this information, the system displays information defined in JP1/AJS3 Console Manager.

(O)

If this message appears while you are updating definition information, determine the updated part of the information based on the definition information currently displayed in the window. If this message appears while you are performing some other operation, re-execute, skipped the operation as required.

If this message appears immediately after you choose Yes in a KAVCnnnn-Q message which requires the user's confirmation, an error message indicating the cause of the error may not appear. To determine the cause of the error, see error messages in the JP1/AJS3 Console View log file (ajs2coview#nnnn_{1|2}.log^#1) that were output at and after the time when the KAVCnnnn-Q message was displayed.

#1

#nnnn_ is not displayed when a single unit of JP1/AJS3 Console View is running. If more than one unit are running, any number from 0001 to 9999 is assigned to nnn.

KAVC4116-I
The connection was severed, so an operation was not processed.

This message indicates that the operation that was attempted before the message appeared was skipped because disconnection from JP1/AJS3 Console Manager was detected during processing.

(S)

Reports that the operation that was attempted before this message was not processed because disconnection from JP1/AJS3 Console Manager was detected. Unless automatic reconnection is prohibited, the system reconnects to JP1/AJS3 Console Manager and displays information defined in the currently active JP1/AJS3 Console Manager.

The system, however, does not reconnect to JP1/AJS3 Console Manager if it detects disconnection during mode change or reconnection.

(O)

If this message appears while you are updating definition information, determine the updated part of the information based on the definition information currently displayed in the window.

If the message The connection was severed appears on the status bar in the Scope window, you can resume the connection by choosing File and then Reconnect in the Main Scope window.

KAVC4117-W
An attempt to read the setting file ((file-name)) failed. [(maintenance-information)]

This message indicates that the setting file could not be read.

(S)

Outputs, to the log, the information that the setting file could not be read.

Continues processing with assumed defaults.

(O)

Check whether the OS user who started JP1/AJS3 Console View has the authority to read the setting file.

KAVC4118-W
(keyword) could not be updated.

This message indicates that information such as the window size that JP1/AJS3 Console View automatically saved could not be updated.

(S)

Outputs, to the log, the information that data (such as the window size that JP1/AJS3 Console View automatically saved) could not be updated.

(O)

Check whether permissions for files under the folder for storing settings files have been changed illegally. The locations of the folders for storing settings files are as follows:

In Windows 7, Windows Server 2008, and Windows Vista:

%ALLUSERSPROFILE%\Hitachi\JP1\JP1_DEFAULT\JP1AJS2V\conf

(The default for %ALLUSERSPROFILE% is system-drive\ProgramData.)

In Windows Server 2003 and Windows XP Professional:

JP1/AJS3 - View-installation-folder\conf

KAVC4119-W
The communication options could not be acquired. [(maintenance-information)]

This message indicates that the communication option for JP1/AJS3 Console View could not be obtained.

(S)

Outputs, to the log, the information that the communication option could not be obtained.

Continues processing with assumed defaults.

(O)

Check whether the OS user who started JP1/AJS3 Console View has the authority to read ajscon.conf.

KAVC4220-I
The connection destination was reconnected, so all the Detail Information dialog boxes were closed.

This message indicates that JP1/AJS3 Console Manager was disconnected, and then reconnected. It also indicates that all the displayed Detailed Information dialog boxes were closed due to inconsistency between the definition information when the connection was severed and that when the reconnection was performed.

(S)

Reports that the system disconnected JP1/AJS3 Console Manager, then reconnected it. It also informs that all the displayed Detailed Information dialog boxes were closed because the definition information when the connection was severed may be inconsistent with the definition information when the reconnection was performed.

(O)

Reopen the Detailed Information dialog box.

KAVC4221-W
The background image file ((file-name)) cannot be accessed.

This message indicates that the background image cannot be displayed because the background image file could not be read.

(S)

Outputs, to the log, the information that the background image in file-name cannot be displayed in the map area.

(O)

Check whether file-name exists and what the required access permission is. If no parent directory exists for the background image file, create a directory to store that file.

KAVC4222-I
The business scope to be displayed is already minimized.

This message indicates that the business scope to be displayed was already shown in another Scope window. An attempt to make that window come to the front failed because it had already been minimized into an icon.

(S)

Reports that the Business Scope window could not come to the front because it had already been minimized into an icon.

(O)

Manually resize the Business Scope window that has been minimized into an icon.

KAVC4223-I
The ((operation-name)) is performing. Please wait.

This message indicates that the system is waiting for the completion of an operation specified on JP1/AJS3 Console Agent (this message box cannot be closed).

(S)

Reports that the system is waiting for the completion of an operation specified on JP1/AJS3 Console Agent. After the operation is completed on JP1/AJS3 Console Agent, the system closes the message box automatically.

KAVC4224-I
The operation result is unknown because the connection with the connection destination was severed while performing the operation.

This message indicates that the system displayed the KAVC4223-I message and waited for the completion of an operation specified on JP1/AJS3 Console Agent, but whether the specified operation was performed successfully is unknown because the connection destination was disconnected while the operation was being performed.

(S)

Reports that whether the specified operation was performed successfully is unknown because the connection destination was disconnected while the system was waiting for the completion of the operation.

(O)

By checking the status of the monitored object displayed after reconnection, determine whether the operation was performed.

KAVC4232-W
The icon image file ((file-name)) cannot be accessed.

This message indicates that the specified icon image cannot be displayed because the icon image file could not be read.

(S)

Outputs, to the log, the information that the system displayed the icon based on the default icon image because it could not display the specified icon image.

(O)

Check whether file-name exists and what the required access permission is. If no parent directory exists for the icon image file, create a directory to store that file.

KAVC4233-I
The background cannot be displayed because the background image file ((file-name)) cannot be accessed.

This message indicates that the background is not displayed because the background image file could not be accessed when the Preview button was clicked in the Background Settings dialog box.

(S)

Does not display the background in the map area even if the background image was displayed before the Preview button was clicked.

(O)

Check whether file-name exists and what the required access permission is. If no parent directory exists for the background image file, create a directory to store that file.

KAVC4234-I
The business scope ((business-scope-name)) was opened.

This message indicates that the business scope shown in the Scope window was changed.

(S)

Outputs, to the log, the information that the system changed the business scope shown on the Scope window.

KAVC4302-Q
Are you sure you want to log out?

This message asks the user whether to terminate JP1/AJS3 Console View.

(S)

Waits for the user's response.

(O)

Click the Yes button to terminate, or the No button to cancel.

KAVC4303-Q
Are you sure you want to delete the (name)?

This message asks the user whether to delete the object.

(S)

Waits for the user's response.

(O)

Click the Yes button to delete or the No button to cancel.

KAVC4304-Q
Are you sure you want to delete the selected (number) objects?

This message asks the user whether to delete the objects.

(S)

Waits for the user's response.

(O)

Click the Yes button to delete, or the No button to cancel.

KAVC4305-Q
The execution ID is unknown. Are you sure you want to start JP1/AJS3 - View?

The user attempted to open the Jobnet Monitor window by double-clicking or clicking the Open Window button in the Detailed Information dialog box. This message asks the user whether to open the JP1/AJS3 - View window instead of the Jobnet Monitor window because the execution ID is unknown.

(S)

Waits for the user's response.

(O)

Click the Yes button to open the JP1/AJS3 - View window or the No button to cancel.

KAVC4306-Q
The specified color ((created-color)) is in use. Are you sure you want to delete it?

The user attempted to delete a user-created color in the Select Color dialog box, but that color is assigned as the status indication color. This message asks the user whether to delete that color.

(S)

Waits for the user's response.

(O)

Click the Yes button to delete the displayed color or the No button to cancel. Clicking the Yes button sets the default status indication color.

KAVC4307-Q
Are you sure you want to perform the (operation-name) on (name)?

This message asks the user whether to perform the operation indicated in the message on the specified monitored object.

(S)

Waits for the user's response.

(O)

Click the Yes button to perform the operation or the No button to cancel.

KAVC4308-Q
The background image file ((file-name)) cannot be accessed. Are you sure you want to define the specified file name for the background image file?

The user attempted to set the background, but the background image file cannot be accessed. This message asks the user whether to define the specified file name for the background image file.

(S)

Waits for the user's response.

(O)

Choose Yes to validate the setting even if the background image is not displayed, the No button to cancel.

KAVC4309-Q
The icon image file ((file-name)) cannot be accessed. Are you sure you want to define the specified file name for the icon image file?

The user attempted to set an icon image, but the icon image file cannot be accessed. This message asks the user whether to define the specified icon file name.

(S)

Waits for the user's response.

(O)

Choose Yes to validate the setting even if the specified icon image is not displayed, or the No button to cancel..

KAVC4501-E
Cannot connect to the connection destination host or JP1/AJS3 Console Manager service on the connection destination host.
Detailed information [(connection-destination-port-number): (connection-destination-IP-address)]

The system cannot connect to the connection destination host or the JP1/AJS3 Console Manager service on the connection destination host. The possible causes are as follows:

The JP1/AJS3 Console Manager service on the connection destination host is inactive.

The definition of the port number (jp1ajs2cm) does not match that on the connection destination.

The connection destination host is inactive.

The network connection to the connection destination host is not available.

If a firewall is provided between the connection source and destination, the firewall has not been set up to pass communications between the source and destination.

(S)

Cancels processing.

(O)

Remove the cause of the error, and then re-execute the operation.

In some cases, the system cannot connect to the connection destination when the server is busy. To connect to the target JP1/AJS3 Console Manager from more than one unit of JP1/AJS3 Console View, specify the number of retries (the default is 1).

For details on how to specify the number of retries, see 14. Customizing JP1/AJS3 Console Screens in the Job Management Partner 1/Automatic Job Management System 3 Operator's Guide.

KAVC4502-E
The data to the connection destination could not be sent or received.

Data could not be sent to or received from JP1/AJS3 Console Manager.

(S)

Cancels processing.

(O)

A temporary network problem may have occurred. If this message appears during update of definition information, check whether the definition information has been updated. If it has not been updated successfully, re-execute the same operation.

If this message appears frequently, an error may have occurred in JP1/AJS3 Console Manager.

Use log information such as the Windows event log or the syslog on the host for JP1/AJS3 Console Manager to examine the error. Then, correct the cause of the error according to the results of the search.

KAVC4503-E
Processing was interrupted because an error was detected in the received data. Confirm that the port number (jp1ajs2cm) is the same at the connection destination.
Detailed information [(maintenance-information)]

The system detected invalid data related to the protocol in received data.

(S)

Cancels processing.

(O)

Check whether the definition of the port number (jp1ajs2cm) matches that on the connection destination.

KAVC4504-E
The host name is specified incorrectly.

The host name specified in connected-host-name can not be resolved.

(S)

Cancels processing.

(O)

Enter the correct host name or IP address.

KAVC4505-E
Cannot connect because the number of connections exceeded the maximum.

No more connections can be made because the number of connections to JP1/AJS3 Console Manager exceeded the maximum.

(S)

Cancels processing.

(O)

Wait until the number of connections drops below the maximum, and then reconnect.

You can change the maximum number of connections in the environment settings for JP1/AJS3 Console Manager. Change the value of the MAXSESSION environment setting parameter as required.

KAVC4506-E
A timeout occurred while waiting for the response from the connection destination.

A timeout error occurred while the system was waiting for a response from JP1/AJS3 Console Manager.

(S)

Cancels processing.

(O)

Check whether JP1/AJS3 Console Manager is normal. In some cases, JP1/AJS3 Console Manager takes a lot of time to perform processing. When you update definition information, check whether the update was successful. The timeout value can be changed. For details on how to specify the timeout value, see 14. Customizing JP1/AJS3 Console Screens in the Job Management Partner 1/Automatic Job Management System 3 Operator's Guide.

KAVC4507-E
Communication access was denied at the connection destination.

The connection destination cannot be connected because the JP1/Base settings on the connection destination disable connection to the destination with the host name or IP address specified on the connection host.

(S)

Cancels processing.

(O)

Check whether the JP1/Base settings on the connection destination specify the IP binding method on the receiving side for physical hosts. If the IP binding method is set, specify the IP address assigned to the host name of the connection destination or specify a host name that can be associated with the IP address.

KAVC4511-E
The user name or password is invalid.

The user cannot log in because the JP1 user name or password is incorrect.

(S)

Cancels processing.

(O)

Log in by entering the JP1 user name and password registered in the Access Control server at the connection destination.

KAVC4512-E
The Access Control Server at the connection destination could not be connected.

User authentication is impossible because the Access Control server cannot be connected at the connection destination. The user can neither log in nor connect. The possible causes are as follows:

An incorrect host name of the Access Control server is specified in the JP1/Base settings at the connection destination.

The Access Control server specified at the connection destination is inactive.

(S)

Cancels processing.

(O)

Correct the cause of the error. Then log on and choose File and then Reconnect.

If an authentication server is specified as the local host in UNIX, you must set up JP1/Base to be started as an authentication server. For details about how to set up this option, see the explanation of the authentication server in the Job Management Partner 1/Base User's Guide.

KAVC4513-E
The user could not be authenticated at the connection destination.
Detailed information [(maintenance-information)]

The user could not be authenticated at the connection destination.

(S)

Cancels processing.

(O)

Collect the following data, and then contact the system administrator:

A hardcopy of the window

JP1/AJS3 Console View log information

JP1/AJS3 Console Manager log information

Log information about JP1/Base at the connection destination (If the Access Control server is on another host, also collect log information about JP1/Base on that Access Control server.)

For details on how to collect the logs, see 1.3 Data to be collected when a problem occurs in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting and 1.4 Collecting data for troubleshooting in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.

For details on how to collect the log of JP1/Base, see the Job Management Partner 1/Base User's Guide.

KAVC4514-E
You cannot use the current login information to log in.

If the user started JP1/AJS3 Console View in JP1/IM - View, the user cannot log in with the current login information because the authentication bloc at the connection destination is different or because the Access Control server restarted before JP1/AJS3 Console View started.

If the user started JP1/AJS3 Console View in the usual way, the user cannot log in with the current login information because the Access Control server restarted during login processing to JP1/AJS3 Console View.

(S)

Cancels processing.

(O)

Log in again.

KAVC4515-E
You cannot use the current login information to connect. Log in again.

The current login information is invalid and the user cannot connect to the connection destination because the Access Control server restarted, or because the user logged out from the View in which the user started the current JP1/AJS3 Console View.

(S)

Cancels processing and displays the Login screen.

(O)

Log in again.

KAVC4516-E
You cannot make a connection because another user is currently changing the definition.

The user cannot connect because the same root business scope is being defined in another JP1/AJS3 Console View.

(S)

Cancels processing.

(O)

Wait until another JP1/AJS3 Console View terminates the definition mode, and then log in or connect again.

KAVC4520-E
The information about the connection destination ((information)) cannot be obtained.

The system cannot connect to the connection destination because it cannot obtain information about JP1/AJS3 Console Manager at the connection destination.

(S)

Cancels processing and severs the connection.

(O)

Collect the following data, and then contact the system administrator:

A hardcopy of the window

JP1/AJS3 Console View log information

JP1/AJS3 Console Manager log information

For details on how to collect the logs, see 1.3 Data to be collected when a problem occurs in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting and 1.4 Collecting data for troubleshooting in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.

KAVC4521-E
The character code-set for the connection destination (character-set-name) is not supported.

The system cannot perform processing using the character set specified at the connection destination.

(S)

Cancels processing and severs the connection.

(O)

Check the JP1/AJS3 Console Manager settings for errors.

KAVC4522-E
The content of the connection destination information ((contents-of-information)) has been changed. Please restart JP1/AJS3 Console View.

The system cannot continue processing because the version or character set of the connection destination was changed.

(S)

Cancels processing and severs the connection.

(O)

Log out from JP1/AJS3 Console View, and then start it again.

KAVC4523-E
Processing failed because the received data was invalid.

The system cannot process the data sent from JP1/AJS3 Console Manager because it is invalid.

(S)

Cancels processing.

(O)

Collect the following data, and then contact the system administrator:

A hardcopy of the window

JP1/AJS3 Console View log information

JP1/AJS3 Console Manager log information

For details on how to collect the logs, see 1.3 Data to be collected when a problem occurs in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting and 1.4 Collecting data for troubleshooting in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.

KAVC4524-W
The login information could not be released. ((maintenance-information))

This message indicates that the system could not release login information.

(S)

Outputs, to the log, the information that the system could not release the login information.

(O)

No action is required because this message is internal log information.

KAVC4525-E
The information about the connection destination ((information)) is invalid.

The system cannot perform processing because information about the connection destination is invalid.

(S)

Cancels processing.

(O)

Collect the following data, and then contact the system administrator:

A hardcopy of the window

JP1/AJS3 Console View log information

JP1/AJS3 Console Manager log information

For details on how to collect the logs, see 1.3 Data to be collected when a problem occurs in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting and 1.4 Collecting data for troubleshooting in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.

KAVC4526-E
Inaccurate data was detected. Check the setup of the character code at the connection destination. ((character-set-name))

The system detected invalid data that cannot be displayed in JP1/AJS3 Console View because of an invalid character set.

(S)

Cancels processing.

(O)

Log out from JP1/AJS3 Console View. Then change the character set settings in a running JP1/AJS3 Console Manager at the connection destination, and check whether the data before you made changes still remains.

Even if this message is not displayed, take the above actions if data displayed by JP1/AJS3 Console View contains character errors.

KAVC4527-E
An error occurred in session processing.
Detailed information [(maintenance-information)]

Data sent from JP1/AJS3 Console View contains errors.

(S)

Cancels processing.

(O)

Collect the following data, and then contact the system administrator:

A hardcopy of the window

JP1/AJS3 Console View log information

JP1/AJS3 Console Manager log information

For details on how to collect the logs, see 1.3 Data to be collected when a problem occurs in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting and 1.4 Collecting data for troubleshooting in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.

KAVC4530-Q
The connection with the connection destination was severed. Do you want to re-connect?

This message asks the user whether to reconnect to a disconnected JP1/AJS3 Console Manager. JP1/AJS3 Console View automatically reconnects to a disconnected JP1/AJS3 Console Manager without displaying this message. JP1/AJS3 Console View, however, displays this message if it has been customized in order not to reconnect automatically to JP1/AJS3 Console Manager.

(S)

Waits for the user response.

(O)

Click the Yes button to reconnect or the No button to cancel.

KAVC4537-I
ENUM_RECV (received-information)

This message indicates that data from JP1/AJS3 Console Manager was received.

(S)

Outputs, to the log, the information that data from JP1/AJS3 Console Manager was received.

KAVC4538-I
REQ_EXECCOMMAND: (maintenance-information)

This message indicates that JP1/AJS3 Console Manager was requested to perform an operation.

(S)

Outputs, to the log, the information that the system requested JP1/AJS3 Console Manager to perform an operation.

KAVC4539-I
NOTIFY_EXECCOMMAND: (maintenance-information)

This message indicates that the system was informed of operation completion.

(S)

Outputs, to the log, the information that the operation has completed.

KAVC4540-I
CONNECT (connection-information)

This message indicates that JP1/AJS3 Console Manager was connected successfully.

(S)

Outputs, to the log, the information that the connection was made successfully as shown in connection-information.

KAVC4541-E
CONNECT_ERR ((maintenance-information)) [(connection-information)]

This message indicates that an error occurred when an attempt was made to connect, or that a connection was severed.

(S)

Outputs, to the log, the information that the connection failed or was severed, and continues processing. If the connection failed, the system retries the connection as specified in the setting.

(O)

No action is required because this message is internal log information.

KAVC4542-I
CLOSE (connection-information)

This message indicates that the connection to JP1/AJS3 Console Manager was closed.

(S)

Outputs, to the log, the information that the connection shown in connection-information was closed.

KAVC4543-W
CLOSE_ERR ((maintenance-information)) [(connection-information)]

This message indicates that the connection to JP1/AJS3 Console Manager could not be closed.

(S)

Outputs, to the log, the information that the connection shown in connection-information could not be closed, and continues processing.

(O)

No action is required because this message is internal log information.

KAVC4544-W
WARNING (maintenance-information)

This message indicates that an error that allows further processing occurred.

(S)

Outputs, to the log, the information hat an error that allows further processing occurred.

(O)

No action is required because this message is internal log information.

KAVC4545-I
NOTIFY_MONSTAT: (maintenance-information)

This message indicates that the monitoring status of JP1/AJS3 Console Manager changed.

(S)

Outputs, to the log, the information that the monitoring status of JP1/AJS3 Console Manager changed.

KAVC4546-W
INVALID_DATA (received-data)

If data received from JP1/AJS3 Console Manager is invalid, this message indicates that data was output to a log file.

(S)

Outputs the message to the log for examination when a failure occurs, and continues processing.

(O)

No action is required because this message is internal log information.

KAVC4547-I
SEND (maintenance-information)

This message indicates that the system sent data to JP1/AJS3 Console Manager.

(S)

Outputs, to the log, the information that the system sent data to JP1/AJS3 Console Manager.

KAVC4548-I
SDUMP (sent-data)

This message indicates that the data was transmitted to JP1/AJS3 Console Manager.

(S)

Outputs the transmitted data to the log.

KAVC4549-I
RECV (maintenance-information)

This message indicates that the system received data from JP1/AJS3 Console Manager.

(S)

Outputs, to the log, the information that the system received data from JP1/AJS3 Console Manager.

KAVC4550-I
RDUMP (received-data)

This message indicates that the data was received from JP1/AJS3 Console Manager.

(S)

Outputs received data to the log.

KAVC4551-I
NET_OPTION: (communication-option)

This message indicates the value of the communication option specified in JP1/AJS3 Console View.

(S)

Outputs, to the log, the value of the communication option specified in JP1/AJS3 Console View.

KAVC4552-E
SEND_ERR ((maintenance-information))

This message indicates that the system could not send data to JP1/AJS3 Console Manager.

(S)

Outputs, to the log, the information that the system could not send data to JP1/AJS3 Console Manager, and continues processing.

(O)

No action is required because this message is internal log information.

KAVC4553-I
NOTIFY_CHGSTAT: ((maintenance-information))

This message indicates that the system received a status change notification.

(S)

Outputs, to the log, the information that the status of the object changed.

KAVC4554-I
REQ_START (maintenance-information)

This message indicates that the system started sending a request to JP1/AJS3 Console Manager.

(S)

Outputs, to the log, the information that the system started sending a request to JP1/AJS3 Console Manager.

KAVC4555-I
REQ_END (maintenance-information)

This message indicates that the request from JP1/AJS3 Console View to JP1/AJS3 Console Manager was processed normally.

(S)

Outputs to the log that a normal response was returned from JP1/AJS3 Console Manager and that the request sent from JP1/AJS3 Console View to JP1/AJS3 Console Manager was processed normally.

KAVC4556-I
ERR_SDUMP (sent-data)

If an error occurs during the transmission of a request from JP1/AJS3 Console View to JP1/AJS3 Console Manager, this message indicates the data sent from JP1/AJS3 Console View.

(S)

Outputs to the log the data sent from JP1/AJS3 Console View when an error occurred during the transmission of a request from JP1/AJS3 Console View to JP1/AJS3 Console Manager.

KAVC4557-I
MANAGER_ERR (maintenance-information)

This message indicates that JP1/AJS3 Console Manager sent an error response during the transmission of a request from JP1/AJS3 Console View to JP1/AJS3 Console Manager.

(S)

Outputs, to the log, the information that JP1/AJS3 Console Manager sent an error response during the transmission of a request from JP1/AJS3 Console View to JP1/AJS3 Console Manager.

KAVC4558-W
LOGOUT_ERR (maintenance-information)

This message indicates that an error occurred during logout from JP1/AJS3 Console View.

(S)

Outputs, to the log, the information that an error occurred during logout from JP1/AJS3 Console View, and continues processing.

(O)

No action is required because this message is internal log information.

KAVC4559-I
REQ_ERR (maintenance-information)

This message indicates that an error occurred during the transmission of a request from JP1/AJS3 Console View to JP1/AJS3 Console Manager.

(S)

Outputs, to the log, the information that an error occurred during the transmission of a request from JP1/AJS3 Console View to JP1/AJS3 Console Manager.

KAVC4560-E
An error occurred at the connection destination.
Detailed information [(maintenance-information)]

An error occurred in JP1/AJS3 Console Manager at the connection destination.

(S)

Cancels processing.

(O)

Use log information such as the Windows event log or the syslog on the host for JP1/AJS3 Console Manager to examine the error. Then, correct the cause of the error according to the check results.

KAVC4561-E
Memory became insufficient at the connection destination.

Memory became insufficient in JP1/AJS3 Console Manager at the connection destination.

(S)

Cancels processing.

(O)

Check the following to see whether the status of JP1/AJS3 Console Manager at the connection destination can cause insufficient memory:

In UNIX, see Release Notes, and make sure that the value of the kernel parameter for memory is greater than the estimated value.

Check the status of the process that was running when the error occurred to make sure that the amount of memory available is greater than the estimated value.

KAVC4562-E
There is insufficient space for the file at the connection destination.

The file system or device in JP1/AJS3 Console Manager at the connection destination does not have sufficient free space for writing a file.

(S)

Cancels processing.

(O)

Delete unnecessary files at the connection destination to increase free space.

KAVC4563-E
Resources became insufficient at the connection destination.

A resource became insufficient in JP1/AJS3 Console Manager at the connection destination.

(S)

Cancels processing.

(O)

Use log information such as the Windows event log or the syslog on the host for JP1/AJS3 Console Manager to examine the error. Then, correct the cause of the error according to the check results.

KAVC4564-E
JP1/AJS3 Console Manager service needs the required permission.

The JP1/AJS3 Console Manager service at the connection destination cannot perform processing because it does not have the required permission.

(S)

Cancels processing.

(O)

Check the permission that the JP1/AJS3 Console Manager service at the connection destination has.

In Windows:
Check that the account of the JP1/AJS3 Console Manager service is a local system account.
If the account is a user account, see 4.2.3 Changing the JP1/AJS3 service settings (Windows only) in the Job Management Partner 1/Automatic Job Management System 3 System Design (Configuration) Guide and check whether the specified user has the privileges required for the service.

In UNIX:
Check that a superuser executes ajscminetd.

KAVC4565-E
Defined data is corrupted at the connection destination.

The system cannot perform processing because the defined data at the connection destination has been damaged.

(S)

Cancels processing.

(O)

Stop the JP1/AJS3 Console Manager service, collect the following data, and then contact the system administrator.

JP1/AJS3 Console View log information

JP1/AJS3 Console Manager log information

Data directory

For details on how to collect the logs, see 1.3 Data to be collected when a problem occurs in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting and 1.4 Collecting data for troubleshooting in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.

After collecting the data, delete the data directory and restore it from the backup.

KAVC4566-E
An error occurred in JP1/Base at the connection destination.
Detailed information [(maintenance-information)]

The system cannot perform processing because an error occurred in JP1/Base at the connection destination.

(S)

Cancels processing.

(O)

Use log information such as the Windows event log or the syslog on the host for JP1/AJS3 Console Manager to examine the error. Then, correct the cause of the error according to the check results.

KAVC4567-E
A configuration definition parameter that must be defined does not exist or is specified incorrectly at the connection destination.

The system cannot perform processing because the environment settings for JP1/AJS3 Console Manager at the connection destination contain an error. The probable causes are:

JP1/AJS3 Console Manager has not been set up at the connection destination.

The directory specified in the DATADIRECTORY environment setting parameter does not exist.

If JP1/AJS3 Console Manager is running in a cluster configuration, a failover is being performed.

(S)

Cancels processing.

(O)

Correct the cause of the error, and then log on again.

If a failover is being performed in a cluster configuration, wait until the failover finishes, and then log on again and choose File and then Reconnect.

If you changed an environment setting parameter for JP1/AJS3 Console Manager, you must restart the JP1/AJS3 Console Manager service to validate the changed parameter.

If you uninstalled and then re-installed JP1/Base after setting up JP1/AJS3 Console Manager, you must set up JP1/AJS3 Console Manager again.

KAVC4568-I
InterProcess : (connection-information)

This message indicates that inter-process communication is being performed.

(S)

Outputs, to the log, the information that inter-process communication is being performed.

KAVC4569-W
InterProcess : (maintenance-information)

This message indicates that an error that allows processing to continue occurred during inter-process communication.

(S)

Outputs, to the log, the information that an error that allows processing to continue occurred during inter-process communication.

(O)

No action is required because this message is internal log information.

KAVC4570-E
InterProcess : (maintenance-information)

This message indicates that an error occurred during inter-process communication.

(S)

Outputs, to the log, the information that an error occurred during inter-process communication.

(O)

No action is required because this message is internal log information.

KAVC4601-E
Specify (field-name).

Field-name is missing.

(S)

Cancels processing.

(O)

Enter a value in field-name, and then re-execute the operation.

KAVC4602-E
The Define Details dialog box cannot be displayed because the selected object is unknown.

The Define Details dialog box cannot be displayed because the specified object was added using a more recent version.

(S)

Cancels processing.

(O)

To display the Define Details dialog box, upgrade the version of JP1/AJS3 - View to the same version as JP1/AJS3 - Manager being used at the connection destination.

KAVC4603-E
The Definition mode is unavailable because the object is currently being monitored.

You cannot set the object in the Definition mode because some other software or hardware is now monitoring it.

(S)

Cancels processing (the object remains in the Monitoring mode).

(O)

Check that no other software or hardware is monitoring the object, and then set it in the Definition mode.

This message is also displayed when you attempt to set the object in the Definition mode while the ajscmprint command is being executed. Set the object in the Definition mode after execution of the ajscmprint command has finished.

KAVC4604-E
The Main Scope window cannot be displayed in front because it is minimized.

An attempt to make the Main Scope window come to the front failed because the window had been minimized into an icon.

(S)

Cancels processing.

(O)

Resize the Main Scope window manually.

KAVC4605-E
Select objects.

Operation is impossible because no object is selected.

(S)

Cancels processing.

(O)

Select a desired object in the map area, and then re-execute the operation.

KAVC4606-E
The Definition mode is unavailable because the monitoring status is not "Monitoring".

The user cannot activate the Definition mode because the monitoring status at the connection destination is not Monitoring status.

(S)

Cancels processing.

(O)

Wait until the monitoring status indication on the mode panel changes to Monitoring status, and then activate the Definition mode.

KAVC4607-E
The Monitoring mode is unavailable because the monitoring status is "Stopped Monitoring".

The user cannot activate the Monitoring mode because the monitoring status at the connection destination is not Stopped Monitoring.

(S)

Cancels processing.

(O)

Wait until the monitoring status indication on the mode panel changes to Stopped Monitoring, and then activate the Monitoring mode.

KAVC4608-E
An object that is cut or copied was not found.

The user cannot paste because no object has been cut or copied. If you delete a cut or copied object, you cannot cut or copy that object.

(S)

Cancels processing.

(O)

Cut or copy the object before pasting it.

KAVC4609-E
The setting could not be updated.

The system could not write to the JP1/AJS3 Console View settings file, so it cannot update the settings.

(S)

Cancels processing.

(O)

Make sure that permissions for files under the folder for storing settings files have not been changed illegally. The locations of the folders for storing settings files are as follows:

In Windows 7, Windows Server 2008 and Windows Vista:

%ALLUSERSPROFILE%\Hitachi\JP1\JP1_DEFAULT\JP1AJS2V\conf

(The default for %ALLUSERSPROFILE% is system-drive\ProgramData.)

In Windows Server 2003 and Windows XP Professional:

JP1/AJS3 - View-installation-folder\conf

KAVC4610-E
The object could not be pasted because the maximum number of definitions was exceeded.

The user cannot paste the object because the number of definitions exceeds the maximum.

(S)

Performs pasting until the number of definitions reaches the maximum.

(O)

Business scopes are also counted as definitions. Recheck the hierarchy, and cancel any group of unnecessary hierarchy levels with business scopes.

KAVC4611-E
Select one object.

Operation is impossible because no object or more than one object is selected.

(S)

Cancels processing.

(O)

Select one object in the map area, and then re-execute the operation.

KAVC4612-E
Select one (object-classification)

Operation is impossible because you have not selected an object that belongs to object-classification, or have selected more than one object that belongs to object-classification.

(S)

Cancels processing.

(O)

In the map area, select one object that belongs to the object classification applicable for operation, and then re-execute the operation.

KAVC4613-E
Jobnet Monitor could not be started because the execution ID is unknown.

The system cannot activate the Jobnet Monitor window because the execution ID is unknown.

(S)

Cancels processing.

(O)

As required, from the menu, choose View, JP1/AJS3 - View, and JP1/AJS3 - View Window to activate the JP1/AJS3 - View window.

KAVC4614-E
An upper-level business scope does not exist.

The user attempted to display an upper-level business scope while the root business scope was displayed.

(S)

Cancels processing.

(O)

Check the hierarchy level of the business scope currently displayed.

KAVC4615-E
An object with the same name already exists. Rename the object.

The user cannot define objects with the same name at the same hierarchy level.

(S)

Cancels processing.

(O)

Define the object with a different name.

KAVC4616-E
Enter the (value-1) - (value-2) for (field-name).

No value is specified in field-name, or an invalid value is specified in it.

(S)

Cancels processing.

(O)

Specify a value in the range of value-1 to value-2 in field-name.

KAVC4617-E
A maximum of 50 colors can be created.

The user can create up to 50 display colors.

(S)

Cancels processing.

(O)

Delete unnecessary display colors, and then create display colors.

KAVC4618-E
A color with the specified RGB element already exists, so you cannot specify the RGB element.

The user cannot create display colors that have the same RGB element values as those of the basic colors or existing user-created colors.

(S)

Cancels processing.

(O)

Create a color by specifying RGB element values different from those of existing display colors.

KAVC4619-E
A color with the same name already exists, so you cannot specify the name.

The user cannot create display colors with the same name as that of the basic colors or an existing user-created colors.

(S)

Cancels processing.

(O)

Create a color by specifying a name different from that of existing display color.

KAVC4620-E
Failed to start JP1/AJS3 - View.

The system could not start JP1/AJS3 - View.

(S)

Cancels processing.

(O)

Memory or free space on the disk may be insufficient. Terminate unnecessary applications, and then re-execute the operation.

If the error persists, the configuration of JP1/AJS3 - View may have been corrupted. Perform a repair installation.

KAVC4621-E
Select an item in the Available colors list.

The user has selected no display color from the Available colors list.

(S)

Cancels processing.

(O)

Select a display color from the Available colors list.

KAVC4622-E
An error occurred while displaying the message box.

An error occurred while the system was displaying a message box.

(S)

Outputs, to the log, the information that an error occurred while the system was displaying a message box.

(O)

Collect the following data, and then contact the system administrator:

JP1/AJS3 Console View log information

KAVC4623-E
The log could not be output. Detailed information ((maintenance-information))

The system could not output a log. The probable causes are:

You do not have access permission for files under the log folder.

The disk does not have sufficient free space.

The locations of the log folders are as follows:

In Windows 7, Windows Server 2008, and Windows Vista:

%ALLUSERSPROFILE%\Hitachi\JP1\JP1_DEFAULT\JP1AJS2V\log

(The default for %ALLUSERSPROFILE% is system-drive\ProgramData.)

In Windows Server 2003 and Windows XP Professional:

JP1/AJS3 - View-installation-folder\log

(S)

Cancels processing.

(O)

Correct the cause of the error.

If you cannot correct the error, the configuration of JP1/AJS3 - View may have been corrupted. Perform a repair installation.

KAVC4624-E
You cannot create an object because the maximum number of definitions was exceeded.

The user cannot create more objects because the number of definitions exceeded the maximum.

(S)

Cancels processing.

In Automatic Creation of Monitored Objects mode, continues the creation process until an error is detected.

(O)

Business scopes are also included in the number of definitions. Recheck the hierarchy and if there are unnecessary hierarchical levels, cancel grouping based on business scopes.

KAVC4626-E
The help is not installed.

The system cannot display help because it has not been installed.

(S)

Cancels processing.

(O)

To display help, install it.

KAVC4628-E
The help file is associated with the browser.

The system cannot display help because the help file is not associated with the browser.

(S)

Cancels processing.

(O)

Associate HTML files (with the extension .htm) with the Web browser.

KAVC4629-E
An attempt to display the help failed.

The system cannot display help.

(S)

Cancels processing.

(O)

The configuration of JP1/AJS3 - View may have been corrupted. Perform a repair installation.

KAVC4631-E
The specified operation was not performed because the connection was severed during processing.

The connection was severed while the system was displaying a confirmation message dialog box and a dialog box. As a result, the system did not perform any further update or operation on the AJS3 unit-monitored object.

(S)

Cancels processing.

(O)

Re-execute the update and the operation on the AJS3 unit-monitored object.

KAVC4632-E
The available file extensions are .jpg and .gif. Specify a valid file name.

A background image file must have the extension .jpg or .gif.

(S)

Cancels processing.

(O)

Specify a file with the extension .jpg or .gif.

KAVC4633-E
The available icon file extension is .gif. Specify a valid file name.

An icon image file must have the extension .gif.

(S)

Cancels processing.

(O)

Specify a file with the extension .gif.

KAVC4634-E
The (name) directory ((directory-name)) does not exist, or a file with the extension ((extension-name)) does not exist in the directory.

An attempt to display the File Selection dialog box failed because the directory with the name directory-name did not exist or because a file with the extension extension-name did not exist in that directory.

(S)

Cancels processing.

(O)

Check whether the directory-name directory exists. Also check whether a file with the extension extension-name exists in that directory.

Even if the user creates a directory or adds a file with the above-mentioned extension to the directory immediately after the above error message appeared, clicking the ... button also causes this message to appear again until the user displays the Define Details dialog box (or displays the Background Settings dialog box) in which the user has activated the File Selection dialog box.

To update information, close the Define Details dialog box (or the Background Settings dialog box), and then display the dialog box again. Then click the button.

KAVC4635-E
The automatically created monitored object information is not saved.

This message indicates that the system could not create a monitored object automatically because information about the automatically created monitored object was not stored.

(S)

Cancels processing.

(O)

Select the root jobnet to be monitored in the JP1/AJS3 - View window. Choose Options and then Save as Monitored Object. Then re-execute the operation.

When the character set is C for the JP1/AJS3 Console Manager to which JP1/AJS3 Console View has logged in, the user cannot create a root jobnet whose full unit name contains characters other than ASCII characters as an AJS3 unit-monitored object.

If this error message is displayed when the host name specified at login to JP1/AJS3 - View consists of characters other than ASCII characters, start JP1/AJS3 - View and specify an IP address as the name of the host to be connected. Then log in to JP1/AJS3 - Manager. After logging in, choose Options and then Save as Monitored Object.

KAVC4636-E
Refresh is not possible because the monitor status is not "Monitoring".

The system cannot update information because the monitoring status at the connection destination is not Monitoring status.

(S)

Cancels processing.

(O)

Wait until the monitoring status indication on the mode panel changes to Monitoring status, and then update information.

KAVC4637-E
The object could not be created because the maximum number of objects definable in the definition destination business scope is exceeded.

The user cannot create the object because the maximum number of objects that can be defined in the business scope at the definition destination has been exceeded.

(S)

Cancels processing.

In Automatic Creation of Monitored Objects mode, the system continues the creation process until an error is detected.

(O)

Increase the map size of the business scope at the definition destination, and then redefine the object.

KAVC4638-E
The business scope could not be created because the maximum number of business scope hierarchy levels is exceeded.

Business scopes can be nested up to three hierarchy levels. The user cannot create four or more hierarchy levels.

(S)

Cancels processing.

(O)

Create business scopes so that the maximum number of hierarchy levels for business scopes may not be exceeded.

KAVC4639-E
An object cannot be pasted because the maximum number of objects definable in the definition destination business scope is exceeded.

The user cannot paste the object because the maximum number of objects that can be created in the business scope at the pasting destination has been exceeded.

(S)

Continues the pasting process until an error is detected.

(O)

Increase the map size of the business scope at the pasting destination. Then copy or cut the object that you could not paste, and then paste it.

KAVC4640-E
A business scope cannot be pasted because the maximum number of business scope hierarchy levels is exceeded.

Business scopes can be nested up to three hierarchy levels. The user cannot create four or more hierarchy levels.

(S)

Continues the pasting process until an error is detected.

(O)

Paste business scopes so that the number of hierarchy levels for business scopes does not exceed the maximum.

KAVC4641-E
Moving is not possible because the cut business scope and paste destination business scope are the same.

The object does not move because the cutting business scope and the pasting business scope are the same.

(S)

Cancels processing.

(O)

Paste the object to a business scope different from the cutting business scope.

KAVC4642-E
A business scope cannot be moved to a lower hierarchy level.

The user cannot paste a cut business scope to a lower hierarchy level.

(S)

Continues the pasting process until an error is detected.

(O)

Paste the cut business scope to an upper hierarchy level or to another hierarchy level.

KAVC4643-E
The (operation-level) is not possible because the monitoring status is not "Monitoring".

The user cannot perform the operation because the monitoring status at the connection destination is not Monitoring status.

(S)

Cancels processing.

(O)

Re-execute the operation after the monitoring status indication on the mode panel changes to Monitoring status.

KAVC4644-E
The (operation-name) is not possible because the status has not been obtained.

The user cannot perform the operation because the status of the target object being monitored is Unknown or No status.

(S)

Cancels processing.

(O)

Re-execute the operation after the status of the target object is obtained correctly.

KAVC4645-E
The (operation-name) is not possible because the execution ID is unknown.

The system cannot perform the specified operation because the status of the target object being monitored for the operation is Not registered or Not scheduled.

(S)

Cancels processing.

(O)

Re-execute the operation after the status of the target object is obtained correctly and the status becomes something other than Not registered or Not scheduled.

KAVC4646-E
The operation failed.

The system could not perform the operation on the AJS3 unit-monitored object.

(S)

Displays the cause of the error in a dialog box.

(O)

Take actions according to the message shown in the Error details text area.

For a message beginning with KAVC, see the explanation of that message.

For a message beginning with KAVS, see 2.2 Messages beginning with KAVS (Messages about the scheduler).

(4) KAVC6001 to KAVC7000 (messages on unknown status or operation failures)

KAVC6101-E
An error occurred at the connection destination. Detailed information [(maintenance-information)]

The system cannot display the status because an error occurred in JP1/AJS3 Console Manager at the connection destination. Alternatively, the system could not perform the operation.

(S)

Sets Unknown as the status of the object and continues processing if the error occurred during status acquisition. If the error occurred during an operation, the system determines that the operation is an error and continues processing.

(O)

Use log information such as the Windows event log or the syslog on the host for JP1/AJS3 Console Manager to examine the error. Then, correct the cause of the error according to the result in the log.

KAVC6102-E
Memory became insufficient at the connection destination.

The system cannot display the status because memory became insufficient in JP1/AJS3 Console Manager at the connection destination. Alternatively, the system could not perform the operation.

(S)

Sets Unknown as the status of the object and continues processing if the error occurred during status acquisition. If the error occurred during an operation, the system determines that the operation is an error and continues processing.

(O)

Check whether the status of JP1/AJS3 Console Manager at the connection destination can cause insufficient memory.

KAVC6103-E
There is insufficient space for the file at the connection destination.

The file system or device in JP1/AJS3 Console Manager at the connection destination does not have sufficient free space for writing a file. Alternatively, the system could not perform the operation.

(S)

Sets Unknown as the status of the object and continues processing if the error occurred during status acquisition. If the error occurred during an operation, the system determines that the operation is an error and continues processing.

(O)

Delete unnecessary files in the connection destination to increase free space.

KAVC6104-E
Resources became insufficient at the connection destination.

The system cannot display the status because a resource became insufficient in JP1/AJS3 Console Manager at the connection destination. Alternatively, the system could not perform the operation.

(S)

Sets Unknown as the status of the object and continues processing if the error occurred during status acquisition. If the error occurred during an operation, the system determines that the operation is an error and continues processing.

(O)

Use log information such as the event log or the syslog in the host for JP1/AJS3 Console Manager to examine the error. Then correct the cause of the error according to the check results.

KAVC6111-E
The host name of the monitoring destination could not be resolved.

The system cannot display the status because JP1/AJS3 Console Manager at the connection destination cannot determine the host name specified in the monitored-host's name in the Define Details dialog box.

(S)

Sets Unknown as the status of the object and continues processing.

(O)

In the monitored-host's name in the Define Details dialog box, specify a host name that JP1/AJS3 Console Manager can determine. Alternatively, specify settings so that JP1/AJS3 Console Manager at the connection destination can determine the specified host name.

KAVC6112-E
Cannot connect to the monitoring destination.

The system cannot display the status because JP1/AJS3 Console Manager at the connection destination cannot connect to the monitored host or to the JP1/AJS3 Console Agent host on the monitored host. The probable causes are:

The JP1/AJS3 Console Agent service on the monitoring destination host has not started.

The definitions of the port number (jp1ajs2ca) do not match between the connection destination and the monitoring destination.

The host at the monitoring destination has not started.

The connection destination host and the monitoring destination host are in a state that prevents a network connection.

If a firewall is provided between the connection destination host and the monitoring destination host, it has not been set to allow the access.

(S)

Sets Unknown as the status of the object and continues processing.

(O)

Correct the cause of the error.

KAVC6113-E
A timeout occurred while waiting for the response from the monitoring destination.

The system cannot display the status because a timeout error occurred in JP1/AJS3 Console Manager at the connection destination that was waiting for a response from JP1/AJS3 Console Agent at the monitoring destination. Alternatively, the system could not perform the operation.

(S)

Sets Unknown as the status of the object and continues processing if the error occurred during status acquisition. If the error occurred during an operation, the system determines that the operation is an error and continues processing.

(O)

Check that JP1/AJS3 Console Agent on the monitoring destination host is normal. If the IPC_TIMEOUT environment setting parameter has been specified in the environment settings in JP1/AJS3 Console Manager at the connection destination, check also whether the timeout period is too short.

KAVC6114-E
The connection was reset at the monitoring destination.

The system cannot display the status because the connection between JP1/AJS3 Console Manager at the connection destination and JP1/AJS3 Console Agent at the monitoring destination was severed. Alternatively, the system could not perform the operation.

(S)

Sets Unknown as the status of the object and continues processing if the error occurred during status acquisition. If the error occurred during an operation, the system determines that the operation is an error and continues processing.

(O)

Check that JP1/AJS3 Console Agent on the monitoring destination host is normal. Check also whether a communication failure occurred between the connection destination and the monitoring destination.

KAVC6115-E
The data received from the monitoring destination is invalid.

The system cannot display the status because JP1/AJS3 Console Manager at the connection destination received invalid data from JP1/AJS3 Console Agent at the monitoring destination. Alternatively, the system could not perform the operation.

(S)

Sets Unknown as the status of the object and continues processing if the error occurred during status acquisition. If the error occurred during an operation, the system determines that the operation is an error and continues processing.

(O)

Check whether the definitions of the port number (jp1ajs2ca) match between the connection destination and the monitoring destination.

KAVC6116-E
The number of hosts to be monitored exceeded the maximum.

The system cannot display the status because the maximum number of hosts that can be monitored in the root business scope was exceeded.

(S)

Sets Unknown as the status of the object and continues processing.

(O)

If there are two or more objects to be monitored on the same host, specify the same name for Host name for each monitored object.

A maximum of 50 hosts can be monitored using a root business scope. To monitor more than 50 hosts, create another root business scope and define the monitored objects.

KAVC6201-E
An error occurred at the monitoring destination.
Detailed information [(maintenance-information)]

The system cannot display the status because an error occurred in JP1/AJS3 Console Agent at the monitoring destination. Alternatively, the system cannot perform the operation.

(S)

Sets Unknown as the status of the object and continues processing if the error occurred during status acquisition. If the error occurred during an operation, the system determines that the operation is an error and continues processing.

(O)

See log information such as the Windows event log or the syslog on the host for JP1/AJS3 Console Agent, and then take actions according to the JP1/AJS3 Console Agent message output.

If this message appears in the Error details text area for the KAVC4646-E message indicating an operation error, a process generated by the JP1/AJS3 Console Agent host or a running command may have been forced to terminate. Use JP1/AJS3 - View to check the results. If the operation has failed, re-execute it.

KAVC6202-E
Memory became insufficient at the monitoring destination.

The system cannot display the status because memory became insufficient in JP1/AJS3 Console Agent at the monitoring destination. Alternatively, the system cannot perform the operation.

(S)

Sets Unknown as the status of the object and continues processing if the error occurred during status acquisition. If the error occurred during an operation, the system determines that the operation is an error and continues processing.

(O)

Check the following to see whether the status of JP1/AJS3 Console Agent at the connection destination can cause insufficient memory:

In UNIX, see Release Notes, and make sure that the value of the kernel parameter for memory is greater than the estimated value.

Check the status of the process that was running when the error occurred to make sure that the amount of memory available is greater than the estimated value.

KAVC6203-E
There is insufficient space for the file at the monitoring destination.

The system cannot display the status because the file system or device in JP1/AJS3 Console Agent at the monitoring destination does not have sufficient free space for writing a file. Alternatively, the system cannot perform the operation.

(S)

Sets Unknown as the status of the object and continues processing if the error occurred during status acquisition. If the error occurred during an operation, the system determines that the operation is an error and continues processing.

(O)

Delete unnecessary files in the JP1/AJS3 Console Agent host at the monitoring destination to increase free space.

KAVC6204-E
Resources became insufficient at the monitoring destination.

The system cannot display the status because a resource became insufficient in JP1/AJS3 Console Agent at the monitoring destination. Alternatively, the system cannot perform the operation.

(S)

Sets Unknown as the status of the object and continues processing if the error occurred during status acquisition. If the error occurred during an operation, the system determines that the operation is an error and continues processing.

(O)

Use log information such as the Windows event log or the syslog in the host for JP1/AJS3 Console Agent to examine the error. Then correct the cause of the error according to the check results.

KAVC6211-E
Cannot connect because the number of connections exceeded the maximum at the monitoring destination.

The system cannot display the status because the number of connections to JP1/AJS3 Console Agent at the monitoring destination exceeded the maximum and thus JP1/AJS3 Console Manager at the connection destination cannot connect to JP1/AJS3 Console Agent at the monitoring destination.

(S)

Sets Unknown as the status of the object and continues processing.

(O)

If two or more JP1/AJS3 Console View programs are being used to monitor tasks in the same business root scope, log off from the unnecessary instance of JP1/AJS3 Console View. If there are two or more objects to be monitored on the same host, specify the same name for Host name for each monitored object.

You can change the maximum number of connections in the environment settings for JP1/AJS3 Console Agent. Set a value in the MAXSESSION environment setting parameter.

KAVC6212-E
Communication access was denied at the monitoring destination.

The system cannot display the status because the JP1/Base settings on the monitoring destination host disable communication with the host name or IP address that was specified in the Define Details dialog box as the name of the host to be monitored, and thus connection cannot be made.

(S)

Sets Unknown as the status of the object and continues processing.

(O)

Check whether the JP1/Base settings on the monitoring destination host specify the IP binding method for the binding method on the receiving side for physical hosts. If the IP binding method is set, specify the IP address assigned to the name of the host to be monitored in the Define Details dialog box, or specify a host name that can be associated with the IP address.

KAVC6222-E
User mapping failed. The user was not associated with an OS user at the monitoring destination.

The system cannot display the status because user mapping failed at the monitoring destination. The following lists the possible causes.

In the JP1/Base user mapping settings on the monitoring destination host, no OS user has been mapped to the JP1 user from JP1/AJS3 Console Manager at the connection destination.

In the JP1/Base user mapping settings for the monitoring destination host, the OS user mapped to the JP1 user has been deleted from the OS settings or the password has been changed.

In the JP1/Base password management settings on the monitoring destination host, the OS user to be mapped to the JP1 user has not been registered.

In the JP1/Base user mapping settings on the monitoring destination host, if the host name for JP1/AJS3 Console Manager is specified as a server host name, the host name for JP1/AJS3 Console Manager cannot be determined to be a host name.

(S)

Sets Unknown as the status of the object and continues processing.

(O)

Correct the cause of the error.

KAVC6231-E
An error occurred in JP1/Base at the monitoring destination.

The system cannot display the status because an error occurred in JP1/Base on the monitoring destination host.

(S)

Sets Unknown as the status of the object and continues processing.

(O)

Use log information such as the Windows event log or the syslog in the host for JP1/AJS3 Console Agent at the monitoring destination to examine the error. Then correct the cause of the error according to the result of the check.

KAVC6232-E
JP1/AJS3 Console Agent service needs the required permission.

The system cannot display the status because the JP1/AJS3 Console Agent service on the monitoring destination host does not have permission to perform processing.

(S)

Sets Unknown as the status of the object and continues processing.

(O)

Check the permission of the JP1/AJS3 Console Agent service on the monitoring destination host.

In Windows:
Check that the account of the JP1/AJS3 Console Agent service is a local-system account.
If the account is a user account, see 4.2.3 Changing the JP1/AJS3 service settings (Windows only) in the Job Management Partner 1/Automatic Job Management System 3 System Design (Configuration) Guide and make sure that the specified user has the privileges required for the service.

In UNIX:
Check that the user who executes ajscainetd is a superuser.

KAVC6241-E
The status could not be obtained at the monitoring destination.

The system cannot display the status because status information could not be obtained in JP1/AJS3 Console Agent on the monitoring destination host.

(S)

Sets Unknown as the status of the object and continues processing.

(O)

Check whether JP1/AJS3 - Manager has been installed correctly on the monitoring destination host.

If JP1/AJS3 - Manager on the monitoring destination host is running in a cluster configuration, this message may appear, triggered by a failover. In this case, wait until the failover finishes, and then choose View and then Refresh.

KAVC6242-E
The specified scheduler service does not exist.

The system cannot display the status because the specified scheduler service does not exist on JP1/AJS3 - Manager on the monitoring destination host, or because JP1/AJS3 - Manager has not been set up on the host to be monitored.

(S)

Sets Unknown as the status of the object and continues processing.

(O)

Specify the correct scheduler service name in AJS3 unit name in the Define Details dialog box.

Also make sure that JP1/AJS3 - Manager has been set up on the host specified in Host name.

KAVC6243-E
The object to monitor is specified incorrectly.

The system cannot display the status because the data entered in the monitored-object option in the Define Details dialog box contains format errors.

(S)

Sets Unknown as the status of the object and continues processing.

(O)

For an AJS3 unit-monitored object, specify the monitored object (AJS3 unit name) in the Define Details dialog box as follows:

scheduler-service-name:/unit-name

KAVC6251-E
The specified monitoring method is not supported.

In JP1/AJS3 Console Agent on the host at the monitoring destination, monitoring cannot be performed by using the monitoring method specified in Monitoring Properties.

(S)

Sets Unknown as the status of the object and continues processing.

(O)

Upgrade JP1/AJS3 - Manager at the monitoring destination to the version that supports the monitoring method specified in Monitoring Properties. Alternatively, in Monitoring Properties, specify the monitoring method that JP1/AJS3 - Manager at the monitoring destination supports.

JP1/AJS3 - Manager 06-71 at the monitoring destination only supports the following monitoring methods:

Prioritize current time

Prioritize all unit times

KAVC6252-E
The specified monitored object-classification is not supported.

The specified object to be monitored cannot be monitored or used in JP1/AJS3 Console Agent on the monitoring destination host.

(S)

Sets Unknown as the status of the object and continues processing if the error occurred during status acquisition. If the error occurred during an operation, the system determines that the operation is an error and continues processing.

(O)

Upgrade the version of JP1/AJS3 - Manager at the monitoring destination to the version that supports the monitoring or operation of the object to be monitored.

KAVC6301-E
The operation function is not supported at the monitoring destination.

JP1/AJS3 Console Agent on the monitoring destination host does not support the operation function.

(S)

Continues processing, determining the operation to be an error.

(O)

Upgrade the version of JP1/AJS3 - Manager at the monitoring destination to the version that supports the operation function.

Note that JP1/AJS2 - Manager 06-71 at the monitoring destination does not support the operation function.

KAVC6302-E
The operation function is not enabled at the monitoring destination.

The settings in JP1/AJS3 Console Agent on the monitoring destination host disable the operation function.

(S)

Continues processing, determining the operation to be an error.

(O)

In the environment settings for JP1/AJS3 Console Agent at the monitoring destination, specify yes for the ENABLEOPERATION environment setting parameter.

KAVC6303-E
The specified operation is not possible at the monitoring destination.

The specified operation cannot be performed in the environment of JP1/AJS3 Console Agent on the monitoring destination host.

(S)

Continues processing, determining the operation to be an error.

(O)

Make sure that JP1/AJS3 - Manager at the monitoring destination has been installed correctly.

[Contents][Back][Next]

[Trademarks]